4-氧代-3（4H）-喹唑啉-5-羧酸的合成

以2-氨基-6-甲基苯甲酸为起始原料,通过合环反应生成两种4-氧代-3(4H)-喹唑啉-5-羧酸衍生物(1a, 1b), 1a, 1b分别经高锰酸钾氧化合成了4-氧代-3(4H)-喹唑啉-5-羧酸（2a, 2b）,其结构经¹H NMR, ¹³C NMR和MS表征。研究了投料比｛r［n(高锰酸钾) :n(5-甲基-3(4H)-喹唑啉-4-酮)］｝和反应温度等对收率的影响。结果表明：在最佳反应条件（r=7:1,中性高锰酸钾氧化,于90 ℃反应）下合成2总收率可达66%。     

高锰酸钾氧化法合成2-甲酸吡啶

以2-甲基吡啶为原料,水为溶剂,经80℃下高锰酸钾氧化和乙醇重结晶得到2-甲酸吡啶;采用红外光谱仪和核磁共振谱仪表征了目标产物的结构;考察了高锰酸钾用量、溶剂用量和反应时间对产物收率的影响,讨论了重结晶试剂的选择,进而确定了合成2-甲酸吡啶的较优条件.结果表明:以水作反应溶剂,控制原料和高锰酸钾的摩尔比为1∶2.3时,反应时间为5~6 h,以乙醇重结晶,目标产物的总收率达79.7%.     

2-羟基-4,6-二甲基嘧啶盐酸盐制备方法的改进

针对目前文献中报道的2-羟基-4,6-二甲基嘧啶盐酸盐的合成存在加料繁琐、收率低等问题,我们在合成时对加料方式、反应过程、产物分离三方面做了改进,简化了加料过程,相同条件下收率提高了10%。对改进后的方法进行了参数优化,65℃时反应48h收率达91.3%。     

2-(2-甲基苯基)-2-氧代乙酸甲酯的合成

2-甲基苯乙酮经高锰酸钾选择性氧化生成2-(2-甲基苯基)-2-氧代乙酸,然后用甲醇酯化得到2-(2-甲基苯基)-2-氧代乙酸甲酯,总收率65%。     

星点设计-效应面优化法优化2-(3-羟基-1-金刚烷基)-2-乙醛酸的合成工艺

采用星点设计-效应面优化法对2-金刚烷基乙醛酸5合成2-(3-羟基-1-金刚烷基)-2-乙醛酸6的因素进行考证,以提高化合物6的收率。以金刚烷甲酸1为起始原料,酰氯化后与丙二酸二乙酯钠盐缩合,脱羧得到乙酰金刚烷4,4经两步高锰酸钾氧化分别得5和6。化合物5到6的氧化反应是关键步骤,通过单因素考察法对化合物5合成6的工艺影响因素进行初步考察,并用星点设计-效应面优化法对显著性因素进行优化和多元线性回归与二项式方程拟合。优化后的化合物4到6的工艺总收率由文献报道的30%～40%提高到57.8%。星点设计-效应面优化法是一种简便、可行的工艺优化方法。     

吡嗪类葡萄糖激酶激动剂中间体5-氯吡嗪-2-羧酸的合成

以2-乙酰基呋喃为原料,经二氧化硒氧化、与甘氨酰胺环合、三氯氧磷氯化、高锰酸钾氧化等步骤合成了吡嗪类葡萄糖激酶激动剂中间体5-氯吡嗪-2-羧酸。考察了环合反应中反应温度、反应时间等反应影响因素,并对通过正交试验法进行了优化,结果表明当反应时间3 h、温度10℃、甘氨酰胺盐酸盐与氢氧化钠的摩尔比为1∶2.5时环合收率最佳,较文献提高23.1%。最后一步合成得到5-氯吡嗪-2-羧酸中,采用盐酸酸化乙酸乙酯提取法代替使用价格昂贵的阳离子交换柱,收率74.8%与文献值相当,操作简单,价格低廉。     

基于4,6-二甲基-2-巯基嘧啶结构的联烯衍生物的合成及抗菌活性研究

以4,6-二甲基-2-巯基嘧啶、3-溴丙炔和取代苯甲醛为原料,经过亲核取代和加成反应,以42～78%的分离收率得到了11个4-((4,6-二甲基嘧啶-2-基)硫代)-1-(取代苯基)-2-丁炔基乙酸酯衍生物3(a-k)。在金属镍的催化下,4-((4,6-二甲基嘧啶-2-基)硫代)-1-(取代苯基)-2-丁炔基乙酸酯衍生物(3)与三甲基铝发生S_N2’取代反应合成了11个含有4,6-二甲基-2-巯基嘧啶结构的联烯衍生物4(a-k)。探讨了各种反应条件对目标产物收率的影响,并且对这些条件进行了优化。结果表明,在60℃,四氢呋喃作溶剂,碳酸钾作碱,用2mol%NiCl_2/4mol%PPh_3催化三甲基铝试剂与4-((4,6-二甲基嘧啶-2-基)硫代)-1-(取代苯基)-2-丁炔基乙酸酯衍生物(3)进行S_N2’取代反应,可以顺利地以22～63%的分离收率得到含有4,6-二甲基-2-硫基嘧啶结构的联烯衍生物。所有目标化合物均经~1H(~(13)C)NMR,IR,HRMS分析对其结构进行确证。该类化合物的合成方法具有操作简单和反应条件温和的优点。经体外活性测试表明有5个化合物对大肠杆菌有一定的抑制作用,其最小抑制浓度可达4 ug·mL~(-1)。     

4,6-二甲基-2-甲磺酰基嘧啶的绿色合成

以4,6-二甲基-2-巯基嘧啶(DLMP)为起始原料,经过甲基化和氧化反应2步合成4,6-二甲基-2-甲磺酰基嘧啶,总收率86.7%,所用原料绿色环保。甲基化一步中使用碳酸二甲酯(DMC)为甲基化试剂,离子液[Bmim]Cl为溶剂和催化剂,反应最佳配比为:n(DLMP):n(DMC):n([Bmim]Cl)=1:1.5:2,110℃下反应3h,收率93.5%。[Bmim]Cl重复使用4次,收率略微下降。     

6-亚甲基-17α-乙酰氧基-18-甲基-19-失碳-孕甾-4-烯-3,20-二酮的合成新方法研究

报道了16-亚甲基-17α-乙酰氧基-18-甲基-19-失碳-孕甾-4-烯-3,20-二酮的新合成方法. 以左旋18-甲基炔诺酮为原料, 通过脱水、氧化、环合、热解、环氧化、开环氧环、水解七步反应合成了目标化合物, 总收率20.0%. 其中化合物12, 13, 14, 15, 16尚未见文献报道.     

5-甲基异噁唑-3-甲酰胺合成工艺的改进

讨论了以草酸二乙酯为原料 ,经过克莱森缩合、环合、氨解反应合成 5 甲基异唑 3 甲酰胺工艺的改进。各部收率均高于文献报道收率 ,总收率由原工艺的 40 %提高到现工艺的 57%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.