3(1,3-Heterazolidin-3-yl-methyl)-1,3-oxazolidines and their reduction with borane–THF

Preparation of bis-heterazolidines bonded by a CH₂, CH₂–S–CH₂ or CH₂SCH₂SCH₂ groups through their nitrogen atoms is reported: 3-(1,3-oxazolidin-3-ylmethyl)-1,3-oxazolidine 1, 3-(4,4-dimethyl-1,3-oxazolidin-3-ylmethyl)-1,3-oxazolidine 2, 3-(1,3-diazolidin-3-ylmethyl)-1,3-diazolidine 3, 3-(1,3-thiazolidin-3-ylmethyl)-1,3-thiazolidine 4, 3-(1,3-thiazolidin-3-ylmethylsulfanylmethyl)-1,3-thiazolidine 5 and 3-(1,3-oxazolidin-3-ylmethylsulfanylmethyl-sulfanylmethyl)-1,3-oxazolidine 6. The solid state structures of 4 and 5 were determined by X-ray diffraction analyses. BH₃–THF reduction reactions of compounds 1–6 were investigated. N→BH₃ mono- and di-adducts of 1–6 were prepared and their structures calculated (ab initio 3-21G*).     

New liquid crystal compounds ( )-4-[5-(2-Methylbutyl)-1,3-dioxan-2-yl]phenyl 4-alkoxybenzoate

New liquid crystal compounds, (+)-4-[5-(2-methylbutyl)-1,3-dioxan-2-yl] phenyl 4-alkoxybenzoates (5), were synthesized. The mesomorphic behaviour of these compounds is compared with that of (+)-4-(5-alkyl-1,3-dioxan-2-yl)-phenyl 4-(2-methylbutoxy)benzoates (6). While compounds 6 exhibited a chiral smectic C phase, the corresponding compounds 5 did not. This might mean that for the appearance of a chiral smectic C phase in these types of compounds, it is necessary that the carbonyl and the chiral groups exist at nearby positions. Transition temperatures to those isotropic state for compounds 5 were lower than those for compounds 6. This result is common in both cases of (+)-4-alkoxycarbonylphenyl-4-[5-(2-methylbutyl)-1,3-dioxan-2-yl]benzoates (7), and (+)-4-(2-methylbutoxy-carbonyl)phenyl 4-(5-alkyl-1,3-dioxan-2-yl)-benzoates (8).     

1,3-dialkyl- and 1,3-diaryl-3,4,5,6-tetrahydropyrimidin-2-ylidene rhodium(i) and palladium(II) complexes: synthesis, structure, and reactivity

The synthesis of novel 1,3-diaryl- and 1,3-dialkylpyrimidin-2-ylidene-based N-heterocyclic carbenes (NHCs) and their rhodium(i) and palladium(II) complexes is described. The rhodium compounds bromo(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (7), bromo(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (8) (cod=eta(4)-1,5-cyclooctadiene, mesityl=2,4,6-trimethylphenyl), chloro(cod)(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (9), and chloro(cod)[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (10) were prepared by reaction of [[Rh(cod)Cl](2)] with lithium tert-butoxide followed by addition of 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium bromide (3), 1,3-dimesityl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate (4), 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium bromide (6), and 1,3-di-2-propyl-3,4,5,6-tetrahydropyrimidinium tetrafluoroborate, respectively. Complex 7 crystallizes in the monoclinic space group P2(1)/n, and 8 in the monoclinic space group P2(1). Complexes 9 and 10 were used for the synthesis of the corresponding dicarbonyl complexes dicarbonylchloro(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)rhodium (11), and dicarbonylchloro[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene]rhodium (12). The wavenumbers nu(CO I)/nu(CO II) for 11 and 12 were used as a quantitative measure for the basicity of the NHC ligand. The values of 2062/1976 and 2063/1982 cm(-1), respectively, indicate that the new NHCs are among the most basic cyclic ligands reported so far. Compounds 3 and 6 were additionally converted to the corresponding cationic silver(i) bis-NHC complexes [Ag(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]AgBr(2) (13) and [Ag[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene](2)]AgBr(2) (14), which were subsequently used in transmetalation reactions for the synthesis of the corresponding palladium(II) complexes Pd(1,3-dimesityl-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2) (2+)(Ag(2)Br(2)Cl(4) (4-))(1/2) (15) and Pd[1,3-bis(2-propyl)-3,4,5,6-tetrahydropyrimidin-2-ylidene)(2)]Cl(2) (16). Complex 15 crystallizes in the monoclinic space group P2(1)/c, and 16 in the monoclinic space group C(2)/c. The catalytic activity of 15 and 16 in Heck-type reactions was studied in detail. Both compounds are highly active in the coupling of aliphatic and aromatic vinyl compounds with aryl bromides and chlorides with turnover numbers (TONs) up to 2000000. Stabilities of 15 and 16 under Heck-couplings conditions were correlated with their molecular structure. Finally, selected kinetic data for these couplings are presented.     

1-(2-Quinoxalyl)-, 1-[3,5-Di(trifluoromethyl)phenyl]-, 1-(2-Carboxyphenyl)-, and 1-Ethoxycarbonyl-4-oxo-4,5,6,7-tetrahydroindazoles

The corresponding 1-(2-quinoxalyl)-, 1-[3,5-di(trifluoromethyl)phenyl]-, and 1-ethoxycarbonyl-3-methyl-4-oxo-4,5,6,7-tetrahydroindazoles have been obtained from reactions of 2-acetyl-1,3-cyclohexanedione, its 5,5-dimethyl and 5-(2-furyl) derivatives, with 2-hydrazinoquinoxaline, 3,5-di(trifluoromethyl)phenylhydrazine, and ethoxycarbonylhydrazine. On interaction with ethoxycarbonylhydrazine the intermediate 2-[1-(-ethoxycarbonyl)hydrazino]ethylidene-1,3-cyclohexanediones were also isolated. From the potassium salt of 2-formyldimedone and 2-carboxyphenylhydrazine hydrochloride, 2-(2-carboxyphenyl)hydrazinomethylene-5,5-dimethyl-1,3-cyclohexanedione was obtained, the cyclization of which in ethanol in the presence of HCl led to 1-(2-carboxyphenyl)- and 1-(2-ethoxycarbonylphenyl)-6,6-dimethyl-4-oxo-4,5,6,7-tetrahydroindazole.     

Synthesis of new 2-(alkenylsulfanyl)pyrimidine derivatives

Isothiuronium salts prepared by treatment of allyl bromide, 2,3- and 1,3-dichloropropenes, and 1,3-dichlorobut-2-ene with thiourea reacted with pentane-2,4-dione and 4,4,4-trifluoro-1-(thiophen-2-yl)-butane-1,3-dione to afford new pyrimidine derivatives, 2-(alkenylsulfanyl)-4,6-dimethyl- and 2-(alkenylsulfanyl)-4-(thiophen-2-yl)-6-(trifluoromethyl)pyrimidines.     

2-(1,2-亚乙/1,3-亚丙二硫)亚甲基-3-羰基丁酰氯的制备及其与芳烃的酰化反应

制备了较稳定的2-(1,2-亚乙/1,3-亚丙二硫)亚甲基-3-羰基丁酰氯,并实现了其与芳烃的酰化反应,为1-芳基-2-(1,2-亚乙/1,3-亚丙二硫)亚甲基-1,3-丁二酮的合成提供了一条新途径.     

New π-electron donors: Ethanediylidene-2,2′-bis(1,3-diselenole) and ethanediylidene-2-(1,3-dithiole)-2′-(1,3-diselenole)

This communication describes synthesis and electrochemical properties of new type of π-donors containing 1,3-diselenole ring, ethanediylidene-2,2′-bis(1,3-diselenole)(1a) and ethanediylidene-2-(1,3-dithiole)-2′-(1,3-diselenole)(2a). The conductivities of the charge-transfer complexes of these donors with tetracyanoquinodimethane (TCNQ) are also demonstrated.     

Preparation of palladium complexes of 1,3-di(2-pyridyl)propane derivatives and their use in norbornene polymerization

A variety of neutral palladium(II) complexes [Pd(L–L)Cl₂] containing 1,3-di(2-pyridyl)propane (1), 1,3-bis(2-pyridyl)-2-pentylpropane (2), 1,3-bis(2-pyridyl)-2-phenylpropane (3a), 1,3-bis(2-pyridyl)-2-tolylpropane (4), and 1,3-bis(2-pyridyl)-2-ferrocenylpropane (5) as chelate ligands (L–L) have been synthesized. The crystal structures of 1,3-diphenyl-2,4-di-pyridin-2-yl-butan-1-ol (3b), 5, [(2)PdCl₂], [(4)PdCl₂], and [(5)PdCl₂] have been determined and show a square planar geometry at palladium(II). The neutral complexes were tested in the polymerization of norbornene and copolymerization of norbornene with norbornene derivatives. The complex bearing the pentyl group exhibited high reactivity to give up to 5.9×10⁵ in molecular weight for the homopolymerization. When [(4)PdCl₂] or [(5)PdCl₂] was used as a catalyst, homopolymers insoluble at 150 °C in trichlorobenzene were obtained. However, copolymerization of norbornene with norbornene derivatives 8a–d catalyzed by [(4)PdCl₂] gave soluble copolymers with molecular weights up to 5.1×10⁵.     

DFT-calculation of the structural isomers of (1-methyl-4-phenyl-1-azabuta-1,3-diene)tetracarbonyliron(0) and (4-phenyl-1-oxabuta-1,3-diene)tetracarbonyliron(0)

DFT calculations (B3LYP/LANL2DZ/6-31 G*) were used to investigate the ways in which 1-methyl-4-phenyl-1-azabuta-1,3-diene and 4-phenyl-1-oxabuta-1,3-diene bind to a Fe(CO)(4) moiety. As possible coordination modes, eta(2)-coordination across the C=C or C=N/C=O bond, sigma-coordination to the lone pair of the heteroatom, or eta(3)-coordination through the C=C-C or the N=C-C/O=C-C moiety were considered. The latter forms involve coupling of the non-coordinated atom of the heterodiene with one of the carbonyl ligands to an acyl species. The calculated geometric parameters of all structures compare well with X-ray crystallographic data of similar complexes. The species in which the ligand is transoid and sigma-coordinated is lowest in energy, for both compounds studied. However, the eta(2)-alkene bound 1-oxabuta-1,3-diene complex is practically equal in energy to the sigma-transoid form and thus competes. This agrees with experimental observations that the heterodiene is sigma-bonded in Fe(CO)(4)(1-methyl-4-phenyl-1-azabuta-1,3-diene) but eta(2)-coordinated in Fe(CO)(4)(4-phenyl-1-oxabuta-1,3-diene). The solvent dependence was estimated from single point PCM calculations, for CH(2)Cl(2) as solvent. For the 1-azabuta-1,3-diene complexes, the relative energies of eta(2)-olefin and eta(3)-allyl forms are inverted, with the eta(3)-allyl form being more stable in polar solvents. The 1-oxabuta-1,3-diene complexes in their eta(2)-olefin and sigma-O forms change order of relative energy, and conversion to the sigma-O form is expected in a polar medium for these complexes. Calculated IR vibrational stretching frequencies of the carbonyl ligands and the C[double bond, length as m-dash]N/C[double bond, length as m-dash]O bond were compared with experimental data, to produce the best fits for the sigma-transoid form of Fe(CO)(4)(1-methyl-4-phenyl-1-azabuta-1,3-diene) and eta(2)-olefin bonded Fe(CO)(4)(4-phenyl-1-oxabuta-1,3-diene). These results are again consistent with the experiment and show that the DFT method applied in this work can be used as an aid for structural validation.     

4,5-Dihydroxyimidazolidin-2-ones in the α-ureidoalkylation reaction of N-(carboxyalkyl)-, N-(hydroxyalkyl)-, and N-(aminoalkyl)ureas 1. α-Ureidoalkylation of N-(carboxyalkyl)ureas

Russian Chemical Bulletin - The α-ureidoalkylation of N-(carboxyalkyl)ureas (ureido acids) with 1,3-H2 s-, 1,3-Me 2 s-, and 1,3-Et2 s-4,5-dihydroxyimidazolidin-2-ones was systematically...     

Determination of molybdenum(VI) by differential pulse polarographic technique using 4-(2-hydroxy phenyl ethaminodiol), benzene-1,3-diol(4-2-HPEDB-1,3,D)

A novel analytical reagent 4-(2-hydroxy phenyl ethaminodiol), benzene-1,3-diol(4-2-HPEDB-1,3,D) was synthesized for the determination of molybdenum(VI). The present paper reveals the detailed study of electroanalytical behaviour for [Mo-(4-2-HPEDB-1,3,D)] complex under optimized conditions. The peak obtained for [Mo-(4-2-HPEDB-1,3,D)] prevent the interference of foreign ions which shows the sensitivity of the proposed method. The linearity was maintained at the concentration range of 0.5–200 μg/mL at pH 4.5 with correlation factor 0.9997. The present method was successfully applied for the analysis of molybdenum(VI) in biological fluids and plant material. The results obtained from the proposed method show good agreement with reference method.     

5-nitro-5-(1′-cyclohexenyl)- and 5-nitro-5-(1′-cycloheptenyl)-3-benzyl- and 3-cyclohexyl tetrahydro-1,3-oxazines

1-(Cyclohexenyl- and 1-cycloheptenylnitromethane have been used as starting substances to yield 2-nitro-2-(1′-cyclohexenyl)- and 2-nitro-2-(1′-cycloheptenyl)-propanediol-1,3 (B) respectively. By reacting them with formaldehyde and benzylamine or formaldehydes and cyclohexylamine, derivatives of tetrahydro-1,3-oxazine (B) have been prepared. Acid hydrolysis of tetrahydro-1,3-oxazine derivatives results in the formation of 3-hydroxy-2-nitro-2-(1′-cyclohexenyl)- and 3-hydroxy-2-nitro-2-(1′-cycloheptenyl)-propylamine derivatives (E). Both aminoalcohols (E) react with formaldehyde to again yield tetrahydro-1,3-oxazine derivatives (C).

Infra-red spectra of C and E and their hydrochlorides D and F were examined and structure assignments made of the principal bands.     

New Cycloadditon Reaction of 2-Chloroprop-2-enethioamides with Dialkyl Acetylenedicarboxylates: Synthesis of Dialkyl 2-[4,5-bis(alkoxycarbonyl)-2-(aryl{alkyl}imino)-3(2H)-thienylidene]-1,3-dithiole-4,5-dicarboxylates

The 1,3-dipolar cycloaddition of 1,2-dithiole-3-thiones with alkynes to form 1,3-dithioles is one of the most studied reactions in this class of polysulfur-containing heterocycles. Nucleophilic substitution of chlorine atoms in dimethyl 2-(1,2-dichloro-2-thioxoethylidene)-1,3-dithiole-4,5-dicarboxylate, which was obtained by addition one molecules of DMAD to 4,5-dichloro-3H-1,2-dithiole-3-thione, led to a series of 2-chloro-2-(1,3-dithiol-2-ylidene)ethanethioamides. Cycloaddition reaction of 2-chloro-2-(1,3-dithiol-2-ylidene)ethanethioamides with activated alkynes led to the unexpected formation of 2-(thiophen-3(2H)-ylidene)-1,3-dithioles via new intermediate, 1-(1,3-dithiol-2-ylidene)-N-phenylethan-1-yliumimidothioate. Structure of dimethyl 2-(4,5-bis(methoxycarbonyl)-2-(phenylimino)thiophen-3(2H)-ylidene)-1,3-dithiole-4,5-dicarboxylate was finally proven by single crystal X-ray diffraction study. Optimized reaction conditions and a mechanistic rationale for the 1,3-dipolar cycloaddition of novel intermediate are presented.     

Synthesis of 3-(Organyloxymethyl)oxazolidines

Russian Journal of Organic Chemistry - The condensation/heterocyclization of 2-aminoethanol with formaldehyde and various alcohols afforded 3-(organyloxymethyl)-1,3-oxazolidines. Their yields...     

New electron donor — Bis(3-oxy-1,5-dithiapentano)tetrathiafulvalene

The reactions of bis(tetrabutylammonium)bis(1,3-dithiole-2-thione-4,5-dithiolato)zincate with dichlorinated ethers and thioethers gave derivatives of the 1,3-dithiole-2-thione that were used for the synthesis of the corresponding 1,3-dithiole-2-ones and 1,3-dithiole-2-selenones. A new electron donor, bis-(3-oxy-1,5-dithiapentano)tetrathiafulvalene, was obtained from 4,5-(3-oxa-1,5-dithiapentane)-1,3-dithiole-2-one.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1483–1485, November, 1987.     

Synthesis and Thermal Reaction of 1,3-Bis(alkylseleno)allenes

Reactions of Ph(2)C(3) dianion, prepared from 1,3-diphenylpropyne and n-butyllithium, with dimethyl diselenide and benzylselenocyanate yielded 1,3-bis(methylseleno)-1,3-diphenylpropadiene and 1,3-bis(benzylseleno)-1,3-diphenylpropadiene, respectively, and the reaction with a mixture of dimethyl diselenide and benzylselenocyanate gave 1-benzylseleno-3-methylseleno-1,3-diphenylpropadiene together with the symmetric products. Thermal reactions of the 1,3-bis(alkylseleno)allenes afforded (E)- and (Z)-1,3,4,6-tetraphenyl-3-hexene-1,5-diynes along with compounds derived from cyclic dimer of the allene or diselenide via radical pathway.     

Nitrate and perchlorate salts of a silver(I) complex from 5-methyl-2-(2,3-diaza-4-(5-methyl-2-thienyl)buta-1,3-dienyl)thiophene

Bis(5-methyl-2-(2,3-diaza-4-(5-methyl-2-thienyl)buta-1,3-dienyl)thiophene) silver(I) complex was synthesized in high yield by refluxing 5-methyl-2-(2,3-diaza-4-(5-methyl-2-thienyl)buta-1,3-dienyl)thiophene (L) with silver nitrate or silver perchlorate in anhydrous acetonitrile. The product thus formed was well characterized by NMR, IR, UV–Vis and mass spectroscopies as well as elemental analysis and electrochemical analysis. Molecular structures of compounds L, [L₂Ag]NO₃ and [L₂Ag]ClO₄ were determined by single crystal X-ray diffraction analysis. It was found that the C=N double bond of the ligand rotated during the course of ligand coordination in the case of the perchlorate salt but not in the case of the nitrate salt.     

pi-Indenyl tin(II) and lead(II) compounds

The syntheses and structures of the first indenyl-substituted tin(II) complexes, [Sn{1,3-(SiMe3)2C9H5}2] and [Sn(C5Me5)-{1,3-(SiMe3)2C9H5}], are described; the lead(II) analogue of the latter compound has also been prepared and structurally characterized.     

(1,3-Dimethyluracil-5-yl)mercury(II): Preparative, Structural, and NMR Spectroscopic Studies of an Analog of CH(3)Hg(II)

The solution behavior of (1,3-DimeU-C5)Hg(CH(3)COO) (1a) (1,3-DimeU = 1,3-dimethyluracil) with regard to acetate replacement by anions X (Cl(-), Br(-), I(-), NO(3)(-), SCN(-), CN(-)) and by other model nucleobases (1-methylcytosine, 1-MeC, 1-methyluracil, 1-MeUH, 1-methylthymine, 1-MeTH, 9-ethylguanine, 9-EtGH, and 2-thiouracil, 2-ThioUH) has been studied, primarily by means of (1)H and (199)Hg NMR spectroscopy. Moreover, the bis(1,3-DimeU-C5) complex of Hg has been crystallized and studied by X-ray crystallography. 7a: orthorhombic system, space group Fdd2, a = 14.185(4) ?, b = 25.275(7) ?, c = 7.924(2) ?, V = 2840(2) ?(3), Z = 8. The acetato ligand of 1a is readily displaced by anions X, frequently followed by disproportionation reactions leading to HgX(2) and 7a. The donor atom X trans to C(5) has an effect on (3)J coupling between (199)Hg and H(6) of the 1,3-DimeU ligand according to NO(3)(-) > OAc(-) > Cl(-) approximately Br(-) > I(-) > SCN(-) > CN(-) > 1,3-DimeU-C5 with extremes being 222 (X = NO(3)(-)) and 107 Hz (7a). In the presence of excess metal ions (Ag(+), Hg(2+)), 1a forms hetero- and homonuclear derivatives with the second metal ion probably sitting at O(4). The mixed nucleobase complexes have the second base bound to Hg via N(3) (1-MeU (2a), 1-MeT (3a)), N(4) (1-MeC(-) (4a), 1-MeC (4b)), N(1) (9-EtG (5a)), N(7) (9-EtGH (5b)), and N(1), N(7) (9-EtG (5c)), as well as S(2) (2-ThioU (6a)). With the exception of the 9-ethylguanine complexes 5b and 5c, all the other complexes are inert on the (1)H time scale. In several cases, e.g. 2a, 3a, 4a, and 5a, formation of dinuclear Hg or heteronuclear Ag and Pt derivatives has been established by multinuclear NMR spectroscopy.     

Total synthesis of (-)-cocaine and (-)-ferruginine

Total synthesis of tropane alkaloids (-)-cocaine and (-)-ferruginine were accomplished in nine steps each and in 55% and 46% overall yields, respectively, starting from the known Betti base derivative (+)-(7aR,10R,12S)-10-(1H-benzotriazol-1-yl)-7a,8,9,10-tetrahydro-12-phenyl-12H-naphtho[1,2-e]pyrrolo[2,1-b][1,3]oxazine. In this novel route, RCM reaction and 1,3-dipolar cycloaddition were employed as key steps for the enantioselective construction of tropane skeleton and the regioselective introduction of 3-bromo-2-isoxazoline ring as masked cis-2,3-disubstituents. To obtain the desired precursor (2S,5R)-2-allyl-5-vinylpyrrolidine for RCM reaction, we developed a general and practical method for the preparation of enantiopure cis-2,5-disubstituted pyrrolidines bearing alkene- and/or alkyne-containing substituents. We also offered two highly efficient pathways for the conversion of the 3-bromo-2-isoxazoline ring into the desired cis-2,3-disubstituted groups in (-)-cocaine and (-)-ferruginine.