Coal-tar pitch characterization by thin-layer chromatography with flame ionization detection

Summary A rapid and quantitative method for compound class characterization of coal-tar pitches without previous fractionation, using an improved TLC method with an FID system, has been developed. Results show adequate accuracy and precision, including the sampling step.A fast calibration method, based on a variation of the internal normalization procedure, can be used for up to 18 g of whole sample application, avoiding the usually tedious absolute calibration in such analyses. This range is more than sufficient in view of the small amounts usually spotted in this technique.Speed of sample application by autospotter influences the shape of the peak nearest the point of application. For the coal tar pitch studied (9 wt.% non-eluted), slow application (0.5 L min^–1) gives a non-eluted Gaussianintegratable peak. A faster speed (10 L min^–1) is usable for analysing fossil products with lower non-eluted content. Total analysis time is less than 2 h, a considerably improvement on current methods.     

Calibration of thin-layer chromatography with flame ionization detection for the analysis of natural lipid samples

Thin-layer chromatography coupled with flame ionization detection has been used to develop a method to quantitate fish lipids. Quantitation of fractionated lipid classes is usually accomplished through calibration with standards. Our work shows that various standards within a class, such as triglycerides or free fatty acids give substantially different responses to the detector. A method has been developed in which a composite sample of salmon lipid is prepared with an internal standard. This technique eliminates the variable detector response observed for compounds within a class and provides more accurate quantitation of oils from which the calibration samples were prepared. The lipid classes quantitated were triglycerides, free fatty acids, phosphatidylethanolamine and phosphatidylcholine.     

High resolution recycle gas chromatography with off-line flame ionization detection

Preliminary results of a recycle system employing fused silica capillary columns are discussed. The unit, which can be operated with a pre-column for multidimensional GC, utilizes continuous stream splitting for off-line flame ionization detection. Commercially available rotary valves were used for recirculation of the chromatographic zone between column loops. Adsorptive activity, which is shown to be additive, is a serious limitation in the analysis of polar compounds. The successful application of recycle chromatography to increase resolution on non-polar mixtures is demonstrated.     

Determination of linoleic acid in toothpaste by gas chromatography with flame ionization detection.

A new method for the determination of linoleic acid (LA) in toothpaste by a routine analysis has been proposed. Studies were based on the ISO 5509 procedure, which was modified for the purpose of LA determination in the toothpaste. Gas chromatography (GC) was employed for the qualitative and quantitative determination of linoleic acid methyl ester. The content of LA (5.31%) in sunflower oil added to the toothpaste composition (0.5%) was determined, and then the optimization studies for the determination of LA in the toothpaste samples were carried out. The relative standard deviation (RSD) of the procedure developed was 9.96% (n = 9). The quantitative analysis showed that the content of LA in the toothpaste samples studied was 0.0258 +/- 0.0011%. The detection limit of LA in toothpaste was approximately 0.001%.     

Stability studies of carbamate pesticides and analysis by gas chromatography with flame ionization and nitrogen-phosphorus detection

As a result of thermal stability studies of carbamate pesticides, a method has been proposed for their direct determination by gas chromatography in the ranges 1-20 and 0.1-1 mg l(-1), using flame ionization and nitrogen-phosphorus detection, respectively. The method allows the determination of propham, propoxur, carbofuran, carbaryl, methiocarb, isopropoxyphenol and naphthol in powdered potato samples. The analytes were previously extracted with a light petroleum-dichloromethane (1:1, v/v) mixture and preconcentred by solid-phase extraction through a C8 cartridge. The recoveries obtained from spiked potato samples (n=4 replicates) at two concentration levels, 10 and 0.5 mg of pesticide per kg of sample, were in the ranges 72-115 and 50-73%, with relative standard deviations of 2-7 and 5-8%, respectively. The detection limits were 50-210 and 41-53 microg kg(-1) with flame ionization and nitrogen-phosphorus detection, respectively, and reaching the maximum residue levels, 0.05 mg kg(-1) for methiocarb and propoxur, set by the Real Decreto 280/1994 (based on the European directive).     

Determination of methacrylonitrile in serum using gas chromatography and flame ionization detection.

A gas chromatographic method is described for the quantitation of methacrylonitrile in serum. Methacrylonitrile was extracted from rat serum with diethyl ether and then quantified using a gas chromatograph equipped with a flame ionization detector and a 60-m megabore column coated with polyethylene glycol polymer. The recoveries obtained following a one-step extraction with diethyl ether varied from 60% at 3.2 micrograms/ml to 70% at 80 micrograms/ml. The coefficient of variation for the analysis ranged from 2.5% at 400 micrograms/ml to 15.0% at 3.2 micrograms/ml.     

Qualitative and quantitative analysis of pyrolysis oil by gas chromatography with flame ionization detection and comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry

Pyrolysis oils have attracted a lot of interest, as they are liquid energy carriers and general sources of chemicals. In this work, gas chromatography with flame ionization detector (GC-FID) and two-dimensional gas chromatography with time-of-flight mass spectrometry (GC×GC-TOFMS) techniques were used to provide both qualitative and quantitative results of the analysis of three different pyrolysis oils. The chromatographic methods and parameters were optimized and solvent choice and separation restrictions are discussed. Pyrolysis oil samples were diluted in suitable organic solvent and were analyzed by GC×GC-TOFMS. An average of 300 compounds were detected and identified in all three samples using the ChromaToF (Leco) software. The deconvoluted spectra were compared with the NIST software library for correct matching. Group type classification was performed by use of the ChromaToF software. The quantification of 11 selected compounds was performed by means of a multiple-point external calibration curve. Afterwards, the pyrolysis oils were extracted with water, and the aqueous phase was analyzed both by GC-FID and, after proper change of solvent, by GC×GC-TOFMS. As previously, the selected compounds were quantified by both techniques, by means of multiple point external calibration curves. The parameters of the calibration curves were calculated by weighted linear regression analysis. The limit of detection, limit of quantitation and linearity range for each standard compound with each method are presented. The potency of GC×GC-TOFMS for an efficient mapping of the pyrolysis oil is undisputable, and the possibility of using it for quantification as well has been demonstrated. On the other hand, the GC-FID analysis provides reliable results that allow for a rapid screening of the pyrolysis oil. To the best of our knowledge, very few papers have been reported with quantification attempts on pyrolysis oil samples using GC×GC-TOFMS most of which make use of the internal standard method. This work provides the ground for further analysis of pyrolysis oils of diverse sources for a rational design of both their production and utilization process.     

棒状薄层色谱-氢火焰离子探测仪检测老化沥青的四组分

沥青老化过程中四组分(饱和分、芳香分、胶质和沥青质)会发生变化,分析沥青在老化过程中四组分的变化有助于揭示沥青的老化机理,科学指导沥青材料的工程应用。分别采用薄膜烘箱试验(TFOT)、压力老化容器(PAV)试验和紫外光(UV)老化试验对沥青进行老化,利用棒状薄层色谱-氢火焰离子探测仪(TLC-FID)检测沥青老化前后的四组分,研究了扩展液组成对沥青四组分测定结果的影响,并与溶剂沉淀及色谱柱法(Corbett法)测定结果进行了对比。通过线性拟合分析了TLC-FID法与Corbett法检测老化沥青四组分的相关性。结果表明,采用二氯甲烷配制沥青溶液,以正庚烷为第一扩展液、甲苯/正庚烷(80:20, v/v)为第二扩展液、甲苯/乙醇(55:45, v/v)为第三扩展液,并利用TLC-FID方法检测老化沥青的四组分较为合适。该方法对于沥青四组分的分析及沥青老化机理的研究具有重要意义。     

Quantitative and fingerprinting analysis of Atractylodes rhizome based on gas chromatography with flame ionization detection combined with chemometrics

This study assessed the feasibility of gas chromatography with flame ionization detection fingerprinting combined with chemometrics for quality analysis of Atractylodes rhizome. We extracted essential oils from 20 Atractylodes lancea and Atractylodes koreana samples by hydrodistillation. The variation in extraction yields (1.33–4.06%) suggested that contents of the essential oils differed between species. The volatile components (atractylon, atractydin, and atractylenolide I, II, and III) were quantified by gas chromatography with flame ionization detection and confirmed by gas chromatography with mass spectrometry, and the results demonstrated that the number and content of volatile components differed between A. lancea and A. koreana. We then calculated the relative peak areas of common components and similarities of samples by comparing the chromatograms of A. lancea and A. koreana extracts. Also, we employed several chemometric techniques, including similarity analysis, hierarchical clustering analysis, principal component analysis, and partial least‐squares discriminate analysis, to analyze the samples. Results were consistent across analytical methods and showed that samples could be separated according to species. Five volatile components in the essential oils were quantified to further validate the results of the multivariate statistical analysis. The method is simple, stable, accurate, and reproducible. Our results provide a foundation for quality control analysis of A. lancea and A. koreana.     

Sample preparation methods for beeswax characterization by gas chromatography with flame ionization detection

New and simpler methods of sample preparation to determine several families of compounds in beeswax by conventional and high temperature gas chromatography are proposed. To analyze hydrocarbons and palmitates, a dilution of sample is enough whereas for the total acid content, a hydrolysis and simultaneous methylation with BF3-methanol results more effective than the usual methods; for the total content of alcohols, a further acetylation with acetic anhydride is necessary. Free alcohols are directly acetylated in a sample dissolution but for free acids and monoesterified 1,2,3-propanetriols analysis, a previous extraction with acetonitrile is required. The concentrations of all the compounds studied are expressed in weight percentage referred only to one standard: octadecyl octadecanoate. The precision of the analytical methods has been evaluated showing its importance in the analysis of beeswaxes used in apiculture.     

Determination of dihydroartemisinic acid in Artemisia annua L. by gas chromatography with flame ionization detection

Dihydroartemisinic acid (DHAA) is the direct precursor to artemisinin, an effective anti‐malaria compound from Artemisia annua L. (A. annua ), and it can be transformed to artemisinin without the catalysis of enzyme. A rapid and sensitive analysis of DHAA in A. annua is needed to screen excellent plant resources aimed to improve artemisinin production. In order to develop a rapid and sensitive determination method for DHAA in plant, the extraction and analysis conditions were extensively investigated in the present work. As a result, extraction of powdered A. annua leaves at 55°C for 50 min with chloroform resulted in the highest yield of DHAA, with a recovery of >98%. The precision of this gas chromatographic procedure ranged from 1.22 to 2.94% for intra‐day and from 1.69 to 4.31% for inter‐day, respectively. The accuracy was 99.55–103.02% for intra‐day and 98.86–99.98% for inter‐day, respectively. The measured LOQ and LOD values of the proposed method reached 5.00 and 2.00 μg/mL, respectively. Validation indicated the method was robust, quick, sensitive and adequate for DHAA analysis.     

Simultaneous detection of A and B trichothecenes by gas chromatography with flame ionization or mass selective detection

A clean-up cartridge consisting of ammonium sulfate, celite, alumina, charcoal and C18 was developed for the simultaneous detection of A and B type trichothecenes, namely 4,15-diacetoxy-scirpenol, T2-toxin, deoxynivalenol (DON) and nivalenol (NIV). After derivatization with N,N-dimethyl-trimethylsilyl-carbamate, the purified extracts were analyzed by gas chromatography with flame ionization (GC-FID) or mass selective detection (GC-MSD). Using this cartridge, no further sample clean-up steps are required that makes the developed method time and cost effective. The method is easy to implement; no special experience or instrumentation is required. The limits of detection in semolina and corn grits ranged from 0.30 to 0.47 mg kg⁻¹ for GC-FID and from 0.05 to 0.35 mg kg⁻¹ for GC-MSD. Corn gluten feed (CGF) samples were analyzed as well, for 4,15-diacetoxy-scirpenol and T2 toxin, with a limit of detection of 0.23 and 0.14 mg kg⁻¹, respectively.     

High-precision analysis of ethanol in bioethanol by gas chromatography with flame ionization detector

This paper describes the establishment and validation of gas chromatography-flame ionization detector (GC-FID) method for the determination of ethanol amount fraction in bioethanol samples. A general view of the development and optimization of the method is presented. The main aim of this study is the calculation of validation parameters. Selectivity of the method was determined. Linearity (R ²?>?0.999) was obtained in the range from 9.0 to 3040???g of ethanol per sample (because the mass of the test sample used was around 200?mg, this corresponds to 45?C2200???g?g^?1). The method showed good recoveries (average 99.0?%), and the relative standard deviation for repeatability and intermediate precision was 4.5 and 5.5?%, respectively. The limit of detection (LOD) and limit of quantification (LOQ) were calculated as 10 and 30???g?g^?1, respectively. The uncertainty budget was finally done according to the ??Guide to the Expression of Uncertainty in Measurement?? (GUM), and the relative expanded uncertainty was 4.8?% at coverage of k?=?2.     

Application of thin-layer chromatography with flame ionization detection to the characterization of organic extracts from diesel exhaust particulates

Thin-layer chromatography with flame ionization detection has been applied to the analysis of organic extracts of diesel exhaust particulates. Non-volatile organics whose boiling points are higher than ca. 300 degrees C can be analyzed, with a detection limit of ca. 0.03 micrograms and a relative standard deviation of ca. 10%. The organic extracts are separated into aliphatics , aromatics and polars by the development procedure with n-hexane, and the polars can be separated further by using toluene as the solvent. Some examples of application are presented.     

Multivariate pattern recognition of petroleum-based accelerants by solid-phase microextraction gas chromatography with flame ionization detection

A novel method has been developed for the extraction, analysis and identification of petroleum-based fuels using solid-phase microextraction with analysis by GC-FID. Multivariate data analysis is employed to simplify these data allowing for more accurate classification. Principal component analysis (PCA) and soft independent modeling of class analogy (SIMCA) are explored for their effectiveness in establishing accelerant groupings based on the current and previous ASTM International guidelines. The SIMCA models developed for the previous and current ASTM system were 98.5% and 97.2% accurate in unknown sample class prediction. SPME in conjunction with multivariate data analysis is a new approach in accelerant sampling and classification.     

Separation and determination of polyether carboxylic antibiotics from Streptomyces hygroscopicus NRRL B 1865 by thin-layer chromatography with flame ionization detection

Thin-layer chromatography coupled with flame ionization detection was used to develop a method to separate and to determine simultaneously three polyether carboxylic ionophore antibiotics (abierixin, nigericin and grisorixin) produced by Streptomyces hygroscopicus NRRL B 1865. Various proportions of chloroform, methanol and formic acid (or acetic acid as a substitute for formic acid) were used in the developing solvent to determine changes in RF values of the antibiotics and to allow conditions for maximum resolution to be obtained. Development on Chromarods SII with chloroform-methanol-formic acid (97:4:0.6, v/v/v) gave satisfactory and reliable separations of the three polyether antibiotics. Under these conditions, the internal standard methyl desoxycholate was found to be suitable for their simultaneous determination in the lipid extracts of Streptomyces hygroscopicus NRRL B 1865.