Theoretical assignments of the electronic spectrum of acetylene

Non empirical calculations of energies and properties of some excited states of acetylene are presented. A frozen core approximation is used and excitations to , and MO's are taken into account. Both valence and Rydberg states are considered. Assignments of the UV and electron impact spectra are proposed and some questions are raised.     

The influence of vibronic interactions on the chiroptical spectra of dissymmetric pseudo tetragonal metal complexes

The influence of vibronic interactions on the chiroptical spectra associated with a threesome of nearly degenerate electronic excited states in a dissymmetric molecular system is examined on a formal theoretical model. The model considers two vibrational modes to be effective in promoting pseudo Jahn-Teller (PJT) type interactions between the three closely spaced electronic excited states. Formal expressions are developed for the rotatory strengths of individual vibronic levels derived from the coupled electronic states. Two mode (vibrational)-three state (electronic) vibronic Hamiltonians are constructed (basis set size, 63–108, depending upon interaction parameters used) and diagonalized for a large number of different parameter sets representative of various vibronic coupling strengths, electronic energy level spacings, oscillator (vibrational mode) frequencies, and electronic rotatory strengths. Diagonalization of these vibronic Hamiltonians yields vibronic wave functions and energies which are then used to calculate rotatory strength spectra for the model system. The calculated results demonstrate the profound influence which vibronic interactions of the PJT type may have on the sign patterns and intensity distributions within the rotatory strength spectrum associated with a set of nearly degenerate electronic states. The implication of these results for the interpretation of circular dichroism spectra of chiral transition metal complexes with pseudo tetragonal symmetry are discussed.     

DODC aggregation inβ-cyclodextrin followed by temperature-dependent visible absorption and CD spectroscopy and singular value decomposition

The concentration and temperature dependent dimerization of 1,1-diethyloxadicarbocyanine iodide (DODC) in aqueous solutions of -cyclodextrin (-CyD) is studied by UV/vis and circular dichroism (CD) spectroscopy. The spectroscopic data are analyzed by singular value decomposition and yield equilibrium constants in agreement with known values. Thermodynamic parameters are obtained and discussed. The almost constant dissymmetry factor of the induced CD over the whole experimental range is further evidence of a free monomer and complexed dimer of DODC.     

A High Sensitivity Fluorescent Chemo-sensory System Based on β-Cyclodextrin Dimer Modified with Dansyl Moieties

-Cyclodextrin dimer linked with ethylenediamine at the upper rim of the cyclodextrin has been synthesized and then modified with two dansyl moieties inthe presence of N,N'-dicyclohexylcarbodiimide. The sensing ability and bindingproperty of the title compound were investigated for steroids and terpenoids. Thefluorescence intensity of this dimer was decreased when a host–guest complex was formed. The value I/I⁰, where I⁰ and I are fluorescence intensitiesin the absence and presence of a guest and I is I⁰- I, was used as a parameter of sensitivity. This host exhibited a much higher sensitivity and selective molecular recognition ability for bile acids such as ursodeoxycholic acid andchenodeoxycholic acid and terpenoids such as (-)-borneol than the dansyl-modifiedcyclodextrins reported previously including -cyclodextrin dimer. The behaviors of the appended moieties of the host during the formation of host–guest complexes were studied using induced circular dichroism (ICD) and fluorescence spectra. The ICD intensityof this dimer was decreased on accommodation of a guest and this spectral pattern of the title dimer was opposite to that of bis dansyl-modified -cyclodextrin monomer. Theguest-induced variations in the fluorescence and ICD intensities suggest that this dimer formed a 1 : 1 host–guest complex and the appended moieties act as a hydrophobic cap.     

Exciton Coupling and Complexation Behaviour of β-Cyclodextrin Naphthoate

The host–guest complexation behaviour of-cyclodextrin 6-O-mono-2-naphthoate(1) and 6-[(N-2-naphthoyl-2-aminoethyl) amino]-6-deoxy--cyclodextrin (2) have been studied by the circular dichroism method. The exciton coupling band of 1 suggests that two naphthoyl moieties are partly included in one -CD cavity. Host 1 could form a dimer in a more polar solvent and the dimer could be dissociated in a less polar solvent or by adding a guest. Solvent-induced, concentrationinduced, and guest-induced circular dichroism variations were examined. No exciton coupling was observed for host 2.     

Inclusion of dynamic σ-π polarization in π-electronab initio calculations

Summary A method is presented, whereby dynamic - polarization, i.e. the correlation effect expressed by simultaneous (-*, -*) excitations, can be approximately included in a multi-reference configuration interaction (MRCI) or multi-configurational self-consistent field (MC-SCF) calculation, without need to explicitly correlate the sigma orbitals. The method, which we call the capacitance matrix method, is based on the use of conventional one-electron integrals, from which a polarization potential (SPP) contribution is computed and added to the one- and two-electron Hamiltonian. In the present form, the method requires one parameter for each type of atom, and one for each type of bond. These parameters were adjusted to reproduce the dynamic - polarization energy, computed by restricted multi-reference CI calculations, of a number of states of different hydrocarbons, and the agreement was within a few percent. Using the same parameters in CAS (Complete Active Space) SCF calculations of various states of benzene gives excitation energies, when SPP is included, which is comparable to those obtained by much more elaborate MRCI calculations.     

Reactions of aziridine,its dimer, 2,2-dimethyl-aziridine dimer,and β,β-bis-N-aziridinoethylamine with aromatic aldehydes and dialdehydes

The reactions of aziridine, its dimer, 2,2-dimethylaziridine dimer, and the novel compound ,-bis-N-aziridinoethylamine with aromatic aldehydes and dialdehydes have given novel compounds.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 2131–2137, September, 1992.     

Application of the virial theorem to the study of molecular electronic wave functions

With aid of the virial theorem formulated for the energy differences of two electronic states some theorems on the wave functions of diatomic molecules have been proven. It is shown how proper Rydberg states can be distinguished from other electronic states with a diffuse outer orbital by virtue of the virial theorem and that a singlet-triplet pair of excited states cannot have the same equilibrium geometry and identical orbitals simultaneously. Furthermore if the two states have the same dissociation limit a theorem on the differences of the kinetic and the potential energy can be derived which allows an understanding of the shape of the electronic wave functions. As an application the wave functions and the ordering of the lowest states of H ₂ ⁺ and H₂ have been discussed.This work is part of the project Nr. SR 2.159.74 of the Schweizerischer Nationalfonds.     

Electronic states of the [2 n ]cyclophanes

Low energy singlet and triplet states for a series of [2 _n ]cyclophanes are discussed in terms of the results of a simple model calculation. Experimental trends can be explained under the assumption of significant - interaction involving the saturated bridges. This interaction destabilizes low energy excimer states, in contrast to the usual red shift observed for alkylbenzenes. The observed near-constancy of the onset of the absorption spectra can be explained by near-cancelation of through-bond and through-space contributions.From 01.01.1984, Royal Danish School of Educational Studies, Department of Chemistry, DK-2400 Copenhagen NV, Denmark     

The crystal structure of the inclusion complex of cyclomaltoheptaose (β-cyclodextrin) with 3,5-dimethylbenzoic acid

The crystal of theCD-3,5-dimethylbenzoic acid inclusion complex is triclinicP1 witha=15.707(3),b=15.694(3),c=15.999(3) Å, =101.502(5),=101.557(5), =103.805(4)°,V=3624 ų, andZ=1. Two crystallographically independentCD molecules form a dimer by means of hydrogen bonds between secondary hydroxyl groups in which disordered guest molecules in six orientations are accommodated. In two of them the guest molecules are situated at the dimer interface, their carboxyl groups interacting with the carboxyl groups of two other guest orientations that are found on either side of the monomer cavity. In the two last orientations the guest molecules enter the monomer cavities in an opposite sense with the carboxyl groups protruding from the primary side and are stabilized by cyclodextrin hydroxyl groups. A dense water network is formed in the interdimer space consisted of 18.2 water molecules distributed over 24 sites. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82175 (61 pages).Dedicated to Professor József Szejtli.     

Preparation of microlatex dispersions using oil-in-water microemulsions

The preparation of microlatex dispersions from microemulsions of a monomer (styrene, methylmethacrylate or vinyl acetate) is described. A simple method for preparing the microemulsion has been devised. This consists of forming a water-in-oil (w/o) emulsion using a low (HLB) surfactant (nonylphenol with 5, 6 or 7 moles ethylene oxide) and then titrating with an aqueous solution of a high HLB surfactant (nonylphenol with 15 or 16 moles ethylene oxide). A small amount of anionic surfactant (sodium lauryl sulphate, sodium dodecyl benzene sulphonate or dioctyl sulphosuccinate) was also incorporated to enhance the stability of the w/o emulsion and facilitate the inversion to an o/w microemulsion. The droplet-size distribution of the resulting microemulsion was determined using photon-correlation spectroscopy.Three different methods of polymerising the microemulsion were used. These were thermally induced polymerisation using potassium persulphate, azobis-2-methyl propamidinium dichloride (AMP-water-soluble initiators) or azobisisobutyronitrile (AIBN, an oil-soluble initiator). All these initiators required heating to 60°C, i.e. above the stability temperature of the microemulsion. In this case, the microlatices produced were fairly large (37–100 nm diameter) and had a broad particle-size distribution. The second polymerisation procedure was chemically induced using a redox system of hydrogen peroxide and ascorbic acid. This produced microlatices with small sizes (18–24 nm diameter) having a narrow-size distribution. The microlatex size was roughly two to three times the size of the microemulsion droplets. This showed that collision between two or three microemulsion droplets resulted in their coalescence during the polymerisation process. The third method of polymerisation was based on UV irradiation in conjunction with K₂S₂O₈, AMP or AIBN initiators. In this case, the microlatex size was also small (30–63 nm) with a narrow particle-size distribution.Microlatex particles were also prepared using a mixture of monomers (styrene plus methylmethacrylate) or mixture of monomers and a macromonomer, namely methoxy (polyethylene glycol)methacrylate. The latter was used to produce hairy particles, i.e. with grafted polyethylene oxide (PEO) chains.The stability of the microlatices was determined by adding electrolytes (NaCl, CaCl₂, Na₂SO₄ or MgSO₄) to determine the critical flocculation concentration (CFC). The nonionic latices were very stable giving no flocculation up to 6 mol dm^–3 NaCl or CaCl₂ and a CFC of 0.6 mol dm^–3 for Na₂SO₄ or MgSO₄. Charged latices were less stable than the nonionic ones. The critical flocculation temperatures (CFT) of all latices were determined as a function of electrolyte concentration. With the nonionic latices, CFC was higher than the -temperature for polyethylene oxide at the given electrolyte concentration. This indicated enhanced steric stabilisation as a result of the dense packing of the chains and hence an elastic contribution to the steric interaction. This was not the case with the charged latex, which showed CFT values lower than the -temperature. The hairy latices [i.e. those containing methoxy polyethylene glycol (PEG) methacrylate] were also less stable towards electrolyte (CFT was much lower than -temperature), indicating a low density of PEO layers.     

Hydrogen bonding in ε-caprolactam dimer: a quantum-chemical study

The equilibrium geometries, vibrational frequencies, and IR band intensities were calculated for the monomer and hydrogen-bonded cyclic dimer of -caprolactam (1) by the density functional B3LYP/6-311++G(d,p) method and compared with the experimental data. The gas phase IR spectrum of monomer of 1 was first measured. The calculated hydrogen bonding enthalpy H/2 in the hydrogen-bonded dimer in the gas phase (–5.93 kcal/mol) is consistent with the published data. The computed scaled (scaling factor 0.97) vibrational frequencies of the monomer and dimer are in good agreement with the experimental data. The geometry of the -caprolactam monomer remains nearly unchanged in its dimer except for the N-H, C-O, and C-N bond lengths that respectively change from 1.012, 1.230, and 1.369 in the former to 1.029, 1.246, and 1.350 in the latter. The frequencies, eigenvectors, and IR intensities of the amide modes of the monomer and dimer differ dramatically. The calculated NH and CO frequency shifts due to hydrogen bonding are in good agreement with the experimental data, but theoretical intensification of the NH IR band is much greater than that observed experimentally (by nearly 69 times vs. 11 times, respectively). The calculated N...O intermolecular distance in the structure of -caprolactam dimer equals the experimental value (2.89 ). The influence of the basis set employed on the results of calculations is discussed.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1818–1825, September, 2004.     

Reaction mechanisms in peptide synthesis. Part 2. Tautomerism of the peptide bond

Summary We had concluded in previous work that ring opening of a 2-alkyl-5(4H)-oxazolone by water or ammonia leads to transient high-energy imidol intermediates which instantly tautomerize to the native amides. Using the MOPAC molecular orbital program, detailed geometric and energetic characteristics of the tautomerism of a peptide bond have been determined on the AM1 level. The results demonstrate that tautomerism of a peptide bond comprises a three-stage process involving three successive transition states and a bimolecular mechanism: (i) EZ peptide bond isomerization followed by dimerization, (ii) concerted double-hydrogen exchange leading to an -hydroxyimine (imidic acid) followed by splitting of the dimer, and (iii) ZE N-methylimine inversion. While pathway (iiiiii) is predicted as a feasible route terminating in the formation of a peptide bond, the inverse route (iiiiii) is excluded as a possible initial step in the generation of a 5(4H)-oxazolone intermediate.     

The role of intra- and intermolecular hydrogen bonds in the formation of β-cyclodextrin head-to-head and head-to-tail dimers. The results of ab initio and semiempirical quantum-chemical calculations

The conformation of a free -cyclodextrin molecule optimized by the MNDO/PM3 quantum-chemical calculations has C₇ symmetry. The right orientation of the interglucose hydrogen bonds in -cyclodextrin, in which the 2-OH groups act as the proton donors and the O atoms of the nearby 3"-OH groups function as the proton acceptors, is advantageous for thermodynamic reasons. The ring of seven H bonds thus formed stabilizes the symmetrical form of -cyclodextrin. The -cyclodextrin head-to-head dimer has D ₇ symmetry and consists of molecules whose 2-OH groups partcipate as proton donors in the formation of fourteen complementary intermolecular hydrogen bonds. The energy of H bonds in the -cyclodextrin monomer and dimer was estimated to be 1.0--1.4 kcal mol^–1. Of the two possible -cyclodextrin dimers, the head-to-tail dimer is more thermodynamically stable. The thermodynamic preference of the right orientation of the inter-glucose H bonds in -cyclodextrin was confirmed by the MP2/6-31G(d,p)//6-31G(d,p) ab initio calculations for maltose (-glucodioside). The maltose molecule with inter-glucose H bonds of the type 2-OHO(3")-H is more stable than the structure with the H-(2)OH-O(3") orientation of H bonds with a difference of 2.7 kcal mol^–1. According to the MNDO/PM3 method, the maltose structure with the right H bond orientation is more stable by 3.1 kcal mol^–1.     

Synthesis and Photochemical Properties of Luminescent Eu(III) Complexes with Macrocyclic and Macropolycyclic Ligands Incorporating 3,3′-Biisoquinoline-2,2-dioxide Units

Three novel ligands incorporating two, or three 3,3-biisoquinoline-2,2-dioxide units have been synthesized using modified standard methods of cyclization. These ligands formed photoactive mononuclear complexes with a Eu(III) cation. The ligand with two photoactive units displayed a better quantum yield for the Eu(III) emission (0.064) upon UV excitation than the other two complexes incorporating three units, whose luminescence quantum yields have been estimated to be below 0.01. The luminescence of the Eu(III) complex with two sensitizing units was not stable in aqueous solution, whereas with the two other complexes, their luminescence in solution remained for a couple of days.     

Calculation of some electronic excited states of formaldehyde

The optimized MO's of several excited states of formaldehyde have been calculated by means of a large basis set of modified Gaussian functions; particular attention has been paid to the * transition. The total energy of the various states has been obtained as the sum of the SCF and correlation energies; the last one has been calculated as a functional of the electronic density. The calculated values for the transition energies are in good agreement with the experiment. A strong interaction of the * state with the continuum is evidentiated; this fact can justify the absence of the * band in the absorption spectrum.     

An EELS and EXELFS study of amorphous hydrogenated silicon carbide

A series of thin films of amorphous hydrogenated silicon carbide (a-SiCH) produced by RF plasma decomposition of propane and silane has been studied by electron energy-loss spectroscopy (EELS) and extended energy-loss fine structure (EXELFS) studies. The composition of the films has been determined by EELS and the nearest neighbour spacings have been determined by EXELFS. These results, along with the energy of the plasmon loss peaks, have been compared with the deposition conditions for each film. The results show that for a large gas ratio (C₃H₈/(C₃H₈+SiH₄)) the films have a high proportion of carbon and are similar to a-CH in structure, whereas those films prepared with Y = 0.4 or 0.5 have nearest neighbour spacings consistent with those for tetrahedrally bonded carbon. The films prepared with lowest Y have nearest neighbour spacings similar to those for amorphous silicon carbide. The results for a-SiCH have been compared with the results of EELS and EXELFS of CVD diamond films, amorphous carbon and amorphous silicon.     

Study of the Supramolecular Inclusion of β-Cyclodextrin with Andrographolide

An inclusion complex of -cyclodextrin with andrographolide (Andro) was prepared by using a convenient new method of microwave irradiation. The structure of the inclusion complex was determined by UV and IR analyses as well as ¹H NMR, ¹³C NMR and two dimensional NOE spectroscopic measurements. The results indicated that the possible stoichiometry of complex formation is 1:1 (guest:host ratio) and the two isomeric 1:1 inclusion complexes are present simultaneously in solution. Thermal studies proved the thermal stability of the inclusion complex.     

Photo-responsive behavior of a monolayer composed of an azobenzene containing polypeptide in the main chain

A photoresponsive polypeptide, two -helical poly(-methyl L-glutamate)s joined with an azobenzene (MAzoM,Mn=11000), have been prepared. Monolayers of the polypeptide were formed at air-water interface and the photoresponsive behavior of the monolayer obtained was investigated. A trans to cis photo-isomerization of the azobenzene moiety in the main chain of MAzoM induced by UV light irradiation resulted in a bending structure formation in the main chain of the polypeptide via photo-induced changes in the geometry of the azobenzene chromophore. As a result, the limiting area per molecule of the MAzoM monolayer was decreased. Based on the degree of the decrease in the limiting area per molecule, it was estimated that the bending angle between the two -helical rods of MAzoM molecule under UV light irradiation was ca. 140°. The photo-responsive behavior of the MAzoM monolayer was reversible and consisted along with the photo-isomerization of azobenzene moiety.     

Inclusion of the Antidepressant Paroxetine in β-cyclodextrin

The X-ray structure and thermal stability of a -cyclodextrin inclusion complex of the antidepressant paroxetine [(3S-trans)-3-[(1,3-benzodioxol-5-yloxy)methyl]-4-(4-fluorophenyl)piperidine], with the formula ( -cyclodextrin)₂...paroxetine...28H₂O, are reported. On heating, the crystals dehydrate in two stages and begin to decompose from approximately 270 °C. An X-ray diffraction study at 173K showed that the complex crystallizes in the monoclinic system, space group P2₁ with a = 15.2262(3), b = 31.4771(1), c = 15.6739(1) Å, = 104.320(1)° and Z = 2 formula units. Refinement on F² converged at R1 = 0.066, wR₂ = 0.182 (21478 reflections). On encapsulation within a head-to-head -cyclodextrin dimer, the paroxetine molecule adopts an unusual `hairpin' conformation, stabilised by intramolecular ... interaction between the phenyl rings. The guest piperidine ring is located at the primary face of one host molecule of the dimer while the fluorophenyl and benzodioxole moieties respectively occupy the dimer interfacial region and the cavity of the second host molecule. Experimental and computed X-ray powder diffraction patterns for the complex are also reported. The mode of stacking of the dimeric complex units is shown to be one of at least three distinct variants which can be identified for -cyclodextrin complexes with similar unit cell dimensions and crystallizing in the same space group.