The structure of feterin — A new terpenoid coumarin fromFerula teterrima

Summary From the roots ofFerula teterrima Kar. et Kir. a new terpenoid coumarin — feterin — has been isolated with the formula C₂₆H₃₂O₆, mp 155–158°C, [] _D ^2° -52.02° (chloroform), M⁺ 440, the structure and relative configuration of which have been established with the aid of the INDOR method and on the basis of a study of the PMR spectra in the presence of the paramagnetic shift reagent Eu(DMP)₃.All-Union Scientific-Research Institute of Medicinal Plants, Moscow. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 318–322, May–June, 1978.     

13C NMR spectra and structure of bungeidiol and its transformation products

The results are given of a study of the¹³C NMR spectra of the new terpenoid coumarin bungeidiol (I) and of the products of its transformation (II) and (III) and some model compounds (IV–VII). On the basis of the results obtained from these¹³C NMR spectra and with the use of additive contributions depending on the nature and positions of various substituents (hydroxy and methoxy groups) in the aromatic ring, the structure (I) has been confirmed and a complete assignment of the signals of all the carbon atoms both in the coumarin ring and in the aliphatic part of the molecule of (I) has been made.Institute of Toxicology, Ministry of Health of the USSR, Leningrad. Translated from Khimiya Prirodynkh Soedinenii, No. 3, pp. 294–301, May–June, 1982.     

Composition and Antimicrobial Activity of <Emphasis Type="Italic">Helichrysum italicum</Emphasis> Essential Oil and Its Terpene and Terpenoid Fractions

The essential oil of Helichrysum italicum (Roth) G. Don from Croatia has been fractionated into terpene and terpenoid fractions and analyzed using GC/MS. Fifty-two compounds were identified. The main hydrocarbons of the oil were α-pinene (10.2%), α-cedrene (9.6%) aromadendrene (4.4%), β-caryophyllene (4.2%), and limonene (3.8%), while the main oxygen-containing compounds were neryl acetate (11.5%), 2-methylcyclohexyl pentanoate (8.3%), 2-methylcyclohexyl octanoate (4.8%), and geranyl acetate (4.7%). The essential oil and its terpene and terpenoid fractions were evaluated for antibacterial and antifungal activities. The screening of antimicrobial activity was conducted by a disc diffusion test and the minimum inhibitory concentration was determined against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans. The essential oil and its terpenoid fraction exhibited higher antimicrobial activity with respect to the terpene fraction. The antimicrobial activities of the oil and its terpenoid fraction were more pronounced against Staphylococcus aureus and Candida albicans.__________Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 29–32, January–February, 2005.     

Far-infrared spectrum,barrier to internal rotation,ro structure,and ab initio calculations for acetylacetylene

The far-infrared spectrum has been recorded from 50 to 360 cm^–1 at a resolution of 0.10 cm^–1 for acetyiacetylene (1-butyne-3-one], CH₃C(O)CCH. The fundamental methyl torsion has been observed at 117.94 cm^–1, from which a periodic barrier to internal rotation has been calculated to be 346 cm^–1 (989 cal mol^–1]. Infrared spectra (3500-50 cm^–1] of the gas and solid and the Raman spectra (3500-100 cm^–1) of the gas, liquid, and solid are reported. Utilizing previously reported rotational constants for three isotopic species,r _o structural parameters have been determined for the heavy-atom skeleton. The fundamental vibrational frequencies, barrier to internal rotation, and structural parameters that have been obtained experimentally are compared to those obtained from ab initio Hartree-Fock calculations employing 3-21G, 6-31G, and DZ basis sets and to the corresponding quantities for some similar molecules.     

Investigation of 2-[(<Emphasis Type="Italic">E</Emphasis>)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium as a new highly sensitive reagent for the spectrophotometric determination of nitrophenols

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of nitrophenols [picric acid (PA); dinitrophenols (DNP)] in wastewater samples. The method is based on the reaction of nitrophenols with 2-[(E)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3 H-indolium chloride reagent to form the colored ion associates, which are extracted by organic solvents. The molar absorptivity of the ion associates of PA with the investigated reagent ranges from 8.3×10⁴ to 11.3×10⁴ L mol^–1 cm^–1, depending on the extractant. Because only PA is extracted in an acidic medium with the investigated reagent, but both PA and DNP are extracted in an alkaline medium, it is possible to determine both substances in a mixture. Appropriate reaction conditions have been established. The absorbance of the colored extracts obeys Beers law in the range of 0.04–4.58 mg L^–1 PA, 1.0–18.4 mg L^–1 2,4-DNP and 1.2–14.7 mg L^–1 2,6-DNP, respectively. The limit of detections, calculated from a blank test (n=10; P=0.95), are 0.05 mg L^–1 PA, 0.9 mg L^–1 (2,4-DNP), and 1.1 mg L^–1 (2,6-DNP), respectively.     

Structure of a new phenol aldehyde from the leaves of Eucalyptus viminalis

A new terpenoid phenol aldehyde has been isolated from an alcoholic extract of the leaves of the ribbon eucalyptus by column chromatography on silica gel, and on the basis of the results of¹H and¹³C NMR spectroscopy and mass spectrometry the structure of 4-[1-(3,5-diformyl-2,4,6-trihydroxyphenyl)-3-methylbutyl]-ledol is proposed for it. The relative configurations of the substituents in the terpenoid moiety of the molecule have been determined. All-Union Scientific-Research Institute of Medicinal Plants and Production Association, Moscow. Translated from Khimiya Prirodnykh Soedinenii, No. 6, pp. 789–795, November–December, 1991.     

Buffer Standards for the Physiological pH of Zwitterionic Compounds,MOBS and TABS from 5 to 55°C

The values of the second dissociation constant, pK₂, and related thermodynamic quantities of 4-(N-morpholino)butanesulfonic acid (MOBS) and N-tris(hydroxymethyl)-4-aminobutanesulfonic acid (TABS) have already been reported over the temperature range 5–55°C including 37{°}C. This paper reports the pH values of twelve equimolal buffer solutions at designated pH (s) with the following compositions: (a) mixtures of MOBS (0.05 mol-kg^–1) + NaMOBS (0.05 mol-kg^–1); (b) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1); (c) MOBS (0.08 mol-kg^–1) + NaMOBS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1); (d) TABS (0.05 mol-kg^–1) + NaTABS (0.05 mol-kg^–1); and (e) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1); and (f) TABS (0.08 mol-kg^–1) + NaTABS (0.08 mol-kg^–1) + NaCl (0.08 mol-kg^–1). Two buffer solutions have ionic strengths I= 0.05 mol-kg^–1, another two have I=0.08 mol-kg^–1, and the remaining two buffer solutions have I= 0.16 mol-kg^–1, which is close to that of the clinical fluids (blood serum). These buffers have been recommended as a useful pH standard for the measurements of physiological solutions. Conventional pH values of all six buffer solutions from 5–55°C, as well as those obtained from the liquid junction potential correction at 25 and 37{°}C have been calculated. The flowing-junction calomel cell has been utilized to measure E_j, the liquid junction potential.     

Spectrophotometric determination of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3- H-indol-2-ylidene)propenyl]-3 H-indolium

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of manganese in sewage. The method is based on the reaction of manganese with derivatives of 1,3,3-trimethyl-2-[3-(1,3,3-trimethyl-1,3-H-indol-2-ylidene)propenyl]-3H-indolium to form a colored ion associate with a sensitive absorption maximum at 560 nm. The appropriate reaction conditions have been established: pH 8.5–10.0, 1.25–2.3×10^–3 mol L^–1 1-nitroso-2-naphthol, and 1.6–2.4×10^–4 mol L^–1 dye reagent. Beer's law is obeyed for manganese concentrations up to 4.2 mg L^–1. The limit of detection is 0.01 mg L^–1 Mn²⁺; the molar absorptivity of the ion associate was 7.5×10⁴ L mol^–1 cm^–1. The effect of various foreign ions was examined. A reaction mechanism is suggested. The developed procedure was tested for determination of manganese in sewage with satisfactory precision and accuracy.     

Infrared and raman spectra,vibrational assignments,normal coordinate analysis,and ab initio calculations of methyltrifluoromethyldisulfide and bis(trifluoromethyl)disulfide

The infrared and Raman (3500-35 cm^–1) spectra of gaseous and solid methyltrifluoromethyldisulfide, CF₃SSCH₃, and bis(trifluoromethyl)disulfide, CF₃SSCF₃, have been recorded. Additionally, the Raman spectra of the neat liquids have been obtained and qualitative depolarization values have been measured. These vibrational data have been interpreted, for both molecules, on the basis that the C-S-S-C dihedral angle is approximately 90°. Vibrational assignments are given for both molecules and are supported by normal coordinate calculations utilizing ab initio Hartree-Fock gradient calculations with the 3-21G^* basis set to obtain the frequencies for the normal modes and potential energy distributions. The CH₃ and CF₃ torsional modes have been observed at 140 and 48 cm^–1, respectively, for CF₃SSCH₃, from which periodic barriers of 485 cm^–1 (1.39 kcal mol^–1) and 853 cm^–1 (2.44 kcal mol^–1), respectively, have been calculated. Complete equilibrium geometries have been determined for both molecules by ab initio calculations employing both 3–21G and 6–31G basis sets. The structural parameters for bis(trifluoromethyl)disulfide are compared to those suggested from electron diffraction studies. The results are compared to corresponding quantities obtained for some similar molecules.Taken in part from the thesis of M. M. Bergana which will be submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree.     

Spectra and structure of small ring compounds. LIX

The Raman (3200 to 10 cm^–1) and far infrared (380 to 60 cm^–1) spectra of gaseous fluorocyclobutane,c-C₄H₇F, have been recorded. A series of Q-branches observed in both of these spectra beginning at 166 cm^–1 with successive transitions falling to lower frequencies have been assigned to the ring puckering vibrations of both the low energy equatorial and high energy axial conformers. These data have been fit to an asymmetric potential function of the form:V (cm^–1)=(1.76±0.05)10³X+(4.88±0.28)10⁴X²+(2.12 ±0.16)10³ exp(–5.66±0.41)10X² with a reduced mass function ofg ₄₄= 0.00386–0.00295X+0.03485X²+0.1228X³ +0.3459X⁴, whereX is the ring puckering coordinate. Utilizing this potential, the difference between the puckering angles for the two conformers was calculated to be 4° with the equatorial conformer having the larger value of 28°. This potential function is consistent with an energy difference between the equatorial and axial forms of 447 cm^–1 (1.28 kcal/mol) and a barrier to ring inversion from the equatorial to the axial conformation of 713 cm^–1 (2.04 kcal/mol). Experimental values for the enthalpy difference between the two conformers have been determined for both the liquid (400±30 c^–1) and gas (413±43 cm^–1) from investigations of the Raman spectra at variable temperatures. The conformational stability, enthalpy difference, structural parameters, and fundamental vibrational frequencies, which have been determined experimentally, are compared to those obtained from ab initio Hartree-Fock calculations employing the 3-21G, 6-31 G^*, and 6-31 G^** basis sets.For part LVIII, seeStruct. Chem. 1991,2, 195.Taken in part from the thesis of M. J. Lee, which has been submitted to the Department of Chemistry in partial fulfillment of the Ph.D. degree, May 1991.     

Study of a hollow cathode arc discharge in the presence of chromium oxide

A hollow cathode arc discharge in hydrogen has been used for the purpose of chromium oxide reduction, the solid oxide being placed inside the anode. Mass transport from the oxide to the gas phase and excitation conditions in the plasma have been investigated. The results show that a substantial amount of oxide is transferred to the gas phase with subsequent reduction and deposition inside the cathode cavity, in the form of a pure metal. The residual part condenses on the discharge chamber wall as an amorphous substance, containing 50–60% of Cr metal, and on the anode surface under the form of a mixture of chromium oxide and metal crystals (10%). From spectroscopic investigations it follows that, inside the anode zone, total Cr concentration in the gas phase is of the order of 10¹⁴ cm^–3, the excitation temperature of the atoms and ions being 4500 and 5500 K, respectively, and the ionization temperature being about 6000 K.Notation I absolute spectral line intensity (W cm^–2 sr^–1) - emission coefficient (W cm^–3 sr^–1) - A relative absorption - absorption coefficient (cm^–1) - L plasma diameter (mm) - f _tk oscillator strength - _D full Doppler width (cm^–1) - S( ₀ L) Ladenburg-Levy function - wave number (cm^–1) - k _pl mass transport rate (mol cm^–2 s^–1) - k _th thermal reduction rate (mol cm^–2 s^–1) - u ion mobility (mm V^–1 s^–1 ) - E electric field strength (V mm^–1) - drift velocity (cm s^–1)     

Kinetics of the Dissolution of Silver in Thiocarbamide Solutions

The dependence of the rate of solution of silver on the pH of the solution, the ratio of the iron(III) and thiocarbamide concentrations, and the temperature has been determined. The rate constants for the solution of silver (k _i = 2.3·10^–4 to 9.6·10^–4s^–1) at temperatures from 283-298 K have been calculated and from the temperature dependence of the rate constant the activation energies have been calculated: 68.84 kJ/mol for kinetic control of the rate of solution and 26.06 kJ/mol in the adsorption inhibition region.     

Spectra and Structure of Silicon-Containing Compounds. XXVIII1 Infrared and Raman Spectra,Vibrational Assignment,and Ab Initio Calculations of Vibrational Spectrum and Structural Parameters of Vinyltrichlorosilane

The infrared spectra (3200-50 cm^–1) of gaseous and solid vinyltrichlorosilane, CH₂=CH-SiCl₃, have been recorded. In addition, the Raman spectrum (3200-10 cm^–1) of the liquid has been recorded and quantitative depolarization values obtained. The infrared spectrum of the sample dissolved in liquid xenon (–80°C) has also been recorded. Using the experimental data and normal coordinate calculations with scaled ab initio force constants, the complete vibrational assignment is proposed. The torsional mode was observed in the infrared spectrum of the gas at 69 cm^–1 and the threefold barrier of internal rotation was calculated to be 500 cm^–1 (5.98 kJ/mol). Ab initio calculations have been carried out at the restricted Hartree–Fock level of the theory as well as with full electron correlation by the perturbation method to second order with different basis sets up to 6-311+G(d,p) to obtain the optimized geometries, harmonic force constants, infrared intensities, Raman activities, depolarization ratios, and vibrational frequencies. The ab initio predicted structural parameters are compared with those obtained from a previous electron diffraction study.     

Infrared and Raman Spectra,Conformational Stability,Ab Initio Calculations,and Vibrational Assignments for Cyclopropyldifluorosilane

The infrared (3200–30 cm^–1) spectra of gaseous and solid Cyclopropyldifluorosilane, c-C₃H₅SiF₂H, and the Raman spectra (3200–20 cm^–1) of the liquid with quantitative depolarization values and the solid have been recorded. Both the syn (cis) and skew (gauche) conformers have been identified in the fluid phases, but only the syn conformer remains in the solid. Variable temperature (–55 to –100°C) studies of the infrared spectra of the sample dissolved in liquid xenon have been carried out. From these data, the enthalpy difference has been determined to be 73 ± 10 cm^–1 (209 ± 29 cal mol^–1), with the syn conformer being the more stable rotamer, which is at variance with the predictions from ab initio calculations. A complete vibrational assignment is proposed for both conformers based on infared band contours, relative intensities, depolarization values, and group frequencies. The vibrational assignments are supported by normal coordinate calculations utilizing the force constants from ab initio MP2/6-31G* calculations. Utilizing the frequencies of the silicon–hydrogen sketch, the rm Si—H bond distances of 1.474 and 1.472 Å have been obtained for the syn and skew conformers, respectively. Complete equilibrium geometries have been determined for both rotamers by ab initio calculations employing the 6-31G* and 6-311 +G** basis sets at levels of restricted Hartree-Fock (RHF) and/or Moller–Plesset (MP) to second order. The potential energy terms for the conformer interconversion have been obtained from the MP2/6-31G* calculation. The results are discussed and compared to those obtained for some similar molecules.     

1, 2-Dithiolium salts

A new method for the synthesis of 1, 2-dithiolium hydrogen sulfates by the oxidation of 1, 2-dithiole-3-thiones with hydrogen peroxide in acetic acid has been developed. From 4-(p-tolyl) 1, 2-dithiolium hydrogen sulfate a series of salts containing anions of inorganic, heteroorganic, and organic acids (Cl^–, Br^–, I^–, ClO ₄ ^– , CNS^–, VO ₃ ^– , HMoOO ₄ ^– , S₂O ₃ ^2– , S₂O ₈ ^2– , Cr₂O ₇ ^2– , Fe(CN) ₆ ^3– , Fe(CN) ₆ ^4– , B(C₆H₅) ₄ ^– , F₃CCOO^–, C₆H₂(NO₂)₃O^–) has been obtained. 4-(p-tolyl)-1, 2-dithiolium salts containing the anions NO ₂ ^– , NO ₃ ^– , ClO ₃ ^– , BrO ₃ ^– , SO ₃ ^2– , SO ₄ ^2– , S₂O ₅ ^2– and Cl₃CCOO^– dissolve in water and do not precipitate in double decomposition reactions. The reactions of 4-(p-tolyl)-1, 2-dithiolium hydrogen sulfate with sodium sulfite, disulfide, and hydrogen sulfide lead to the formation of bis[4-(p-tolyl)-1, 2-dithiol-3-yl] sulfide and disulfide and the sodium salt of 4-(p-tolyl-1, 2-dithiole-3-thiol, respectively. The reaction of 4-(p-tolyl)-1, 2-dithiolium hydrogen sulfate with solutions of salts of the alkali metals containing the anions of weak acids F^–, CNO^–, HCO ₃ ^– , CO ₃ ^2– , B₄O ₇ ^2– , HAsO ₄ ^2– , PO ₄ ^3– , CH₃COO^–, ClCH₂COO^–, etc.) forms bis[4-(p-tolyl)-1, 2-dithlol-3-yl] oxide. [8, Table 3].For part I, see [1].     

Marked variations of proton release energy of the G–M (M = Li, Na) in the water circumstance

The variations of N1–H proton release energy of G–M (M = Li, Na) cation have been investigated employing density functional theory using B3LYP/6-31++G^**//B3LYP/6-31+G^* method. There are three modes (NO mode, N mode and O mode) when the hydrated-M⁺ bonds to guanine. The bonding energy of the hydrated M⁺ to the guanine reduces following the increase in the number of water molecules. The proton release energies of the G–M⁺ complexes are calculated at the condition of the different numbers of water molecules and the different modes of water molecules bonded on the G–M⁺. The results show that the difference of proton release energy on three modes is very small, and the proton release energies of the Na⁺ complexes are slightly larger than those of the Li⁺ complexes. The effect on the N1–H proton release is very small when the water molecules bond on the M⁺ cation, but the effect is very large when the water molecule bonds on the N1–H proton and the proton releases as the hydrated proton. The IR vibrational frequencies of the hydrated G–M⁺ complexes are calculated using analytic second derivative methods at the B3LYP/6-31+G^* level. The vibrational frequency analyses show that the changes of the vibrational frequency are consistent with the changes of geometry and the changes of the N1–H proton release energy. The N1–H proton release (N1–H proton release energy: 45–60 kcal/mol) of the guanine occurs easily under the biological environment.     

Electronic absorption spectra,ESR spectra,and structure of coordination polyhedrons of titanium(III) in molten and “instantly cooled” systems of sodium phosphates and halides

The structure of Ti(III) coordination polyhedrons in both individual NaPO₃ and 70 mole % NaPO₃-30 mole % Na_nX mixtures (X=PO₃ ^3–, P₂O₇ ^4–, F^–, Cl^–) in the molten and solid states has been investigated on the basis of data from electronic absorption and ESR spectra. The formation of tetragonally distorted Ti(III) coordination polyhedrons with D_4h symmetry coordinated only by (PO₃ ^–)_n chains with the following values of the spectroscopic parameters for the molten (and solid) states has been established in all the phosphate systems investigated: 10Dq=17,300 (18,000) cm^–1 (Ds=50 cm^–1, Dt=5600, g=1.959, g₁=1.930, =93. cm^–1). It has been shown that the greater is the extent of depolymerization of the phosphate chains in the melt, the stronger is the Ti(III) coordination polyhedron formed; the following relative series of the depolymerizing strength of the anions has accordingly been established: PO₄ ^3–2O₇ ^4–––.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 5, pp. 610–614, September–October, 1989.     

Radiochemical determination of antimony

A radioanalytical method based on substoichiometric principles has been developed for the extraction and determination of antimony/III/ with 1-/2-pyridylazo/-2-naphthol /PAN/. Antimony/III/ forms a red complex with PAN in the presence of I^– or Br^–, which is extractable into benzene from sulphuric acid media.     

Asymmetric synthesis,stereochemistry, and absolute configuration of 1,2-5-trimethyl-5-(2-cyanoethyl)- and 1,2,5-trimethyl-4-piperidinones

The asymmetric Michael alkylation of (–)-1,2,5-trimethyl-4-(1S-phenylethylimino)piperidine by electrondeficient alkenes proceeds with the formation of(+)-cis-(2S,5S)- and (–)-trans-(2R,5S) diastereomers of 1,2,5-trimethyl-5-(2-cyanoethyl)- and 1,2,5-trimethyl-5-(2-methoxycarbonylethyl)-4-piperidinones containing a chiral quaternary center C(₅). The spatial structure of these new chiral 4-piperidinones has been established on the basis of ¹H and ¹³C NMR spectroscopic data. The absolute configuration of the C(₂) and c(₅) chiral centers in the diastereomers has been determined by stereochemical correlation on the basis of circular dichroism data.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1369–1378, October, 1992.     

Cyclodextrin Complexation of the Stilbene 4-(2-(4-Tert-butylphenyl)ethen-1-yl)- benzoate and the Self-assembly of Molecular Devices

E-4-(2-(4- tert - butylphenyl) ethen-1- yl)benzoate, E-1^–, photoisomerizes to the Z-1^– isomer and vice versa in the free state and in the binary complexes 2·E-1^–, 2·Z-1^–, 3·E-1^– and 3·Z-1^– where 2 is the urea-linked cyclodextrin N-(6 ^A -deoxy--cyclodextrin-6 ^A - yl)-N-(6 ^A -deoxy--cyclodextrin-6 ^A - yl)urea and 3 is N,N- bis(6 ^A -deoxy--cyclodextrin-6 ^A - yl)urea. In 2·E-1^–and 3·E-1^– the stilbene occupies both cyclodextrin (CD) components of 2 and 3, whereas in 2·Z-1^– and 3·Z-1^– it only occupies one CD component while the other CD component is unoccupied. 4- tert - Butylphenolate, 4^–, and its carboxylate, 5^–, and sulfonate, 6^–, analogues form the ternary complex 2·Z-1^–·4^– and its analogues and also 3·Z-1^–·4^– and its analogues. These photoisomerize to 2·E-1^–and 3·E-1^– and either free 4^–, 57^– or 6^– and thereby function as molecular devices.