Adducts of phenoxathiin and thianthrene cation radicals with alkenes and cycloalkenes

Phenoxathiin cation radical perchlorate (PO.+ClO4(-)) added stereospecifically to cyclopentene, cyclohexene, cycloheptene, and 1,5-cyclooctadiene to give 1,2-bis(5-phenoxathiiniumyl)cycloalkane diperchlorates (4-7) in good yield. The diaxial configuration of the PO+ groups was confirmed with X-ray crystallography. Unlike additions of thianthrene cation radical perchlorate (Th.+ClO4(-)) to these cycloalkenes, no evidence for formation of monoadducts was found in the reactions of PO.+ClO4(-). This difference is discussed. Addition of Th.+ClO4(-) to five trans alkenes (2-butene, 2-pentene, 4-methyl-2-pentene, 3-octene, 5-decene) and four cis alkenes (2-pentene, 2-hexene, 2-heptene, 5-decene) gave in each case a mixture of mono- and bisadducts in which the configuration of the alkene was retained. Thus, cis alkenes gave erythro monoadducts and threo bisadducts, whereas trans alkenes gave threo monoadducts and erythro bisadducts. In these additions to alkenes, cis alkenes gave predominantly bisadducts, while trans alkenes (except for trans-2-butene) gave predominantly monoadducts. This difference is explained. 1,2-Bis(5-phenoxathiiniumyl)cycloalkanes (4-7) and 1,2-bis(5-thianthreniumyl)cycloalkanes underwent fast elimination reactions on activated alumina forming, respectively, 1-(5-phenoxathiiniumyl)cycloalkenes (8-11) and 1-(5-thianthreniumyl)cycloalkenes (12-16). Among adducts of Th.+ClO4(-) and alkenes, monoadducts underwent fast ring opening on alumina to give (5-thianthreniumyl)alkenes, while bisadducts underwent fast eliminations of H+ and thianthrene (Th) to give (5-thianthreniumyl)alkenes also. Ring opening of monoadducts was a stereospecific reaction in which the configuration of the original alkene was retained. Thus, erythro monoadducts (from cis alkenes) gave (E)-(5-thianthreniumyl)alkenes and threo monoadducts (from trans alkenes) gave (Z)-(5-thianthreniumyl)alkenes. Among bisadducts, elimination of a proton and Th occurred and was more complex, giving both (E)- and (Z)-(5-thianthreniumyl)alkenes. These results are explained. Configurations of adducts and (5-thianthreniumyl)alkenes were deduced with the aid of X-ray crystallography and (1)H and (13)C NMR spectroscopy. In the NMR spectra of (E)- and (Z)-(5-thianthreniumyl)alkenes, the alkenyl proton of Z isomers always appeared at a lower field (0.8-1.0 ppm) than that of E isomers.     

Addition of the phenoxathiin cation radical to alkenes and nonconjugated dienes. Formation of (E)- and (Z)-(10-phenoxathiiniumyl)alkenes and (E)- and (Z)-(10-phenoxathiiniumyl)dienes on basic alumina

Addition of phenoxathiin cation radical (PO*+) to acyclic alkenes in acetonitrile (MeCN) solution occurred stereospecifically to form bis(10-phenoxathiiniumyl)alkane adducts. Stereospecific trans addition is ascribed to the intermediacy of an episulfonium cation radical. The alkenes used were cis- and trans-2-butene, cis- and trans-2-pentene, cis- and trans-4-methyl-2-pentene, cis- and trans-4-octene, trans-3-hexene, trans-3-octene, trans-5-decene, cis-2-hexene, and cis-2-heptene. The erythro bisadducts (compounds 6) were obtained with trans-alkenes, while threo bisadducts (compounds 7) were obtained with cis-alkenes. The assigned structures of 6 and 7 were consistent with their NMR spectra and, in one case, 6c (the adduct of trans-4-methyl-2-pentene) was confirmed with X-ray crystallography. Additions of PO*+ to 1,4-hexa-, 1,5-hexa-, 1,6-hepta-, and 1,7-octadiene gave bis(10-phenoxathiiniumyl)alkenes (compounds 8), the assigned structures of which were consistent with their NMR spectra. Each of these adducts lost a proton and phenoxathiin (PO) when treated with basic alumina in MeCN solution. Compounds 6 (from trans-alkenes) gave mixtures of (Z)- (9) and (E)-(10-phenoxathiiniumyl)alkenes (10) in which the (Z)-isomers (9) were dominant. On the other hand, compounds 7 (from cis-alkenes) gave mixtures of 9 and 10 in which, with one exception (the adduct 7c of cis-4-methyl-2-pentene), compounds 10 were dominant. The path to elimination is discussed. The alkenes 9 and 10 were characterized with NMR spectroscopy and, in one case (9a), with X-ray crystallography. Reactions of 8b-d with basic alumina gave mixtures of (E)- (13) and (Z)-(10-phenoxathiiniumyl)dienes (14), in which compounds 13 were dominant. The configuration of the product from 8a (the adduct of 1,4-hexadiene) could not be settled. Noteworthy features in the coupling patterns and chemical shifts in the NMR spectra of some of the adducts and their products are discussed and related to adduct conformations.     

Adducts of thianthrene- and phenoxathiin cation radical salts with symmetrical alkynes. Structure and formation of cumulenes on alumina leading to alpha-diketones, alpha-hydroxyalkynes, and alpha-acetamidoalkynes

[reaction: see text] Thianthrene cation radical tetrafluoroborate (Th*+ BF4-) added to 2-butyne, 3-hexyne, 4-octyne, and 5-decyne in MeCN to form trans bisadducts R(Th+)C=C(Th+)R, where R = Me, Et, Pr, Bu (7a-d). Phenoxathiin cation radical tetrafluoroborate (PO*+ BF4-) added similarly to the last three alkynes to form adducts R(PO+)C=C(PO+)R, 8b-d. Cyclic monoadducts were not found. The trans structures of 7 and 8 were deduced with X-ray crystallography (7c) and NMR spectroscopy. When solutions of adducts in CHCl3 and MeCN were deposited on activated alumina, elimination of thianthrene (Th) and phenoxathiin (PO) occurred almost quantitatively. Detailed studies with (7b-d) indicated that a cumulene (15) was formed by the elimination of Th and that 15 was subsequently converted into small amounts of other products. In CHCl3, these products were the respective alkyne, thianthrene 5-oxide, an alpha-diketone (11), an alpha-hydroxyalkyne (12), and hydrogen. The same products were formed in MeCN along with an alpha-acetamidoalkyne (13). The formation of 15 and products derived from it is explained and was confirmed by preparation and reactions of 2,3,4-hexatriene.     

Reaction of thianthrene and phenoxathiin cation radicals with 2,3-dimethyl-2-butene. Chemical and electrochemical studies

Thianthrene cation radical tetrafluoroborate (Th*+ BF4-) has been found to add to 2,3-dimethyl-2-butene (DMB) at 0 degrees C and -15 degrees C. The adduct, 2,3-dimethyl-2,3-(5,10-thianthreniumdiyl)butane ditetrafluoroborate (12), was isolated at -15 degrees C, and its 1H NMR spectrum was recorded at that temperature. The adduct was stable in CD3CN solution at -15 degrees C but decomposed slowly at 0 degrees C and quickly at 23 degrees C, forming the salt of 2,4,4,5,5-pentamethyl-2-oxazoline (8) with loss of thianthrene (Th). These results explain why earlier attempts to prepare 12 and detect its formation at room temperature with NMR spectroscopy were not successful. Reaction of Th*+ with DMB was followed with cyclic voltammetry and was found to exhibit redox catalysis in which Th was regenerated. With the faster scanning techniques of cyclic voltammetry, the formation of 12 was detectable, with a reduction potential of about -1.0 V at 25 degrees C and 3 degrees C. The observed reduction potential was in harmony with reduction potentials of a number of other, stable monoadducts. Thus, the redox catalysis involved the rapid formation of 12 and its rapid decomposition into 8 and Th, the newly formed Th being responsible for the observed enhanced oxidation currents. In contrast, 8 appears to be formed directly by oxidation of DMB by PO*+PF6-.     

Flash photolysis of (E)-1,2-bis(1-chloro-1-phenylmethyl)cyclopropane. Generation of 1,5-diphenylpentadienyl radical and 1,5-diphenylpentadienylium cation

The 1,5-diphenylpentadienyl radical (5) is generated from (E)-1,2-bis(1-chloro-1-phenylmethyl)cyclopropane (1) via a two-photon process, either in cyclohexane or in acetonitrile as solvent. Two-laser two-color flash photolysis experiments show that excitation of the benzylic radical generated by homolysis of the first C-Cl bond leads, after ring-opening and proton loss, to the stabilized radical 5. This radical is also generated by photolysis of either (1E,3E)-5-chloro-1,5-diphenyl-1,3-pentadiene (6) or (1E,4E)-1,5-diphenyl-1,4-)pentadiene (7) via one-photon or two-photon processes, respectively. On the other hand, laser flash photolysis of 1 in acetonitrile also produces some 1,5-diphenylpentadienylium cation (10) generated via a one-photon process. Its formation can be explained as due to competitive photoheterolysis leading to a benzylic cation which thermally ring-opens and dehydrohalogenates. Species 10 is more efficiently generated by photolysis of 6 in acetonitrile and undergoes photoisomerization after laser excitation.     

Mono- and bisadducts from the addition of thianthrene cation radical salts to cycloalkenes and alkenes

Thianthrene cation radical salts, Th(*)(+) X(-)(X(-) = a, ClO(4)(-); b, PF(6)(-); c, SbF(6)(-)), add to cycloalkenes (C(5)-C(8)) in acetonitrile (MeCN) to form 1,2-bis(5-thianthreniumyl)cycloalkane salts and 1,2-(5,10-thianthreniumdiyl)cycloalkane salts, most of which have now been isolated and characterized. These are called bis- (3, 6, 9, 12) and monoadducts (4, 7, 10, 13). The proportional amount of the monoadduct obtained in the initial stage of the reaction varied with the cycloalkene in the order C(6) < C(5) < C(7) < C(8). Thus, the ratio bis:mono for C(5) and C(7) was, respectively, about 80/20 and 50/50. In contrast, only about 5% of the C(6) monoadduct (7a) and none of 7b,c was obtained, while for C(8) none of the bisadducts 12a-c was found. Bisadducts 3 and 9 lost thianthrene (Th) slowly in MeCN solution and changed into monoadducts 4 and 10. A comparable change from 6a into 7a was not observed. The monoadducts, themselves, lost a proton slowly in dry MeCN and opened into 1-(5-thianthreniumyl)cycloalkenes (5, 8, 11, 14). With 3 and 9, particularly, it was possible to follow with NMR spectroscopy the succession of changes, for example, 3 to 4 to 5. The opening of a monoadduct was made faster by adding a small amount of water to the solution. The bisadducts of 4-methylcyclohexene (15a) and 1,5-cyclooctadiene (17a) were isolated and characterized. Although a small amount of monodduct (16a) of 4-methylcyclohexene was found with NMR spectroscopy, it could not be isolated. Bis- and monoadducts were obtained also in additions of Th(*)(+) ClO(4)(-) to acyclic alkenes, in relative amounts that, again, varied with the alkene. From cis-2-butene the dominant product was the bisadduct (18), while the monoaduct (19) was characterized with NMR spectroscopy but could not be isolated. In contrast, trans-3-hexene gave mainly the monoadduct (21), while the bis adduct (20) could not be isolated. With 4-methyl-cis-2-pentene, both bis- (22) and monoadduct (23) were isolated, the former being dominant. The conversion of 18 into 19 was characterized with NMR spectroscopy. In all cycloalkene bisadducts, the configurational relationship of the two thianthrenium groups was trans, while in the monoadducts, the bonds to the single thianthrene dication were (necessarily) cis. In both bis- and monoadducts of acyclic alkenes, the configuration of the alkene was retained. The mechanisms of addition with retention of configuration, of conversion of a bis- into a monoadduct, and of opening of a monoadduct are discussed. Products were identified with a combination of NMR spectroscopy, X-ray crystallography, elemental analysis, and (for cycloalkene adducts) reaction with thiophenoxide ion.     

Reactions of Arenediazonium Tetrafluoroborates with 1,4-Bis(acryloyloxy)butane in the Presence of Thiocyanate Ion

The first thiocyanatoarylation reaction with an unsaturated compound containing two isolated multiple bonds, 1,4-bis(acryloyloxy)butane, was effected. The reactions of 1,4-bis(acryloyloxy)butane with arenediazonium tetrafluoroborates occur in aqueous acetone (1:2) in the presence of copper tetrafluoroborate and thiocyanate ion and involve only one multiple bond to give 1-acryloyloxy-4-(2-thiocyanato-3-arylpropionyloxy)butanes. Irrespective of reactant ratio, the second multiple bond undergoes no thiocyanatoarylation.     

Behaviour of [PdH(dppe)2]X (X=CF3SO3-, SbF6-, BF4-) as proton or hydride donor: relevance to catalysis

The synthesis, characterization and properties of [PdH(dppe)(2)](+)CF(3)SO(3) (-).0.125 THF (1; dppe=1,2-bis(diphenylphosphanyl)ethane) and its SbF(6) (-) (1') and BF(4) (-) (1") analogues, the missing members of the [MH(dppe)(2)](+)X(-) (M=Ni, Pd, Pt) family, are described. The Pd hydrides are not stable in solution and can react as proton or hydride donors with formation of dihydrogen, [Pd(dppe)(2)](2+) and [Pd(dppe)(2)]. Complexes 1-1" react with carbocations and carbanions by transferring a hydride and a proton, respectively. Such H(-) or H(+) transfer occurs also towards unsaturated compounds, for example, hydrogenation of a C=C double bond. Accordingly, 1 can hydrogenate methyl acrylate to methyl propionate. Complex 1" is an effective (hourly turnover frequency=16) and very selective (100 %) catalyst for the hydrogenation of cyclohexen-2-one to cyclohexanone with dihydrogen under mild conditions. Density functional calculations coupled with a dielectric continuum model were carried out to compute the energetics of the hydride/proton transfer reactions, which were used to rationalize some of the experimental findings. Theory provides strong support for the thermodynamic and kinetic viability of a tetracoordinate Pd complex as an intermediate in the reactions.     

Reaction of arenediazonium tetrafluoroborates with 3-(allyloxy)propane-1,2-diol and 2,2-bis(allyloxymethyl)butan-1-ol in the presence of thiocyanates

The reactions of arenediazonium tetrafluoroborates with 3-(allyloxy)propane-1,2-diol and 2,2-bis(allyloxymethyl)butan-1-ol in the presence of the thiocyanate nucleophile were used to obtain 3-(3-aryl-2-thiocyanatopropoxy)propane-1,2-diols and 2-[(allyloxy)methyl]-2-[(3-aryl-2-thiocyanatopropoxy)methyl]-butan-1-ols. Irrespective of reagent ratio, the second allyl fragment of 2,2-bis(allyloxymethyl)butan-1-ol fails to enter thiocyanatarylation. The presence of hydroxy groups in the unsaturated compounds studied render the latter less reactive than allyl derivatives containing no such groups.Translated from Zhurnal Obshchei Khimii, Vol. 74, No. 12, 2004, pp. 2019–2022.Original Russian Text Copyright © 2004 by Grishchuk, Baranovskii, Kovalskii, Gorbovoi.This revised version was published online in April 2005 with a corrected cover date.     

Heteroatomic derivatives of aziridine. 14. Reactions of 1-(carbomethoxyethyl)-, 1-[1,2-bis(carbethoxy)ethyl]-, and 1-[1,2-bis(carbomethoxy)vinyl]aziridine with thiols, 1,2-ethanedithiol,and thiolcarboxylic acids

The reactions of 1-(carbomethoxyethyl)-, 1-[1,2-bis(carbethoxy)-ethyl]-, and 1-[1,2-bis(carbomethoxy)vinyl]aziridine with thiols and thiolcarboxylic acids produce the corresponding sulfides and esters of S-substituted N-(2-mercaptoethyl) amino acids. The reaction of 1-[1,2-bis(carbethoxy)ethyl]aziridine with 1,2-ethane-dithiol results in the formation of {1,8-bis[1,2-bis(carbethoxy)-ethyl]amino}-3,6-dithiaoctane. Cyclization of the latter by condensation with phthaloyl chloride gives 9,10-benzo-8,11-dioxo-1,4-dithia-7,12-bis[1,2-bis(carbethoxy)ethyl]-7,12-diazacyclotetradec-9-ene.For report 13 see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1340–1342, October, 1984.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.     

Synthesis of 1-(2-ethyl-3-indolyl)-1-(3-pyridyl)ethylene and related ellipticine analogues

Indole, 2-methylindole, and 3-etliylindole have been condensed with acetyl- and propionylpyridine, respectively. When propionylpyridine was used as the reactant, the product always was a 1-(pyridyl)-1-indoly[propylene. Condensation of 2-substituted indoles with 3-acetylpyridine gave similar products, whereas a similar condensation with 4-acetylpyridine gave 1,2-bis(3-indolyl)-1-(4-pyridyl)ethanes (e.g. 7a ). Condensation of unsubstituted indole with 3-or 4-acetylpyridine respectively, gave 1,1-bis(3-indolyl)-1-(pyridyl)ethanes (e.g. 6c ).     

含1,2-双(3,5-二氧哌嗪-1)乙烷和(±)-1,2-双(3,5-二氧哌嗪-1)丙烷低聚物的合成

<正> 将低分子药物或有药理活性的基团,通过高分子化,所得的高分子药物,具有较高的为细胞吞噬或胞饮等活性,并期望它们在体内崩解缓释,与相应的低分子药物相比,可以发挥长效、低毒的优点。 1,2双-(3,5-二氧哌嗪-1)乙烷和(±)1,2双(3,5-二氧哌嗪-1)丙烷,是临床使用     

Extended-chain, multinuclear transition metal complexes bridged by cyanodiazenido(1-), [N=N-C[triple bond, length as m-dash]N]-, ligands

Extended-chain complexes containing multiple transition metal centres linked by conjugated micro-cyanodiazenido(1-) ligands [N=N-C[triple bond, length as m-dash]N]- have been obtained by reaction of trans-[BrW(dppe)2(N2CN)], , [dppe=1,2-bis(diphenylphosphino)ethane] with dirhodium(II) tetra-acetate, bis(benzonitrile)palladium(II) dichloride, and bis(aqua)M(II) bis(hexafluoroacetylacetonate) (M=Mn, Ni, Cu, Zn): stronger Lewis acids such as tetrakis(acetonitrile)palladium(II) tetrafluoroborate and boron trifluoride promote hydrolysis of complex , leading to the isolation of a novel carbamoylhydrazido(2-) complex, trans-[BrW(dppe)2(N2HC=ONH2)]+[BF4]-.     

EPR studies of amine radical cations. Part 2. Thermal and photo-induced rearrangements of propargylamine and allylamine radical cations in low-temperature freon matrices

Matrix EPR studies and quantum chemical calculations have been used to characterize the consecutive H-atom shifts undergone by the nitrogen-centered parent radical cations of propargylamine (1b*+) and allylamine (5*+) on thermal or photoinduced activation. The radical cation rearrangements of these unsaturated parent amines occur initially by a 1,2 H-atom shift from C1 to C2 with pi-bond formation at the positively charged nitrogen; this is followed by a consecutive reaction involving a second H-atom shift from C2 to C3. Thus, exposure to red light (lambda > 650 nm) converts 1b*+ to the vinyl-type distonic radical cation 2*+ which in turn is transformed on further photolysis with blue-green light (lambda approximately 400-600 nm) to the allene-type heteroallylic radical cation 3*+. Calculations show that the energy ordering is 1b*+ > 2*+ > 3*+, so that the consecutive H-atom shifts are driven by the formation of more stable isomers. Similarly, the parent radical cation of allylamine 5*+ undergoes a spontaneous 1,2-hydrogen atom shift from C1 to C2 at 77 K with a t1/2 of approximately 1 h to yield the distonic alkyl-type iminopropyl radical cation 6*+; this thermal reaction is attributed largely to quantum tunneling, and the rate is enhanced on concomitant photobleaching with visible light. Subsequent exposure to UV light (lambda approximately 350-400 nm) converts 6*+ by a 2,3 H-shift to the 1-aminopropene radical cation 7*+, which is confirmed to be the lowest-energy isomer derived from the ionization of either allylamine or cyclopropylamine. Although the parent radical cations of N, N-dimethylallylamine (9*+) and N-methylallylamine (11*+) are both stabilized by the electron-donating character of the methyl group(s), the photobleaching of 9*+ leads to the remarkable formation of the cyclic 1-methylpyrrolidine radical cation 10*+. The first step of this transformation now involves the migration of a hydrogen atom to C2 of the allyl group from one of the methyl groups (rather than from C1); the reaction is then completed by the cyclization of the generated MeN + (=CH2) CH2CH2CH2* distonic radical cation, possibly in a concerted overall process. In contrast to the ubiquitous H-atom transfer from carbon to nitrogen that occurs in the parent radical cations of saturated amines, the alternate rearrangements of either 1b*+ or 5*+ to an ammonium-type radical cation by a hypothetical H-atom shift from C1 to the ionized NH2 group are not observed. This is in line with calculations showing that the thermal barrier for this transformation is much higher (approximately 120 kJ mol-1) than those for the conversion of 1b*+ --> 2*+ and 5*+--> 6*+ (approximately 40-60 kJ mol-1).     

Carbodications. 4.(1) Hydrogen Isotope Exchange of Crotonyl Cations in Superacid

The title ion reacts in 1:1 DF-SbF(5) and exchanges up to five protium atoms with deuterium. The incorporation of label was measured by GC-MS analysis of the methyl crotonate formed by methanol quenching. The isotopomer distribution at about 60% conversion, which shows a minimum for the d(1) and a maximum for the d(4) species, indicates that the intermediate dication with the second charge at C(3) loses a proton faster from C(4) than from C(2). Formation of the pentadeuteriocrotonyl cation indicates that the 1,4-dication (acyl primary alkyl) or the 1,2-dication must intervene in the process. Computer modeling of the kinetics for the multiple exchange process to fit the experimental deuterium distribution allowed determination of the relative rate constants and isotope effects (KIEs) for the formation of the carbocations from alkenoyl cations (beta-secondary KIE) and elimination from carbodications to alkenoyl cations (primary KIE). An exceptionally large beta-secondary KIE of ca. 2.0/hydrogen was found for the formation of the dication. A small primary isotope effect of ca. 1.5 was found for elimination from the dications to the alkenoyl cations. Elimination from the 1,3-acylalkyl dication to form the nonconjugated 3-butenoyl cation is 6-7 times faster than elimination to the conjugated 2-butenoyl cation. The rate ratio for the conversion of 3-butenoyl cation to the 1,4-dication (primary alkyl cation) and 1,3-dication (secondary alkyl cation) is (0.025-0.030):1, whereas the relative rate of the formation of the 1,2-acylalkyl dication (the alternative route of achieving pentadeuteration) is zero.     

One-electron oxidation of 2-(4-methoxyphenyl)-2-methylpropanoic and 1-(4-methoxyphenyl)cyclopropanecarboxylic acids in aqueous solution. the involvement of radical cations and the influence of structural effects and pH on the side-chain fragmentation reactivity

A product and time-resolved kinetic study on the one-electron oxidation of 2-(4-methoxyphenyl)-2-methylpropanoic acid (2), 1-(4-methoxyphenyl)cyclopropanecarboxylic acid (3), and of the corresponding methyl esters (substrates 4 and 5, respectively) has been carried out in aqueous solution. With 2, no direct evidence for the formation of an intermediate radical cation 2*+ but only of the decarboxylated 4-methoxycumyl radical has been obtained, indicating either that 2*+ is not formed or that its decarboxylation is too fast to allow detection under the experimental conditions employed (k > 1 x 10(7) s(-1)). With 3, oxidation leads to the formation of the corresponding radical cation 3*+ or radical zwitterion -3*+ depending on pH. At pH 1.0 and 6.7, 3*+ and -3*+ have been observed to undergo decarboxylation as the exclusive side-chain fragmentation pathway with rate constants k = 4.6 x 10(3) and 2.3 x 10(4) s(-1), respectively. With methyl esters 4 and 5, direct evidence for the formation of the corresponding radical cations 4*+ and 5*+ has been obtained. Both radical cations have been observed to display a very low reactivity and an upper limit for their decay rate constants has been determined as k < 10(3) s(-1). Comparison between the one-electron oxidation reactions of 2 and 3 shows that the replacement of the C(CH3)2 moiety with a cyclopropyl group determines a decrease in decarboxylation rate constant of more than 3 orders of magnitude. This large difference in reactivity has been qualitatively explained in terms of three main contributions: substrate oxidation potential, stability of the carbon-centered radical formed after decarboxylation, and stereoelectronic effects. In basic solution, -3*+ and 5*+ have been observed to react with -OH in a process that is assigned to the -OH-induced ring-opening of the cyclopropane ring, and the corresponding second-order rate constants (k-OH) have been obtained. With -3*+, competition between decarboxylation and -OH-induced cyclopropane ring-opening is observed at pH >or=10, with the latter process that becomes the major fragmentation pathway around pH 12.     

Copper(II) complexes of a series of polypyridine ligands possessing a 1,2-bis(2-pyridyl)ethane common moiety: incorporation and hydrolysis of phosphate esters

Two tetradentate ligands 1,2-bis[2-((dimethylamino)methyl)-6-pyridyl]ethane (L1) and 1,2-bis[2-(N-piperidinomethyl)-6-pyridyl]ethane (L2) and a hexadentate ligand 1,2-bis(2-((methyl(pyridylmethyl)amino)methyl)-6-pyridyl)ethane (L3) were prepared as part of a series of new polypyridine ligands possessing a 1,2-bis(2-pyridyl)ethane common moiety. L1 and L2 form mononuclear Cu(II) complexes [Cu(L)(Cl)](ClO4) [L = L1 (1) and L2 (2)], respectively. L3 forms a dinuclear Cu(II) complex [Cu2(L3)((PhO)2PO2)2](ClO4)2 (3) or a hexanuclear Cu(II) complex [Cu6(L3)3((PhO)PO3)4](ClO4)4 (4) in the presence of (PhO)2PO2- monoanion or (PhO)PO3(2-) dianion, respectively. The structures of 1-4 were determined by X-ray analysis. The structures in solution were investigated by means of FAB and CSI MS spectrometers. The structural flexibility of the common 1,2-bis(2-pyridyl)ethane moiety and of the pendant groups allows complexes 1-4 to adapt to the various structures. Each Cu ion in 1 and 2 adopts a square pyramidal geometry with one Cl ion and two pendant groups (L1 and L2) binding in a bis-bidentate chelate mode. There is no steric repulsion between the pendant groups, so that the ligands specifically stabilize the mononuclear structures. L3 binds two Cu(II) ions with two pendant groups in tridentate chelate modes and, with the incorporation of phosphate esters, various dinuclear units are formed in 3 and 4. In 4, a dinuclear unit of [Cu2(L3)]4+ links two dinuclear units of [Cu2(L3)(PhOPO3)2] with four (mu3)-1,3-PhOPO3(2-) bridges. The hydrolytic activity of 2 and a dicopper(II) complex of L3 was examined with tris(p-nitrophenyl) phosphate (TNP) as a substrate.     

Lipase-catalyzed transesterification of 2-hydroxy-2-(pentafluorophenyl)acetonitrile leading to (1R,2R)- and (1S,2S)-bis(pentafluorophenyl)ethane-1,2-diol

Optically pure (1R,2R)- and (1S,2S)-1,2-bis(pentafluorophenyl)ethane-1,2-diol (1) were synthesized from key intermediates (R)- and (S)-2-hydroxy-2-(pentafluorophenyl)acetonitrile (2), both of which were prepared by the lipase LIP-catalyzed transesterification (E = 465). The absolute configuration of (S)-2 was determined by X-ray structural analysis after transformation into (S)-alpha-cyano-2,3,4,5,6-pentafluorobenzyl (S)-6-methoxy-alpha-methyl-2-naphthaleneacetate (S,S)-9. In addition, the crystal structure of (S,S)-9 has an interesting well-ordered packing pattern which shows face-to-face stacking interactions and end-to-end parallel contacts between the pentafluorophenyl and 6-methoxynaphthyl groups of the adjacent molecules.     

Synthesis, electrochemistry, and gas-phase photoelectron spectroscopic and theoretical studies of 3,6-bis(perfluoroalkyl)-1,2-dithiins

3,6-bis(trifluoromethyl)- and 3,6-bis(pentafluoroethyl)-1,2-dithiin (1a,b), the first known perfluoroalkyl-substituted 1,2-dithiins, were synthesized from (Z,Z)-1,4-bis(tert-butylthio)-1,3-butadiene (2) to evaluate the effects of electron-withdrawing groups on the ionization and oxidation potentials of 1,2-dithiins. Analysis of the photoelectron spectra of 1a and 1b provided a basis for assigning orbital compositions. Ab initio calculations on these compounds showed that they adopt a twist geometry as does 1,2-dithiin (1c) itself. Cyclic voltammetric studies on 1a and 1b revealed a reversible oxidation followed by an irreversible oxidation at much more positive potentials than for 1,2-dithiin and 3,6-dimethyl-1,2-dithiin (1d). The oxidation potentials determined electrochemically do not correlate with the ionization potentials determined by photoelectron spectroscopy. This result supports the previously advanced hypothesis that there is a geometry change on electrochemical oxidation leading to a planar radical cation.