竖直振动颗粒床对流机制的颗粒尺度实验研究

为了得到竖直振动颗粒床形成对流的运动模式及形成机制,本文通过高速摄影技术对竖直振动颗粒床进行了实验研究。实验发现,随着振动加速度的增加,对流环覆盖的粒子层数和强度明显增加。通过分析颗粒速度矢量图的演化,可以获得控制对流运动的各种应力波在在粒子床中传播的信息,发现应力波的强度和持续时间与振动加速度密切相关。通过实验发现,对流运动发端于重力波面上粒子从侧壁向粒子床中心的不可逆跃迁,这种横向对流的强度与重力波面的曲率密切相关,而持续的时间随粒子床振动周期的变化而变化。     

Particle shape consideration in numerical simulation of assemblies of irregularly shaped particles

The mechanical behavior of granular materials depends much on the shape of the constituent particles. Therefore appropriate modeling of particle, or grain, shape is quite important. This study employed the method of direct modeling of grain shape (Matsushima & Saomto, 2002), in which, the real shape of a grain is modeled by combining arbitrary number of overlapping circular elements which are connected to each other in a rigid way. Then, accordingly, a discrete-element program is used to simulate the assembly of grains. In order to measure the effects of grain shape on mechanical properties of assembly of grains, three types of grains—high angular grains, medium angular grains and round grains are considered where several biaxial tests are conducted on assemblies with different grain types. The results show that the angularity of grains greatly affects the behavior of granular soil.     

基于离散单元法的颗粒阻尼耗能减振特性研究

采用离散单元法并从能量耗散的角度研究颗粒阻尼对系统减振特性的影响。建立了颗粒介质细观下的法向、切向和滚动方向的粘弹性接触模型和能量耗散模型,通过冲击激励和简谐激励下系统振动响应的多参数能量耗散分析来研究颗粒阻尼的耗能机理和减振特性。数值试验表明,颗粒介质可以在一个较宽的振动幅值范围内有效的发挥其阻尼效应,其耗能具有阶梯状周期性的特点。填充率是影响颗粒阻尼耗能减振效果的主要工程可控参数并对系统共振频率产生重大影响,当填充率接近极值时,系统出现无阻尼共振及共振频率超出无颗粒系统固有频率的现象。系统在最优填充率下共振时,颗粒与箱体保持恒定相位差的超振幅稳态运动。较小粒径的颗粒可以提高能量耗散率并使振动系统更快趋向静平衡状态,而恢复系数和摩擦系数则对法向和切向耗能的比值有较大影响。     

稠密气固两相流各向异性颗粒相矩方法

基于气体分子动力学和颗粒动理学方法,考虑颗粒速度脉动各向异性,建立颗粒相二阶矩模型.应用初等输运理论,对三阶关联项进行模化和封闭.考虑颗粒与壁面之间的能量传递和交换,建立颗粒相边界条件模型.采用Koch等计算方法模拟气固脉动速度关联矩.考虑气体-颗粒间相互作用,建立稠密气体-颗粒流动模型.数值模拟提升管内气固两相流动特性,模拟结果表明提升管内颗粒相湍流脉动具有明显的各向异性.预测颗粒速度、浓度和颗粒脉动速度二阶矩与Tartan等实测结果相吻合.模拟结果表明轴向颗粒速度脉动强度约为平均颗粒相脉动强度的1.5倍,轴向颗粒脉动能大约是径向颗粒脉动能3.0倍.     

Vibration control of nonlinear Absorber–Isolator-Combined structure with time-delayed coupling

A nonlinear combined structure consisted of isolator and absorber with time-delayed coupling active control is proposed in this study, whose vibration suppression effectiveness and control mechanism are investigated. The mathematical model of the combined structure is obtained and stability analysis for different structural parameters and time delay are firstly carried out, which provides a general guideline for the ranges of active control parameters. Then the combined effect of nonlinearity and time delay on vibration suppression and energy transfer is discussed in details based on the analysis of control mechanism by the method of multiple scales. Since the time-delayed nonlinear absorber can induce internal resonance between different modes, the vibration energy at low frequencies can be transferred to high frequency mode and the vibration of the fundamental frequency range is thus suppressed. This paper provides a novel application of internal resonance in vibration suppression of an Absorber–Isolator-Combined structure.     

Representative elementary volume analysis of polydisperse granular packings using discrete element method

The representative elementary volume (REV) for three-dimensional polydisperse granular packings was determined using discrete element method simulations. Granular mixtures of various sizes and particle size distributions were poured into a cuboid chamber and subjected to uniaxial compression. Findings showed that the minimum REV for porosity was larger compared with the REV for parameters such as coordination number, effective elastic modulus, and pressure ratio. The minimum REV for porosity and other parameters was found to equal 15, 10, and 5 times the average grain diameter, respectively. A study of the influence of sample size on energy dissipation in random packing of spheres has also confirmed that the REV size is about 15 times the average grain diameter. The heterogeneity of systems was found to have no effect on the REV for the parameters of interest for the narrow range of coefficient of uniformity analyzed in this paper. As the REV approach is commonly applied in both experimental and numerical studies, determining minimum REV size for polydisperse granular packings remains a crucial issue.     

表面能对纳米颗粒的晶格收缩和固有频率的影响

由于纳米颗粒具有很大的比表面积，因此，表面能对它的力学性能有着不可忽略的影响．本文给出了由表面能所导致的纳米颗粒晶格收缩效应的解析结果，与试验观察定量上相当一致；计算了表面能对纳米颗粒固有频率的影响，预测了由于表面能的影响，纳米颗粒出现的“振动软化”现象．     

Experimental and numerical study of installing a dune model in a 90° bend in the horizontal-vertical pneumatic conveying system

In the pneumatic conveying process, particles move to the bend under the influence of inertia to form a particle rope, which will cause serious wear between the particles and the pipe wall, and then the dune model is designed and installed in the 90° bend to reduce energy consumption and wear in this study. Firstly, the minimum pressure drop velocity of particles transported by different size dune models was obtained through experimental study. Then the energy saving mechanism of the dune model is studied by CFD-DEM coupling. The experimental results show that the installation of the dune model reduces the minimum pressure drop velocity. The numerical simulation results show that the number of collisions between the particles and the tube wall in the vertical tube decreases after the installation of the dune model, which reduces the energy loss. Moreover, the increasing of tail size of the dune model is beneficial to the diffusion and acceleration of the particles in the vertical tube.     

不同尺度分布散粒材料砂堆形成过程的二维离散元模拟

用作者开发的离散元程序,模拟不同尺寸分布的砂堆形成过程.把散体颗粒简化为圆形颗粒,模拟过程分三步:首先利用参考网格生成颗粒的松散堆积结构;为了避免颗粒下落的冲击作用对砂堆安息角的影响,先模拟颗粒在重力作用下在圆柱容器内的自由下落与堆积,直至堆积达到稳定;最后,移除容器,只保留一个底部边界,模拟颗粒体系的散落过程,直至形成一个稳定的砂堆.模拟结果表明,在其他参数保持相同的情况下,随着颗粒尺寸的减小,砂堆的安患角逐步减小并趋向于一常值.对模拟中的两组颗粒体系进行相同条件下的砂堆形成实验,结果表明,模拟与实验所得安息角大体相当.     

Separation efficiency of liquid–solid undergoing vibration based on breakage of liquid bridge

Vibrating separation is a significant method for liquid–solid separation. A typical example is the vibrating screen to dewater wet granular matter. The properties of granular matter and the vibrating parameters significantly affect the separation efficiency. This study investigates the effect of vibration parameters in separation based on the breakage of large-scale liquid bridge numerically by using a calibrated simulation model. Through analysing the simulation results, the liquid bridge shape and the volume between two sphere particles for various particle sizes and particle distances were studied in the static condition under the effect of gravity. The results show a general reducing trend of liquid bridge volume when the radius ratio of two particles increases, particularly when the ratio increases to 5. Additionally, a set of vibrating motion was applied to the liquid bridge in the simulation model. A group of experiments were also performed to validate the simulation model with vibration. Then, the effect of vibrating peak acceleration, distance between spheres and radius on the separation efficiency which was reflected by the residual water were investigated. It is found that separation efficiency increased obviously with the peak acceleration and the increase slowed down after the peak acceleration over 1 m/s².     

Experimental Study of Nonlinear Resonances and Anti-Resonances in a Forced,Ordered Granular Chain

We experimentally study a one-dimensional uncompressed granular chain composed of a finite number of identical spherical elastic beads with Hertzian interactions. The chain is harmonically excited by an amplitude- and frequency-dependent boundary drive at its left end and has a fixed boundary at its right end. Such ordered granular media represent an interesting new class of nonlinear acoustic metamaterials, since they exhibit essentially nonlinear acoustics and have been designated as “sonic vacua” due to the fact that their corresponding speed of sound (as defined in classical acoustics) is zero. This paves the way for essentially nonlinear and energy-dependent acoustics with no counterparts in linear theory. We experimentally detect time-periodic, strongly nonlinear resonances whereby the particles (beads) of the granular chain respond at integer multiples of the excitation period, and which correspond to local peaks of the maximum transmitted force at the chain’s right, fixed end. In between these resonances we detect a local minimum of the maximum transmitted forces corresponding to an anti-resonance in the stationary-state dynamics. The experimental results of this work confirm previous theoretical predictions, and verify the existence of strongly nonlinear resonance responses in a system with a complete absence of any linear spectrum; as such, the experimentally detected nonlinear resonance spectrum is passively tunable with energy and sensitive to dissipative effects such as internal structural damping in the beads, and friction or plasticity effects. We compare the experimental results with direct numerical simulations of the granular network and deduce satisfactory agreement.     

Collisions in a liquid fluidized bed

Collisional phenomena in a solid–liquid flow were studied in terms of two parameters: the collision frequency and the coefficient of restitution. Experimental measurements of these parameters were conducted inside a liquid fluidized bed by particle tracking in an index-matched array. Collision detection was based on the use of a peak acceleration threshold of the instantaneous speed of colored tracers. The measurements of collision frequency were compared with the theoretical expression derived from the kinetic theory for granular flow (KTGF). The normal and tangential restitution coefficients were measured from the trajectories before and after contact for both particle–particle and particle–wall collisions. A comparison with previous theoretical and experimental works is presented and discussed.     

Dust modelling using a combined CFD and discrete element formulation

The production and dispersal of airborne dust is an important issue in both environmental and industrial contexts. Dust pollution is a major environmental concern, and long exposure in occupational settings has been linked with numerous respiratory health issues. Industrial dust pollution can also present a significant explosion hazard, even in facilities with dust extraction systems. Computational models for dust generation and dispersal have, however, generally been formulated for specific geophysical applications and restricted to static, two‐dimensional, approaches. Here, we present a method for simulating dust production from a dynamic granular bed by using a three‐dimensional coupled discrete element method and Navier–Stokes computational model. Dust production is based on an energy formulation in which micro‐scale dust particles are assumed to overcome cohesion to macro‐scale grains. This model is used over the entire range of energies present within the system, from macro‐scale collisions to aerodynamic entrainment and bombardment of micro‐scale particles. The dust concentration is modelled as a scalar density field, which is advected and diffused through turbulence in the gas flow field. The model is tested against empirical predictions for two test cases, a slug of granular material dropped from a set height and air flow over a granular stockpile. Both give good agreement to the empirical relations, showing that the model can accurately predict the production and subsequent dispersal of dust from a dynamic granular bed. Copyright © 2012 John Wiley & Sons, Ltd.     

Nonequilibrium identities of granular vibrating beds

We derive the integral fluctuation theorem around a nonequilibrium stationary state for frictionless and soft core granular particles under an external vibration achieved by a balance between an external vibration and inelastic collisions. We also derive the standard fluctuation theorem and the generalized Green–Kubo formula for this system.     

Grain- and macro-scale kinematics for granular micromechanics based small deformation micromorphic continuum model

Macro-scale deformation of granular solids comprising large number of grains (>10⁶) are most efficiently described within the framework of continuum mechanics. It is notable, however that the micro-scale deformations in these materials are concentrated at the grain-boundaries or grain-contacts. Thus, the deformation energies in these systems must be modeled by considering the deformations concentrated in the neighborhood of the grain-boundaries or grain-contacts. To address this issue, grain-interactions has been widely described in the Hertzian sense by considering the relative movement of points on either side of a grain boundary or contact treated as an imperfect interface. This communication introduces the relevant kinematic variables given in the terms of the grain displacements, spins and size that can be used to estimate the relative movement of a grain boundary or contact. The macro-scale kinematic variables useful for continuum modeling are then identified with the grain-scale kinematic variables. The deformation energy density of the granular solid can thus be expressed both in terms of the grain-scale as well as the macro-scale kinematic variables providing the necessary pathway for micro-macro identification which can lead to non-classical micromorphic continuum models that incorporate grain-scale representation.     

Laser stripe measurements of near-wall solid fraction in channel flows of liquid-granular mixtures

A simple, robust, and accurate imaging technique is proposed to measure granular concentration profiles in channel flows of liquid-granular mixtures. We focus on moderate to high granular concentrations (5–50%), for which optical access is restricted to regions close to a transparent wall. To measure concentrations in this range, we illuminate solid grains moving near the wall using a transverse laser light sheet. The evolving shape of the laser stripe, deformed by passing grains, is then monitored using an oblique camera. Statistics of the granular distance to wall can thus be acquired and converted to volumetric solid fraction measurements. The method is verified using fluidization cell tests and applied to open-channel sheet flow experiments. Free of any parameter adjustment, the laser stripe method is found to yield good results, and allows joint measurements of granular velocity and solid fraction profiles.     

Nonlinear vibration of fluid-conveying single-walled carbon nanotubes under harmonic excitation

In this paper, the nonlinear vibration of a single-walled carbon nanotube conveying fluid is investigated utilizing a multidimensional Lindstedt–Poincaré method. Considering the geometric large deformation of the single-walled carbon nanotube and external harmonic excitation force, based on nonlocal elastic theory and Euler–Bernoulli beam theory, the nonlinear vibration equation of a fluid-conveying single-walled carbon nanotube is established. Analyzing the equation through the multidimensional Lindstedt–Poincaré method, and from the solvability condition of the nonlinear vibration equation, the cubic algebraic equation which indicates the amplitude–frequency relation is obtained. Based on the root discriminant of the cubic equation, the first order primary response of the pinned–pinned carbon nanotube is discussed. The relations among internal resonance, the amplitude and frequency of the external excitation force are analyzed in detail. When the external excite force frequency is around the first mode natural frequency, the first mode primary resonance occurs. If simultaneously the first two modes natural frequency ratio is around 3, internal resonance occurs and the internal resonance region depends on the amplitude of external excitation force.     

Primary pulse transmission in coupled steel granular chains embedded in PDMS matrix: Experiment and modeling

We present an experimental study of primary pulse transmission in coupled ordered steel granular chains embedded in poly-di-methyl-siloxane (PDMS) elastic matrix. Two granular one-dimensional chains are considered (an ‘excited’ and an ‘absorbing’ one), each composed of 11 identical steel beads of 9.5 mm diameter with the centerline of the chain spaced at fixed distances of 0.5, 1.5 or 2.5 mm apart. We directly force one of the chains (the excited one) by a transient pulse and measure, by means of laser vibrometry, the primary transmitted pulses at the end beads of both chains and at the first bead of the absorbing chain. It is well known that the dynamics of this type of ordered granular media is strongly nonlinear due, (i) to Hertzian interactions between adjacent beads, and (ii) to possible bead separations in the absence of compressive forces and ensuing collisions between neighboring beads. Accordingly, we develop a strongly nonlinear theoretical model that takes into account the coupling of the granular chains due to the PDMS matrix, with the aim to model primary pulse transmission in this system. After validating the model with experimental measurements, we employ it in a predictive fashion to estimate energy transfer between chains as a function of the interspatial distance between chains. Furthermore, based on this model we perform predictive matrix design to achieve maximum energy transfer from the excited to the absorbing chain, and provide a theoretical explanation of the nonlinear dynamics governing energy transfer (including energy equi-partition) in this system.