自制的红外掠角反射吸收光谱装置及其应用

自制的红外掠角反射吸收光谱装置及其应用陈铁峰，唐季安，江龙（中国科学院感光化学研究所，北京１００１０１）１引言随着傅里叶变换技术、新的实验手段和计算机应用的结合，红外光谱分析这一经典方法得到了迅速发展，并且在涉及诸如催化、电分析化学、微电子学、医学、...     

溶剂沸点对聚(3-己基噻吩)薄膜内链结构与分子取向的影响

以聚(3-己基噻吩)(P3HT)为研究对象,借助荧光相关光谱、紫外-可见光谱和掠角红外光谱考察了溶剂性质对旋涂膜内P3HT的链结构与分子取向的影响。结果表明:溶液中P3HT的分子链构象受溶解度的影响,当P3HT溶解在溶解性好的良溶剂中时,链构象更伸展;固体薄膜内P3HT的物理结构却不受其在溶剂中溶解度大小的影响而具有沸点依赖性,溶解在高沸点溶剂中的P3HT旋涂后,薄膜内P3HT主链平面性与π-π相互作用均得到提高;此外,溶剂沸点的增加导致分子取向由"面朝上"方式转变为"边朝上"方式。     

基于分子间侧向氢键作用的电光材料制备及性能

通过重氮耦合和酯化等反应制备了一系列侧向含有酰胺基团的偶氮苯类非线性光学生色团, 并将其与聚合物进行掺杂或通过分子间的侧向氢键作用制备了主客体型及超分子型的电光薄膜材料. 生色团的结构通过核磁共振谱(¹H NMR, NMR)、 红外光谱(IR)、 质谱(MS)和元素分析(EA)等进行了表征, 结果表明, 生色团形成了分子间的氢键作用. 通过紫外-可见(UV-Vis) 光谱研究了材料的极化性能. 相比主客体型电光薄膜材料, 由分子间侧向氢键作用形成的超分子型电光薄膜材料无需与聚合物基体材料复合, 更有利于提高材料的生色团含量、 极化取向度及稳定性. 通过Teng-Man简单反射法研究了主客体型和超分子型电光材料的二阶非线性光学性质, 结果表明, 基于分子间侧向氢键作用形成的超分子体系具有更大的电光系数.     

不锈钢基底上TiO2薄膜型光催化剂的制备和化学结构

采用钛酸正丁酯作为前驱体,通过溶胶-凝胶法在不锈钢基片上制备了TiO2纳米薄膜。利用俄歇电子能谱(AES)和紫外反射光谱等研究手段,对TIO2薄膜的化学结构及基底材料界面相互作用进行了系统研究。结果发现,在不锈钢基底上形成的TiO2薄膜与基底材料发生了明显的界面扩散反应。在TiO2薄膜的形成过程中,不锈钢中Fe元素向TiO2薄膜层扩散,并与从大气氛中扩散到界面的氧发生化学反应,形成铁氧化物界面过渡层。界面氧化过程,导致了Fe向样品表面的偏析和扩散。在高温热处理过程中,Fe可以扩散到TiO2薄膜的表面。薄膜催化剂的紫外反射光谱表明,界面扩散反应导致了Fe扩散进入TiO2薄膜的晶格,从而改变了薄膜催化剂的光吸收性能。     

掺杂钒和硅对TiO2薄膜超亲水性的影响

0引言 TiO2薄膜是众多氧化物半导体薄膜中研究最为广泛的一种材料．其表面的超亲水性和表面自清洁效应开辟了光催化薄膜功能材料的新的研究领域，已成为众多研究者研究的对象。但是如果薄膜仅由TiO2组成，当光照停止，水在TiO2薄膜表面的润湿角逐渐升高．并恢复原始状态。TiO2的禁带较宽，普通光线如太阳光等都不能将其激发．限制了其实际应用。因此如何使TiO2材料的光谱响应范围由紫外光反扩展到可见．光区一日如何更长时间地保持薄膜良好的亲水性是目前研究的重点。     

自组装膜中原位光反应固定化脱氧核糖核酸及膜稳定性

通过静电沉积的方法构筑了含有脱氧核糖核酸(DNA)和重氮树脂(DAR)的交替多层膜.在紫外光照射下,这种静电沉积多层膜相邻层间DNA上的磷酸基团与DAR上的重氮基团发生反应,从而将DNA共价连接到多层膜中.利用紫外-可见吸收光谱和掠角反射吸收傅里叶变换红外光谱(GRAFTIR)研究了这种相邻层间的光化学变化.刻蚀实验结果发现,与光照前相比,光照后的膜在盐溶液中的稳定性大大增强.     

CO在载钯分子筛薄膜电极上的增强红外吸收

以NaY分子筛超笼为微型反应器,通过“瓶中造船”技术合成钯原子簇(Pd₁₃).并首次把粗糙的分子筛薄膜电极引入到电化学原位红外反射光谱研究,发现了一类新的增强红外吸收现象.与金属钯电极相比,CO红外吸收带的谱峰强度显著增加,半峰宽加宽.研究结果表明,这种增强红外吸收取决于钯原子簇的纳米尺度及分子筛超笼的特殊环境.     

胆甾醇修饰羟基喹啉锌的聚集诱导荧光蓝移

用稳态光谱以及皮秒瞬态荧光光谱研究了新型有机电致发光分子胆甾醇修饰羟基喹啉锌(Zn(ChQ)2)的聚集诱导荧光蓝移性质. 在Zn(ChQ)2的极性溶剂溶液中, 分子激发后会发生从胆甾醇基团向喹啉环的光致电子转移, 转移后形成了“扭转的分子内电荷转移态”作为新的荧光发射态. 而在薄膜态中, 分子由于聚集产生空间位阻, 不能形成新的荧光发射态, 相对于极性溶剂中, 产生聚集荧光增强效应, 荧光发射峰会蓝移, 发射强度会增强. 在薄膜态中, 全波长上的超快荧光衰减说明存在分子间光致能量转移过程.     

不同溶剂对方块菁染料(SQ-3)LB膜吸收及荧光光谱的影响

利用荧光光谱、紫外可见吸收光谱研究了方块菁染料在不同极性的溶剂中的光谱性质的变化,并利用LB膜技术、Brewster角显微镜及荧光光谱、紫外可见吸收光谱研究了不同极性的铺展溶剂对染料的铺展形态及制备的LB膜样品的光谱性能的影响,说明了分子组装在形成功能薄膜中的重要性.     

基于多孔硅的葡萄糖光学传感器

本实验通过对多孔硅硅表面涂敷一层智能凝胶~([1～3]),并在凝胶内包埋上葡萄糖氧化酶,使多孔硅.壳聚糖凝胶复合材料对葡萄糖分子产生体积溶胀响应,由于多孔硅及凝胶均对光有较好的反射性能,凝胶的溶胀过程产生Fabry-Perot薄膜反射干涉光谱的变化,将反射干涉光谱进行傅立叶变换后,可实时监测凝胶层薄膜的溶胀响应.     

光驱动分子梭

分子梭在分子开关、分子逻辑门、信息存储等领域有着潜在的应用价值,是超分子化学领域的研究热点之一。本文综述了光驱动分子梭的研究进展：重点举例介绍了荧光光谱识别法和圆二色光谱识别法这两种识别光驱动分子梭位置状态的方法;阐述了构建光驱动轮烷分子梭的新型方法学,包括光驱动环糊精[2]轮烷和[1]轮烷分子梭的定向合成,举例介绍了光间接驱动的轮烷分子梭,以及光驱动[3]轮烷型分子梭和分子梭聚合物;举例说明了光驱动分子梭的功能性应用,用光驱动分子梭来模拟分子水平的逻辑门,研究光驱动分子梭体系中的能量传递机理,以及非溶液态的光驱动分子梭;并对分子梭今后的发展做了展望。     

新型复合分子筛的合成和催化应用

 系统地归纳总结了最近几年引起人们广泛关注的复合分子筛的研究进展,包括微孔-微孔复合分子筛、微孔-介孔复合分子筛、微孔-大孔复合分子筛及微孔-介孔-大孔复合分子筛的合成和应用近况. 并对复合分子筛的发展前景进行了展望.     

Nuclear magnetic resonance study of low molecular weight polychlorotrifluoroethylene

The molecular motion of low molecular weight polychlorotrifluroethylene of different molecular weights between 500 and 1300 was investigated by means of broad-line nuclear magnetic resonance measurements. The line width and second moment of the resonant absorption lines were obtained at temperatures from 77 to 300°K. The line narrowing for low molecular weight samples takes place in one step. In samples higher than 900 in molecular weight, however, there appears to be a glass transition process, and the line narrowing tends to occur in three steps. The line narrowing due to local molecular motion becomes observable with increasing molecular weight.     

Molecular Architectonics-guided Design of Biomaterials

The quest for mastering the controlled engineering of dynamic molecular assemblies is the basis of molecular architectonics. The rational use of noncovalent interactions to programme the molecular assemblies allow the construction of diverse molecular and material architectures with novel functional properties and applications. Understanding and controlling the assembly of molecular systems are daunting tasks owing to the complex factors that govern at the molecular level. Molecular architectures depend on the design of functional molecular modules through the judicious selection of functional core and auxiliary units to guide the precise molecular assembly and co-assembly patterns. Biomolecules with built-in information for molecular recognition are the ultimate examples of evolutionary guided molecular recognition systems that define the structure and functions of living organisms. Explicit use of biomolecules as auxiliary units to command the molecular assemblies of functional molecules is an intriguing exercise in the scheme of molecular architectonics. In this minireview, we discuss the implementation of the principles of molecular architectonics for the development of novel biomaterials with functional properties and applications ranging from sensing, drug delivery to neurogeneration and tissue engineering. We present the molecular designs pioneered by our group owing to the requirement and scope of the article while acknowledging the designs pursued by several research groups that befit the concept.     

Supramolecular chemistry

The article discusses molecular recognition and overviews the key concepts -storage and retrieval of chemical information by molecular structures, supramolecular reagents and catalysts, molecular transport, semiochemistry and self assembly. The prospects of controlling supramolecular architecture through engineered molecular recognition and design of ‘programmed systems’ controlled by molecular information are also discussed.     

聚对苯乙烯磺酸钠添加剂的分子量对水煤浆浆体性质的影响

选用了变质程度不同的八种煤和三种不同分子量的聚对苯乙烯磺酸钠（PSS）添加剂，详细考查了该添加剂的分子量对水煤浆浆体性质的影响。结果发现，在考查PSS相对分子量的范围内（质均分子量为5.34×104～33.39×104），八种煤的水煤浆成浆性随着分子量的增大而增加，水煤浆成浆性与PSS添加剂的平均分子量的关系可归因于添加剂在煤粒上的吸附，分子量小的PSS在煤粒上的吸附量大于分子量大的PSS；PSS分子量的增加有利于水煤浆的流变性由胀性向假塑性转变；PSS分子量的增加使水煤浆的静态稳定性得到显著的改善。     

甲基丙烯酸甲酯聚合动力学和分子量及分布的开放控制

在甲基丙烯酸甲酯聚合过程中 ,凝胶效应会导致转化率在短时间内出现突变 ,这对工业反应器非常危险 ,同时也导致分子量剧增、分子量分布加宽 .为了使聚合反应速度、分子量及分布同时得到控制 ,提出 3个控制目标 ,即热荷分布指数、预定分子量及变化、分子量分布指数 .在甲基丙烯酸甲酯半间歇聚合动力学和分子量模型的基础上 ,通过单体、溶剂和链转移剂 3种物料的流量和加料方式的仿真计算 ,对动力学、分子量及分布进行开放控制 ,并进行优化 ,得到热荷分布指数和分子量分布指数分别小于 2 0和 2 2的控制策略 ,且分子量达到预定要求 .选择两种优化策略进行实验验证 ,结果与开放控制仿真结果一致     

Valency and molecular structure

Valency is defined for each molecular orbital. The molecular orbital valency values are shown to be a good measure of the bonding nature of the molecular orbital. Comparisons are made with photoelectron spectral studies and Mulliken overlap population analysis.The variation of molecular valency and molecular orbital valency with bond angle is studied. It is found that for all the molecules presently considered, energy is linearly related to valency and that the molecular valency reaches a maximum at the equilibrium bond angle. It is also shown that the molecular orbital valency can serve as a quantitatively reliable ordinate for Mulliken-Walsh diagrams.     

DNA‐Nanotechnologie

For the past two decades the extraordinary molecular recognition properties of DNA molecules have been used for the creation of artificial molecular structures. Following the initial production of simple molecular objects and lattices, with the recent invention of the DNA origami technique the complexity of these structures has considerably increased. Now the construction of almost arbitrary molecular nanostructures from DNA in two and even three dimensions is feasible – and first concrete applications in biomedicine and nanotechnology are in reach. In addition to static molecular structures, also dynamical systems such as molecular machines, molecular motors, and molecular computers can be realized. The combination of these functions within integrated systems currently leads to the development of first molecular “robots” and assembly lines for nanotechnology.     

Determination of molecular mass of acidic polysaccharides by capillary electrophoresis

We developed a method for the determination of molecular mass of acidic polysaccharides based on their high-resolution separation by capillary electrophoresis. Polymers of N-acetylneuraminic acid (NeuAc) and polysulfated hyaluronic acid were separated into their molecular species up to 100 mono- and 20 disaccharide units, respectively. The relationship between the molecular mass of NeuAc-polymer and their electrophoretic mobilities showed good linearity, and was applied to the determination of molecular masses of larger NeuAc species unresolved by capillary electrophoresis under the same conditions. In the first step, the standard curve for the determination of molecular mass was constructed from the relationship between electrophoretic mobility and molecular mass. Subsequently, the mobility was extrapolated to the standard curve, and the molecular mass was calculated. Five different preparations of NeuAc polymers having different molecular masses showed smaller values than those determined by conventional chromatographic techniques. Further, molecular mass determined by the present method correlated with number-average molecular mass. The methodology presented here was applied to the determination of molecular mass of polysulfated hyaluronic acid. The data indicated that native hyaluronic acid was extensively degraded during sulfonation reaction.