Raman spectroscopic studies on surface coordination mechanism of benzotriazole and triphenylphosphine with metals

The complexes of benzotriazole (BTAH) with Ag, Cu, Fe, Zn and Ni were prepared respectively in the non-aqueous solution by the direct electrochemical synthesis and characterized by microanalysis and normal Raman spectroscopy. The influence of the neutral ligand of triphenylphosphine (pph₃) on the coordination process was deduced by the normal Raman spectroscopy and electrochemistry. The metals were classified into two categories. For the first type, such as Cu and Ag, CuBTA and AgBTA were obtained in the solution without pph₃. The introduction of pph₃ led to its participation in the coordination processes of BTAH with Cu or Ag and appeared in the final complex. Fe, Zn and Ni belonged to the second type, there was no influence on the coordination of BTAH with Zn, Ni and Fe, i.e., the final complexes were Fe(BTA)₂, Zn(BTA)₂ and Ni(BTA)₂, respectively, in the solution with/without pph₃. The electrochemical results revealed that the BTAH can inhibit the corrosion of all the above metals, and the introduction of pph₃ resulted in the decrease of inhibition efficiency to Cu surface, while no influence was observed on the Ni surface. The different role of pph₃ was explained in terms of hard/soft acids and bases rule and coordination mechanism was proposed.     

非水体系中苯并三唑在铜电极上吸附的电化学表面增强拉曼光谱研究

采用电化学现场表面增强拉曼光谱(SERS)研究了非水体系中苯并三唑(BTAH)在铜电极上的吸附及成膜行为, 结果表明非水体系中BTAH的吸附行为随电位变化而不同. 较负电位区间主要以中性分子形式吸附; 中间电位区间主要以BTA^－吸附并不可逆成膜; 而在氧化电位区间主要表现为铜的氧化. 随中性配体三苯基膦(pph₃)的加入, 在中间电位区间, 由于易溶的Cu(pph₃)_n⁺的生成而使铜的溶解速度加快, 最终该阳离子在溶液中和BTA^-作用而生成了多核铜的配合物. 采用直接电化学方法模拟电极表面过程合成了相应的吸附产物, 并对其组成进行了相关表征.     

Spectroelectrochemical study of the corrosion of a copper electrode in deaerated 1.0 M HCl solutions containing Fe(III): Effect of the corrosion inhibitor benzotriazole

The corrosion rate of a copper electrode in deaerated 1.0 M HCl by Fe(III) ions, in the absence and presence of benzotriazole (BTAH), has been evaluated through weight-loss experiments using a rotating disk electrode (RDE). The corrosion process is controlled by transport of the Fe(III) ions to the electrode surface both in the absence and presence of BTAH. The inhibiting action is initiated at BTAH concentrations around 10 mM and the Langmuir adsorption isotherm is obeyed in the BTAH concentration range from 10 to 45 mM with an apparent equilibrium adsorption constant of 10 M⁻¹. Above this concentration, the Langmuir plot is not obeyed due to the formation of a multilayer. The surface films formed during the corrosion process have been investigated by “in situ” and “ex situ” fluorescence and Raman spectroscopy and characterized as being composed of the polymeric [Cu(I)BTA] complex and [Cu(I)CIBTAH]₄, the former as an inner layer response for the corrosion inhibition process.     

Solubility of ferrocyanides and ferricyanides in sodium pyrophosphate

1. Prussian blue and the ferrocyanides of Cu, Cd, Zn, Ni, Co, Mn, UO₂ are dissolved by sodium pyrophosphate. Na₄[Fe(CN)₆] and the water soluble double sodium pylophosphates of the afore mentioned metals are formed. 2. The Ferricyanides of Cu, Cd, Zn, Ni, Co, react with sodiun pyrophospate forming Na₃[Fe(CN)₆] and the water soluble sodium double pyrophosphates of the aforementioned metals.     

Consecutive thin-layer chromatographic separation of Au(III), Pt(IV), Pd(II) and large amounts of associated base metals

Summary The TLC system composed of ECTEOLA-cellulose and 2.5 mol/l HCl–2.5 mol/l NaCl–0.6% (w/v) H₂O₂ solution allows consecutive separations of Au(III), Pt(IV), Pd(II) and a number of associated base metals such as Cr(III), Mn(II), Fe(III), Co(II) Ni(II), Cu(II), Mg, Ca, Ba, Al, Bi(III), Pb(II), Zn(II) and Ag(I) coexisting in an extremely wide range of amounts and ratios, to be conducted completely in a single run. The effectiveness of the present system is verified by applying it to various synthesized samples containing the three noble metals and one of the base metals, Pt-metal powder and two kinds of Au-alloys.     

A selective chemosensor for detection of Ag(I) and Cu(I) based on an acenaphthoquinone derivative and its complexes

A new Schiff base, acenaphthoquinone bis(diphenylmethlenehydrazone) (L), was synthesized and employed as a chemosensor for detecting Ag(I) and Cu(I). Experimental results showed that the chemosensor exhibited high selectivity and sensitivity. The sensitivity of the chemosensor for Ag(I) or Cu(I) was not affected by other metal ions, such as Ni(II), Nd(III), Zn(II), Fe(III), Cu(II), Na(I), La(III), K(I), and Co(II). Complexes 1 and 2 were synthesized by coordination of L with Ag(I) and Cu(I), respectively. The crystal structures of 1 and 2 were determined by single-crystal X-ray diffraction. They had the same space group P2₁/c. Based on theoretical calculation, mechanism of the chemosensor detecting Ag(I) and Cu(I) was suggested.     

Far infrared studies on stannite and wurtzstannite type compounds

Far-infrared and Raman spectroscopic studies were performed on compounds of composition A₂BCX₄ (A = Cu, Ag; B = Zn, Cd, Hg, Mn, Fe, Co; C = Si,     

Catalytic effects of peroxidase-like metalloporphyrins on the fluorescence reaction of homovanillic acid with hydrogen peroxide

Summary The catalytic effects of peroxidase-like metalloporphyrins (Me-P) on the fluorescence reaction of homovanillic acid with hydrogen peroxide have been studied. These metalloporphyrins are the complexes of Mn with tetrakis(carboxyphenyl)porphyrin (TPPC) and trikis(sulfophenyl)porphyrin(TPPS₃), Fe, Co, Ni, Cu, Zn, Ag and Sn with tetrakis(sulfophenyl)porphyrin(TPPS₄), and Rh, Pt and Pd with tetrakis(N-methylpyridiniumyl)porphyrin-(TMPyP) and hemin. The complexes of Mn, Fe, Co, Rh and Pt with porphyrins catalyzed the formation of the fluorescence product, while the complexes of Ni, Cu, Zn, Ag, Sn and Pd did not. Traces of hydrogen peroxide and glucose can be determined using the metalloporphyrins. The characteristics of peroxidase-like metalloporphyrins have been compared with those of horseradish peroxidase (HRP).     

卟啉化合物电化学性质研究 Ⅰ.5,10,15,20-四-(4-乙酰氧基苯)卟吩及其Cu、Zn、Fe、Co、Ni配合物的合成及循环伏安研究

本文报道了５，１０，１５，２０－四（４－乙酰氧基苯）卟吩（Ｔ（４ＡＯＰ）Ｐ）及其Ｃｕ，Ｚｎ，Ｆｅ，Ｃｏ，Ｎｉ配合物的合成及其在ＣＨ２Ｃｌ２－０．１ｍｏｌ／ＩＴＢＡＰ体系中的循环伏安（ＣＶ）。研究结果。ＣＶ实验表明：Ｃｕ＾２＾＋，Ｚｎ＾２＾＝，Ｎｉ＾２＾＋离子以稳定的＋２价存在于Ｔ（４ＡＯＰ）Ｐ中，电子转移反应在卟啉环上进行，而Ｆｅ＾３＾＋，Ｃｏ＾２＾＋离子在氧化还原过程中发生价态变化。实验发现...     

Determination of trace metals in Nile River and ground water by differential pulse stripping voltammetry

The determination of trace metals in river water and ground water by DPSV is seriously disturbed by the presence of organic complexes. The influence of these substances can be eliminated by acidification of the samples with acids. Cd, Pb and Cu were determined at pH 1.1 (HNO₃ medium) and Zn, Cd, Pb and Cu at pH 2 (HCl medium), in both the Nile river and ground water. Zn was determined at pH 3.5 in HCl and pH 4.5 in HNO₃, after neutralizing the samples with NH₃/NH₄Cl buffer. Manganese could then be determined, after further addition of ammoniacal buffer solution up to pH 7.5 and 8.5. Ni and Co were determined in the adsorptive mode after formation of dimethylglyoximates at pH 9.2. The effect of pH on the stripping peaks of manganese was studied. Good agreement was observed between DPSV and AAS results for Zn, Cd, Pb, Cu and Mn, but the concentrations of Ni and Co were below the detection limits for AAS. Good agreement was obtained between DPSV results in HCl and HNO₃ for Ni and Co. The results indicate that decomposition of organic complexes by acidification with HNO₃ is better than in the case with HCl for Zn, Pb, Cu, Ni and Co, but HCl is better than HNO₃ for Cd and Mn.     

Anreicherung und spektrochemische Bestimmung von Spurenelementen in reinsten Thalliumpr?paraten

Zusammenfassung Zur Anreicherung von Spurenelementen aus Lösungen reinster Thalliumpräparate wird die Matrix Thallium als TlJ ausgefällt. Dabei bleiben die Spuren Mg, Zn, Al, Ga, In, Fe, Co, Ni, Mn, Sn, La, Ce, Th und U quantitativ in Lösung, während Bi, Cu, Pb und Cd sowie die Edelmetalle Ag, Hg, Pd, Au und Pt vom Niederschlag mitgerissen werden. Die Adsorption der für die Reinheitsprüfung des Thalliums wichtigen Elemente Bi, Cu, Pb und Cd kann verhindert werden, wenn sie mit Hilfe von ÄDTA in Komplexanionen übergeführt werden. Als Fällungsmittel wird NaJ verwendet. Zur spektrochemischen Bestimmung werden Pb, Cd, Bi, Ni, Co und In als DDTC-Komplexe mit Chloroform extrahiert. Nach Zusatz einer Mischung von Lithiumcarbonat-Kohle und den Referenzelementen Sn und Pd wird der Eindampfrückstand im Gleichstrombogen analysiert. Cu und Fe werden photometrisch bestimmt.

---

Enrichment and spectrochemical determination of trace elements in high-purity thallium preparations

For the enrichment of trace elements in solutions of high-purity thallium samples, thallium is precipitated in form of TlI. In this process the noble metals Ag, Hg, Pd, Au, Pt and also Bi, Cu, Pb and Cd will be co-precipitated, whereas many other elements (Mg, Zn, Al, Ga, In, Fe, Co, Ni, Mn, Sn, La, Ce, Th, U) will remain completely in solution. The adsorption of the four elements Bi, Cu, Pb, Cd, which are important for the purity control of thallium compounds, can be prevented, if they are complexed with EDTA to form complex anions. The precipitating reagent is NaI. For the spectrochemical determination of Pb, Cd, Bi, Ni, Co, and In, the trace elements are extracted as DDTC complexes with chloroform. After the addition of a mixture of Li₂CO₃, carbon, and the reference elements Sn and Pd, the sample is analysed, using the d.c. arc. Cu and Fe are determined spectrophotometrically.

---

---

Wir danken dem Fonds der chemischen Industrie für die finanzielle Unterstützung dieser Arbeit.     

Raman-spektroskopische Untersuchungen an Metall-dicyanamiden

Raman Spectroscopic Investigations of Metal Dicyanamides The Raman spectra of 3d metal dicyanamides M{N(CN)₂}₂ (M ? Mn, Fe, Co, Ni, Cu, Zn) and some pyridine complexes [M{N(CN)₂}₂py₂] are investigated. Characteristic variations of these frequencies depending on different parameters are discussed.     

Electron spectroscopic studies of the adsorption and decomposition of methanol on transition metals. A review

Results of investigations of the adsorption and decomposition of methanol on the surface of transition metals such as Fe, Ni, Cu, Pd, Ag, Mo, W and Pt byuv and x-ray photoelectron spectroscopy, electron energy loss spectroscopy, Auger electron spectroscopy and thermal desorption spectroscopy have been reviewed. The first step in the decomposition of CH₃OH on these metal surfaces is the formation of the methoxy species, OCH₃ radical. In the case of Fe, Mo and W, complete decomposition of CH₃OH occurs leaving CO(β), H₂ and CH₄ on the surface. Dissociation proceeds upto CO(α) and H₂ on the surface of Ni, Pd and Pt whereas on Ag and Cu, selective oxidation of CH₃OH to H₂CO is preferred. The difference in the reactivity of metals towards CH₃OH is rationalised from the heats of adsorption of O₂, CO and H₂ on these metals. Contribution No. 253 from the Solid State and Structural Chemistry Unit.     

4′-(2-Methylphenyl)-2,2′:6′,2″-terpyridine: coordination chemistry with Ni(II), Cu(II), Zn(II) and Ag(I)

The synthesis of 4′-(2-methylphenyl)-2,2′:6′,2″-terpyridine (L) has been improved. The coordination chemistry of the ligand was explored using Ni(II), Cu(II), Zn(II), and Ag(I) ions. X-ray crystallography, elemental analysis, NMR, and mass spectrometry were used to characterize the 13 new compounds that have been synthesized. Under different reaction conditions, Ni(II), Cu(II), and Zn(II) produced discrete complexes, sometimes containing more than one metal ion, while Ag(I) furnished a polymeric spiral complex in which the central pyridine nitrogen of each terpyridine ligand bridges two Ag(I) ions. Crystallographically characterized complexes are [Ni(L)₂]Cl₂, [Ni₂Cl₄(L)₂], [Ni(L)(OH₂)₃]Cl₂, [Ni(L)₂]Br₂, [Cu(L)(OH₂)(OSO₃)], [Cu₃Cl₆(L)₂], [Cu(L)(OH)(OH₂)₂]PF₆, [Cu(L)₂](OTf)₂, [Cu(L)(OAc)₂], [Zn(L)(OAc)₂], [Zn(L)Cl₂], [Zn(L)₂](NO₃)₂, [{Ag₂(μ-L)₂(μ-NO₃)}_n](NO₃)_n.     

Surface enhanced Raman spectra of benzotriazole adsorbed on a copper electrode

The surface enhanced Raman spectrum of benzotriazole (BTAH) adsorbed on a copper electrode has been studied as a function of the potential applied to the electrode. The effect of pH and of the type of halide in the electrolyte solution has also been investigated. The presence of some complexes involving Cu(I), benzotriazole or benzotriazolate (BTA^-) and the halide has been characterized. The protective film formed on copper surface, in the presence of benzotriazole, has been identified as cuprous benzotriazolate [Cu(I)BTA].     

Trace metal accumulation in tissues of sole (Solea senegalensis) and the relationships with the abiotic environment

The distribution patterns and the organ-specific accumulation trends of 10 trace metals (iron, manganese, zinc, copper, chromium, nickel, cobalt, lead, cadmium and silver) and 4 major elements (sodium, potassium, calcium and magnesium) in 10 different tissues (heart, muscle, kidney, stomach, intestine, liver, gill, gonads, white skin and dark skin) of a benthic fish species (Solea senegalensis) from a densely populated coastal area affected by anthropogenic activities, the Bay of Cadiz (SW Spain), have been investigated. High variability of metal concentrations among tissues were found for Ca, Fe, Zn, Cu, Pb and Ag. Factor analysis was applied to study this variability. Five principal components were found explaining the 92.95% of the total variance and similarities in behavioural patterns of bioaccumulation were described. They associated Mg, Cr, Ni and Mn to intestine and stomach tissues (PC1), Ag, Cu and Cd to liver (PC2), Zn, K and Co to gonads (PC3), Na, Fe and Pb to gill, heart and kidney tissues (PC4) and Ca, Pb and Mn to gill and dark skin (PC5). The metallic concentration in the sediment and water was also studied. The pollution in this area was found moderate with outstanding values of Zn, Cu and Pb (average values of 139, 50.4 and 75.6?mg?kg^?1, respectively) in sediment and dissolved Cu (average value of 2.5?µg?L^?1). Metal bioconcentration trends followed the order Zn?>?Cu?>?Cd?>?Pb for dissolved metals in seawater, Cu?>?Zn?>?Cd?>?Pb?≈?Mn?>?Fe?≈?Ni?≈?Co for metals associated to particulate matter and Zn?≈?Cu?>?Cd?>?Mn?>?Co?≈?Fe?>?Ni?≈?Pb?>?Cr for metals in the sediment. Higher values were found for copper in liver, zinc in gonads and lead in gill, showing the relationship between biotic and abiotic environment. In addition, Cd bioconcentration factors were found high in liver and gill showing the sensitivity of sole to this metal even at low concentrations.     

Anreicherung von elementspuren aus hochreinem gallium durch partielles lösen der matrix : Analyse des spurenkonzentrats durch flammen-atomabsorptions-spektrometrie mit der “injektionsmethode”

Trace elements can be preconcentrated from high-purity gallium by simple dissolution of the sample in HCl—HNO₃, until a residue of less than 5 mg remains. Traces of metals which are nobler electrochemically than the matrix (Ag, Au, Bi, Co, Cu, Fe, Hg, Ni, Pb, Pd and Sn) are enriched in the residue (recovery > 95 %), a concentration factor of about 10³ being obtained. Traces of Cd, Co, Fe, Tl and Zn can be extracted from gallium without dissolving the matrix by treatment with a mixture of HI and I₂. Most of the preconcentrated elements are determined by flame atomic absorption spectrometry with the “injection method”. The limit of detection (3σ) for different elements was found to be between 0.06 and 0.004 p.p.m. The relative standard deviation is generally about 5 %.     

Thermal decomposition of bivalent transition metal malonates in various atmospheres

The thermal decomposition of the malonates of bivalent transition metals (Mn, Fe, Co, Ni, Cu and Zn) was investigated by mainly TG-DTA, X-ray diffraction analysis and evolved gas analysis in atmospheres of N₂, CO₂ and O₂ and in the air. It was shown that CO₂ has an inhibiting effect on the decomposition whereas O₂ and air have the accelerating effects on the basis of N₂. The decomposition of the salts investigated can be classified into three groups from solid decomposition products: Mn and Zn malonates gave the metal oxides including 1–1.5 moles of elementary carbon, while Cu and Ni malonates gave the metals with 1–1.5 moles of the carbon. Fe and Co malonates in the last group gave once the metal oxides with 1-0.5 moles of the carbon and the oxides produced were subsequently reduced to the metals by the carbon. A possible reaction mechanism for the malonates was discussed and compared with those of the corresponding oxalates and succinates.     

Structural properties of some liquid transition metals

This article addresses the computation of structural properties of liquid transition metals, namely, 3d (Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn), 4d (Zr, Pd, Ag and Cd) and 5d (Pt, Au and Hg). We have calculated the structure factor S(q), pair distribution function g(r), interatomic distance r ₁, coordination number n ₁, long wavelength limit of structure factor S(0) and isothermal compressibility χ_T for liquid transition metals. To describe electron–ion interaction, we have used our own model potential along with one component plasma reference system. To see the influence of exchange and correlation effect, Sarkar et al.'s [Mod. Phys. Lett. B12, 639 (1998)] local field correlation function is used. Thus, our newly constructed model potential has successfully generated the structural properties (structure factor S(q), pair distribution function g(r), interatomic distance r ₁, coordination number n ₁, long wavelength limit of structure factor S(0) and isothermal compressibility χ_T ) for liquid transition metals.     

Adsorption and protecting properties of 1,2,3-benzotriazole on MNZh 5-1 alloy in neutral solutions

1,2,3-Benzotriazole (BTA) stabilizes the passive state of the MNZh 5-1 alloy in a chloride borate buffer with pH 7.40 at c _BTA = 0.5 mM, which is lower than for the metal components of the alloy. The adsorption of BTA on the surface of MNZh 5-1 is polymolecular. The free energy of adsorption ?ΔG _a ⁰ for monolayer BTA coverage of the alloy was higher than for the alloy component metals (Fe, Ni, Cu).