Detection of CD4~+ T-lymphocytes from hemodialyzed patients by surface plasmon resonance

A surface plasmon resonance(SPR) method was presented to discriminate hemodialyzed T-lymphocytes from the normal based on antibody-cell recognition.By dynamic reaction with fixed anti-human CD4 antibody,SPR could offer significant signals to distinguish hemodialyzed patients from the healthy controls within 200 s after the cell injection in respect of either rising speed or maximum binding capacity(p < 0.01).The ratio method is also used to exclude the non-specific adsorption.The percentage of hemodialyzed patients’ CD4~+ T cells against the healthy control is 69±18%.The most attractive of the present method is its ability to detect the intact and label-free lymphocytes,and further to detect the subpopulations,or proteins secreted by the desired lymphocytes subset.     

Enhanced surface plasmon resonance immunoassay for human complement factor 4

Using an enhanced surface plasmon resonance (SPR) immunosensor, we have determined the concentration of human complement factor 4 (C4). Antibody protein was concentrated into a carboxymethyldextran-modified gold surface by electrostatic attraction force and a simultaneous covalent immobilization of antibody based on amine coupling reaction took place. The sandwich method was applied to enhance the response signal and the specificity of antigen binding assay. The antibody immobilized surface had good response to C4 in the range of 0.02-20 μg/ml by this enhanced immunoassay. The regeneration effect by pH 2 glycine-HCl buffer was also investigated. The same antibody immobilized surface could be used more than 80 cycles of C4 binding and regeneration. In addition, the ability to determinate C4 directly from serum sample without any purification was investigated. The sensitivity, specificity and reproducibility of the enhanced immunoassay are satisfactory. The results clearly demonstrate the advantages of the enhanced SPR technique for C4 immunoassay.     

Monitoring of troponin release from cardiomyocytes during exposure to toxic substances using surface plasmon resonance biosensing

Troponin T (TnT) is a useful biomarker for studying drug-induced toxicity effects on cardiac cells. We describe how a surface plasmon resonance (SPR) biosensor was applied to monitor the release of TnT from active HL-1 cardiomyocytes in vitro when exposed to cardiotoxic substances. Two monoclonal human TnT antibodies were compared in the SPR immunosensor to analyse the TnT release. The detection limit of TnT was determined to be 30 ng/ml in a direct assay set-up and to be 10 ng/ml in a sandwich assay format. Exposure of the cardiomyocytes to doxorubicin, troglitazone, quinidine and cobalt chloride for periods of 6 and 24 h gave significant SPR responses, whereas substances with low toxicity showed insignificant effects (ascorbic acid, methotrexate). The SPR results were verified with a validated immunochemiluminescence method which showed a correlation of r ² = 0.790.     

Quantitation of intracellular recombinant human superoxide dismutase using surface plasmon resonance

An immunosensor assay for the quantitation of intracellular recombinant human superoxide dismutase (rhSOD) in Escherichia coli cultivations based on detection with surface plasmon resoance (SPR) is described. A monoclonal antibody for rhSOD was immobilized on a SPR dextran gold chip. Bacterial samples were sonicated and centrifugated prior to injection over the antibody chip for SPR detection. The assay time was 7 min and allowed quantitation in the range of 1-64 nM SOD in lysate samples with a precision of 1.1-3.4%. The assay was applied to monitor the concentration of rhSOD during E. coli bioreactor cultivations where the rhSOD production was induced by iso-propyl-b-d-thiogalactoside (IPTG). The assay allowed accurate monitoring of the production of rhSOD where the important phases in the product formation were possible to see. The report also discusses influence from sample preparation, SPR selectivity and sensitivity and quantitation limits. The assay proved to be fast, sensitive and accurate with low background effects from the dextran matrix of the SPR chip.     

Sensing using localised surface plasmon resonance sensors

The bright colours of noble metal particles have attracted considerable interest since historical times, where they were used as decorative pigments in stained glass windows. More recently, the tuneable optical properties of metal nanoparticles and their addressability via spectroscopic techniques have brought them back into the forefront of fundamental and applied research fields. Much of the recent attention concerning metal nanoparticles such as gold and silver has been their use as small-volume, ultra-sensitive label-free optical sensors. Plasmonic nanoparticles act in this case as transducers that convert changes in the local refractive index into spectral shifts of the localized surface plasmon resonance (LSPR) band. This LSPR-shift assay is a general technique for measuring binding affinities and rates from any molecule that induces a change in the local refractive index around the metallic nanostructures. By attaching molecular recognition elements (chemical or biological ligands) on the nanostructures, specificity and selectivity to the analyte of interest are introduced into the nanosensor. In this review, we will discuss the different methods used to fabricate plasmonic nanosensors. A special emphasis will be given to techniques used to link plasmonic nanostructures to surfaces. While the difference between colorimetric and refractive index sensing approaches will be briefly described, the importance to distinguish between bulk refractive index (RI) sensing and molecular near-field refractive index sensing will be discussed. The recent progress made in the development of novel surface functionalization strategies together with the formation of optically and mechanically stable LSPR sensors will be highlighted.     

Rapid analysis of coumarins using surface plasmon resonance

Coumarin molecules are ubiquitous in nature. Several have come to prominence as potential clinical therapeutic candidates. The principal example is warfarin, which is a very widely prescribed anticoagulant. Other coumarin derivatives, such as aflatoxin B1, are insidious contaminants in crop-derived foodstuffs. Extreme potency is a common feature of all biochemically active coumarins and, thus reliable methods for their rapid and sensitive detection are of paramount importance. Accordingly, this review examines the current methods used in the analysis of these molecules and compares them with immunoassay-based strategies. As a case study, we report on our experiences with using coumarin-specific polyclonal, monoclonal, and recombinant antibodies in conjunction with a surface plasmon resonance-based biosensor for analysis of coumarins. We chart the assay development process and demonstrate high sensitivity and reproducibility that compares favorably with established methodologies.     

Biological sensing using transmission surface plasmon resonance spectroscopy

Ultrathin gold island films evaporated on transparent substrates offer promising transducers for chemical and biological sensing in the transmission surface plasmon resonance (T-SPR) mode. In the present work, the applicability of T-SPR-based systems to biosensing is demonstrated, using a well-established biological model system. Au island films were evaporated on polystyrene slides and modified with a biotinylated monolayer via a multistep surface reaction, the latter assisted by the good adhesion of metal islands to polystyrene. The biotin-derivatized Au island film was then used as a biological recognition surface for selective sensing of avidin binding, distinguishing between specific and nonspecific binding to the substrate. Transduction of the binding event into an optical signal was achieved by T-SPR spectroscopy, using plasmon intensity measurements, rather than wavelength change, for maximal sensitivity and convenience. T-SPR spectroscopy of Au island films is shown to be an effective tool for monitoring the binding of biological molecules to receptor layers on the Au surface and a promising approach to label-free optical biosensing.     

Development of an X-ray detector using surface plasmon resonance

A new X-ray detector using surface plasmon resonance (SPR) is proposed. The detector consists of a prism coated with a thin metal film and semiconductor film. Optical laser pulse induces SPR condition on the metal surface, and synchronized X-ray pulse which is absorbed into the semiconductor film can be detected by measuring the change of the resonance condition of the surface plasmon. The expected time and spatial resolution of this detector is better than that of conventional X-ray detectors by combining this SPR measurement with ultra-short laser pulse as the probe beam. Our preliminary investigation using Au and ZnSe coated prism implies this scheme works well as the detector for the ultra-short X-ray pulse.     

Real-time immunoassay of ferritin using surface plasmon resonance biosensor

A surface plasmon resonance (SPR) biosensor was used for the first time to determine the concentration of ferritin in both HBS-EP buffer and serum. The monoclonal antibody was immobilized on the carboxymethyl dextran-modified gold surface by an amine coupling method. The interaction of antibody with antigen was monitored in real-time. The signal was enhanced by sandwich amplification strategy to improve the sensitivity and specificity of the immunoassay, especially in serum. The linear range of the assay in serum is over 30-200 ng ml⁻¹ with the detection limit of 28 ng ml⁻¹. The sensitivity, specificity, and reproducibility of the assay are satisfactory. The analyte and enhancement antibody-binding surface could be regenerated by pH 2.0 glycine-HCl buffer and the same antibody-immobilized surface could be used for more than 50 cycles of ferritin binding and regeneration.     

Sensitive detection of tuberculosis using nanoparticle-enhanced surface plasmon resonance

We show that the antigen CFP-10 (found in tissue fluids of tuberculosis patients) can be used as a marker protein in a surface-plasmon resonance (SPR) based method for early and simplified diagnosis of tuberculosis. A sandwich SPR immunosensor was constructed by immobilizing the CFP-10 antibody on a self-assembled monolayer on a gold surface, this followed by blocking it with bovine serum albumin. Following exposure of the sensor surface to a sample containing CFP-10, secondary antibody immobilized on nickel oxide nanoparticles are injected which causes a large SPR signal change. The method has a dynamic range from 0.1 to around 150 ng per mL of CFP-10, and a detection limit as low as 0.1 ng per mL. This is assumed to be due to the high amplification power of the NiO nanoparticles.

Immobilization of Escherichia coli for detection of phage T4 using surface plasmon resonance

Phage contamination is a very serious and unavoidable problem in modern fermentation industry.It is necessary to develop sensitive and rapid phage detection methods for the early detection of phage contamination.In the present work,a real-time,rapid,specific and quantitative phage T4 detection method based on surface plasmon resonance(SPR) technique has been introduced.Escherichia coli was immobilized onto the preformed MPA self-assembled monolayer(SAM) through the widely used EDC/NHS cross-linking reaction as the recognition element.The bacteria immobilization was verified efficiently through the electrochemical measurements and fluorescence microscopy observations.The specific adsorption was much stronger than the non-specific adsorption of phage T4 binding to the biosensor surface modified by E.coli,and the latter could be neglected.The detection sensitivity reached 1×10 7 PFU/mL within 10 min.Within the experimental phage concentrations,the linear correlation between the SPR response and the phage concentration was good.The results suggest that the SPR technique is a potentially powerful tool for the phage or other virus detections,as a label-free,real-time,and rapid method.     

Chemically immobilized T4-bacteriophage for specific Escherichia coli detection using surface plasmon resonance

A bioassay platform using T4 bacteriophage (T4) as the specific receptor and surface plasmon resonance (SPR) as the transduction technique has been developed for the detection of Escherichia coli K12 bacteria. The T4 phages have been covalently immobilized onto gold surfaces using a self-assembled monolayer of dithiobis(succinimidyl propionate) (DTSP). Substrates of BSA/EA-T4/DTSP/Au prepared using different T4 phage concentrations have been characterized using scanning electron microscopy (SEM). The studies reveal that the use of DTSP results in a uniform binding of T4 phages onto the surface. The SPR analysis demonstrates that these BSA/EA-T4/DTSP/Au interfaces can detect the E. coli K12 with high specificity against non-host E. coli NP10 and NP30. Results of SEM and SPR studies indicate that the maximum host bacterial capture is obtained when 1.5 × 10(11) pfu ml(-1) concentration of T4 phages was used for immobilization. The surface of these chemically anchored phage substrates can be regenerated for repeated detection of E. coli K12 and can be used for detection in 7 × 10(2) to 7 × 10(8) cfu ml(-1) range. The results of these studies have implications for the development of online bioassays for the detection of various food and water borne pathogens using the inherent selectivity of bacteriophage recognition.     

Detection of lectin-glycan interaction using high resolution surface plasmon resonance

We report the real-time and label-free detection of direct disaccharide binding to a lectin using a differential surface plasmon resonance detection method that allows for measurement of nanomolar concentrations of disaccharides.     

Enhanced surface plasmon resonance immunosensing using a streptavidin-biotinylated protein complex

In this paper, we present a novel strategy for improving the sensitivity of surface plasmon resonance immunosensing using a streptavidin-biotinylated protein complex. This amplification strategy is based on the construction of a molecular complex between streptavidin and biotin labeled protein. The complex can be formed in a cross-linking network of molecules so that the amplification of the response signal will be realized due to the big molecular size of the complex. The results show that the amplification strategy causes a dramatic improvement of the detection sensitivity. hIgG protein could be detected in the range of 0.005-10 micrograms ml-1.     

Detection of ozone gas using gold nanoislands and surface plasmon resonance

Gold nanoislands interact with gaseous ozone to produce a surface plasmon resonance shift, similarly to the interaction of ozone and gold nanoparticles in water. Gold nanoislands are produced by sputtering, which significantly simplifies the synthesis and produces controlled size for the gold nanoislands. The shift of surface plasmon resonance peak was monitored while gold nanoislands were exposed to variable concentration of gaseous ozone. The shift was then correlated with ozone concentration. Our current results indicate sensing gaseous ozone at concentration of as low as 20 μg/L is achievable. Gold nanoislands were reversed to their original wavelength and were able to cycle between the wavelengths as ozone was introduced and removed. Potentially, this system can be useful as a sensor that identifies the presence of ozone at low part-per-billion concentrations of ozone in gaseous media.     

Detection of bisphenol A using a novel surface plasmon resonance biosensor

We present a compact surface plasmon resonance (SPR) biosensor for the detection of bisphenol A (BpA), an endocrine-disrupting chemical. The biosensor is based on an SPR sensor platform (SPRCD) and the binding inhibition detection format. The detection of BpA in PBS and wastewater was performed at concentrations ranging from 0.05 to 1,000 ng/ml. The limit of detection for BpA in PBS and wastewater was estimated to be 0.08 and 0.14 ng/ml, respectively. It was also demonstrated that the biosensor can be regenerated for repeated use. Results achieved with the SPR biosensor are compared with those obtained using ELISA and HPLC methods.     

Determining salinity using a multimode fiber optic surface plasmon resonance dip-probe

For the first time a fiber optic surface plasmon resonance sensor with demonstrated accuracy and precision of less than 200 ppm salinity is presented for calibration across a range of temperatures and salinities. Also shown is the potential for the sensor system to reach precisions of 10 ppm or less. Calibration models are constructed for 28-48‰ salinity and a method for translating the calibration models to account for varying temperatures between 0 and 25 °C are demonstrated. The long-term susceptibility of the fiber optic sensor to fouling and drift is discussed.     

Detection of microcystins in environmental samples using surface plasmon resonance biosensor

An indirect inhibitive surface plasmon resonance (SPR) immunoassay was developed for the microcystins (MCs) detection. The bioconjugate of MC-LR and bovine serum albumin (BSA) was immobilized on a CM5 sensor chip. A serial premixture of MC-LR standards (or samples) and monoclonal antibody (mAb) were injected over the functional sensor surface, and the subsequent specific immunoreaction was monitored on the BIAcore 3000 biosensor and generated a signal with an increasing intensity in response to the decreasing MCs concentration. The developed SPR immunoassay has a wide quantitative range in 1-100 μg L⁻¹. Although not as sensitive as conventional enzyme-linked immunosorbent assay (ELISA), the SPR biosensor offered unique advantages: (1) the sensor chip could be reusable without any significant loss in its binding activity after 50 assay-regeneration cycles, (2) one single assay could be accomplished in 50 min (including 30-min preincubation and 20-min BIAcore analysis), and (3) this method did not require multiple steps. The SPR biosensor was also used to detect MCs in environmental samples, and the results compared well with those obtained by ELISA. We conclude that the SPR biosensor offers outstanding advantages for the MCs detection and may be further developed as a field-portable sensor for real-time monitoring of MCs on site in the near future.     

Label-free detection of cancer biomarker candidates using surface plasmon resonance imaging

In this work, we present an antibody array for the detection of cancer biomarker candidates by a surface plasmon resonance (SPR) imaging sensor with polarization contrast. Responses from the SPR imaging sensor are shown to be similar to those from a conventional spectroscopy-based SPR sensor. Antibodies are spotted onto a self-assembled monolayer (SAM) composed of oligo(ethylene glycol) (OEG)-containing alkanethiol chains. Detection of two cancer biomarker candidates, activated leukocyte cell adhesion molecule/CD 166 (ALCAM) and transgelin-2 (TAGLN2), is demonstrated. Limits of detection for ALCAM and TAGLN2 are established at 6 ng/mL and 3 ng/mL, respectively, in buffer. No cross-reactivity is observed between immobilized antibodies and nonspecific antigen. Biomarker candidates are also detected in a 10% human serum solution. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Study of complement activation on well-defined surfaces using surface plasmon resonance

It has been accepted that covalent immobilization of C3b on artificial materials is the most important step to initiate the complement activation. However, there are few studies that have directly demonstrated covalent immobilization of C3b on artificial surfaces. In this study, model thin layers were prepared by the self-assembled monolayer method to produce a surface covered with hydroxyl or methyl groups using mercaptododecane (CH₃-SAM) and mercaptoundecanol (OH-SAM). Interactions of the complement system with the model surfaces were studied using a surface plasmon resonance instrument. The OH-SAM immobilized C3b, resulting in activating of the complement system through the alternative pathway in Veronal-buffered saline, but this surface did not activate the classical pathway. However, the OH-SAM could not activate the alternative pathway in Veronal-buffered saline containing 10 mM EGTA and 2 mM MgCl₂ that is believed not to interfere with the activation of the alternative pathway. The hydrophobic CH₃-SAM surface could not activate the classical pathway, but activated the alternative pathway, although the extent was small.