Core–shell particles with conductive polymer cores

Heterocoagulation of large cationic polypyrrole particles with small anionic polyacrylate beads followed by heat processing of the heterocoagulate units proved to be an efficient method in the preparation of core-shell particles with conductive cores and dielectric shells. Specific conditions required for producing monodispersed composite particles with uniform shells were examined in the stages of the synthesis of polypyrrole particles with controlled size, in "one-step" heterocoagulation of oppositely charged polypyrrole microbeads with small polyacrylic particles, and during shell formation by spreading of the acrylic polymer on the surface of polypyrrole cores.     

AuPt core–shell nanocatalysts with bulk Pt activity

In the presented work, the evaluation of an unsupported AuPt core–shell catalyst for the oxygen reduction reaction is introduced. Applying only basic chemicals in an upscalable synthesis route, it is demonstrated that uniform, flat, and complete Pt layers around a spherical Au core are obtained. The electrocatalytic measurements show that the surface area specific activity of the AuPt core–shell catalyst towards the important oxygen reduction reaction equals the one of polycrystalline bulk Pt. To our knowledge, this is the first time that the unfavorable particle size effect of Pt nanoparticles could be by-passed for a nanoscale catalyst.     

Synthesis of bifunctional core–shell particles with a porous zeolite core and a responsive polymeric shell

The aim of our work is the synthesis and characterization of colloidal core–shell particles with a zeolite core and an environmentally responsive shell. We have synthesized colloidal ZSM-5 zeolite and modified the surface with 3-(trimethoxysilyl)propyl methacrylate in order to introduce double bonds at the surface. The cross-linked polymeric shell was prepared by precipitation polymerization using the functionalized zeolite particles as seeds. We employed thermoresponsive poly(N-isopropylacrylamide) and pH-responsive poly(vinylpyridine) as the polymeric shell, respectively. The temperature- and pH-depending swelling and deswelling of the core–shell particles were characterized with dynamic light scattering techniques. Transmission electron microscopy pictures show the morphology of the synthesized particles. It is proposed that these types of bifunctional core–shell particles could be of use for controlled uptake and release applications and separation of molecules.     

Electrochemical determination of the surface composition of Pd–Pt core–shell nanoparticles

Different amounts of Pt atoms were deposited onto the surface of Pd nanoparticles supported on carbon black by hydroquinone reduction method in anhydrous ethanol. Here, we surveyed electrochemical probing of surface compositions of Pd–Pt surface alloys. They were calculated from hydrogen desorption, carbon monoxide adlayer oxidation, and reduced carbon dioxide oxidation charges. The surface composition of Pt drastically increased up to Pt[0.3]/Pd/C (23.1 at.% of Pt) and then approached that of pure Pt with the moderate rate of increase.     

Synthesis and surface properties of self-crosslinking core–shell acrylic copolymer emulsions containing fluorine/silicone in the shell

Stable emulsions of a core–shell acrylic copolymer (non-crosslinkable V0, and crosslinkable V2, V4, V6, and V8, where the numbers indicate the wt% of crosslinking agent based on the total acrylate monomer content) containing butyl acrylate (BA, 45 wt%), glycidyl methacrylate (GMA, 45 wt%), heptadecafluorodecyl methacrylate (PFA, 10 wt%), and various contents of crosslinking agent (vinyltriethoxysilane, VTES) were synthesized using a three-stage seeded emulsion polymerization process with a small amount of surfactant. The average particle size and viscosity of emulsions increased significantly with increasing VTES content. This study examined the effects of the VTES content on the surface/mechanical properties of self-crosslinked copolymer film samples containing a fixed acrylate monomer content to find the optimum VTES content. XPS showed that the film–air surface of the copolymer samples had a higher fluorine/silicone content than the film–dish interface. The tensile strength/modulus, thermal stability, and two Tgs (α and β Tgs) of the film samples increased significantly with increasing VTES content. The contact angle of the film samples increased with increasing VTES content up to approximately 6 wt%, and then decreased slightly. The optimum VTES content was approximately 6 wt% based on the total acrylate monomer content to obtain a high water/oil repellent coating material (V6) with the highest water/methylene iodide-contact angles (118.2°/81.8°) and lowest surface energy (18.4 mN/m).     

Thermoresponsive submicron-sized core–shell hydrogel particles with encapsulated olive oil

Thermoresponsive submicron-sized core–shell hydrogel particles with incorporated olive oil were synthesised and studied. The microspheres having poly(N-isopropylacrylamide-co-methyl methacrylate) core and poly(N-isopropylacrylamide) shell were synthesised by emulsifier-free seed polymerisation method. The morphology, particle size and distribution characteristics of the core microspheres were studied with different amount of initiator, monomer–solvent ratio and polymerisation time using scanning electron microscopy and dynamic light scattering particle size analysis. The prepared core and core–shell microspheres were regularly spherical with average size of around 190.0 and 320.0 nm respectively and nearly monodispersed size distribution. Transmission electron microscopy study revealed the core–shell structure of the microspheres. The thermoresponsive transition temperature (T _t) of the core–shell microspheres was determined as 33 °C by optical absorbance measurement, dynamic light scattering particle size analysis and differential scanning calorimetry. The release rate of olive oil from core–shell microspheres was accelerated by squeezing out the entrapped olive oil as the temperature was increased above T _t. Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy study indicated the formation of copolymer.     

K shell,L shell–subshell and M shell–subshell photoeffect cross-sections in elements between Tb (Z=65) and U (Z=92) at 123.6 keV

In this paper, we report on measurements of K shell, L shell–subshell and M shell–subshell photoeffect cross-sections for 21 high-atomic-number elements between Tb (Z=65) and U (Z=92) at 123.6 keV. These photoeffect cross-sections have been measured by using our earlier measurements of the K-shell X-ray production cross-sections. The measured photoeffect cross-sections have been compared with calculated theoretical values. It is clear that the results compare well with theoretical values within an experimental average error. At 123.6 keV, these cross-sections have been measured for the first time. The results have been plotted versus atomic number.     

Melamine-assisted pyrolytic synthesis of bifunctional cobalt-based core–shell electrocatalysts for rechargeable zinc–air batteries

Designing a highly active-and stable non-noble metal bifunctional oxygen catalyst for rechargeable Znair battery remains a great challenge. Herein, we develop a facile and melamine-assisted-pyrolysis(MAP)strategy for the synthesis of core–shell Co-based electrocatalysts@N-doped carbon nanotubes(Co@CNTs)derived from metal–organic frameworks. The Co@CNTs exhibited excellent bifunctional electrocatalytic performance for both oxygen evolution and reduction. DFT calculations demonstrated that the Gibbs free energy of the rate-determining step was small enough to improve ORR activities. As a result, a Zn-air battery assembled with Co@CNTs proves a lager power density, low voltage gap between charge–discharge and excellent stability. Thus, this work offers a facile strategy to realize the synthesis of non-noble metal electrocatalyst for Zn-air battery materials with high electrochemical performance.     

Synthesis and characterization of core–shell polyacrylate latex containing fluorine/silicone in the shell and the self-stratification film

A series of core–shell polyacrylate latexes with different fluorine/silicone monomer concentrations were prepared successfully by seeded emulsion polymerization. Dodecafluoroheptyl methacrylate and perfluorooctyl methacrylate with different fluorinated side chains were employed as fluorinated monomers, and γ-methacryloxypropyl triisopropoxidesilane (MAPTIPS) was used as a silicone-containing monomer as well as a self-cross-linking agent. The morphology and chemical structure of the latexes were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, and differential scanning calorimetry, and the self-stratification properties of the latex film were verified by X-ray photoelectron spectroscopy and static contact angle measurement. The results showed that the fluorine/silicone-containing polyacrylate latexes presented a uniformly spherical core–shell structure, and the latex films displayed a preferential distribution of fluorinated composition near the surface, which was more remarkable with the synergism effect between the fluorine monomer and MAPTIPS. Additionally, the hydrophobicity and oleophobicity of the latex films exhibited high relevance with the fluorine/silicone monomer concentrations as well as the fluorinated side-chain structure.     

X-ray imaging of newly-developed gadolinium compound/silica core–shell particles

A preparation method for gadolinium compound (Gd) nanoparticles coated with silica (Gd/SiO₂) is proposed. Gd nanoparticles were prepared with a homogeneous precipitation method at 80 °C using 1.0 × 10⁻³ M Gd(NO₃)₃ and 0.5 M urea in the presence of 1.0 g/L stabilizer. Among stabilizers examined. Sodium n-dodecyl sulfate (SDS) was suitable as the stabilizer for preparing small Gd nanoparticles, and consequently Gd nanoparticles with a size of 46.2 ± 12.4 nm were prepared using the SDS. Silica-coating of the Gd nanoparticles was performed by a St?ber method at room temperature using 0.013 M TEOS and 2.0 × 10⁻³ M NaOH in water/1-propanol solution in the presence of 1.0 × 10⁻³ M Gd nanoparticles, which resulted in production of Gd/SiO₂ particles with an average size of 64.2 ± 14.4 nm. The Gd/SiO₂ particles were surface-modified with 3-aminopropyltrimethoxysilane and succinic anhydride. It was confirmed by measurement of electrophretic light scattering that amino group or carboxyl group was introduced onto the Gd/SiO₂ particles. The gadolinium concentration of 1.0 × 10⁻³ M in the as-prepared colloid solution was increased up to a gadolinium concentration of 0.4 M by centrifugation. The core–shell structure of Gd/SiO₂ particles was undamaged, and the colloid solution was still colloidally stable, even after the concentrating process. The concentrated Gd/SiO₂ colloid solution showed an X-ray image with contrast as high as a commercial Gd complex contrast agent. Internal organs in a mouse could be imaged injecting the concentrated colloid solution into it.     

Synthesis and characterization of amino-functionalized single magnetic core–silica shell composites

The thermal decomposition approach, reverse micro-emulsion system and surface modification technique had been successfully used to synthesis single magnetic core Fe₃O₄@Organic Layer@SiO₂–NH₂ complex microspheres. The magnetization of the magnetic microspheres core could be easily tuned between 28 and 56 emu/g by adjusting the amount of 2-mercaptobarbituric acid. It was found that the Organic Layer to some extent had a protective effect on avoiding Fe₃O₄ being oxidized into Fe₂O₃. Each Fe₃O₄@Organic Layer microsphere could be coated uniformly by about 30 nm of silica shell. The average diameter of the Fe₃O₄@Organic Layer@SiO₂ composites was about 538 nm. The saturation magnetization of the Fe₃O₄@Organic Layer@SiO₂ complex microspheres was 12.5% less than magnetic microspheres cores. The Fe₃O₄@Organic Layer@SiO₂–NH₂ composites possessed a huge application potentiality in specificity enriching and separating biological samples.     

Designing high performance Pt monolayer core–shell electrocatalysts for fuel cells

In proton exchange membrane fuel cells, platinum (Pt) has been the dominant choice for both the cathode and the anode catalysts. The high Pt content and high associated costs particularly at the cathode, and sluggish oxygen reduction reaction (ORR) kinetics and poor stability, remain a challenge. Pt monolayer (ML) catalysts offer a distinctively reduced Pt content while providing considerable possibilities for enhancing their catalytic activity and stability for the ORR. In this opinion, we first review the achievement in active and stable Pt ML on palladium (Pd) nanoparticle catalysts for the ORR. We then describe the mechanisms that rationalize their high activity and durability. Recently, we developed several novel nanostructured cores to further improve the ORR activity and stability by optimizing their surface orientation, composition, and morphology. The results from the Pt ML catalysts significantly impact the research of electrocatalysis and fuel-cell technology, as they demonstrate an exceptionally effective way of design and syntheses of catalysts.     

Eu(III)-modified properties of thermosensitive core–shell microspheres

We successfully prepared PNIPAM-g-P(NIPAM-co-St) (PNNS) core–shell microsphere by an emulsifier-free emulsion polymerization method. When PNNS with a core–shell structure is interacted with Eu(III), Eu(III) mainly bonds to oxygen of the carbonyl groups of PNNS, forming the novel PNNS-Eu(III) complex. It was found that the complex showed thermosensitive and fluorescent properties at one time. Especially, the maximum emission intensity of Eu(III) in the complex at 614 nm is significantly enhanced in comparison with that of pure Eu(III), demonstrating that there exists an efficient intermolecular energy transfer from the polymer ligand to Eu(III) and then the excited Eu(III) generates the enhanced fluorescence. When the weight ratio of Eu(III) and the PNNS is 8 wt%, the enhancement of the emission fluorescence intensity at 614 nm is highest.     

PbO@C core–shell nanocomposites as an anode material of lithium-ion batteries

In this study, the electrochemical performance of PbO@C core–shell nanocomposites as an anode material of lithium-ion batteries was reported. The PbO@C nanocomposites were prepared via the pyrolysis of lead benzoate precursor. Compared to the reported Pb-based anodes, the PbO@C nanocomposites exhibited higher reversible capacity and longer cycling life. A reversible capacity of 170 mAh g^?1 could be maintained after discharging/charging for 50 cycles, which was at least 1.5 times than the previously reported values. The enhanced electrochemical performance was attributed to the presence of carbon shells that could alleviate the large volume-change of Pb particles during the alloying/dealloying process.     

Preparation of thermoresponsive core–shell polymeric microspheres and hollow PNIPAM microgels

A reliable and efficient route for preparing thermoresponsive hollow microgels based on cross-linked poly(N-isopropyl acrylamide) (PNIPAM) was developed. Firstly, monodisperse thermoresponsive core–shell microspheres composed of a P(styrene (St)-co-NIPAM) core and a cross-linked PNIPAM shell were prepared by seeded emulsion polymerization using P(St-co-NIPAM) particles as seeds. The size of the P(St-co-NIPAM) core can be conveniently tuned by different dosages of sodium dodecyl sulfate. The thickness of the cross-linked PNIPAM shell can be controlled by varying the dosage of NIPAM in the preparation of PNIAPM shell. Then, hollow PNIPAM microgels were obtained by simply dissolving the P(St-co-NIPAM) core with tetrahydrofuran. The core–shell microspheres and the hollow microgels were characterized by transmission electron microscopy, dynamic light scattering, atomic force microscopy, and Fourier-transform infrared spectroscopy.     

Fabrication of polymeric micelles with core–shell–corona structure for applications in controlled drug release

Thermo-responsive polymeric micelles of poly (ethylene glycol)-b-poly(2-hydroxyethyl methacrylate-g-lactide)-b-poly(N-isopropylacrylamide) (PEG-P(HEMA-PLA)-PNIPAM) with core–shell–corona structure were fabricated for applications in controlled drug release. The graft copolymer of PEG-P(HEMA-PLA)-PNIPAM was self-assembled into core–shell micelles with a densely PLA core and mixed PEG/PNIPAM shells at 25 °C in aqueous media. By increasing the temperature above the lower critical solution temperature of PNIPAM, these core–shell micelles could be converted into core–shell–corona micelles because of the collapse of PNIPAM block on the PLA core as the inner shell and the soluble PEG block stretching outside as the outer corona. Anticancer drug doxorubicin (DOX) was loaded in the polymeric micelles as a model drug. Compared with polymeric micelles formed by liner PEG-b-PLA-b-PNIPAM triblock copolymer, these polymeric micelles exhibited higher loading capacity, and release of DOX from the polymeric micelles with core–shell–corona structure was well-controlled.     

Preparation of titania hollow particles with independently controlled void size and shell thickness by catalytic templating core–shell polymer particles

Organic/inorganic hybrids were prepared by catalytic hydrolysis and subsequent polycondensation of tetra-n-butyl titanate (TnBT) in shell layers grafted on core particles. The core particles were synthesized by emulsifier-free emulsion polymerization of styrene, N-n-butyl-N-2-methacryloyloxyethyl-N,N-dimethylammonium bromide (C₄DMAEMA), and 2-chloropropionyloxyethyl methacrylate using 2,2′-azobis(2-amidinopropane) dihydrochloride as an initiator. The core diameters were controlled in the range of 70–550 nm by adjusting a C₄DMAEMA feed concentration. The core–shell particles were prepared by surface-initiated activator generated electron transfer–atom transfer radical polymerization of 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA). The sizes of core–shell particles were found to increase monotonically with an increase in a DMAEMA concentration. The hybrid particles were fabricated by adding TnBT into a water/ethanol dispersion of core–shell particles. The amounts of titania deposited increased in proportion to the grafted amounts of poly[2-(N,N-dimethylamino)ethyl methacrylate] on the core particles. The X-ray diffraction measurement revealed that the hollow titania particles obtained by heat treatment of hybrids have an anatase crystallographic phase.     

Controlled preparation of core–shell polystyrene/polypyrrole nanocomposite particles by a swelling–diffusion–interfacial polymerization method

Polystyrene/polypyrrole (PS/PPy) core–shell nanocomposite particles with uniform and tailored morphology have been successfully synthesized using the “naked” PS particulate substrate with the aid of a proposed strategy, the so-called swelling–diffusion–interfacial polymerization method. After initially forming pyrrole-swollen PS particles, diffusion of the monomer toward the aqueous phase was controlled through the addition of hydrochloric acid, eventually leading to its polymerization on the substrate particle surface. This process allows the nanocomposite particles to possess uniform and intact PPy overlayer and affords much more effective control over the structure and morphology of the resultant nanocomposites by simply changing the PS/pyrrole weight ratio or the addition amount of the doping acid. In particular, the nanocomposite particles with a thin, uniform, and intact PPy overlayer and their corresponding PPy hollow particles were obtained at a low addition amount of pyrrole. The resultant nanocomposite particles have been extensively characterized using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, and thermogravimetry.     

Morphology and film formation of poly(butyl methacrylate)–polypyrrole core–shell latex particles

 Core–shell latex particles made of a poly(butyl methacrylate) (PBMA) core and a thin polypyrrole (PPy) shell were synthesized by two-stage polymerization. In the first stage, PBMA latex particles were synthesized in a semicontinuous process by free-radical polymerization. PBMA latex particles were labeled either with an energy donor or with an energy acceptor, in two different syntheses. These particles were used in a second stage as seeds for the synthesis of the core–shell particles. The PPy shell was polymerized around the PBMA core latex in an oxidative chemical in situ polymerization. Proofs for the success of the core–shell synthesis were obtained using nonradiative energy transfer (NRET) and atomic force microscopy (AFM). NRET gives access to the rate of polymer chain migration between adjacent particles in a film annealed at a temperature above the glass-transition temperature T _g of the particles. Slower chain migration of the PBMA polymer chains was obtained with the PBMA–PPy core–shell particles compared to rate of the PBMA polymer chain migration found with the pure, uncoated PBMA particles. This result is due to the coating of PBMA by PPy, which hinders the migration of the PBMA polymer chains between adjacent particles in the film. This observation has been confirmed by AFM measurements showing that the flattening of the latex film surface is much slower for the core–shell particles than for the pure PBMA particles. This result can again be explained by the presence of a rigid PPy shell around the PBMA core. Thus, these two complementary methods have given evidence that real core–shell particles were synthesized and that the shell seriously hinders film formation of the particles in spite of the fact that it is very thin (thickness close to 1 nm) compared to the size (750 and 780 nm in diameter) of the PBMA core. Transparency measurements confirm the results obtained by NRET and AFM. When the films are placed at a temperature higher than the T _g of PBMA, the increase in transparency is faster for films made with the uncoated PBMA particles than for films made with the coated PBMA particles. This result indicates again that the presence of the rigid PPy layer around the PBMA core reduces considerably the speed at which the structure of the film is modified when heated above the T _g of PBMA. Received: 02 September 1999 Accepted: 21 December 1999