A Novel One‐Pot Synthesis of Substituted Quinolines

A synthesis of quinoline derivatives is described via reaction between ethyl bromopyruvate (=ethyl 3‐bromo‐2‐oxopropanoate), acetylenedicarboxylate, and isatin (=1H‐indole‐2,3‐dione) in the presence of NaH as a base. Also, these reactions were performed without ethyl bromopyruvate. The reaction in the presence of ethyl bromopyruvate provides regioselectively a quinoline with the ethyl ester group in 4‐position. In the absence of ethyl bromopyruvate, the reaction leads to functionalized quinolines with the same ester groups in 2‐, 3‐, and 4‐positions.     

Sol‐Gel Synthesis and Photocatalytic Study of Visible Light Active N‐Doped KSbWO6

KSbWO₆ was prepared by sol‐gel method. N‐doped KSbWO₆ (KSbWO_6–xN_x) was obtained by heating KSbWO₆ and urea at 400 °C. Both the compounds are characterized by powder X‐ray diffraction (XRD), TEM, SEM‐EDS, X‐ray photo electronic spectroscopy (XPS), and UV/Vis diffuse reflectance spectroscopy (UV‐DRS). A shift in the peak positions of powder XRD and XPS spectra was observed. The band gap energy (E_g) of KSbWO₆ and N‐doped KSbWO₆ was obtained from their diffused reflectance spectra.E_g was reduced from 3.17 eV to 2.56 eV upon nitrogen doping in KSbWO₆. The reduction of the E_g is attributed to the lifting of valence band of N‐doped KSbWO₆, due to the mixing of O 2p states with N 2p states. The photocatalytic activity of both the samples was studied by degradation of methylene blue (MB). The nitrogen doped KSbWO₆ shows higher photocatalytic activity compared to that of KSbWO₆.     

Crystalline Structure of Mangiferin,a C‐Glycosyl‐Substituted 9H‐Xanthen‐9‐one Isolated from the Stem Bark of Mangifera indica

The crystalline structure of mangiferin (=2‐β‐D ‐glucopyranosyl‐1,3,6,7‐tetrahydroxy‐9H‐xanthen‐9‐one; 1 ), a biologically active xanthenone C‐glycoside, isolated from the stem bark of Mangifera indica (Anacardiaceae), was unambiguously determined by single‐crystal X‐ray diffraction (XRD). The crystal structure is summarized as follows: triclinic, P1, a=7.6575(5), b=11.2094(8), c=11.8749(8) Å, α=79.967(5), β=87.988(4), γ=72.164(4)°, V=955.3(1) ų, and Z=2. The structure also shows two molecules in the asymmetric unit cell and five crystallization H₂O molecules. The packing is stabilized by several intermolecular H‐bonds involving either the two symmetry‐independent mangiferin molecules 1a and 1b , or the H₂O ones.     

N‐Bromosuccinimide (NBS): A Novel and Efficient Catalyst for the Synthesis of 14‐Aryl‐14H‐dibenzo[a,j]xanthenes under Solvent‐Free Conditions

A novel procedure for the synthesis of 14‐aryl‐14H‐dibenzo[a,j]xanthenes through one‐pot condensation of naphthalen‐2‐ol with arenecarbaldehydes in the presence of N‐bromosuccinimide (NBS) as catalyst under solvent‐free conditions is described.     

Study of phenothiazine and N‐methyl phenothiazine by infrared,raman, 1H‐, and 13C‐NMR spectroscopies

A complete vibrational analysis of the Fourier transform (FT) infrared (IR) and FT‐Raman spectra of both molecules was carried out using quantum chemical calculations. The structure of phenothiazine (PTZ) and N‐methylphenothiazine (N‐MePTZ) were studied by semiempirical, and ab initio methods. Different basis sets and two new procedures for scaling the frequencies of the ring modes were used. Vibrational data of the methyl group in N‐MePTZ were interpreted in terms of the different molecular conformations in the solid state. The ¹H‐ and ¹³C–nuclear magnetic resonance (NMR) data were interpreted in terms of the electron densities on the atoms and the stacking solute–solute association in dimethyl sulfoxide solution. Chemical shifts were related to the Merz‐Kollman atomic charges. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Copper‐Catalyzed Direct Sulfoximination of Heteroaromatic N‐Oxides by Dual C−H/N−H Dehydrogenative Cross‐Coupling

A dual C?H/N?H dehydrogenative coupling of quinoline‐type N‐oxides with sulfoximines that leads to N‐(hetero)arylsulfoximines in high yields has been realized by using a catalytic amount of CuBr in air. The method does not require any additional ligand, base, reactivity modifier or oxidant and provides a practical route towards a series of sulfoximidoyl‐functionalized quinolines and derivatives.     

Preparation of Silica Nanoparticles from Organic Laboratory Waste of Silica Gel HF254 and Their Use as a Highly Efficient Catalyst for the One‐Pot Synthesis of 2,3‐Dihydro‐1H‐isoindolone Derivatives

Reaction of an isocyanide with an iminium ion intermediate, formed by reaction between 6‐formyl‐2,3‐dimethoxybenzoic acid and secondary amines (dibenzyl‐ or benzyl(isopropyl)amine) in the presence of silica nanoparticles (silica NPs, ca. 70 nm) proceeds smoothly at room temperature to afford 2,3‐dihydro‐1H‐isoindolone derivatives in high yields.     

Synthesis of N,N‐Dialkyl‐9‐oxoacridine‐10(9H)‐carbothioamides via the Reaction of (2‐Halophenyl)(2‐isothiocyanatophenyl)methanones with Secondary Amines,Followed by Cyclization with NaH

The first preparation of acridin‐9(10H)‐ones carrying a tertiary thiocarbamoyl group at C(10), i.e., N,N‐dialkyl‐9‐oxoacridine‐10(9H)‐carbothioamides 9 , is described. The method is based on the reaction of (2‐halophenyl)(2‐isothiocyanatophenyl)methanones 7 , prepared from (2‐aminophenyl)(2‐halophenyl)methanones 5 by a convenient three‐step sequence, with secondary amines in DMF at room temperature to generate the corresponding thiourea derivatives 8 in situ, which are treated with NaH at 100–120° to provide the desired products in one‐pot reactions in generally good yields.     

Towards a Molecular Understanding of Cation–Anion Interactions—Probing the Electronic Structure of Imidazolium Ionic Liquids by NMR Spectroscopy,X‐ray Photoelectron Spectroscopy and Theoretical Calculations

Ten [C₈C₁Im]⁺ (1‐methyl‐3‐octylimidazolium)‐based ionic liquids with anions Cl^?, Br^?, I^?, [NO₃]^?, [BF₄]^?, [TfO]^?, [PF₆]^?, [Tf₂N]^?, [Pf₂N]^?, and [FAP]^? (TfO=trifluoromethylsulfonate, Tf₂N=bis(trifluoromethylsulfonyl)imide, Pf₂N=bis(pentafluoroethylsulfonyl)imide, FAP=tris(pentafluoroethyl)trifluorophosphate) and two [C₈C₁C₁Im]⁺ (1,2‐dimethyl‐3‐octylimidazolium)‐based ionic liquids with anions Br^? and [Tf₂N]^? were investigated by using X‐ray photoelectron spectroscopy (XPS), NMR spectroscopy and theoretical calculations. While ¹H NMR spectroscopy is found to probe very specifically the strongest hydrogen‐bond interaction between the hydrogen attached to the C² position and the anion, a comparative XPS study provides first direct experimental evidence for cation–anion charge‐transfer phenomena in ionic liquids as a function of the ionic liquid’s anion. These charge‐transfer effects are found to be surprisingly similar for [C₈C₁Im]⁺ and [C₈C₁C₁Im]⁺ salts of the same anion, which in combination with theoretical calculations leads to the conclusion that hydrogen bonding and charge transfer occur independently from each other, but are both more pronounced for small and more strongly coordinating anions, and are greatly reduced in the case of large and weakly coordinating anions.     

Cationic Heterocycles as Ligands: Synthesis and Reactivity with Anionic Nucleophiles of Cationic Triruthenium Clusters Containing C‐Metalated N‐Methylquinoxalinium or N‐Methylpyrazinium Ligands

The cationic cluster complexes [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L¹Me)]⁺ ( 3 ⁺; HL¹=quinoxaline) and [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐L²Me)]⁺ ( 5 ⁺; HL²=pyrazine) have been prepared as triflate salts by treatment of their neutral precursors [Ru₃(CO)₁₀(μ‐H)(μ‐κ²N,C‐Lⁿ)] with methyl triflate. The cationic character of their heterocyclic ligands is responsible for their enhanced tendency to react with anionic nucleophiles relative to that of hydrido triruthenium carbonyl clusters that have neutral N‐heterocyclic ligands. These clusters react instantaneously with methyl lithium and potassium tris‐sec‐butylborohydride (K‐selectride) to give neutral products that contain novel nonaromatic N‐heterocyclic ligands. The following are the products that have been isolated: [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹Me₂)] ( 6 ; from 3 ⁺ and methyl lithium), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L¹HMe)] ( 7 ; from 3 ⁺ and K‐selectride), [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²Me₂)] ( 8 ; from 5 ⁺ and methyl lithium), and [Ru₃(CO)₉(μ‐H)(μ₃‐κ²N,C‐L²HMe)] ( 11 ; from 5 ⁺ and K‐selectride). Whereas the reactions of 3 ⁺ lead to products that arise from the attack of the corresponding nucleophile at the C atom of the only CH group adjacent to the N‐methyl group, the reactions of 5 ⁺ give mixtures of two products that arise from the attack of the nucleophile at one of the C atoms located on either side of the N‐methyl group. The LUMOs and the atomic charges of 3 ⁺ and 5 ⁺ confirm that the reactions of these clusters with anionic nucleophiles are orbital‐controlled rather than charge‐controlled processes. The N‐heterocyclic ligands of all of these neutral products are attached to the metal atoms in nonconventional face‐capping modes. Those of compounds 6 – 8 have the atoms of a ligand C?N fragment σ‐bonded to two Ru atoms and π‐bonded to the other Ru atom, whereas the ligand of compound 11 has a C? N fragment attached to a Ru atom through the N atom and to the remaining two Ru atoms through the C atom. A variable‐temperature ¹H NMR spectroscopic study showed that the ligand of compound 7 is involved in a fluxional process at temperatures above ?93 °C, the mechanism of which has been satisfactorily modeled with the help of DFT calculations and involves the interconversion of the two enantiomers of this cluster through a conformational change of the ligand CH₂ group, which moves from one side of the plane of the heterocyclic ligand to the other, and a 180° rotation of the entire organic ligand over a face of the metal triangle.     

Superstructure of a Substituted Zeolitic Imidazolate Metal–Organic Framework Determined by Combining Proton Solid‐State NMR Spectroscopy and DFT Calculations

We report the supercell crystal structure of a ZIF‐8 analog substituted imidazolate metal–organic framework (SIM‐1) obtained by combining solid‐state nuclear magnetic resonance and powder X‐ray diffraction experiments with density functional theory calculations.     

Synthesis,Spectroscopy, and Computational Analysis of Photoluminescent Bis(aminophenyl)‐Substituted Thiophene Derivatives

Substituted oligothiophenes have a long history in the field of organic electronics, as they often combine outstanding electro‐optical properties with the ease of synthesis. To assist the rational selection of the most promising structures to be synthesized, there is the demand for tools that allow prediction of the properties of the materials. In this study, we present strategies for synthesis and computational characterization, with respect to the fluorescence behavior of oligothiophene‐based materials for organoelectronic applications. In a combined approach, sophisticated computational methodologies are directly compared to experimental results. The M06‐2X functional in combination with the polarizable continuum model in a state‐specific formulation for excited‐state solvation proved to be particularly reliable. In addition, a semiclassical approach for describing the vibrational broadening of the spectra is employed. As a result, a robust procedure for the prediction of the fluorescence spectra of oligothiophene derivatives is presented.