Microsensor Chip Integrated with Gold Nanoparticles‐Modified Ultramicroelectrode Array for Improved Electroanalytical Measurement of Copper Ions

This paper presents a microsensor chip integrated with a gold nanoparticles‐modified ultramicroelectrode array (UMEA) as the working electrode for the detection of copper ions in water. The microsensor chip was fabricated with Micro‐Electromechanical System technique. Gold nanoparticles were electrodeposited onto the surface of UMEA at a constant potential of ?0.3 V. The ratio d/R_b of interelectrode spacing (d) over the individual electrode’s radius (R_b) was investigated to improve the electrochemical performance. The UMEA with a d/R_b of 20 showed the best hemispherical diffusion mode, resulted in fast response time and high current response. The gold nanoparticles increased the active surface area of UMEA by not changing the geometries of UMEA, and the current response was increased further. Incorporating the optimized characteristic of UMEA and gold nanoparticles, the microsensor showed a good linear range from 0.5 to 200 µg L^?1 of copper ions in the acetate buffer solutions with the method of square wave stripping voltammetry. Compared with the gold nanoparticles‐modified disk electrode, the gold nanoparticles‐modified UMEA showed higher sensitivity (0.024 µA mm^?2 µg^?1 L) and lower limit of detection (0.2 µg L^?1). Water samples from river water and tap water were analyzed by the microsensor chip with recovery ranging from 100.7 % to 107.8 %.     

Integrated Microanalytical System Coupling Permeation Liquid Membrane and Voltammetry for Trace Metal Speciation. Technical Description and Optimization

A new minicell coupling the liquid‐liquid extraction technique called permeation liquid membrane (PLM) with an integrated Ir‐based Hg‐plated microelectrode array for voltammetric detection has been developed for the speciation of heavy metals in natural waters. Lead and cadmium have been used as model compounds. The PLM consists of a carrier (0.1 M 22DD+0.1 M lauric acid) dissolved in 1 : 1 mixture of toluene/phenylhexane held in the small pores (30 nm) of a hydrophobic polypropylene membrane (Celgard 2500). One side of this membrane is in contact with a flowing source solution, containing the metal ions of interest. An acceptor or strip solution (pyrophosphate) is placed on the other side of the PLM with the microelectrode array placed at 480 μm of the PLM. The analyte is transported by the carrier from the source solution to the strip solution. The originality of the new minicell is that accumulation in the strip solution is voltammetrically followed by the integrated microelectrode array in real time, and at low concentration level, using square‐wave anodic stripping voltammetry (SWASV). In order to protect the Hg microelectrodes from the adsorption of the hydrophobic carrier, the microelectrodes are embedded in a thin gel layer (280 μm) of 1.5% LGL agarose gel containing 10% of hydrophobic silica particles C18. The choice of optimum conditions is discussed in details in this article. Due to the very small effective strip volume of the new cell (less than 1 μL), high enrichment factor can be obtained (e.g., 330 for Pb) after 2 hours of accumulation. No deaeration of the solutions is required for SWASV measurements. Detection limits under these conditions are 2 pM and 75 pM for Pb and Cd, respectively, using a voltammetric deposition time of 5 min. In addition, no fouling effects were observed with natural water samples.     

Electrocatalytic Application of Girard's Reagent T to Simultaneous Determination of Furaldehydes in Pharmaceutical and Food Matrices by Highly Sensitive Voltammetric Methods

Sensitive and precise voltammetric methods for the determination of trace amounts of furaldehydes, mainly as furfural (F) and 5‐hydroxymethyl‐2‐furaldehyde (HMF), in foods, pharmaceutical and other matrices is described. Determination of total furaldehyde at <μg g^?1 levels in alkaline buffered aqueous media was individually investigated. By the use of ordinary SWV and adsorptive square wave stripping voltammetry (Ad‐SWSV), the detection limits for determination of F and HMF found to be 400 and 10 ng g^?1, respectively. At a 1.0 μg g^?1 level of furfural in sample, the relative standard deviation (n=4) was 2.79%. The application of Ad‐SWSV to the determination of F and HMF, after their in situ derivatization with trimethylaminoacetohydrazide chloride (Girard's reagent T) at a static mercury drop electrode (SMDE) in NH₃‐NH₄Cl buffer of pH 9.5, resulted in a limit of detection of 10 ng g^?1 for the resolved peaks of HMF and F. The results obtained by the proposed method for the real samples were compared with the corresponding results from UV‐spectrophotometry and HPLC experiments in various matrices.     

An Automated Multi-Pumping Pulsed Flow System with Spectrophotometric Detection for the Determination of Phosphate in Natural Waters

In this work, an automated multipumping pulsed flow system was implemented for the determination of phosphate in natural waters. The developed flow approach was based on the spectrophotometric determination of phosphate by using the vanadomolybdate reaction. The exploitation of a very simple manifold configuration relying on the utilization of just two active components, in this case two solenoid actuated micropumps that were accountable for sample and reagent insertion and commutation, reaction zone formation, and solutions propelling, provided a great operational and optimization simplicity, low reagent consumption, and waste minimization.

Linear calibration plots for phosphate concentrations of up to 20 mg L^?1 (R² = 0.999, n = 6) were obtained, with a detection limit of 0.2 mg L^?1. The sampling rate was about 60 samples per hour. The system was applied to the monitoring of phosphate in local streams at specific sampling stations.     

Analytical methods for determination of free metal ion concentration, labile species fraction and metal complexation capacity of environmental waters: A review

Different experimental approaches have been suggested in the last few decades to determine metal species in complex matrices of unknown composition as environmental waters. The methods are mainly focused on the determination of single species or groups of species.The more recent developments in trace elements speciation are reviewed focusing on methods for labile and free metal determination.Electrochemical procedures with low detection limit as anodic stripping voltammetry (ASV) and the competing ligand exchange with adsorption cathodic stripping voltammetry (CLE-AdCSV) have been widely employed in metal distribution studies in natural waters. Other electrochemical methods such as stripping chronopotentiometry and AGNES seem to be promising to evaluate the free metal concentration at the low levels of environmental samples. Separation techniques based on ion exchange (IE) and complexing resins (CR), and micro separation methods as the Donnan membrane technique (DMT), diffusive gradients in thin-film gels (DGT) and the permeation liquid membrane (PLM), are among the non-electrochemical methods largely used in this field and reviewed in the text. Under appropriate conditions such techniques make possible the evaluation of free metal ion concentration.     

Application of A Multichannel Potentiostat to Metal Ion Determinations in Flow Injection Analysis

Abstract

A 4-channel potentiostat has been developed for use with an amperometric array and applied to the determination of a mixture of metal ions in flow injection analysis (FIA). The use of an array facilitates the acquisition of three dimensional electrochemical information in real-time (current vs. potential vs. time). The data acquired can be saved in ASCII format which facilitates post-run plotting of the 2-and 3-D voltammograms in Microsoft Excel. The results demonstrate the increased information content available with an amperometric array over fixed potential electrodes. The ability to identify the individual species in mixed component injections, which is normally not possible with FIA without a prior separation step has been demonstrated. Linear responses to injections of copper(II) ions in the concentration range 500 ppm to 100 ppb were obtained.     

Validated Voltammetric Method for the Simultaneous Determination of Anti‐diabetic Drugs,Linagliptin and Empagliflozin in Bulk,Pharmaceutical Dosage Forms and Biological Fluids

A cobalt oxide nanoparticles (Co₃O₄NPs) and multi walled carbon nanotubes (MWCNTs) modified carbon paste electrodes were used to study the electrochemical behavior of linagliptin and empagliflozin in Britton Robinson buffer solution of pH 8.0 using cyclic and square wave voltammetry. The above mentioned modified electrodes showed highly sensitive sensing and gave an excellent anodic response for both drugs. The peak current varied linearly over the concentration ranges: 3.98×10^?5–1.53×10^?3 mol L^?1 (18.82–723.00 μg/mL) and 7.94×10^?6–1.07×10^?4 mol L^?1 (3.65–48.25 μg/mL) with determination coefficients of 0.9999 and 0.9998 for linagliptin and empagliflozin, respectively. The recoveries and relative standard deviations were found in the following ranges: 98.80 %–102.00 % and 0.23 %–1.90 % for linagliptin and 98.30 %–101.80 % and 0.11 %–1.86 % for empagliflozin. The detection and quantification limits were 1.13×10^?5 and 3.76×10^?5 mol L^?1 (5.34and17.77 μg/mL) for linagliptin, 1.71×10^?6and 5.68×10^?6 mol L^?1 (0.77 and 2.56 μg/mL) for empagliflozin. The proposed sensors have been successfully applied for the determination of the drugs in bulk, pharmaceutical formulations and biological fluids.     

A Batch Injection Analysis System with Square-wave Voltammetric Detection for Fast and Simultaneous Determination of Zinc and Ascorbic Acid

The determination of organic and inorganic compounds in a single run is still a great challenge. In this paper, we developed a method for fast simultaneous determination of ascorbic acid (AA) and zinc ions (Zn) using batch injection analysis with detection by square-wave anodic stripping voltammetry (BIA-SWASV). Britton-Robinson (BR) buffer solution (pH=6.0) as the supporting electrolyte and boron doped diamond (BDD) as the working electrode. The method presented favorable analytical characteristics such as fast response (67 injections h⁻¹), low detection limits (0.2 and 5.4 μmol L⁻¹ for Zn ions and AA, respectively) and recovery values of 99±3%.     

A Novel Adsorptive Square Wave Voltammetric Method for Pico Molar Monitoring of Lorazepam at Gold Ultra Microelectrode in a Flow Injection System by Application of Fast Fourier Transform Analysis

Abstract

This paper describes development of a new analysis system for determination of lorazepam by a novel square wave voltammetry method to perform a very sensitive method. The method used for determination of lorazepam involves measuring the changes in admittance voltammogram of a gold ultramicroelectrode (in 0.05 M H₃PO₄ solution) caused by adsorption of the lorazepam on the electrode surface. Variation of admittance in the detection process is created by inhibition of oxidation reaction of the electrode surface, by adsorbed lorazepam. Furthermore, signal-to-noise ratio is significantly increased by application of discrete fast Fourier transform (FFT) method, background subtraction, and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work, some parameters such as SW frequency, eluent pH, and accumulation time were optimized. Calibration plots are given for solutions containing 10^?6–10^?11 M of lorazepam. The detection limit is calculated to be 6.0 × 10^?12 M (～ 2 pg/ml). The relative standard deviation at concentration 3.0 × 10^?8 M is 6.1% for 5 reported measurements.     

简易型离子选择电极-流动注射分析仪的研制及卤水中氯、溴和碘的连续测定

本文设计研制了简单实用的流通池,组装了简易型离子选择电极—流动注射分析仪,对体系的分析特点和影响因素进行了考察。此装置性能可靠,能满足简单流注分析的需要,并建立了卤水中Cl~-、Br~-和I~-的连续测定方法。