Effect of Poly(amine)s on the Redox Properties of Carboxymethylcellulose and Ferrocene‐modified Poly(amine) Layer‐by‐Layer Films

Multilayer films consisting of carboxymethylcellulose (CMC) and ferrocene‐modified poly(ethyleneimine) (Fc‐PEI) or poly(allylamine hydrochloride) (Fc‐PAH) were successfully prepared on a gold electrode to examine their redox properties. The redox current of (Fc‐PEI/CMC)_n film‐coated electrodes increased with the number of layers, while the (Fc‐PAH/CMC)_n film‐coated electrodes exhibited increased response only for the first eight bilayers. The (Fc‐PEI/CMC)_n and (Fc‐PAH/CMC)_n films deposited on the surface of Fc‐free multilayer film‐coated electrodes also showed a redox response. The (PEI/CMC)₅ film‐coated electrode showed redox responses in Fc‐PEI and Fc‐PAH solutions, confirming the uptake of the Fc‐polymers in the inner film. In contrast, the uptake of the Fc‐polymers in the (PAH/CMC)₅ film was severely suppressed, suggesting that different permeability of (PEI/CMC)₅ and (PAH/CMC)₅ films.     

Microextraction by packed sorbent liquid chromatography with time‐of‐flight mass spectrometry of triazines employing a molecularly imprinted polymer†

Molecularly imprinted polymers for the determination of triazines were synthesized by precipitation using atrazine as template, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as crosslinker, and 2,2′‐azobisisobutrynitrile as initiator. The polymers were characterized by infrared spectroscopy and scanning electron microscopy and packed in a device for microextraction by packed sorbent aiming for the preconcentration/cleanup of herbicides, such as atrazine, simazine, simetryn, ametryn, and terbutryn in corn samples. Liquid chromatography coupled with time‐of‐flight mass spectrometry was used for the separation and determination of the herbicides. The selectivity coefficient of molecularly imprinted polymers was compared with that of nonimprinted polymer for the binary mixtures of atrazine/propanil and atrazine/picloram, and the values obtained were 15.6 and 2.96, respectively. The analytical curve ranged from 10 to 80 μg/kg (r = 0.989) and the limits of detection and quantification in the corn matrices were 3.3 and 10 μg/kg, respectively. Intra‐ and interday precisions were < 14.8% and accuracy was better than 90.9% for all herbicides. Polymer synthesis was successfully applied to the cleanup and preconcentration of triazines from fortified corn samples with 91.1–109.1% of recovery.     

Polyelectrolyte Multilayer Films Containing Ferrocene: Effects of Polyelectrolyte Type and Ferrocene Contents in the Film on the Redox Properties

Electrochemical properties of Fc‐PEM films have been studied by changing the chemical structure of the polymer chains and the content of Fc moiety in the film systematically. We have prepared a series of PEM films by a layer‐by‐layer deposition of polycations, Fc‐modified poly(allylamine) (Fc‐PAA) and poly(ethyleneimine) (Fc‐PEI), and polyanionic poly(vinyl sulfate) (PVS) on the surface of a gold electrode. The redox properties of the Fc‐PAA/PVS and Fc‐PEI/PVS films depended significantly on the content of Fc moiety in the polymer chains and on the polymer type. Fc‐ PAA and Fc‐PEI polymer chains can penetrate 3 or 4 PAA/PVS bilayers inserted between the redox polymers and electrode. The Fc‐PAA film‐modified electrode can be used for electrocatalytic oxidation of ascorbic acid.     

A Label‐Free Amperometric Immunosensor Based on Redox‐Active Ferrocene‐Branched Chitosan/Multiwalled Carbon Nanotubes Conductive Composite and Gold Nanoparticles

A novel immunosensor has been developed by self‐assembling Au NPs onto a ferrocene‐branched chitosan/multiwalled carbon nanotubes (CS‐Fc/MWCNTs) modified electrode for the sensitive determination of hepatitis B surface antigen (HBsAg). The formation of CS‐Fc effectively avoids the leakage of Fc and retains its electrochemical activity. Incorporation of MWCNTs and Au NPs into CS‐Fc further increases the electrochemical active Fc in the CS films and provides interactive sites for the immobilization of HBsAb. The morphologies and electrochemistry of the formed biofilm were investigated by using scanning electron microscopy and electrochemical techniques. The immunosensor exhibits a specific response to HBsAg in the range of 1.0–420 ng mL^?1. Excellent analytical performance, fabrication reproducibility and operational stability of the proposed immunosensor indicated its promising application in clinical diagnostics.     

Ferrocene‐Linkage‐Facilitated Charge Separation in Conjugated Microporous Polymers

Conjugated microporous polymers (CMPs) have full access to the organic synthesis toolbox and feature‐rich functionality, structural diversity, and high surface area. We incorporated ferrocene (Fc) into the backbones of CMPs and systematically engineered their optical energy gaps. Compared with the CMPs without Fc units yet adopting a similar molecular orbital level, Fc‐based CMPs can sufficiently generate reactive oxygen species (ROS) under visible light. The resultant ROS are able to effectively decompose the absorbed pollutants, including organic dyes and chemical warfare agents. Specifically, Fc‐based CMPs significantly outperform commercial TiO₂ (P25) in the degradation of methylene blue and are capable of converting 2‐chloroethyl ethyl sulfide (a mustard gas simulant) into a completely nontoxic product.     

Self‐Healing,Expansion–Contraction,and Shape‐Memory Properties of a Preorganized Supramolecular Hydrogel through Host–Guest Interactions

Supramolecular materials cross‐linked between polymer chains by noncovalent bonds have the potential to provide dynamic functions that are not produced by covalently cross‐linked polymeric materials. We focused on the formation of supramolecular polymeric materials through host–guest interactions: a powerful method for the creation of nonconventional materials. We employed two different kinds of host–guest inclusion complexes of β‐cyclodextrin (βCD) with adamantane (Ad) and ferrocene (Fc) to bind polymers together to form a supramolecular hydrogel (βCD‐Ad‐Fc gel). The βCD‐Ad‐Fc gel showed self‐healing ability when damaged and responded to redox stimuli by expansion or contraction. Moreover, the βCD‐Ad‐Fc gel showed a redox‐responsive shape‐morphing effect. We thus succeeded in deriving three functions from the introduction of two kinds of functional units into a supramolecular material.     

Self‐Healing,Expansion–Contraction,and Shape‐Memory Properties of a Preorganized Supramolecular Hydrogel through Host–Guest Interactions

Supramolecular materials cross‐linked between polymer chains by noncovalent bonds have the potential to provide dynamic functions that are not produced by covalently cross‐linked polymeric materials. We focused on the formation of supramolecular polymeric materials through host–guest interactions: a powerful method for the creation of nonconventional materials. We employed two different kinds of host–guest inclusion complexes of β‐cyclodextrin (βCD) with adamantane (Ad) and ferrocene (Fc) to bind polymers together to form a supramolecular hydrogel (βCD‐Ad‐Fc gel). The βCD‐Ad‐Fc gel showed self‐healing ability when damaged and responded to redox stimuli by expansion or contraction. Moreover, the βCD‐Ad‐Fc gel showed a redox‐responsive shape‐morphing effect. We thus succeeded in deriving three functions from the introduction of two kinds of functional units into a supramolecular material.     

Immobilization of atrazine on gold,a first step towards the elaboration of an indirect immunosensor: characterization by XPS and PM‐IRRAS

As part of our long‐term goal to design a novel type of immunosensor based on IR transduction, we devised two strategies to immobilize derivatives of the herbicide atrazine on the surface of planar gold substrates. Both strategies take advantage of the well‐known formation of self‐assembled monolayers of thiolates via spontaneous chemisorption of thiols or disulphides on noble metal surfaces. The first strategy involved the direct chemisorption of a disulphide derivative of atrazine, while the second strategy was based on the covalent attachment of a polymer tethered with atrazine derivatives to a previously adsorbed thiolate carrying a carboxylic acid head group. The resulting organic thin films on gold were characterized by polarization modulation infrared reflection‐absorption spectroscopy (PM‐IRRAS) and XPS. The binding of a polyclonal anti‐atrazine antibody to both sensing layers was also tested and compared. It appeared that specific molecular recognition occurred only on the atrazine disulphide sensing layer. Copyright © 2006 John Wiley & Sons, Ltd.     

Ferrocene‐Substituted Naphthalenediimide with Broad Absorption and Electron‐Transport Properties in the Segregated‐Stack Structure

A new naphthalenediimide (NDI) molecule, where two ferrocene (Fc) units were directly attached to both imide nitrogens ( Fc‐NDI‐Fc ), was synthesized. The Fc units provide high crystallinity to Fc‐NDI‐Fc with good solubility to conventional organic solvents. The Fc units also work as electron‐donating substituents, in contrast to the electron‐deficient NDI unit, resulting in broad charge‐transfer absorption of Fc‐NDI‐Fc from the UV region to 1500 nm in the solid state. The crystal structure analysis revealed that Fc‐NDI‐Fc formed a segregated‐stack structure. The DFT calculation based on the crystal structure showed that the NDI π‐orbitals extended over two axes. The extended π‐network of the NDI units led to the electron‐transport properties of Fc‐NDI‐Fc , which was confirmed using a flash‐photolysis time‐resolved microwave conductivity technique.     

Synthesis of polymeric 1‐iminopyridinium ylides as photoreactive polymers

Two synthetic routes to polymeric 1‐imino pyridinium ylides as new photoreactive polymeric architectures were investigated. In the first approach, polymerization of newly synthesized 1‐imino pyridinium ylide containing monomers yielding their polymeric analogues was achieved by free radical polymerization. Alternatively, reactive precursor polymers were synthesized and converted into the respective 1‐imino pyridinium ylide polymers by polymer analogous reactions on reactive precursor polymers. Quantitative conversion of the reactive groups was achieved with pentafluorophenyl ester containing polymers and newly synthesized photoreactive amines as well as by the reaction of poly(4‐vinylbenzoyl azide) with a photoreactive alcohol. The polymers obtained by both routes were examined regarding their photoreaction products and kinetics in solution as well as in thin polymer films. Contact angle measurements of water on the polymer films before and after irradiation showed dramatic changes in the hydrophilicity of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 832–844, 2010     

Regioregular poly[3‐(4‐alkoxyphenyl)thiophene]s

An easy synthetic procedure for soluble poly[3‐(4‐alcoxyphenyl)thiophene]s is reported. The polymers present a high regioregularity degree as determined by both UV–vis spectra and ¹H and ¹³C NMR analysis. Furthermore, X‐ray powder diffraction analysis performed on films of the polymers suggests a π‐stacked packing structure of the macromolecules. Electrical characterization was performed on one of the synthesized polythiophenes on both undoped and doped (with FeCl₃ or iodine) films. The conductivity and charge‐carrier mobility were assessed by current–voltage and field effect measurements. Well‐structured polymer films were obtained simply via spin coating from chloroform solutions and without the need of further processing, unlike other regioregular polythiophenes reported in the literature. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1758–1770, 2007     

Functionalized conducting polymers for chemical sensors – an in situ ESR/UV‐Vis‐NIR voltammetric study

The redox and optical properties of various well defined polymer and copolymer films containing pyrrole or thiophene units were studied. The in situ ESR/UV‐Vis‐NIR spectroelectrochemistry was applied to investigate polymers and copolymers deposited both electrochemically or by a special chemical procedure using adhesion promoter onto the optically transparent indium‐tin‐oxide (ITO) electrodes. The spectroelectrochemical responses of chemically and electrochemically prepared polythiophenes on ITO were compared and the electronic structures of both polymers found to be similar. In situ ESR/UV‐Vis‐NIR voltammetric studies on electrochemically prepared copolymers containing pyrrole units and various N,N′‐ethylene‐bis(salicylidenimine) (salen) transition metal complexes indicate the presence of both polysalen and polypyrrole redox active centers in the copolymer.     

Photomobile Polymer Materials: Photoresponsive Behavior of Cross‐Linked Liquid‐Crystalline Polymers with Mesomorphic Diarylethenes

Cross‐linked liquid‐crystalline (LC) polymers with a mesomorphic diarylethene were prepared to demonstrate a versatile strategy for cross‐linked photochromic LC polymers as photomobile materials. Upon exposure to UV light to cause photocyclization of the diarylethene chromophore, the cross‐linked polymer films bend toward an actinic light source. By irradiation with visible light to cause a closed‐ring to open‐ring isomerization, the bent films revert to the initial flat state. Without visible‐light irradiation, the bent films remain bent even at 120 °C, indicating high thermal stability of the cross‐linked diarylethene LC polymers.     

Deep‐red emissive conjugated poly(2,6‐BODIPY‐ethynylene)s bearing alkyl side chains

Novel deep‐red emissive poly(2,6‐BODIPY‐ethynylene)s bearing dodecyl side chains (polymers A , B , and C ) have been prepared by palladium‐catalyzed Sonogashira polymerization of 2,6‐diiodo‐functionalized BODIPY monomers with 2,6‐diethynyl‐functionalized BODIPY monomers. These polymers emit in the deep‐red region with emission maxima at up to 690 nm, and exhibit significant red shifts (up to 166 and 179 nm) of both absorption and emission maxima compared with their parent BODIPY dyes due to significant extension of π‐conjugation. These polymers possess good thermal stability with decomposition temperature between 270 and 360 °C. The polymers exhibit a little larger Stokes shifts and shorter lifetime than their corresponding BODIPY dyes. The solid state thin films of polymers A , B , and C emit in near‐infrared region between 723 and 743 nm, and show significantly red shifts (up to 57 nm) in absorption and emission maxima relative to their polymer solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5354–5366, 2009     

pH‐Switchable Bioelectrocatalysis Based on Weak Polyelectrolyte Multilayers

Weak polyelectrolytes poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) were assembled into {PAH/PAA}_n layer‐by‐layer films on electrodes. The cyclic voltammetry (CV) response of ferrocenecarboxylic acid (Fc(COOH)) at {PAH/PAA}₅ film electrodes assembled under the specific condition showed pH‐sensitive “on‐off” switching property. This property was further used to control the electrocatalytic oxidation of glucose by glucose oxidase (GOD) with Fc(COOH) as the electron transfer mediator, so that the pH‐switchable bioelectrocatalysis could be realized. The mechanism of pH‐sensitive behavior of the system was explored and believed to originate from the pH‐dependent structure change of the films.     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Novel electroluminescent cationic polyelectrolyte based on poly[(fluorene‐2,7‐diylvinylene)‐alt‐(1,4‐phenylenevinylene)] and its precursor

A novel conjugated poly[(fluorene‐2,7‐vinylene)‐alt‐(1,4‐phenylenevinylene)] derivative 2 with quaternizable tertiary amino groups was synthesized by Heck coupling of a substituted 2,7‐dibromofluorene and 1,4‐dialkoxy‐2,5‐divinylbenzene. The corresponding quaternary ammonium cationic polyelectrolyte 3 was obtained by the treatment of 2 with bromoethane. Both polymers were soluble in common organic solvents, like tetrahydrofuran, chloroform, and dichloromethane. Polymer 3 showed a limited solubility in alcohols and was insoluble in water. Photophysical and electrochemical properties of the resulting polymers were fully investigated. An intensive green photoluminescence (PL) with maxima at 550 and 545 nm was observed from thin films of 2 and 3 polymers, respectively, red‐shifted compared with the PL emission spectra measured in the solution. The electrochemical band gaps were 2.38–2.45 eV. Single‐layer and double‐layer (with poly[3,4‐(ethylenedioxy)thiophene]/poly (styrenesulfonate) (PEDOT:PSS)) light‐emitting devices (LEDs) with ITO and Al electrodes were prepared and studied. They emitted a green light and their electroluminescence (EL) spectra were similar to those of PL thin films. The external EL efficiency was determined to be 0.43 and 0.32% for ITO/PEDOT:PSS/ 2 /Al and ITO/PEDOT:PSS/ 3 /Al LEDs, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1016–1027, 2007     

Synthesis and properties of nitrogen‐linked poly(2,7‐carbazole)s as hole‐transport material for organic light emitting diodes

A novel class of carbazole polymers, nitrogen‐linked poly(2,7‐carbazole)s, was synthesized by polycondensation between two bifunctional monomers using the palladium‐catalyzed amination reaction. The polymers were characterized by ¹H NMR, Infrared, Gel permeation chromatography, and MALDI‐TOF MS and it was revealed that the combination of the monomer structures is important for producing high molecular weight polymers. Thermal analysis indicated a good thermal stability with high glass transition temperatures, e.g., 138 °C for the higher molecular weight polymer P2 . To pursue the application possibilities of these polymers, their optical properties and energy levels were investigated by UV‐Vis absorption and fluorescence spectra as well as their electrochemical characteristics. Although the blue light emission was indeed observed for all polymers in solution, the quantum yields were very low and the solid films were not fluorescent. On the other hand, the HOMO levels of the polymers estimated from the onset potentials for the first oxidation in the solid thin films were relatively high in the range of ?5.12 to ?5.20 eV. Therefore, light emitting diodes employing these polymers as a hole‐transport layer and iridium(III) complex as a triplet emitter were fabricated. The device of the nitrogen‐linked poly(2,7‐carbazole) P3 with p,p′‐biphenyl spacer, which has a higher HOMO level and a higher molecular weight, showed a much better performance than the device of P2 with m‐phenylene spacer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3880–3891, 2009     

Synthesis,photophysics, structure‐tunable photoluminescence,and electrochemical properties of soluble poly(p‐phenylenevinylene)‐based polymers with adjacent 1,3,4‐oxadiazoles in the backbone

Three new poly(p‐phenylenevinylene)‐based polymers containing two 1,3,4‐oxadiazole moieties in the main chain per repeat unit were synthesized by Heck coupling. A single, double, or triple bond was introduced between the oxadiazoles to provide a means for modifying the polymer properties. The polymers were readily soluble in common organic solvents and showed T_g values lower than 50 °C. The color of the emissive light in both the solid state and the solution could be tuned by a change in the nature of the bond between the oxadiazole rings. The polymers emitted ultraviolet‐green light in solution with a photoluminescence (PL) emission maximum at 345–483 nm and blue‐green light at 458–542 nm in thin films. The PL quantum yields in solution were 0.36–0.43. The electrochemical properties are affected by the nature of the bond between the oxadiazoles as well. In polymers with a single bond between the oxadiazoles, a lower ionization potential was observed than in polymers with a double or triple bond. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3079–3090, 2005     

Synthesis and characterization of low‐band‐gap conjugated polymers containing phenothiazine and benzo‐2,1,3‐thia‐/seleno‐diazole

Two phenothiazine‐based conjugated polymers, poly(3, 7‐divinylene‐N‐octyl‐phenothiazine‐alt‐benzo‐2,1,3‐ thiadiazole) (PQS) and poly(3,7‐divinylene‐N‐octyl‐phenothiazine‐alt‐benzo‐2,1,3‐selenodiazole) (PQSe) were synthesized by Heck coupling reaction. The chemical structures of the two polymers were confirmed by ¹H‐NMR and Ft‐IR. They showed good solubility in some common organic solvents such as tetrahydrofuran (THF), chloroform. The weight‐average molecular weight (Mw) of the polymers determined by GPC in THF against polystyrene standards was 3.7 × 10³ for PQS and 1.9 × 10³ for PQSe, respectively. The temperatures of 5% weight loss (T₅) were 385.0°C for PQS and 324.0°C for PQSe, respectively, determined by TGA measurements under nitrogen ambience. UV–vis absorption spectra of the polymer films showed the absorption maxima at 537 nm for PQS and 539 nm for PQSe, with the full width at half maximum (FWHM) of 190 and 230 nm, respectively. The optical band gaps ( ) of the polymer films are 1.86 eV for PQS and 1.80 eV for PQSe, respectively. As the polymers have low‐band‐gap and broad absorption in the visible region, they may be used as potential light‐harvesting materials for photovoltaic devices (PVDs). Furthermore, photoluminescence (PL) spectra of the polymer solutions showed the emission maxima at 698 nm for PQS and 709 nm for PQSe, with FWHM of 152 nm and 167 nm, respectively, which revealed that these two polymers may be used as red and near infrared light‐emitting materials for polymeric light‐emitting diodes (PLEDs). Copyright © 2009 John Wiley & Sons, Ltd.