Layer‐by‐Layer Assemblies of Montmorillonite and Bacterial Cytochromes for Bioelectrocatalytic Devices

Clay‐based layer‐by‐layer architectures are studied in view of the development of new electrode materials for two highly attractive enzymatic reactions: metal bioremediation and hydrogen uptake. The buildup of layer‐by‐layer (LBL) assemblies of positively charged specific mediators of these enzymatic reactions and negatively charged montmorillonite nanoparticles were carried out onto gold and graphite electrodes. The structure and stability of the assemblies were examined using quartz crystal microgravimetry (QCM) and electrochemical techniques. Satisfactory catalytic efficiencies were observed through the LBL construction, either for bacterial cytochrome c₃‐mediated metal reduction, or hydrogen uptake via immobilized hydrogenase in the presence of an artificial shuttle, methylviologen. Interestingly, it is established that intercalating cytochrome c₃ layers between hydrogenase/montmorillonite layers not only protects hydrogenase from leaching, but allows H₂ uptake/evolution catalytic reaction without any additional diffusing redox mediator.     

Recent Progress on Graphene‐based Electrochemical Biosensors

The detailed records and conclusions on the important advancements in graphene‐based electrochemical biosensors have been reviewed. Due to their outstanding properties, graphene‐based materials have been widely studied for the accurate electrochemical detection of many biomolecules, which is extremely vital to the development of biomedical instruments, clinical diagnosis, and disease treatment. This review discusses the graphene research for the effective immobilization of enzymes, including glucose oxidase, horseradish peroxidase, and hemoglobin, etc., and the accurate detection of biomolecules, including glucose, hydrogen peroxide, dopamine, ascorbic acid, uric acid, nicotinamide adenine dinucleotide, DNA, RNA, and carcinoembryonic antigen, etc. In most of the cases, the graphene‐based biosensors exhibited remarkable performance with high sensitivities, wide linear detection ranges, low detection limits, and long‐term stabilities.     

A Novel Electrochemical DNA Biosensor Fabricated with Layer‐by‐Layer Covalent Attachment of Multiwalled Carbon Nanotubes and Gold Nanoparticles

A novel DNA biosensor has been fabricated for the detection of DNA hybridization based on layer‐by‐layer (LBL) covalent assembly of gold nanoparticles (GNPs) and multiwalled carbon nanotubes (MWCNTs). The stepwise LBL assembly process was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The hybridization events were monitored by differential pulse voltammetry (DPV) measurement of the intercalated doxorubicin, and the factors influencing the performance of the DNA hybridization was investigated in detail. The signal was linearly changed with target DNA concentration increased from 0.5 to 0.01 nM, and had a detection limit of 7.5 pM (signal/noise ratio of 3). In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA‐hybridization conditions.     

Carbon Nanotubes‐Based Amperometric Cholesterol Biosensor Fabricated Through Layer‐by‐Layer Technique

A carbon nanotubes‐based amperometric cholesterol biosensor has been fabricated through layer‐by‐layer (LBL) deposition of a cationic polyelectrolyte (PDDA, poly(diallyldimethylammonium chloride)) and cholesterol oxidase (ChOx) on multi‐walled carbon nanotubes (MWNTs)‐modified gold electrode, followed by electrochemical generation of a nonconducting poly(o‐phenylenediamine) (PPD) film as the protective coating. Electrochemical impedance measurements have shown that PDDA/ChOx multilayer film could be formed uniformly on MWNTs‐modified gold electrode. Due to the strong electrocatalytic properties of MWNTs toward H₂O₂ and the low permeability of PPD film for electroacitve species, such as ascorbic acid, uric acid and acetaminophen, the biosensor has shown high sensitivity and good anti‐interferent ability in the detection of cholesterol. The effect of the pH value of the detection solution on the response of the biosensor was also investigated. A linear range up to 6.0 mM has been observed for the biosensor with a detection limit of 0.2 mM. The apparent Michaelis‐Menten constant and the maximum response current density were calculated to be 7.17 mM and 7.32 μA cm^?2, respectively.     

Amperometric Glucose Biosensors Based on Glassy Carbon and SWCNT‐Modified Glassy Carbon Electrodes

Different carbonaceous materials, such as single‐walled carbon nanotubes (SWCNTs) and glassy carbon submitted to an electrochemical activation at +1.80 V (vs. SCE) for 900 s, have been used with the aim of comparing their performances in the development of enzyme electrodes. Commercial SWCNTs have been pretreated with 2.2 M HNO₃ for 20 h prior to use. The utility of activated GC as promising material for amperometric oxidase‐based biosensors has been confirmed. With glucose oxidase (GOx) as a model enzyme, glucose was efficiently detected up to 1 mM without the use of a mediator. Both electrodes operated in stirred solutions of 0.1 M phosphate buffer (pH 5.5), containing dissolved oxygen, at a potential of ?0.40 V vs. SCE. Although the performances of the two carbonaceous materials were comparable, the biosensors based on activated GC were characterized by a practically unchanged response 40 days after the fabrication, a better signal to noise ratio, and a little worse sensitivity. In addition, the preparation procedure of such biosensors was more simple, rapid and reproducible.     

A Simple Layer‐by‐Layer Assembly Strategy for a Reagentless Biosensor Based on a Nanocomposite of Methylene Blue‐Multiwalled Carbon Nanotubes

A simple layer‐by‐layer (LBL) assembly strategy was established for constructing a novel reagentless biosensor based on a nanocomposite of methylene blue multiwalled carbon nanotubes (MB‐MWNTs). A nanocomposite of MB‐MWNTs was obtained by direct premixing and possessed good dispersion in barbital‐HCl buffer. Through electrostatic interactions, the nanocomposite of MB‐MWNTs could alternately be assembled with horseradish peroxidase (HRP) on the Au electrode modified with precursor films. UV/Vis spectra and scanning electron microscopy (SEM) were applied to reveal the formation of the nanocomposite of MB‐MWNTs. The LBL assembly process was also verified by electrochemical impedance spectroscopy (EIS). The MB is a well‐established mediator and efficiently facilitated the electron shuttle between the HRP and the electrode, as demonstrated by the cyclic voltammetry (CV) measurements. The as‐prepared reagentless biosensor exhibited a fast response for the determination of hydrogen peroxide (H₂O₂) and reached 95% of the steady‐state current within 3 s. It was found that the linear response range of the reagentless biosensor for H₂O₂ was from 4.0 μM to 3.78 mM with a detection limit of 1.0 μM and a sensitivity of 22.5 μA mM⁻¹. The biosensor exhibited a high reproducibility and stability.     

Recent development in chitosan nanocomposites for surface‐based biosensor applications

Recent years have witnessed ever expanding use of biosensors in the fields of environmental monitoring, homeland security, pharmaceutical, food and bioprocessing, and agricultural industries. To produce effective and reliable biosensors, good quality immobilization of biological recognition elements is critical. Chitosan and its nanocomposites emerge as an excellent immobilization matrix on biosensor surface. As a natural polysaccharide, chitosan has many useful characteristics, such as high permeability and mechanical strength, biocompatibility and non‐toxicity, availability, and low cost. Due to the presence of amino and hydroxyl groups on chitosan, chitosan can easily crosslink with a variety of nanomaterials. This investigation of chitosan nanocomposite‐based biosensors presents recent development and innovations in the preparation of chitosan nanocomposites in coordination with biosensors for various bio‐detection applications, including chitosan nanocomposites formed with carbon nanomaterials, various inorganic and biological complexes. These chitosan nanocomposite based biosensors have demonstrated good sensitivity selectivity and stability for the detection of different types of targets ranging from glucose, proteins, DNAs, small biomolecules to bacteria. It is in our hope that this review will offer guidance for the development of novel biosensors and open up opportunities in the field of biosensor research.     

Construction of L‐Lysine Sensor by Layer‐by‐Layer Adsorption of L‐Lysine 6‐Dehydrogenase and Ferrocene‐Labeled High Molecular Weight Coenzyme Derivative on Gold Electrode

A ferrocene‐labeled high molecular weight coenzyme derivative (PEI‐Fc‐NAD) and a thermostable NAD‐dependent L ‐lysine 6‐dehydrogenase (LysDH) from thermophile Geobacillus stearothermophilus were used to fabricate a reagentless L ‐lysine sensor. Both LysDH and PEI‐Fc‐NAD were immobilized on the surface of a gold electrode by consecutive layer‐by‐layer adsorption (LBL) technique. By the simple LBL method, the reagentless L ‐lysine sensor, with co‐immobilization of the mediator, coenzyme, and enzyme was obtained, which exhibited current response to L ‐lysine without the addition of native coenzyme to the analysis system. The amperometric response of the sensor was dependent on the applied potential, bilayer number of PEI‐Fc‐NAD/LysDH, and substrate concentration. A linear current response, proportional to L ‐lysine concentration in the range of 1–120 mM was observed. The response of the sensor to L ‐lysine was decreased by 30% from the original activity after one month storage.     

Catalytic Hairpin Assembly‐Programmed DNA Three‐Way Junction for Enzyme‐Free and Amplified Electrochemical Detection of Target DNA

DNA three‐way junctions (DNA 3WJ) have been widely used as important building blocks for the construction of DNA architectures and dynamic assemblies. Herein, we describe for the first time a catalytic hairpin assembly‐programmed DNA three‐way junction (CHA‐3WJ) strategy for the enzyme‐free and amplified electrochemical detection of target DNA. It takes full advantage of the target‐catalyzed hairpin assembly‐induced proximity effect of toehold and branch‐migration domains for the ingenious execution of the strand displacement reaction to form the DNA 3WJ on the electrode surface. A low detection limit of 0.5 pM with an excellent selectivity was achieved for target DNA detection. The developed CHA‐3WJ strategy also offers distinct advantages of simplicity in probe design and biosensor fabrication, as well as enzyme‐free operation. Thus, it opens a promising avenue for applications in bioanalysis, design of DNA‐responsive devices, and dynamic DNA assemblies.     

Recent Progress on the Development of Biofuel Cells for Self‐Powered Electrochemical Biosensing and Logic Biosensing: A Review

Biofuel cells (BFCs) based on enzymes and microorganisms have been recently received considerable attention because they are recognized as an attractive type of energy conversion technology. In addition to the research activities related to the application of BFCs as power source, we have witnessed recently a growing interest in using BFCs for self‐powered electrochemical biosensing and electrochemical logic biosensing applications. Compared with traditional biosensors, one of the most significant advantages of the BFCs‐based self‐powered electrochemical biosensors and logic biosensors is their ability to detect targets integrated with chemical‐to‐electrochemical energy transformation, thus obviating the requirement of external power sources. Following my previous review (Electroanalysis­ 2012 , 24, 197–209), the present review summarizes, discusses and updates the most recent progress and latest advances on the design and construction of BFCs‐based self‐powered electrochemical biosensors and logic biosensors. In addition to the traditional approaches based on substrate effect, inhibition effect, blocking effect and gene regulation effect for BFCs‐based self‐powered electrochemical biosensors and logic biosensors design, some new principles including enzyme effect, co‐stabilization effect, competition effect and hybrid effect are summarized and discussed by me in details. The outlook and recommendation of future directions of BFCs‐based self‐powered electrochemical biosensors and logic biosensors are discussed in the end.     

A Novel Functionalized Single‐Wall Carbon Nanotube Modified Electrode and Its Application in Determination of Dopamine and Uric Acid in the Presence of High Concentrations of Ascorbic Acid

Multilayer films of negatively charged single‐wall carbon nanotubes (SWCNTs) and positively charged cetylpyridinium bromide (CPB) have been deposited on a glassy carbon electrode (GCE) using layer‐by‐layer (LBL) technique. The assembled multilayer films have been investigated by scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS), and quartz crystal microbalance (QCM) measurements. The voltammetric signal of dopamine (DA), uric acid (UA), and ascorbic acid (AA) could be observed well‐separated with the assembled SWCNTs/CPB multilayer films in pH 7.0 PBS. The oxidation peak potentials of DA, UA, and AA are centered at about 169 mV, 292 mV and ?10 mV on differential pulse voltammograms (DPVs), respectively. The peak‐to‐peak potential separation was 123 mV, 179 mV, and 302 mV for DA‐UA, DA‐AA, and UA‐AA in DPVs, respectively. This permits the simultaneous detection of DA and UA in the presence of AA.     

DNA‐Modified Screen‐Printed Electrodes with Nanostructured Films of Multiwall Carbon Nanotubes,Hydroxyapatite and Montmorillonite

Nanostructured films were deposited at the surface of working electrode of the screen‐printed assembly and utilized for the surface modification with double‐stranded DNA. The basic electrochemical properties of the sensors were investigated using voltammetric methods. Modified electrodes were also characterized by scanning electron microscopy and electrochemical impedance measurements. It was found that the electrode modification with DNA and nanomodifier leads to an enhanced sensitivity of the DNA voltammetric detection. New potentialities of the utilization of the K₃[Fe(CN)₆] cyclic voltammetric signal and electrochemical impedance spectroscopy were found. The DNA‐based biosensors showed good repeability and necessary stability within several days.     

Fabrication of Self‐Assembled Tris(1,10‐phenanthroline) ruthenium/12‐Molybdophosphoric Acid Films with Bifunctional Electrocatalytic and Photoluminescent Properties

The thin films containing transition metal complex tris(1,10‐phenanthroline) ruthenium(II) Ru(phen)₃Cl₂ (abbr Ru(phen)₃, phen=1,10‐phenanthroline), and 12‐molybdophosphoric acid [PMo₁₂O₄₀]_3? (abbr PMo₁₂) were fabricated on quartz, silicon and ITO substrates by layer‐by‐layer (LBL) method. The LBL films were characterized by the UV‐vis spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy and cyclic voltammetry. The films can catalyze both the reduction of ClO , BrO , IO , and the oxidation of C₂O due to the presence of bifunctional composite, and the redox potentials depend on pH as a result of protonation. The photoluminescence of films were also investigated. The films exhibited photoluminescence arising from π*–t_2g ligand‐to‐metal transition of Ru(phen)₃.     

Fabrication of Fe(CN)63− Functionalized PDDA/CdTe Layer‐by‐layer Film with Good Electron Transfer Ability

(PDDA/CdTe)_n layer‐by‐layer (LBL) film immobilized with Fe(CN)₆^3? was fabricated on the gold electrode. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to investigate the electrochemical properties of this film. The peak current of the immobilized Fe(CN)₆^3? increased as the number of the bilayers increased and was proportional to the scan rate. Compared with pure (PDDA/CdTe)_n and (PDDA/PSS)_n LBL film, Fe(CN)₆^3? immobilized (PDDA/CdTe)_n LBL film had good electron transfer ability. The immobility of Fe(CN)₆^3? into the film was attributed to its interaction with Cd²⁺ on the surface of CdTe QDs. Fe(CN)₆^3? also can interact with other metal ions, which would make Fe(CN)₆^3? release from the film. The concentrations of metal ions will affect the CV response of Fe(CN)₆^3? immobilized LBL film. It has provided a novel prototype of device or sensor for quantitative detection of metal ions.     

Silica‐Polyaniline Based Bienzyme Cholesterol Biosensor: Fabrication and Characterization

In the present investigation, silica‐polyaniline based bienzyme cholesterol biosensor is fabricated through a simple one‐step electrochemical method. The one‐step fabrication process involves electrochemical polymerization of N[3‐(trimethoxysilyl)propyl]aniline to result poly(N[3‐(trimethoxysilyl)propyl]aniline) (PTMSPA) and simultaneous immobilization of two enzymes, horseradish peroxidase (HRP) and cholesterol oxidase (ChOx) into PTMSPA matrix. The modified electrode is designated as PTMSPA‐HRP/ChOx‐ME. PTMSPA facilitates direct electron transfer between the electrode surface and the active redox centers of HRP. This enables the operation of a biosensor at a low working potential of about ?150 mV (vs. Ag/AgCl) for the detection of hydrogen peroxide. The PTMSPA‐HRP/ChOx‐ME demonstrates excellent analytical performance for the detection of cholesterol between 1 and 25 mM with high sensitivity and selectivity. PTMSPA possesses features suited for the fabrication of third‐generation biosensors.     

Fabricating of Acetylcholine Biosensor by a Layer‐by‐layer Deposition Technique for Determining Trichlorfon

An acetylcholine (ACh) biosensor has been fabricated with bienzymes/poly(diallyldimethylammonium chloride) (PDDA) multilayer film‐modified platinum (Pt) electrodes by a layer‐by‐layer technique (LBL). The ACh biosensor was optimized and the properties are described. This ACh biosensor was used for the detection of organophosphate pesticide trichlorfon. The detection limits (found 0.001 μg/mL for trichlorfon) make it possible to detect the pollutants. This simple protocol of biosensor preparation, high sensitivity and stability are very promising for the determination of environmental pollutants in field conditions.     

Functionalized Carbon Nanoparticles,Blacks and Soots as Electron‐Transfer Building Blocks and Conduits

Functionalized carbon nanoparticles (or blacks) have promise as novel active high‐surface‐area electrode materials, as conduits for electrons to enzymes or connections through lipid films, or as nano‐building blocks in electroanalysis. With previous applications of bare nanoblacks and composites mainly in electrochemical charge storage and as substrates in fuel cell devices, the full range of benefits of bare and functionalized carbon nanoparticles in assemblies and composite (bio)electrodes is still emerging. Carbon nanoparticles are readily surface‐modified, functionalized, embedded, or assembled into nanostructures, employed in bioelectrochemical systems, and incorporated into novel electrochemical sensing devices. This focus review summarizes aspects of a rapidly growing field and some of the recent developments in carbon nanoparticle functionalization with potential applications in (bio)electrochemical, photoelectrochemical, and electroanalytical processes.     

Carbon‐Nanotube Based Electrochemical Biosensors: A Review

This review addresses recent advances in carbon‐nanotubes (CNT) based electrochemical biosensors. The unique chemical and physical properties of CNT have paved the way to new and improved sensing devices, in general, and electrochemical biosensors, in particular. CNT‐based electrochemical transducers offer substantial improvements in the performance of amperometric enzyme electrodes, immunosensors and nucleic‐acid sensing devices. The greatly enhanced electrochemical reactivity of hydrogen peroxide and NADH at CNT‐modified electrodes makes these nanomaterials extremely attractive for numerous oxidase‐ and dehydrogenase‐based amperometric biosensors. Aligned CNT “forests” can act as molecular wires to allow efficient electron transfer between the underlying electrode and the redox centers of enzymes. Bioaffinity devices utilizing enzyme tags can greatly benefit from the enhanced response of the biocatalytic‐reaction product at the CNT transducer and from CNT amplification platforms carrying multiple tags. Common designs of CNT‐based biosensors are discussed, along with practical examples of such devices. The successful realization of CNT‐based biosensors requires proper control of their chemical and physical properties, as well as their functionalization and surface immobilization.     

Valency‐Controlled Framework Nucleic Acid Signal Amplifiers

Weak ligand–receptor recognition events are often amplified by recruiting multiple regulatory biomolecules to the action site in biological systems. However, signal amplification in in vitro biomimetic systems generally lack the spatiotemporal regulation in vivo. Herein we report a framework nucleic acid (FNA)‐programmed strategy to develop valence‐controlled signal amplifiers with high modularity for ultrasensitive biosensing. We demonstrated that the FNA‐programmed signal amplifiers could recruit nucleic acids, proteins, and inorganic nanoparticles in a stoichiometric manner. The valence‐controlled signal amplifier enhanced the quantification ability of electrochemical biosensors, and enabled ultrasensitive detection of tumor‐relevant circulating free DNA (cfDNA) with sensitivity enhancement of 3–5 orders of magnitude and improved dynamic range.     

Point‐of‐Care Smartphone‐based Electrochemical Biosensing

Point‐of‐care (PoC) biosensors offer promising solutions to today's adverse and costly healthcare issues by moving diagnostic tools closer to the patient. The ubiquity of smartphones has brought about an emergence of PoC devices, which leverage the smartphone's capabilities, enabling the creation of low‐cost and portable biosensors. Electrochemical biosensors are well suited for PoC testing since the transducers can be miniaturized and inexpensively fabricated. This review paper discusses recent developments in smartphone‐based electrochemical biosensors for PoC diagnostics. These peripherals utilize the various connectivity options (for example proprietary ports, audio headphone‐jack, or wireless radio) to offload functionality to the smartphone. The smartphone‐based implementations of various electrochemical techniques, such as amperometry, potentiometry, and impedance spectroscopy are explored. Major challenges include reducing power, area, and cost of measurement circuitry, while maintaining adequate performance for PoC diagnostic applications.