Enantioselective,Potentiometric Membrane Electrodes Based on Cyclodextrins for the Assay of L‐ and D‐2‐Hydroxyglutaric Acid

Abstract

Enantioselective, potentiometric membrane electrodes (EPMEs) based on immobilization of β‐, γ‐cyclodextrin (CD) or 2‐hydroxy‐3‐trimethylammoniopropyl‐β‐cyclodextrin (as chloride salt) (β‐CD‐derivative) in carbon paste have been designed. The β‐CD and β‐CD‐derivative‐based electrodes were applied in the 10^?8–10^?6 and 10^?7–10^?5 mol/L concentration ranges for the determination of L‐2‐hydroxyglutaric acid (L‐2‐HGA), whereas γ‐CD‐based electrode was applied for the determination of D‐2‐hydroxyglutaric acid (D‐2‐HGA) in the concentration range 10^?6–10^?4 mol/L. The β‐CD‐based EPME showed the lowest detection limit (1×10^?9 mol/L). The enantioselectivity and selectivity of the proposed electrodes for the assay of L‐2‐HGA and D‐2‐HGA, respectively, were determined over D‐2‐HGA/L‐2‐HGA, creatine, and creatinine. The proposed EPMEs can be applied for the enantioanalysis of 2‐hydroxyglutaric acid in urine samples.     

Determination of L‐Vesamicol in Serum Samples Using Enantioselective,Potentiometric Membrane Electrodes Based on Antibiotics

Abstract

Enantioselective, potentiometric membrane electrodes (EPMEs) based on antibiotics are proposed for the enantioanalysis of L‐vesamicol. A carbon paste was modified with antibiotics (vancomycin, teicoplanin, and teicoplanin modified with acetonitrile), as chiral selectors. The EPMEs based on antibiotics were reliably used for enantiopurity tests of L‐vesamicol using the direct potentiometric technique. The following linear concentration ranges: 1.0×10^?6–1.0×10^?4, 1.0×10^?6–1×10^?3 and 1×10^?7?1×10^?2 mol/L; and detection limits: 1.1×10^?7, 9.6×10^?8, and 3.6×10^?8 mol/L were determine for vancomycin, teicoplanin, and teicoplanin modified with acetonitrile–based EPMEs, respectively. The proposed EPMEs were applied for the enantioanalysis of L‐vesamicol in urine samples.     

Utilization of Maltodextrin‐Based Enantioselective,Potentiometric Membrane Electrodes for the Enantioselective Assay of S‐Flurbiprofen

Abstract

Three enantioselective, potentiometric membrane electrodes (EPMEs) based on carbon paste impregnated with different maltodextrins [dextrose equivalent (DE) (DE 4.0–7.0 (I), 13–17 (II), 16.5–19.5 (III)], were proposed as chiral selectors for the assay of S‐flurbiprofen raw materials and from its pharmaceutical formulation, Froben 100^® tablets. The best response and enantioselectivity were obtained when maltodextrin with lower DE was used for the electrode design. The three EPMEs showed very low detection limits. The surfaces of the electrodes are easily renewable by simply polishing on an alumina paper.     

Enantioanalysis of S-Ketoprofen Using Enantioselective,Potentiometric Membrane Electrodes

Abstract

Maltodextrins with different dextrose equivalent (DE) values (maltodextrin I: DE 4.0–7.0; maltodextrin II: DE 13.0–17.0; maltodextrin III: DE 16.5–19.5) were used for the design of three enantioselective, potentiometric membrane electrodes (EPMEs) for the assay of S-ketoprofen. The linear concentration ranges for the proposed electrodes were 10^?10 to 10^?8, 10^?9 to 10^?5, and 10^?10 to 10^?7 mol/L, with slopes of 58.0, 58.67, and 58.93 mV/decades of concentration and limits of detection of 1.49 × 10^?8, 2.43 × 10^?8, and 4.19 × 10^?11 mol/L for EPMEs based on maltodextrin I, II, and III, respectively. The EPMEs showed high reliability and effectiveness for the enantioanalysis of S-ketoprofen raw material and its pharmaceutical formulations.     

Cyclodextrin Modified Carbon Paste Based Electrodes as Sensors for the Determination of Carcinogenic Polycyclic Aromatic Amines

Voltammetric properties and possibility of the determination of carcinogenic aminoderivatives of polycyclic aromatic hydrocarbons, namely 1‐ and 2‐aminonaphthalene and 2‐aminobiphenyl, have been investigated. Carbon paste electrodes (CPE) modified with monomeric α‐, β‐ or γ‐cyclodextrin and carbon‐based screen‐printed electrodes (SPE) surface‐modified with a thin film of β‐cyclodextrin (β‐CDP) or carboxymethylated β‐cyclodextrin (β‐CDPA) condensation polymer were used for that purpose as simple electrochemical biosensors. Analytical procedure for the DPV determination of tested amines using these biosensors was proposed. Linear calibration plots within the concentration range of 2×10^?8 – 2×10^?7 mol dm^?3 and 2×10^?7–1×10^?6 mol dm^?3 with limits of quantification of the order of 10^?9 mol dm^?3 were obtained for the modified CPE and modified SPE.     

Enantioanalysis of l-2-hydroxyglutaric acid in urine samples using enantioselective, potentiometric membrane electrodes based on maltodextrins

Quantitative assay of l-2-hydroxyglutaric acid (l-2-HGA) is important for the diagnosis of l-2-hydroxyglutaric aciduria. Three enantioselective, potentiometric membrane electrodes (EPMEs) based on maltodextrins with different dextrose equivalent (DE) (DE: 4.0-7.0 (I), 13.0-17.0 (II), 16.5-19.5 (III)), were designed for the enantioanalysis of l-2-HGA. The enantioselective, potentiometric membrane electrodes can be used reliably for enantiopurity assay of l-2-HGA using the direct potentiometric method in the ranges of 10⁻⁹-10⁻⁵, 10⁻⁶-10⁻³ and 10⁻⁸-10⁻⁵ mol L⁻¹ for the enantioselective, potentiometric membrane electrodes based on maltodextrins I, II and III, respectively, with very low detection limits. A high reliability was obtained when the electrodes were used for the assay of l-2-HGA in urine samples.     

Macrocyclic antibiotics as chiral selectors in the design of enantioselective, potentiometric membrane electrodes for the determination of l- and d-enantiomers of methotrexate

Three enantioselective, potentiometric membrane electrodes (EPMEs) based on macrocyclic glycopeptide antibiotics—vancomycin and teicoplanin (modified or not with acetonitrile)—were proposed for the determination of l- and d-enantiomers of methotrexate (Mtx). The linear concentration ranges for the proposed enantioselective membrane electrodes were between 10⁻⁶ and 10⁻³ mol l⁻¹ for l- and d- methotrexate. The slopes of the electrodes were 58.00 mV/pl-Mtx for vancomycin-based electrode; 57.60 mV/pd-Mtx for teicoplanin-based electrode and 55.40 mV/pd-Mtx for teicoplanin modified with acetonitrile-based electrode. The detection limits of the proposed electrodes were of 10⁻⁸ mol l⁻¹ magnitude order. The surfaces of the electrodes are stable and easily renewable by polishing on alumina paper. All proposed electrodes proved to be successful for the determination of the enantiopurity of Mtx as raw material and of its pharmaceutical formulations (tablets and injections).     

Electrochemical Studies of Inclusion Complex Formed Between Glutathione and β‐cyclodextrin‐modified Carbon Electrodes and its Application for Determination of Glutathione

In this work, the electrochemical determination of glutathione (GSH) using β‐cyclodextrin (β‐CD) modified carbon electrodes was carried out. Different methodologies were used to modify the electrodes. In the first part of this paper, we analyze and compare the ability of the electrodes to determine GSH using the different β‐CD‐modified electrodes and cyclic voltammetry. We found that the carbon paste electrode modified by potential sweeping was the best electrode for GSH determination; in addition, we found that an inclusion complex formed between β‐CD deposited on the electrode surface and GSH. The formation constant for this complex was 2498.54 M^?1 at 25 °C. Furthermore, we have also calculated thermodynamic parameters for the formation of the inclusion complex. In the second part of this paper, we analyze the effect of sweep rate and pH on the determination of GSH. The best results were obtained at a rate of 50 mV s^?1 and a pH of 2.2. The β‐CD‐modified carbon paste electrode exhibits a linear response in a concentration range of 20 to 157 µM with a sensitivity of 1083.65 µA mM^?1cm^?2 and a detection limit of 3.92 µM. Finally, the electrode was used to determine the GSH concentration in Eichhornia crassipes root extract, and the concentration determination accuracy was validated by a well‐known spectroscopic method.     

Utilization of maltodextrin based enantioselective, potentiometric membrane electrodes for the enantioselective assay of S-perindopril

Enantioselective, potentiometric membrane electrodes (EPMEs) based on carbon paste impregnated with different maltodextrins {dextrose equivalent (DE) 4.0-7.0 (I), 13.0-17.0 (II) and 16.5-19.5 (III)} as chiral selectors for the assay of S-perindopril is described. The proposed electrodes could be reliably employed in the assay of S-perindopril raw material and from its pharmaceutical formulation, Coversyl^® tablets. The electrode based on maltodextrin (I) showed the best enantioselectivity and time-stability. The surfaces of the electrodes are easily renewable by simply polishing on an alumina paper.     

Enantioanalysis of L-Histidine Using Enantioselective,Potentiometric Membrane Electrodes Based on Maltodextrins

Three enantioselective, potentiometric electrodes (EPMEs) based on maltodextrins with different values of dextrose equivalent (DE) (maltodextrin I: DE 4.0–7.0; maltodextrin II: DE 13–17; maltodextrin III DE 16.5–19.5) were proposed for the assay of L-histidine in histidine raw materials and from its pharmaceutical formulation. The slopes of the electrodes were 58.3, 58.9, and 58.5 mV/decade of concentration for maltodextrin I, II, and III-based electrodes, respectively, and the detection limits were 1.97 × 10^?12 mol/L, 1.72 × 10^?12 mol/L, and 1.4 × 10^?11 mol/L, respectively. All the electrodes are enantioselective and selective over polyvinylpyrrolidone, creatine, and creatinine. The L-histidine can be determined in the presence of D-histidine with recovery values higher than 99.10%. The proposed electrodes were successfully used for uniformity content tests of L-histidine in food supplements; the average recovery was higher than 97.30%. The surfaces of the electrodes were stable and easily renewable by simply polishing the alumina paper.     

β‐Co(OH)2 Nanosheets: A Superior Pseudocapacitive Electrode for High‐Energy Supercapacitors

In this work, β‐Co(OH)₂ nanosheets are explored as efficient pseudocapacitive materials for the fabrication of 1.6 V class high‐energy supercapacitors in asymmetric fashion. The as‐synthesized β‐Co(OH)₂ nanosheets displayed an excellent electrochemical performance owing to their unique structure, morphology, and reversible reaction kinetics (fast faradic reaction) in both the three‐electrode and asymmetric configuration (with activated carbon, AC). For example, in the three‐electrode set‐up, β‐Co(OH)₂ exhibits a high specific capacitance of ∼675 F g⁻¹ at a scan rate of 1 mV s⁻¹. In the asymmetric supercapacitor, the β‐Co(OH)₂∥AC cell delivers a maximum energy density of 37.3 Wh kg⁻¹ at a power density of 800 W kg⁻¹. Even at harsh conditions (8 kW kg⁻¹), an energy density of 15.64 Wh kg⁻¹ is registered for the β‐Co(OH)₂∥AC assembly. Such an impressive performance of β‐Co(OH)₂ nanosheets in the asymmetric configuration reveals the emergence of pseudocapacitive electrodes towards the fabrication of high‐energy electrochemical charge storage systems.     

Electrocatalytic and Analytical Response of β‐Cyclodextrin Incorporated Carbon Nanotubes‐Modified Electrodes Toward Guanine

The utility of β‐cyclodextrin incorporated carbon nanotubes‐modified electrodes (β‐CD/CNT/E) for electrocatalytic oxidation of guanine in aqueous solution is demonstrated. Compared to the conventional electrode, it lowers the overpotential and enhances the peak current significantly. The action mechanism of β‐CD/CNT/E was discussed systemically. The results demonstrated that the use of β‐CD/CNT/E clearly provides an effective methodology for the determination of guanine. Based on the signal of guanine, an estimate of DNA concentration can be recognized with a limit of detection of 10 ng mL^?1.     

Monomers for adhesive polymers. XV. Synthesis,photopolymerization, and adhesive properties of polymerizable β‐ketophosphonic acids

The novel polymerizable β‐ketophosphonic acids 4 , 8 , 10 , and 16 as well as the 9‐(methacryloyloxy)‐nonylphosphonic acid 20 were synthesized in four to eight steps. They were characterized by ¹H NMR, ¹³C NMR, and ³¹P NMR spectroscopy and by high‐resolution mass spectra. The free‐radical polymerization of 4 , 8 , 10 , and 16 was carried out in a water/ethanol solution, using 2,2′‐azo(2‐methylpropionamidine)dihydrochloride as initiator. To evaluate the reactivity of the acidic monomers 4 , 8 , 10 , 16 , and 20 , their photopolymerization behavior was investigated by photodifferential scanning calorimeter. Copolymerizations with 2‐hydroxyethyl methacrylate, glycol dimethacrylate, and N,N′‐diethyl‐1,3‐bis‐(acrylamido)propane were studied. The homopolymerization of the corresponding β‐ketophosphonates and their copolymerization with hydroxyethyl methacrylate were also carried out. Self‐etch adhesives based on the β‐ketophosphonic acids 4 , 8 , 10 , and 16 were able to provide high shear bond strengths (SBSs) of dimethacrylate‐based composite to dentin and enamel. The β‐ketophosphonic acid 8 was also shown to exhibit significantly better adhesive properties than the corresponding phosphonic acid 20 . Indeed, the presence of the carbonyl moiety in the β‐position of the phosphonic acid group led to a strong improvement of the composite SBS to dentin and enamel. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3550–3563     

Mixed Aza‐Thioether Crowns Containing a 1,10‐Phenanthroline Sub‐Unit as Neutral Ionophores for Silver Ion

Three different recently synthesized aza‐thioether crowns containing a 1,10‐phenanthroline sub‐unit (L1–L3) and a corresponding acyclic ligand (L4) were studied to characterize their abilities as silver ion ionophores in PVC‐membrane electrodes. Novel conventional silver‐selective electrodes with internal reference solution (CONISE) and coated graphite‐solid contact electrodes (SCISE) were prepared based on one of the 15‐membered crowns containing two donating S atoms and two phenanthroline‐N atoms (L1). The electrodes reveal a Nernstian behavior over wide Ag⁺ ion concentration ranges (1.0×10^?5?1.0×10^?1 M for CONISE and 5.0×10^?8?4.0×10^?2 M for SCISE) and very low limits of detection (8.0×10^?6 M for CONISE and 3.0×10^?8 M for SCISE). The potentiometric response is independent from pH of the solution in the pH range 3.0–8.0. The electrodes manifest advantages of low resistance, very fast response and, most importantly, good selectivities relative to a wide variety of other cations. The electrodes can be used for at least 2 months (for CONISE) and 4 months for (SCISE) without any appreciable divergence in potentials. The electrodes were used as an indicator electrode in the potentiometric titration of Ag⁺ ion and in the determination of silver in photographic emulsions and in radiographic and photographic films.     

A Designed Three‐Stranded β‐Sheet in an α/β Hybrid Peptide

The incorporation of β‐amino acid residues into the antiparallel β‐strand segments of a multi‐stranded β‐sheet peptide is demonstrated for a 19‐residue peptide, Boc‐LV^βFV^DPGL^βFVVL^DPGLVL^βFVV‐OMe (BBH19). Two centrally positioned ^DPro–Gly segments facilitate formation of a stable three‐stranded β‐sheet, in which β‐phenylalanine (^βPhe) residues occur at facing positions 3, 8 and 17. Structure determination in methanol solution is accomplished by using NMR‐derived restraints obtained from NOEs, temperature dependence of amide NH chemical shifts, rates of H/D exchange of amide protons and vicinal coupling constants. The data are consistent with a conformationally well‐defined three‐stranded β‐sheet structure in solution. Cross‐strand interactions between ^βPhe3/^βPhe17 and ^βPhe3/Val15 residues define orientations of these side‐chains. The observation of close contact distances between the side‐chains on the N‐ and C‐terminal strands of the three‐stranded β‐sheet provides strong support for the designed structure. Evidence is presented for multiple side‐chain conformations from an analysis of NOE data. An unusual observation of the disappearance of the Gly NH resonances upon prolonged storage in methanol is rationalised on the basis of a slow aggregation step, resulting in stacking of three‐stranded β‐sheet structures, which in turn influences the conformational interconversion between type I′ and type II′ β‐turns at the two ^DPro–Gly segments. Experimental evidence for these processes is presented. The decapeptide fragment Boc‐LV^βFV^DPGL^βFVV‐OMe (BBH10), which has been previously characterized as a type I′ β‐turn nucleated hairpin, is shown to favour a type II′ β‐turn conformation in solution, supporting the occurrence of conformational interconversion at the turn segments in these hairpin and sheet structures.     

Highly Selective Chromium(III) PVC‐Membrane Electrodes Based on Some Recently Synthesized Schiff's Bases

Three recently synthesized Schiff's bases were studied to characterize their ability as Cr³⁺ ion carrier in PVC‐membrane electrodes. The polymeric membrane (PME) and coated glassy carbon (CGCE) electrodes based on 2‐hydroxybenzaldehyde‐O,O′‐(1,2‐dioxetane‐1,2‐diyl) oxime (L1) exhibited Nernstian responses for Cr³⁺ ion over wide concentration ranges (1.5×10^?6–8.0×10^?3 M for PME and 4.0×10^?7–3.0×10^?3 M for CGCE) and very low limits of detection (1.0×10^?6 M for PME and 2.0×10^?7 M for CGCE). The proposed potentiometric sensors manifest advantages of relatively fast response and, most importantly, good selectivities relative to a wide variety of other cations. The selectivity behavior of the proposed Cr³⁺ ion‐selective electrodes revealed a considerable improvement compared to the best previously PVC‐membrane electrodes for chromium(III) ion. The potentiometric responses of the electrodes are independent of pH of the test solution in the pH range 3.0–6.0. The electrodes were successfully applied to determine chromium(III) in water samples.     

Crown Ethers Bearing 18C6 Unit; Sensory Molecules for Fabricating PVC Membrane Lead Ion‐selective Electrodes

Crown ethers bearing 18C6 unit 18‐crown‐6 (18C6), dicyclohexyl18‐crown‐6 (DC18C6) and dibenzo18‐crown‐6 (DB18C6) have been examined as ion sensing materials for fabricating lead ion‐selective potentiometric sensors. Best performance of the electrode based upon 18C6 ionophore was achieved by using a membrane including 9% ionophore, 30% polyvinyl chloride (PVC), 2% oleic acid and 59% dibutylphthalate (DBP). The optimum composition for the sensors based on DC18C6 and DB18C6 was provided by the compositions: 9% DC18C6, 30% PVC, 1.5% sodium tetraphenyl borate (NaTBP), 59.5% DBP; and 5.9% DB18C6, 29.7% PVC, 2.5% NaTBP and 61.9% DBP, respectively. The linear response range of the electrode based on 18C6 (1 × 10^‐6‐1 × 10^‐3 M) differs from that presented by the DC18C6‐ and DB18C6‐based electrodes (1 × 10^‐5‐1 × 10^‐2 M). All the sensors were shown rapid response time (<12 s). The detection limit of the electrodes varies as 5.6 × 10^‐7, 6.3 × 10^‐6 and 7.1 × 10^‐6 M, for 18C6‐, DC18C6‐ and DB18C6‐based electrodes, respectively. The selectivity of the electrodes towards lead ions over some mono‐, di‐ and trivalent metal ions was evaluated. The lifetime of the electrode based on DC18C6 or DB18C6 ionophores was found to be more than three months, while it was shorter for 18C6‐based electrode. The application of the electrodes in aqueous samples was assessed.     

Fluorescence Dynamics of Monocyclodextrin– and Bis(thiol‐cyclodextrin)–Coumarin C153 Complexes

The solvation and confinement of coumarin C153 within supramolecular host/guest complexes based on β‐cyclodextrin (β‐CD) and 6‐deoxy‐6‐thio‐β‐cyclodextrin (β‐CD‐SH) in water are studied by fluorescence spectroscopy. For β‐CD/C153, the 1:1 complex is proposed, and for β‐CD‐SH/C153 both the 1:1 and 2:1 complexes are believed to be formed. The 2:1 β‐CD‐SH/C153 complex has an association constant of 4.2×10⁵ M ^?1 and a C153 population of 82 %, which are interestingly high values, indicating that the proposed β‐CD‐SH dimers structure are connected by covalent disulfide bonds; this is supported by mass spectrometry. Solvation related to fast hydrogen‐bond rearrangement as a part of fluorescence relaxation is determined by the ultrafast components of time‐resolved spectroscopy to be 3 and 7 ps for the 1:1 β‐CD/C153 and 2:1 β‐CD‐SH/C153 complexes, respectively.     

A New Approach for Decreasing the Detection Limit of Gentamicin Ion‐selective Electrodes by Incorporation of Multiwall Carbon Nanotubes (MWCNTs)/Lipophilic Anionic Additives

Two novel carbon paste electrodes based on gentamicin‐reineckate (GNS‐RN)/multiwall carbon nanotubes (MWCNTs)/sodium tetraphenyl borate (NaTPB) or potassium tetraphenylborate (KTPB) for potentiometric determination of gentamicin sulfate were constructed. Our endeavors of lowering the detection limit for gentamicin ion‐selective electrodes were described. The paper focused on gentamicin carbon paste electrodes based on GNS‐RN as electroactive material, o ‐nitrophenyloctyl ether (o ‐NPOE) as plasticizer and incorporation of MWCNTs and lipophilic anionic additives (NaTPB and KTPB) which lower the detection limit of the electrodes showing best results for determination of gentamicin ion. The characteristics of the electrodes, GNS‐RN+NaTPB+MWCNTs (sensor 1) and GNS‐RN+KTPB+ MWCNTs (sensor 2), were measured, showing favorable features as they provided measurements of the potential with near‐Nernstian slopes of 29.6±0.3 and 29.1±0.3 mV/decade over the concentration range of 1.0×10⁻⁶–1.0×10⁻² mol L⁻¹ and pH ranges 3.0–8.2 and 3.0–8.0 in short response times (6.5 sec). Importantly, the electrodes had low detection limits of 3.0×10⁻⁷and 3.4×10⁻⁷ mol L⁻¹ for the two sensors, respectively. The sensors showed high selectivity for gentamicin ion with respect to a large number of interfering species. The electrodes were successfully applied for the potentiometric determination of GNS ions in pure state, pharmaceutical preparations and human urine with high accuracy and precision. The results of this study were compared with some previously published data using other analytical methods.     

Studies on the non‐covalent interactions between cyclodextrins and aryl alkanol piperazine derivatives by mass spectrometry and fluorescence spectroscopy

The non‐covalent complexes of α‐ and β‐cyclodextrins (α‐, β‐CDs) with two aryl alkanol piperazine derivatives (Pipe I and Pipe II) have been studied by electrospray ionization mass spectrometry (ESI‐MS) and fluorescence spectroscopy. The ESI‐MS experimental results demonstrated that Pipe I can conjugate to β‐CD and form 1:1 or 1:2 stoichiometric non‐covalent complexes, and Pipe II can only form 1:1 complexes with α‐ or β‐CD. Fluorescence spectra indicated that the fluorescence intensities of Pipe I and Pipe II can be enhanced by increasing the content of β‐CD. The mass spectrometric titration experiments showed that the dissociation constants K_d1 were 5.77 and 9.52 × 10^?4 mol L^?1 for the complexes of α‐CD with Pipe I and Pipe II, respectively, revealing that the binding of α‐CD‐Pipe I was stronger than α‐CD‐Pipe II. The K_d1 and K_d2 values were 9.81 × 10^?4 mol L^?1 and 1.11 × 10^?7 (mol L^?1)² for 1:1 and 1:2 complexes of Pipe I with β‐CD, respectively. The K_d values obtained from fluorescence spectroscopy were in agreement with those from ESI‐MS titration. Copyright © 2010 John Wiley & Sons, Ltd.