Determination of DNA Hypermethylation Using Anti‐cancer Drug‐Temozolomide

An electrochemical drug‐DNA biosensor was developed for the detection of interaction between the anti‐cancer drug, Temozolomide (TMZ), and DNA sequences by using Differential Pulse Voltammetry at the graphite electrode surfaces. TMZ is a pro‐drug and an alkylating agent that crosses the blood‐brain barrier, so it is mainly used for brain cancers treatment. In this study, we aim to develop a‐proof‐of‐concept study to investigate the effect of TMZ on formerly methylated DNA sequences since TMZ shows its anti‐cancer activity by methylating the DNA. Interaction between TMZ and DNA causes localized distortion of DNA away from an idealized B‐form, resulting in a wider major groove and greater steric accessibility of functional groups in the base of the groove. According to the results, TMZ behaves as a ‘hybridization indicator’ because of its different electrochemical behavior to different strands of DNA. After interaction with TMZ, hybrid (double stranded DNA‐dsDNA) signals decreased dramatically whereas probe (single stranded DNA‐ssDNA) and control signals remain almost unchanged. The signal differences enabled us to distinguish ssDNA and dsDNA without using a label or tag. It is the first study to demonstrate the interaction between the TMZ and dsDNA created from probe and target. We use specific oligonucleotides sequences instead of using long dsDNA sequences.     

Low‐Background,Highly Sensitive DNA Biosensor by Using an Electrically Neutral Cobalt(II) Complex as the Redox Hybridization Indicator

An electrically neutral cobalt complex, [Co(GA)₂(phen)] (GA=glycollic acid, phen=1,10‐phenathroline), was synthesized and its interactions with double‐stranded DNA (dsDNA) were studied by using electrochemical methods on a glassy carbon electrode (GCE). We found that [Co(GA)₂(phen)] could intercalate into the DNA duplex through the planar phen ligand with a high binding constant of 6.2(±0.2)×10⁵ M ^?1. Surface studies showed that the cobalt complex could electrochemically accumulate within the modified dsDNA layer, rather than within the single‐stranded DNA (ssDNA) layer. Based on this feature, the complex was applied as a redox‐active hybridization indicator to detect 18‐base oligonucleotides from the CaMV35S promoter gene. This biosensor presented a very low background signal during hybridization detection and could realize the detection over a wide kinetic range from 1.0×10^?14 M to 1.0×10^?8 M , with a low detection limit of 2.0 fM towards the target sequences. The hybridization selectivity experiments further revealed that the complementary sequence, the one‐base‐mismatched sequence, and the non‐complementary sequence could be well‐distinguished by the cobalt‐complex‐based biosensor.     

Label‐Free and Label Based Electrochemical Detection of Hybridization by Using Methylene Blue and Peptide Nucleic Acid Probes at Chitosan Modified Carbon Paste Electrodes

A chitosan modified carbon paste electrode (ChiCPE) based DNA biosensor for the recognition of calf thymus double stranded DNA (dsDNA), single stranded DNA (ssDNA) and hybridization detection between complementary DNA oligonucleotides is presented. DNA and oligonucleotides were electrostatically attached by using chitosan onto CPE. The amino groups of chitosan formed a strong complex with the phosphate backbone of DNA. The immobilized probe could selectively hybridize with the target DNA to form hybrid on the CPE surface. The detection of hybridization was observed by using the label‐free and label based protocols. The oxidation signals of guanine and adenine greatly decreased when a hybrid was formed on the ChiCPE surface. The changes in the peak currents of methylene blue (MB), an electroactive label, were observed upon hybridization of probe with target. The signals of MB were investigated at dsDNA modified ChiCPE and ssDNA modified ChiCPE and the increased peak currents were observed, in respect to the order of electrodes. The hybridization of peptide nucleic acid (PNA) probes with the DNA target sequences at ChiCPE was also investigated. Performance characteristics of the sensor were described, along with future prospects.     

Impedance DNA Biosensor Using Electropolymerized Polypyrrole/Multiwalled Carbon Nanotubes Modified Electrode

In this paper, we present an electrochemical impedance‐based DNA biosensor by using a composite material of polypyrrole (PPy) and multiwalled carbon nanotubes (MWNTs) to modify glassy carbon electrode (GCE). The polymer film was electropolymerized onto GCE by cyclic voltammetry (CV) in the presence of carboxylic groups ended MWNTs (MWNTs‐COOH). Such electrode modification method is new for DNA hybridization sensor. Amino group ended single‐stranded DNA (NH₂‐ssDNA) probe was linked onto the PPy/MWNTs‐COOH/GCE by using EDAC, a widely used water‐soluble carbodiimide for crosslinking amine and carboxylic acid group. The hybridization reaction of this ssDNA/PPy/MWNTs‐COOH/GCE resulted in a decreased impedance, which was attributed to the lower electronic transfer resistance of double‐stranded DNA than single‐stranded DNA. As the result of the PPy/MWNTs modification, the electrode obtained a good electronic transfer property and a large specific surface area. Consequently, the sensitivity and selectivity of this sensor for biosensing DNA hybridization were improved. Complementary DNA sequence as low as 5.0×10^?12 mol L^?1 can be detected without using hybridization marker or intercalator. Additionally, it was found that the electropolymerization scan rate was an important factor for DNA biosensor fabrication. It has been optimized at 20 mV s^?1.     

An Electrochemical DNA Sensor Based on Electrodepositing Aluminum Ion Films on Stearic Acid‐Modified Carbon Paste Electrode and Its Application for the Detection of Specific Sequences Related to Bar Gene and CP4 Epsps Gene

An electrochemical DNA biosensor was fabricated by immobilizing DNA probe on aluminum ion films that were electrodeposited on the surface of the stearic acid‐modified carbon paste electrode (CPE). DNA immobilization and hybridization were characterized with cyclic voltammetry (CV) by using methylene blue (MB) as indicator. MB has a couple of well‐defined voltammetric redox peaks at the CPE. The currents of redox peaks of MB decreased after depositing aluminum ion films on the CPE (Al(III)/CPE) and increased dramatically after immobilizing DNA probe (ssDNA/Al(III)/CPE). Hybridization of DNA probe led to a marked decrease of the peak currents of MB, which can be used to detect the target single‐stranded DNA. The conditions for the preparation of Al(III)/CPE, and DNA immobilization and hybridization were optimized. The specific sequences related to bar transgene in the transgenic corn and the PCR amplification of CP4 epsps gene from the sample of transgenic roundup ready soybean were detected by differential pulse voltammetry (DPV) with this new electrochemical DNA biosensor. The difference between the peak currents of MB at ssDNA/Al(III)/CPE and that at hybridization DNA modified electrode (dsDNA/Al(III)/CPE) was applied to determine the specific sequence related to the target bar gene with the dynamic range comprised between 1.0×10^?7 mol/L to 1.0×10^?4 mol/L. A detection limit of 2.25×10^?8 mol/L of oligonucleotides can be estimated.     

Lable‐Free Electrochemical DNA Sensor Based on Gold Nanoparticles/Poly(neutral red) Modified Electrode

We present a new strategy for the label‐free electrochemical detection of DNA hybridization based on gold nanoparticles (AuNPs)/poly(neutral red) (PNR) modified electrode. Probe oligonucledotides with thiol groups at the 5‐end were covalently linked onto the surface of AuNPs/PNR modified electrode via S‐Au binding. The hybridization event was monitored by using differential pulse voltammetry (DPV) upon hybridization generates electrochemical changes at the PNR‐solution interface. A significant decrease in the peak current was observed upon hybridization of probe with complementary target ssDNA, whereas no obvious change was observed with noncomplementary target ssDNA. And the DNA sensor also showed a high selectivity for detecting one‐mismatched and three‐mismatched target ssDNA and a high sensitivity for detecting complementary target ssDNA, the detection limit is 4.2×10^?12 M for complementary target ssDNA. In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA‐hybridization conditions.     

Direct Detection of DNA and DNA‐Ligand Interaction by Impedance Spectroscopy

In this work we present an impedimetric detection system for DNA‐ligand interactions. The sensor system consists of thiol‐modified single‐stranded DNA chemisorbed to gold. Impedance measurements in the presence of the redox system ferri‐/ferrocyanide show an increase in charge transfer resistance (R_ct) after hybridisation of a complementary target. Different amounts of capture strands, used for gold electrode modification, result in surface coverages between 3 and 15 pmol/cm² ssDNA. The relative change in R_ct upon hybridisation increases with increasing amount of capture probe on the electrode from 1.5‐ to 4.5‐fold. Impedimetric detection of binding events of a metal‐intercalator ([Ru(phen)₃]²⁺) and a groove binder (spermine) to double‐stranded DNA is demonstrated. Binding of [Ru(phen)₃]²⁺ and spermine exhibits a decrease in charge transfer resistance. Here, the ligand’s interaction leads to electrostatic shielding of the negatively charged DNA backbone. The impedance changes have been evaluated in dependence on the concentration of both DNA binders. Furthermore, the association of a single‐stranded binding protein (SSBP) is found to cause an increase in charge transfer resistance only when incubated with single‐stranded DNA. The specific binding of an anti‐dsDNA antibody to the dsDNA‐modified electrode surface decreases in contrast the interfacial impedance.     

Application of diazo-thiourea and gold nano-particles in the design of a highly sensitive and selective DNA biosensor

An effective procedure for constructing a DNA biosensor is developed based on covalent immobilization of NH_2 labeled,single strand DNA(NH_2-ssDNA) onto a self-assembled diazo-thiourea and gold nanoparticles modified Au electrode(diazo-thiourea/GNM/Au).Gold nano-particles expand the electrode surface area and increase the amount of immobilized thiourea and single stranded DNA(ssDNA) onto the electrode surface.Diazo-thiourea film provides a surface with high conductibility for electron transfer and a bed for the covalent coupling of NH_2-ssDNA onto the electrode surface.The immobilization and hybridization of the probe DNA on the modified electrode is studied by differential pulse voltammetry(DPV) using methylene blue(MB) as a well-known electrochemical hybridization indicator.The linear range for the determination of complementary target ssDNA is from 9.5(±0.1) × 10~(-13) mol/L to1.2(±0.2) x 10~(-9) mol/L with a detection limit of 1.2(±0.1) 10~(-13) mol/L.     

Determination of Electrochemical Interaction between 2‐(1H‐benzimidazol‐2‐yl) Phenol and DNA Sequences

A benzimidazole derivate, 2‐(1H‐benzimidazol‐2‐yl) phenol (2‐Bip) and its interaction mechanism with sequence specific DNA was examined with Differential Pulse Voltammetry (DPV). We, for the first time, investigated the effect of 2‐Bip on sequence specific DNA with electrochemical methods by evaluating both guanine and 2‐Bip oxidation signal changes. In the study, probe sequences were immobilized to the surface of the electrodes and then hybridization was achieved by sending the complementary target onto the probe modified electrodes. Following the hybridization, 2‐Bip solution was interacted with probe and hybrid sequences to see the effect of 2‐Bip on different DNA sequences. The binding constant (K), toxicity (S%) and thermodynamic parameters, i. e., Gibbs free energy (ΔG°) of 2‐Bip‐DNA complexes were evaluated. K was calculated as 5×10⁵ and the change in the ΔG° was found as ?32.50 kJ mol^?1, which are consistent well with the literature. Furthermore, S% showed that 2‐Bip is moderately toxic to single stranded DNA (ssDNA) and toxic to double stranded DNA (dsDNA). From our experimental data, we made four conclusions (i) 2‐Bip affects both ssDNA and dsDNA, (ii) 2‐Bip interaction mode with DNA could be non‐covalent interactions, (iii) 2‐Bip could be used as new DNA hybridization indicator due to its distinct effects on ssDNA and dsDNA, (iv) 2‐Bip could be used as a drug molecule for its DNA effect.     

Modeling of DNA hybridization detection using methylene blue as an electroactive label

Mathematical modeling of methylene blue (MB) signal in ssDNA and dsDNA on pencil graphite electrode is described. A DNA biosensor was developed based on MB signal. The probe and target DNAs were 20 mer oligonucleotides corresponding to consensus sequence of HPV major capsid protein L1 gene. Hybrids of various complementary and non-complementary oligonucleotides with the probe were considered as dsDNA with different hybridization degrees. Modeling was developed by incorporation of only the stable forms of dsDNA hybrids. Effect of hybridization degree on current signal in various forms was studied. A factor named AHP (Average Hybridization Percentage) for verifying the hybridization events was defined. Results showed that there is a significant mathematical relation between the calculated AHP and MB signals.     

CtrA gene based electrochemical DNA sensor for detection of meningitis

Electrochemical DNA sensor has been fabricated by immobilizing thiolated single stranded oligonucleotide (ssDNA) probe onto gold (Au) coated glass electrode for meningitis detection using hybridization with complementary DNA (CtrA) in presence of methylene blue (MB). These electrodes (ssDNA/Au and dsDNA/Au) have been characterized using atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), electrochemical impedance spectroscopy (EIS) and cyclic voltammetric (CV) technique. The DNA/Au electrode can detect the complementary DNA in the range of 7–42 ng/μl in 5 min (hybridization) with response time 60 s and electrode is stable for about 4 months when stored at 4 °C. The sensitivity of dsDNA/Au electrode is 115.8 μA/ng with 0.917 regression coefficient (R).     

An Electropolymerized Membrane Biosensor for Speciffic DNA Recognition

A sensitive electrochemical biosensor for detecting the sequence of short DNA oligomers is represented. The biosensor is based on a platinum electrode covered a polymerized membrane of conductive monomer N‐[6‐(thien‐3‐yl)acetoxy]‐pyrrolidine‐2, 5‐dione (TAPD). The membrane of TAPD immobilizes a probe DNA on the electrode. The hybridization of the probe with a sequence‐specific DNA in sample solutions is monitored by a self‐synthesized electroactive indicator, which specifically intercalates in the hybrids on the electrode surface. The current signal of the biosensor is proportional to the concentration of the target DNA in samples, and a very low detection limit of 5 × 10^?10 mol/L is found. The biosensor has been used to detect the short oligomers containing of HTV‐1 and mycobacterrium nucleotide sequences.     

Investigation of Metal Ion Effect on Specific DNA Sequences and DNA Hybridization

In this article, we investigated the sequence specific interaction of single (ssDNA) and double stranded (dsDNA) with silver ions (Ag⁺) with electrochemical methods. We, for the first time, examined the effect of base sequences, base content and physiochemical properties of different DNA sequences on interaction with Ag⁺ in detail. We used different base contents to show how the composition of nucleic acid influences the electrochemical signals. We first immobilized ssDNA probes on bare graphite electrodes. Then, we showed the sequence effect on oxidation signals of AgDNA complex by sensing Ag⁺ to the probe coated surfaces to interact with different ssDNA sequences. Furthermore, we investigated the effect of Ag⁺ on dsDNA. We measured the oxidation signals obtained from Ag⁺‐ssDNA and Ag⁺‐dsDNA complex at approximately 0.2 V and 1.0 V (vs Ag/AgCl), respectively with Differential Pulse Voltammetry (DPV). We showed that the oxidation signals of the AgDNA complex obtained from dsDNA‐modified electrodes is higher than the electrodes modified with ssDNA. More importantly, we showed that Ag⁺‐ssDNA and Ag⁺ ion‐dsDNA exhibit different electrochemical behaviors.     

Label‐Free Detection of Nanomolar Unmodified Single‐ and Double‐Stranded DNA by Using Surface‐Enhanced Raman Spectroscopy on Ag and Au Colloids

Unlabelled single‐ and double‐stranded DNA (ssDNA and dsDNA, respectively) has been detected at concentrations ≥10^?9 M by surface‐enhanced Raman spectroscopy. Under appropriate conditions the sequences spontaneously adsorbed to the surface of both Ag and Au colloids through their nucleobases; this allowed highly reproducible spectra with good signal‐to‐noise ratios to be recorded on completely unmodified samples. This eliminated the need to promote absorption by introducing external linkers, such as thiols. The spectra of model ssDNA sequences contained bands of all the bases present and showed systematic changes when the overall base composition was altered. Initial tests also showed that small but reproducible changes could be detected between oligonucleotides with the same bases arranged in a different order. The spectra of five ssDNA sequences that correspond to different strains of the Escherichia coli bacterium were found to be sufficiently composition‐dependent so that they could be differentiated without the need for any advanced multivariate data analysis techniques.     

ssDNA/十八酸修饰碳糊电极的制备及伏安法表征

将石墨粉与十八酸在80 ℃下混合制成表面富含—COOH的基底碳糊电极(SA/CPE), 然后在活化剂N-羟基琥珀酰亚胺(NHS)和1-乙基-3-(3-二甲基氨丙基)碳二亚胺盐酸盐(EDC)存在下将ssDNA固定到电极表面制备ssDNA修饰电极(ssDNA/SA/CPE). 以亚甲基蓝(MB)为指示剂, 用循环伏安法对SA/CPE和ssDNA/SA/CPE进行电化学表征, 发现其在ssDNA/SA/CPE上较在SA/CPE上的氧化峰电流(i_pa)和还原峰电流(i_pc)分别增大1.9倍和1.7倍, 式电势(E_f)负移8 mV. 把ssDNA/SA/CPE放在互补ssDNA溶液中杂交后, MB的i_pa 和i_pc较在SA/CPE上分别增大1.0倍和0.8倍, E_f负移18 mV. 用0.5 mol/L 的NaOH溶液冲洗使电极表面杂交而成的dsDNA变性洗脱, MB的伏安信号几乎与在ssDNA/SA/CPE上一样. i_pc与SA/CPE上固定的ssDNA质量在1.0×10^－7～5.0×10^－6 g范围内成线性关系, 检测限为2.0×10^－9 g (S/N＝3). 这种既廉价又灵敏的电化学生物传感器有望在转基因植物产品检测研究中得到应用.     

基于聚硫堇膜对DNA杂交的直接电化学检测

In this work, the application of a conducting polymer, poly（thionine）, modified electrode as matrix to DNA immobilization as well as transducer to label-free DNA hybridization detection was introduced. The electropolymerization of thionine onto electrode surface was carried out by a simple two-step method, which involved a preanodization of glassy carbon electrode at a constant positive potential in thionine solution following cyclic voltammetry scans in the solution. Electrochemical detection was performed by differential pulse voltammetry in the electroactivity potential domain of poly（thionine）. The resulting poly（thionine） modified electrode showed a good stability and electroactivity in aqueous media during a near neutral pH range. Additionally, the pendant amino groups on the poly（thionine） chains enabled poly（thionine） modified electrode to immobilize phosphate group terminated DNA probe via covalent linkage. Hybridization process induced a clear decrease in poly（thionine） redox current, which was corresponding to the decrease in poly（thionine） electroactivity after double stranded DNA was formed on the polymer film. The detection limit of this electrochemical DNA hybridization sensor was 1.0 × 10^-10mol/L. Compared with complementary sequence, the hybridization signal values of 1-base mismatched and 3-base mismatched samples were 63.9% and 9.2%, respectively.     

Electrochemical Detection of Cecropin CM4 Gene by Single Stranded Probe and Cysteine Modified Gold Electrode

ABSTRACT

A single stranded Cecropin CM4 gene (108 bases) was further immobilized at a cysteine modified gold electrode with the help of water soluble 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC). The ssDNA at the modified electrode could undergo hybridization in a hybridization buffer containing single stranded plasmid pLCM-4SN. A DNA minor groove binder, Hoechst 33258, was employed to discriminate between ssDNA and dsDNA. The anodic waves in differential pulse voltammograms (DPVs), of Hoechst 33258 bound to the DNAs, were used as the indicator. This assay procedure was shown to be rapid, sensitive and precise, thus a kind of prototype DNA biosensor was developed.     

Label-free and sequence-specific DNA detection down to a picomolar level with carbon nanotubes as support for probe DNA

This study describes a simple and label-free electrochemical impedance spectroscopic (EIS) method for sequence-specific detection of DNA by using single-walled carbon nanotubes (SWNTs) as the support for probe DNA. SWNTs are confined onto gold electrodes with mixed self-assembly monolayers of thioethanol and cysteamine. Single-stranded DNA (ssDNA) probe is anchored onto the SWNT support through covalent binding between carboxyl groups at the nanotubes and amino groups at 5′ ends of ssDNA. Hybridization of target DNA with the anchored probe DNA greatly increases the interfacial electron-transfer resistance (R_et) at the double-stranded DNA (dsDNA)-modified electrodes for the redox couple of Fe(CN)₆^3−/4−, which could be used for label-free and sequence-specific DNA detection. EIS results demonstrate that the utilization of SWNTs as the support for probe DNA substantially increases the surface loading of probe DNA onto electrode surface and thus remarkably lowers the detection limit for target DNA. Under the conditions employed here, R_et is linear with the concentration of target DNA within a concentration range from 1 to 10 pM with a detection limit down to 0.8 pM (S/N = 3). This study may offer a novel and label-free electrochemical approach to sensitive sequence-specific DNA detection.     

Electrochemical DNA Biosensor Based on Partially Reduced Graphene Oxide Modified Carbon Ionic Liquid Electrode for the Detection of Transgenic Soybean A2704‐12 Gene Sequence

In this work a partially reduced graphene oxide (p‐RGO) modified carbon ionic liquid electrode (CILE) was prepared as the platform to fabricate an electrochemical DNA sensor, which was used for the sensitive detection of target ssDNA sequence related to transgenic soybean A2704‐12 sequence. The CILE was fabricated by using 1‐butylpyridinium hexafluorophosphate as the binder and then p‐RGO was deposited on the surface of CILE by controlling the electroreduction conditions. NH₂ modified ssDNA probe sequences were immobilized on the electrode surface via covalent bonds between the unreduced oxygen groups on the p‐RGO surface and the amine group at the 5′‐end of ssDNA, which was denoted as ssDNA/p‐RGO/CILE and further used to hybridize with the target ssDNA sequence. Methylene blue (MB) was used as electrochemical indicator to monitor the DNA hybridization. The reduction peak current of MB after hybridization was proportional to the concentration of target A2704‐12 ssDNA sequences in the range from 1.0×10^?12 to 1.0×10^?6 mol/L with a detection limit of 2.9×10^?13 mol/L (3σ). The electrochemical DNA biosensor was further used for the detection of PCR products of transgenic soybean with satisfactory results.     

Electrochemical Biosensor for the Detection of Interaction Between Arsenic Trioxide and DNA Based on Guanine Signal

The interaction of arsenic trioxide (As₂O₃) with calf thymus double‐stranded DNA (dsDNA), calf thymus single‐stranded DNA (ssDNA) and also 17‐mer short oligonucleotide (Probe A) was studied electrochemically by using differential pulse voltammetry (DPV) with carbon paste electrode (CPE) at the surface and also in solution. Potentiometric stripping analysis (PSA) was employed to monitor the interaction of As₂O₃ with dsDNA in solution phase by using a renewable pencil graphite electrode (PGE). The changes in the experimental parameters such as the concentration of As₂O₃, and the accumulation time of As₂O₃ were studied by using DPV; in addition, the reproducibility data for the interaction between DNA and As₂O₃ was determined by using both electrochemical techniques. After the interaction of As₂O₃ with dsDNA, the DPV signal of guanine was found to be decreasing when the accumulation time and the concentration of As₂O₃ were increased. Similar DPV results were also found with ssDNA and oligonucleotide. PSA results observed at a low DNA concentration such as 1 ppm and a different working electrode such as PGE showed that there could be damage to guanine bases. The partition coefficients of As₂O₃ after interaction with dsDNA and ssDNA in solution by using CPE were calculated. Similarly, the partition coefficients (PC) of As₂O₃ after interaction with dsDNA in solution was also calculated by PSA at PGE. The features of this proposed method for the detection of DNA damage by As₂O₃ are discussed and compared with those methods previously reported for the other type of DNA targeted agents in the literature.