Catalytic Adsorptive Stripping Voltammetry of Cobalt in the Presence of Nitrite at an In Situ Plated Bismuth Film Electrode

For the first time an in situ plated bismuth film electrode has been applied to catalytic adsorptive stripping voltammetry of cobalt in the presence of nitrite. At optimised conditions bismuth film was plated before each measurement for 30 s at ?1.0 V from a sample solution with the added supporting electrolyte and Bi(III) in the form of its complex with tartrate. The calibration graph for Co(II) for an accumulation time of 120 s was linear from 5×10^?10 to 1×10^?8 mol L^?1. The detection limit was 1.1×10^?10 mol L^?1. The proposed procedure was applied for Co(II) determination in certified water reference material.     

Determination of Trace of Cobalt in Complex Matrices by Adsorptive Stripping Voltammetry at a Lead Film Electrode

An adsorptive stripping voltammetric procedure for the determination of cobalt in a complex matrices at an in situ plated lead film electrode was described. The procedure exploits the enhancement effect of a cobalt peak observed in the system Co(II)–nioxime–piperazine‐1,4‐bis(2‐ethanesulfonic acid)–cetyltrimethylammonium bromide. The calibration graph was linear from 5×10^?10 to 2×10^?8 mol L^?1 and from 1×10^?10 to 1×10^?9 mol L^?1 for the accumulation times 120 and 600 s, respectively. The detection limit (based on the 3 σ criterion) for Co(II) following accumulation time of 600 s was 1.1×10^?11 mol L^?1. The interference of high concentrations of foreign ions and surfactants was studied.     

Catalytic Adsorptive Stripping Chronopotentiometry of Co(II)‐DMG‐Bromate System at an In Situ Plated Lead Film Electrode

A novel catalytic adsorptive stripping chronopotentiometric (CC‐CAdSCP) procedure for the determination of Co(II) traces was developed using a lead film electrode (PbFE). The PbFE was generated in situ on a glassy carbon support from a 0.1 M ammonia buffer containing 1×10^?5 M Pb(II), 6.5×10^?5 M DMG and the target metals. An addition of 0.2 M NaBrO₃ to the solution yielded an 11‐fold catalytic enhancement of chronopotentiometric response of the Co(II)‐DMG complex. The CC‐CAdSCP curves were well‐developed, sharp and reproducible (RSD 5.0 % for 5×10^?9 M Co(II)). The limit of detection for Co(II) for 210 s of accumulation time was 4×10^?10 M (0.024 µg L^?1). In addition, the elaborated method allowed the simultaneous quantification of Co(II) and Ni(II) simultaneously.     

Carbon Paste Electrode Plated with Lead Film. Voltammetric Characteristics and Application in Adsorptive Stripping Voltammetry

A lead film plated in situ at a carbon paste support was tested as a novel, potential electrode for adsorptive stripping voltammetric determination of cobalt traces in an ammonia buffer solution. To show the practical applicability of the new electrode, a catalytic adsorptive Co system in a supporting electrolyte containing 0.1 M ammonia buffer, 5×10^?4 M nioxime and 0.25 M nitrite was selected and investigated as a model solution. Pb and Co ions were simultaneously accumulated in situ on the electrode surface: Pb ions electrochemically at ?1.3 V) and then at ?0.75 V, at which potential the Co(II)‐nioximate complex was also pre‐concentrated via adsorption. Instrumental parameters, such as the time of nucleation and formation of Pb film deposits, the time of accumulation of the Co‐nioxime complex at the PbF/CPE, and the procedures of electrode regeneration, were optimized to obtain good reproducibility and sensitivity of the Co response. The optimized procedure yields favorable and highly stable stripping responses with good precision (RSD=3% for a 5×10^?8 M Co) and good linearity (up to 5×10^?7 M, coefficient of determination, R=0.996). The detection limit was 4×10^?10 M Co (0.023 μg L^?1) for an accumulation time of 120 s. The method enables the determination of Co in the presence of high excesses of Ni or Zn. The voltammetric data were correlated with the structural characterization by scanning electron microscopy (SEM) and X‐ray fluorescence spectroscopy (XRF).     

Adsorptive Cathodic Stripping Voltammetric Method for Determination of Gallium Using an In Situ Plated Lead Film Electrode

The in situ plated lead film electrode was proposed for the first time for adsorptive stripping voltammetric determination of gallium in water samples. The method was based on simultaneous lead film formation and Ga(III)‐cupferron complex preconcentration at ?0.7 V and its cathodic stripping during the potential scan. The composition of the supporting electrolyte, cupferron concentration, conditions of lead film formation, potential and time of accumulation were studied in detail. Under optimum conditions the limit of detection was 3.8×10^?9 mol L^?1. The proposed procedure was validated in the course of Ga(III) determination in waste water certified reference materials.     

Simultaneous Determination of Nickel and Cobalt Using a Solid Bismuth Vibrating Electrode by Adsorptive Cathodic Stripping Voltammetry

A simple, fast, sensitive and greener voltammetric procedure for simultaneous analysis of nickel (Ni) and cobalt (Co) by square wave adsorptive cathodic stripping voltammetry (SW‐AdCSV) using a solid bismuth vibrating electrode is presented for the first time. The procedure enables to determine Ni together with Co, in ammonia buffer 0.1 M (pH 9.2) and in the presence of oxygen, and involves an adsorptive accumulation of metal‐dimethylglyoxime (Ni‐DMG and Co‐DMG) complexes on the electrode surface. For Ni and Co, the detection limits, obtained with 30 s of accumulation time, were 0.6 and 1.0 µg L^?1, respectively. The method was free of metals (Cd²⁺, Cr³⁺, Cr⁶⁺, Cu²⁺, Fe³⁺ and Pb²⁺ up to 50 µg L^?1, Al³⁺ and Mn²⁺ up to 500 µg L^?1; Zn²⁺ up to 300 µg L^?1) interferences up to the concentrations mentioned in brackets. The proposed method was validated for simultaneous determination of Ni and Co in a certified reference surface and river waters with good results.     

Determination of Folic Acid by Adsorptive Stripping Voltammetry at a Lead Film Electrode

An adsorptive stripping voltammetric procedure for the determination of folic acid at an in situ plated lead film electrode was described. Formation of lead film on a glassy carbon substrate and accumulation of folic acid was performed simultaneously from an acetate buffer solution of pH 5.6 at the potential ?0.88 V. The measurements were carried out from aerated solutions. The calibration graph for an accumulation time of 300 s was linear from 2×10^?9 to 5×10^?8 mol L^?1. The detection limit was 7×10^?10 mol L^?1, the relative standard deviation for 2×10^?8 mol L^?1 of folic acid was 3.9%. The proposed procedure was applied to folic acid determinations in pharmaceutical preparations.     

修饰铋盘电极吸附伏安法测定痕量钴的研究

研究了利用丁二酮肟修饰铋电极测定钴的吸附伏安分析方法。在0.4 mol/L NH3.H2O-NH4Cl缓冲溶液(pH=9.0)中,Co(Ⅱ)与铋盘电极表面修饰的丁二酮肟形成螯合物。并于-1.20 V附近产生一个灵敏的还原峰。富集时间分别为60 s和280 s时,峰电流与钴的质量浓度在0.01~25μg/mL和0.002~2μg/mL范围内呈线性关系。该还原峰与采用汞电极时的峰形相似、电位相近、灵敏度相当。优化了实验条件,拟订了样品分析的步骤,利用该法测定了合金、维生素B12针剂样品中的微量钴。     

Determination of Cysteine in the Presence of Copper in Diluted Alkaline Electrolyte by Adsorptive Stripping Voltammetry at the Mercury Film Electrode

Abstract

A stripping method for the determination of cysteine in the presence of copper at the submicromolar concentration levels is described. The method is based on controlled adsorptive accumulation of cysteine at mercury film electrode followed by linear cyclic voltammetry scan measurement of the surface species. Optimum experimental conditions were found to be the use of a 1×10^?3 M NaOH solution, an accumulation potential of ?0.50 V and a scan rate of 200 mV. s^?1. The response of cysteine is linear over the concentration range 0.04–0.20 ppm. For an accumulation time of 15 minutes, the detection limit was found to be 0.9 ppb (7.4×10^?9 M). The more convenient relation to measuring the cysteine in presence of metals, and others amino acids were also investigated. The utility of the method is demonstrated by presence of casein and ATP.     

A Cobalt Film Electrode for Nitrite Determination in Natural Water

In this study a cobalt film electrodeposited on a copper disk (Ø=3.1 mm) was tested as electrode to measure nitrite ions in raw water. This electrode was able to determine the nitrite ions concentration in nondeaerated synthetic media and in natural water. The electrode reached a detection limit of 0.2 μmol L^?1 and has a linear concentration range of 0.4 to 2 μmol L^?1 NO₂^?. The influence of several ions such as NO₃^?, Cl^?, SO₄^2?, Mg²⁺, HCO₃^? and NH₄⁺ was also tested. The electrode was used to determine the concentration of nitrite ions in a real sample.     

Adenine Determination in the Presence of Copper in Diluted Alkaline Electrolyte by Adsorptive Stripping Voltammetry at the Mercury Film Electrode

Highly sensitive, simple and inexpensive techniques of adenine determination are particularly interesting in relation to the present development of ATP and DNA sensors. A nanomolar concentration of adenine can be determined in the presence of copper. For an accumulation time of 30 minutes, the detection limit found was 0.22 ppb (1.63×10^?9 M). The method is based on controlled adsorptive accumulation of adenine‐copper at thin‐film mercury electrode followed by linear scan voltammetric measurement of the surface species. By applying a condition time of 60 s at ?0.9 V, the same thin‐film can be used over several measurements. Optimum experimental conditions were found to be the use of a 5.0×10^?3 M NaOH solution, an accumulation potential over the ?0.20 to ?0.40 V range, and a scan rate of 100 mV s^?1. The response of adenine‐copper is linear over the concentration range 20–100 ppb. The more convenient ways to measuring adenine in the presence of metals and other nitrogenated bases were also investigated. The adenosine triphosphate (ATP) or deoxyribonucleic acid (DNA) are first treated with acid (e.g., 0.1 M perchloric acid), and the acid‐released adenine (without separation from others products of the degradation) is directly determined by adsorptive stripping voltammetry.     

DNA Determination in the Presence of Copper in Diluted Alkaline Electrolyte by Adsorptive Stripping Voltammetry at the Mercury Film Electrode

A stripping method for the determination of single‐stranded DNA in presence of copper at the submicromolar concentration levels is described. The method is based on controlled adsorptive accumulation of adenine (from acid‐treated DNA) at thin‐film mercury electrode followed by linear scan voltammetry measurement of the surface species. Optimum experimental conditions were found to be the use of a 5.0×10^?3 M NaOH solution, an accumulation potential of ?0.40 V and a scan rate of 200 mV s^?1. The response of adenine–copper is linear over the concentration range 50–250 ppb. For an accumulation time of 15 minutes, the detection limit was found to be 4 ppb. The more convenient relation to measuring the ssDNA in presence of metals and nitrogenated bases were also investigated. The utility of the method is demonstrated by the presence of adenosine‐triphosphate (ATP) and amino acids.     

铋膜电极方波吸附溶出伏安法测定纺织品中痕量钴和镍

本文建立了在铋膜修饰电极上采用方波吸附溶出伏安法同时测定纺织品中痕量Co2+和Ni2+的方法.以NH3-NH4Cl作为缓冲液,在丁二酮肟浓度为10 μmol/L的体系中,Co2和Ni2+的还原峰电位分别为-1.13 V和-1.03 V.当缓冲溶液pH为9.2,富集电位为-0.7V,富集时间为200 s时,C02 +和Ni2+在0.5～50 μg/L范围呈现良好的线性关系,相关系数R2＞0.99,其检出限分别为0.79 μg/L和0.96 μg/L,其它金属离子的干扰较小.采用标准加入法测定纺织品中Co>和Ni2+,回收率在94.88％～104.14％之间.     

Fast Simultaneous Adsorptive Stripping Voltammetric Determination of Ni(II) and Co(II) at Lead Film Electrode Plated on Gold Substrate

A fast adsorptive stripping voltammetric procedure for simultaneous determination of Ni(II) and Co(II) in the presence of nioxime as a complexing agent at an in situ plated lead film electrode was described. The time of determination of these ions was shortened due to the application of gold as a substrate for lead film. At gold substrate lead film formation and accumulation of Ni(II) and Co(II) complexes with nioxime proceeds simultaneously. To obtain a stable signals for both ions a simple procedure of activation of the electrode was proposed. Calibration graphs for an accumulation time of 20 s were linear from 5×10^?9 to 1×10^?7 mol L^?1 and from 5×10^?10 to 1×10^?8 mol L^?1 for Ni(II) and Co(II), respectively. The procedure with the application of a lead film electrode on a gold substrate was validated in the course of Ni(II) and Co(II) determination in certified reference materials.     

铁氰酸钴膜电极的制备及特性

首次用电化学方法在玻碳基体上制成铁氰酸钻修饰膜电极(CHCF/GC).该电极非常稳定,可经受—1.0～0.9V(vs SCE)连续万次以上的电位扫描.讨论了CHCF膜电极的电荷传递过程,研究了影响CHCF膜电极伏安特性的各种因素和对Fe~(3+)/Fe~(2+)电对的催化作用。     

Histidine Determination in the Presence of Copper in Diluted Alkaline Electrolyte by Adsorptive Stripping Voltammetry at the Mercury Film Electrode

Abstract

A stripping method for the determination of histidine at the submicromolar concentration levels is described. The method is based on controlled adsorptive accumulation of histidine-copper complex at mercury film electrode followed by linear cyclic scan voltammetry measurement of the surface species. Optimum experimental conditions were found to be the use of a 1.0 × 10^?3 M NaOH solution, an accumulation potential of ? 0.20 V, and a linear scan rate of 200 mV sec^?1. The response of histidine is linear over the concentration range 0.02–0.12 ppm. For an accumulation time of 20 min, the detection limit was found to be 0.5 ppb (3.2 × 10^?9 M). The more convenient relation to measuring the histidine in the presence of metals, cysteine, tyrosine, and other amino acids was also investigated. The utility of the method is demonstrated by presence of casein, ATP, and ss DNA.     

Coulometric Anodic Stripping Voltammetry of Lead at Copper Column Electrode

A flow coulometric electroanalytical system using a copper column electrode with a copper wire inserted into a Nafion tube was developed to determine Pb(II) content based on anodic stripping voltammetry. The electrolysis efficiency of 5 μM Pb(II) was evaluated to be 100.4±4.5 % (n=5) when the length of the copper wire and flow rate of the Pb(II) solution were 50 cm and 0.1 mL min⁻¹, respectively. The amount of electricity due to the re-oxidation of Pb electrodeposited at the copper column electrode was proportional to the concentration of Pb(II) in the range between 0.1 to 100 μM, and the limit of detection for Pb(II) was 0.8 μM for a deposition time of 15 min. Interference from the presence of Cd(II) could be avoided and the selective determination of Pb(II) was successfully achieved by adjustment of the electrodeposition potential.     

Simultaneous Adsorptive Cathodic Stripping Voltammetric Determination of Nickel(II) and Cobalt(II) at an In Situ Bismuth‐Modified Gold Electrode

A study on the simultaneous determination of Ni(II) and Co(II) dimethylglyoximates (Ni‐DMG and Co‐DMG) through adsorptive cathodic stripping voltammetry at an in situ bismuth‐modified gold electrode (Bi‐AuE) is reported. The key operational parameters, such as Bi(III) concentration, accumulation potential and accumulation time were optimized and the morphology of the Bi‐microcrystals deposited on the Au‐electrode was studied. The Bi‐AuE allowed convenient analysis of trace concentrations of solely Ni(II) or of Ni(II) and Co(II) together, with cathodic stripping voltammograms characterized by well‐separated stripping peaks. The calculated limit of detection (LOD) was 40 ng L^?1 for Ni(II) alone, whereas the LOD was 98 ng L^?1 for Ni(II) and 58 ng L^?1 for Co(II), when both metal ions were measured together. The optimized method was finally applied to the analysis of certified spring water (NIST1640a) and of natural water sampled in the Lagoon of Venice. The results obtained with the Bi‐AuE were in satisfactory agreement with the certified values and with those provided by complementary techniques, i.e., ICP‐OES and ICP‐MS.     

Determination of Folic Acid at a Bismuth Film Electrode by Adsorptive Stripping Voltammetry

This article reports a new simple and sensitive method for the determination of folic acid by adsorptive stripping voltammetry. The method is based on the accumulation of folic acid at a bismuth film plated in situ on a glassy carbon substrate. In order to stabilize bismuth ions, sodium potassium tartrate was added to the supporting electrolyte. The bismuth film formation and folic acid accumulation conditions were optimized and measurements were carried without solution deaeration. The calibration graph was linear from 5 × 10^?10 to 2 × 10^?8 mole per liter with an accumulation time of 180 seconds with a limit of detection of 2 × 10^?10 mole per liter. The relative standard deviation for 5 × 10^?9 mole per liter of folic acid was 3.1 percent (n = 5). The method was successfully applied for determination of folic acid in pharmaceutical preparations.     

Determining Trace Concentrations of Copper in Water by Cathodic Film Stripping Voltammetry with Adsorptive Collection

Abstract

A technique is presented for the determination of trace concentrations of copper (II) in natural water samples by cathodic stripping voltammetry of a film of copper-catechol complex ions adsorbed on the hanging mercury drop electrode. The peak height of the copper-catechol reduction peak is linearly dependent upon the copper (II) concentration between 10^?10 and 10^?7 M. The detection limit of the technique is below 10^?10 M copper (II) for a collection time of 3 minutes, but the sensitivity can be further increased four-fold by collecting for 15 minutes. The sensitivity is reduced by high concentrations of competing trace metals and of surfactants, which necessitate the use of standard additions to the sample.