The efficiency of open tubular gas chromatographic columns

Summary A new parameter, the mean specific plate number, is proposed for assessing the efficiency of support coated open tubular (SCOT) and wall coated open tubular (WCOT) columns and for comparing the efficiency of different open tubular columns. It has the advantage over most previously used parameters in that it has only a small dependence on the partition ratio and it allows for the column diameter.A graphical presentation is given of the maximum theoretical mean specific plate number as a function of the partition ratio for SCOT columns having a range of relative porous layer thicknesses and for WCOT columns with a range of phase ratios.This presentation permits ready visual comparison of the potential efficiency of different columns and enables a simple evaluation of the percentage utilization of theoretical efficiency from experimentally determined values of the maximum mean specific plate number. For a given column the percentage utilization of theoretical efficiency at optimum average gas velocity and that at optimum practical gas velocity or at a higher average gas velocity are shown to be equal provided that corrections for column pressure drop are made.     

Kaolin as support for porous layer open tubular columns

Summary PLOT columns have been prepared with kaolin as the liquid phase support. These columns show good efficiency with different stationary phases and good thermal stability with polar phases. The performance of columns is shown by the separation of various mixtures such as fatty acids, phenols and anilines which are of analytical importance.     

The optimization of capacity and efficiency when coupling fused silica open tubular columns in gas chromatography

Summary There are a number of parameters which have to be chosen depending on the analysis being done in gas chromatography. While the choice of stationary phase material is based on the solutes to be separated, the thickness is dependent on the concentration and the volatility of the components to be analyzed. This study undertakes a coupled column phase ratio optimization by connecting a short piece of a particular column prior to a normal length of an analytical column. Various columns of different dimensions (phase ratio), but of the same stationary phase material (methyl silicone), are coupled together by a deactivated glass press-fit connector, and the efficiency and capacity are measured. The coupling of fused silica open tubular columns is optimized in efficiency by matching or decreasing the phase ratio of successive columns. Capacity optimization is accomplished by increasing the phase ratio of consecutive columns. Capacity and efficiency optimization are opposing each other; therefore, if some efficiency can be sacrificed a substantial increase in capacity is possible.     

开管离子色谱柱的制备与表征

近年来,开管离子色谱(OTIC)的研究已取得重大进展,尤其是兼容OH^-淋洗液的OTIC柱的成功研制使OTIC梯度洗脱得以实现。该文介绍了各种OTIC柱的制备和表征方法,涵盖早期的二氧化硅开管柱和新近出现的有机聚合物基质开管柱,对静电乳胶附聚的OTIC柱的一系列表征方法进行了系统阐述,包括开管柱柱容量的实验测定和理论计算方法、固定相相同时填充柱与开管柱之间的联系、柱效改善方法以及开管柱均一性表征等。     

Large diameter open tubular columns in gas chromatographic analysis

Large diameter open tubular columns provide the packed column chromatographer with a simple route to higher resolution gas chromatography. They can be operated in a high-flow (lower resolution) mode that permits their direct substitution for a packed column, or they can be operated in a low-flow (higher resolution) mode that maximizes separation at the cost of longer analysis times. Inlet design and column installation can influence both the chromatographic results and quantiative reliability. Make-up gas is not required in the high-flow mode, and its benefits in the low-flow mode are restricted to enhanced detector sensitivity, provided the outlet end of the column resides in the detector jet (FID). The columns seem fully compatible with all common modes of detection.     

Packed columns vs. wall coated open tubular columns in quantitative analyses of polychlorinated biphenyls

This article describes and critically evaluates a complete method for the quantitation of PCB in sediment samples. The extraction and clean-up procedure is described. Packed column and capillary column results are compared. Capillary column quantitation yields lower values for total PCB loading. Preferences for capillary column quantitation are discussed and explained. Capillary quantitation is based on the combination of an external Aroclor standard and an internal decachlorobiphenyl standard for normalizing data. In light of the recent report of synthesis of all 209 PCB congeners a suggestion is made to use these as absolute standards to establish a bank of primary standard Aroclors.     

Chemically modified teflon capillary columns for gas chromatography II. Solid surface effects in direct coated columns

Summary The preparation of teflon capillary columns employing direct coating of the stationary phase to the chemically modified teflon surface and the role of the chemically modified teflon in the separation mechanism are described. Two types of contributions from the modified teflon have been observed: nonspecific adsorption of the carbon surface and specific interactions of polar groups in the carbon skeleton. The use of polar liquid phases can eliminate adsorption due to the presence of polar groups in the modified teflon.     

Performance of open tubular columns as a function of tube diameter and liquid phase film thickness

Summary Wall-coated, open-tubular (capillary) columns prepared from different diameter tubing, with different liquid phase film thickness, are compared with each other and with packed and support-coated open-tubular columns. The comparison is based on the variation of the phase ratio and the capacity factor, and includes column efficiency (HETP, theoretical plate number), resolution, retention time, and sample capacity. Problems associated with the evaluation of the sample capacity are outlined. The influence of temperature on column performance is discussed in detail. Finally, the possibilities of short, wide-bore open-tubular columns prepared with a thick liquid-phase film are demonstrated.Parts of this paper were presented at the 35th Pittsburgh Conference on Analytical Chemistry and Applied Spectroscopy, Atlantic City NJ, March 5–9, 1984, and at the 20th International Symposium on Advances in Chromatography, New York NY, April 16–18, 1984.     

开管毛细管色谱柱的制备及其在蛋白质组学研究中的应用进展

近年来随着生命科学等领域的深入发展,人们对微量样本分离分析的需求越来越高,液相色谱系统的微量化受到了更多的关注。由于开管毛细管色谱柱具有较低的反向压力,可通过采用更长的色谱柱提高柱效,从而实现对复杂生物样本的高效分离,因而成为液相色谱柱新的发展方向。本文对开管毛细管色谱柱的制备方法及应用进展进行了综述。     

Open tubular columns: The influence of changing the liquid phase film thickness on column efficiency

Summary The factors characterizing the influence of the variation of the liquid phase film thickness on the mass transfer terms in the Golay equations describing the performance of open tubular columns are investigated and numerical values are given.Paper dedicated to Professor S. R. Lipsky on his sixtieth birthday.     

Chemically modified teflon wall-coated open tubular columns for gas chromatography

Summary Wall-coated open tubular columns prepared from chemically modified teflon tubing have been developed for gas chromatography. Chemical reaction of the inner walls of teflon tubing allows bonding of an adhesive layer on which a variety of stationary phaes can be coated. Test mixtures of alkanes and alcohols were used to investigate the chromatographic properties of these columns and the stability and mixing of the adhesive and stationary phae layers. the results in dicate that mixing of the layers is negligible and that the column is stable for a long period of time.Principle author     

Separation of a gasoline on an open tubular column with 1.3 million effective plates

Summary More than 1.3 million effective plates were produced by a column 450 meters long, 200 m inner diameter. The column was built up by connecting nine 50 meter columns in series. The sum of the efficiencies of the individual pieces equalled the efficiency of the combined column. Up to 970 components were differentiated in a gasoline standard.     

Factors affecting reproducibility in the manufacture of glass and siliceous glass open tubular (capillary) columns

Summary Column characteristics affecting the chromatographic behavior of glass and siliceous glass (fused silica) capillary columns include the dimensional uniformity of the column, the physical and chemical characteristics of the column wall and the characteristics of the liquid phase. In the case of the coated column the uniformity and thickness of the liquid phase film are the most important criteria affecting column reproducibility. The paper discusses these factors and their influence on column performance.Presented in part at the Symposium on Standardized Materials for Chromatography, 181 st National American Chemical Society Meeting, Atlanta, Georgia, March 29–April 3, 1981.     

Graphite layer open tubular (GLOT) columns in gas chromatography and environmental analysis

Summary The preparation of graphite layer open tubular (GLOT) columns is described together with their application to the analysis of priority pollutants and polar compounds such as alcohols, free carboxylic acids, aliphatic amines and phenols at the sub-nanogram level.A specific application of GLOT columns is for the direct analysis of aqueous solutions avoiding solvent extraction procedures. Several chromatograms of critical separations are reported together with calibration curves. A study of the reproducibility of column preparation is reported in terms of the standard deviation of the capacity ratio and of the minimum HETP obtained.     

The fabrication of poly (polyethylene glycol diacrylate) monolithic porous layer open tubular (mono‐PLOT) columns and applications in hydrophilic interaction chromatography and capillary gas chromatography for small molecules

The easy shrinkage and swelling of polymer monolithic column when exposed to mobile phase with different polarity is a problem that cannot be ignored. To overcome this drawback, a convenient aqueous two‐phase polymerization approach was used to prepare poly (polyethylene glycol diacrylate, PEGDA) monolithic porous layer open tubular (mono‐PLOT) columns (150 μm). The poly(PEGDA) mono‐PLOT column with homogeneous polymer porous layer was synthesized successfully. A maximum plate number of 41,500 plates per meter for allyl thiourea was obtained under a velocity of 1.8 mm/s. Several kinds of polar molecule were separated on the proposed mono‐PLOT column and a typical hydrophilic interaction retention mechanism was observed. High speed separation of benzoic acids was also carried out, baseline separation of five benzoic acids was successfully achieved within 5 min with a 70 cm mono‐PLOT column at 50°C. Furthermore, the resulting PLOT column was also successfully applied to separate standard analytes of three DNA oxidative damage products and RNA‐modified nucleosides and four chlorophenols. At last, the column could separate alcohols, alkanes, and aromatic isomers via GC. It had more than 20,000 plates per meter for butanol – higher than commercial coatings open tubular columns.     

On the efficiency of capillary columns coated with medium polarity thick films

The efficiency of FSOT columns coated with thick films of polyphenylmethylsiloxane was theoretically and experimentally compared to thin apolar and medium polar coatings and to thick apolar coatings. Experimental hū and TZū plots clearly demonstrate the enormous loss in chromatographic efficiency of thick films of medium polar siloxane stationary phases. The low diffusion coefficient in the liquid phaese is responsible for this behavior. The influence of the temperature and the nature of the solute on the efficiency was also studied.     

A four factor simplex optimization of a serially coupled open tublar columns gas chromatographic system

Optimization of a gas chromatographic system with two capillary columns coupled in series in a single oven for the linear temperature programmed separation of a mixture of C₁ C₁₀ hydrocarbons has been carried out using the simplex optimization method. The following four selectivity parameters were optimized: the initial temperature of the oven; the initial hold time; the temperature programmed rate; and the pressure at the mid-point of the system. The optimization procedure was monitored by the C_p criterion.     

The application of porous silica layers in open tubular columns for liquid chromatography

Summary Two methods to realize a porous retentive silica layer on the inner wall of 10–25 μm fused silica capillaries for OTLC, etching and precipitation of silica from solution, have been investigated. Etching of the fused silica capillaries with 1M KOH, creates an activated surface, but the capacity of the silica layer is too small to serve as retentive layer in OTLC. Better prospects are offered by the precipitation of silica from a solution of polyethoxysiloxane, dynamically coated on the inner wall of the fused silica capillary. It appears to be possible to deposite a porous silica layer up to 0.8 μm thick (in a 25 μm capillary) by this method, which seems to be suitable for liquid-solid an dynamically generated liquid-liquid chromatography in open tubular columns. The performance of these columns are demonstrated by means of efficient separations of test mixtures using on-column fluorescence detection.