原子类型电拓扑指数在脂肪醇类化合物毒性预测研究中的应用

采用原子类型电拓扑指数(ETSIAT)为结构描述子, 对梨形四膜虫、番茄、红蜘蛛、发光细菌荧光素酶、呆鲦鱼以及鼠的脂肪醇毒性进行了定量构效关系(QSAR)研究. 在偏最小二乘法建立QSAR模型的基础上, 采用内部和外部两种验证方法对模型进行验证. 研究结果表明: ETSIAT可以很好地表征脂肪醇与多种生物毒性相关的结构信息, 所建模型具有良好的稳定性和外部预测能力. 偏最小二乘模型分析结果显示: 疏水性可能是影响脂肪醇毒性大小的主要因素, 其毒性随C链长度的增加而增强, 且相同C原子数的直链脂肪醇毒性明显高于支链脂肪醇; 由于空间位阻效应, 长链脂肪醇与短链脂肪醇可能存在不同的毒性作用机理.     

Synthesis of aliphatic amidediol and used as a novel mixed plasticizer for thermoplastic starch

In this paper,aliphatic amidediol was synthesized and mixed with glycerol used as a plasticizer for preparing thermoplastic starch（AGPTPS）.The yield of aliphatic amidediol was 91%.FF-IR expressed that the mixture of aliphatic amidediol and glycerol formed stronger and stable hydrogen bond with starch molecules compared to the native cornstarch.By scanning electron microscope（SEM）native cornstarch granules were proved to transfer to a homogeneous continuous system.After being stored for a period time at room temperature,the mechanical properties of AGPTPS were also studied.As a mixed plasticizer,aliphatic amidediol and glycerol would be practical to extend TPS application scopes.     

The epoxy–polycarbonate blends cured with aliphatic amine—I. Mechanism and kinetics

Reaction mechanism of the PC–epoxy blends cured by aliphatic amine has been investigated by varying PC contents in the blends. The transamidation reaction tends to convert nearly all the carbonates into N-aliphatic aromatic carbamates even at ambient temperature before normal curing. The remaining amine proceeds the normal curing with epoxy at a higher temperature (80°C). For the PC–epoxy/aliphatic amine blend containing 6 wt % PC, the yielded N-aliphatic aromatic carbamate further reacts with amine to produce the urea structure. The urea undergoes substitution reaction with the hydroxyl formed from the normal curing to give the N-aliphatic aliphatic carbamate. For the blend containing 12 wt % PC, the N-aliphatic aromatic carbamate converts into the N-aliphatic aliphatic carbamate via two different routes. For the blend containing lower molecular weight of the aliphatic amine, the N-aliphatic aromatic carbamate reacts with hydroxyl to form the N-aliphatic aliphatic carbamate directly. For the blend containing higher molecular weight of aliphatic amine, the N-aliphatic aromatic carbamate decomposes into the aliphatic isocyanate accelerated by the presence of the residual oxirane. The isocyanate formed then reacts with hydroxyl to yield the N-aliphatic aliphatic carbamate. The activation energy (E_a) and preexponential factor (A) of the PC–epoxy/POPDA blends decrease with the increase of the PC content. Kinetic study by thermal analysis by the method of autocatalyzed model is able to correctly predict oxirane conversion vs. time relationship for the neat epoxy/aliphatic amine and the PC–epoxy/aromatic amine systems because the dominant reaction is the normal curing reaction between amine and oxirane. The model fails to predict the PC–epoxy/aliphatic amine system because the system is complicated by several other reactions besides the normal curing reaction. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2169–2181, 1997     

脂肪族聚酯-酰胺的研究进展

脂肪族聚酯-酰胺（polyester-amides）合了聚酯和聚酰胺的优点,如具有优良的物理力学性能和加工性能等等。因此,对脂肪族聚酯-酰胺的研究成为近年来的研究热点。本文从脂肪族聚酯-酰胺的模型化合物（以双酰胺-二醇单体为例）的研究进展入手,分析了模型化合物的结构特点,以及模型化合物与相应聚合物之间的联系,从而为进一步研究聚合物打下一定的基础。本文还综述了脂肪族聚酯-酰胺的分类,各类脂肪族聚酯-酰胺的合成方法,以及脂肪族聚酯一酰胺在可生物降解材料和热塑性弹性体等领域的应用。     

Kinetics of curing of diane and aliphatic epoxy oligomer blends: IR-spectroscopy study

The curing of diane and aliphatic epoxy oligomers and their blends is studied by IR spectroscopy. Methods for the quantitative determination of epoxy groups in diane and aliphatic oligomers and their blends during curing are developed. It is shown that, during the joint curing of epoxy oligomers, the reactivity of a more active (diane) oligomer remains practically the same, whereas the reactivity of a less active (aliphatic) epoxy oligomer increases. The rate constants for the consumption of epoxy groups of oligomers and primary amine groups of the curing agent are determined.     

Intermolecular Cross-Acyloin Reactions by Fluoride-Promoted Additions of O-Silyl Thiazolium Carbinols

The addition of acyl anion equivalents to aliphatic aldehydes (crossed-acyloin reaction) has been developed. Cesium fluoride with isopropanol as solvent promotes the addition of O-silyl thiazolium carbinols to various aliphatic aldehydes in moderate to good yields. These reactions represent a general procedure for the selective coupling of aliphatic aldehydes by an acyl anion reaction which have been problematic until now.     

Ion-chromatographic selectivity of polyelectrolyte sorbents based on some aliphatic and aromatic ionenes

An aliphatic ionene with hydroxyl group (2HP-8 ionene), mixed aliphatic-aromatic ionenes (3-X and 6-X ionenes), aromatic ionene (Ph-X ionene), and viologen (Dp-X ionene) - polymers with quaternary nitrogen atoms in the main chain served as modifiers in synthesising polyelectrolyte sorbents for ion chromatography. The selectivity of produced and several previously prepared anion exchangers was compared with those of aliphatic ionenes. It was found that aromatic ionenes having a rigid structure of polymer chains are similar to their aliphatic analogues with shorter chains with a high charge density. Polyelectrolyte sorbents based on aromatic ionenes show higher selectivity to aromatic acids (e.g., 1-naphthalenesulfonic acid) as compared with aliphatic ionenes due to specific pi-pi interactions.     

脂肪胺的高效液相色谱分离及质谱鉴定

 采用新型荧光试剂1,2-苯并-3,4-二氢咔唑-9-乙酸(BCAA)为柱前衍生化试剂,在Hypersil BDS-C18色谱柱上,通过梯度洗脱对12种游离脂肪胺进行了分离和在线质谱定性。以乙腈为溶剂,1-乙基-3-(3-二甲氨基丙基)环己碳二亚胺(EDAC)为缩合剂,在50 ℃条件下衍生反应15 min后获得稳定的荧光产物。激发波长和发射波长分别为333 nm和390 nm。采用大气压化学电离源(APCI)的正离子模式,实现了土壤和污水中脂肪胺的定性及其含量的测定。脂肪胺的线性相关系数大于0.9993,检测限为12~28 fmol。     

FTIR study of E7 liquid crystal orientations confined to cylindrical cavities of Anodisc membranes

The orientation of E7 liquid crystal (LC) confined within 200 nm diameter cylindrical cavities of Anodisc membranes was investigated by FTIR dichroism techniques. The cavity walls of the confining pores were chemically modified with different length aliphatic acids (C_nH_2n+1COOH, n=5, 6, 7, 9) at 2 and 4% concentrations. From the FTIR spectra of the aliphatic acid-treated alumina Anodsic membranes, we found salt formation between the -COOH group of the aliphatic acids and the Anodisc membranes. From the FTIR spectra of LC-filled Anodisc membranes, we found an abrupt alignment direction change, from parallel to perpendicular, of the LC molecules along the long axis of the cavities between n=6 and n=7 for the 2% concentration of aliphatic acid. However for the 4% concentration of aliphatic acid the parallel to perpendicular alignment direction of LC molecules changed between n=5 and n=6. The same trend was previously observed for ²H NMR measurements by other researchers.     

The first transformation of aliphatic alpha,beta-epoxyamides into alpha-hydroxyamides

A general synthesis of aliphatic alpha-hydroxyamides with total regioselectivity by a reductive cleaveage of the C(beta)-O bond of aliphatic alpha,beta-epoxyamides, promoted by samarium diiodide and MeOH, is described. The treatment of enantiopure aliphatic alpha,beta-epoxyamides afforded enantiomerically enriched aliphatic alpha-hydroxyamides. A radical mechanism has been proposed to explain this reaction. [reaction: see text]     

Synthesis and ring‐opening polymerization of co‐cyclic(aromatic aliphatic disulfide) oligomers

An effective approach was presented for the synthesis of co‐cyclic(aromatic aliphatic disulfide) oligomers by catalytic oxidation of aromatic and aliphatic dithiols with oxygen in the presence of a copper‐amine catalyst. The aromatic dithiols can be 4,4′‐oxybis(benzenethiol), 4,4′‐diphenyl dithiol, 4,4′‐diphenylsulfone dithiol. The aliphatic dithiols can be 1,2‐ethanedithiol, 2,3‐butanedithiol, 1,6‐hexane dithiol. The co‐cyclic(aromatic aliphatic disulfide) oligomers were characterized by gradient HPLC, MALDI‐TOF‐MS, GPC, ¹H‐NMR, TGA, and DSC techniques. The glass transition temperatures of these co‐cyclics ranged from ?11.3 to 56.6°C. In general, these co‐cyclic(aromatic aliphatic disulfide) oligomers are soluble in common organic solvents, such as CHCl₃, THF, DMF, DMAc. These co‐cyclic oligomers readily underwent free radical ring‐opening polymerization in the melt at 180°C, producing linear, tough and high molecular weight poly(aromatic aliphatic disulfide)s. The glass transition temperatures of these polymers ranged from ?3.7 to 107.8°C that are higher than those of corresponding co‐cyclics. Copyright © 2003 John Wiley & Sons, Ltd.     

A highly convenient,efficient, and selective process for preparation of esters and amides from carboxylic acids using Fe(3+)-K-10 montmorillonite clay

In the presence of Fe(3+)-K-10 montmorillonite clay as a catalyst, aliphatic carboxylic acids selectively produced the corresponding esters in the presence of aromatic carboxylic acids by treatment with alcohols. Both the aliphatic and aromatic carboxylic acids formed the amides by reacting with the aliphatic amines, but only the aliphatic carboxylic acids yielded the anilides by treatment with aromatic amines. The catalyst is recoverable and recyclable.     

Cyano-containing ionic liquids for the extraction of aromatic hydrocarbons from an aromatic/aliphatic mixture

Ionic liquids can replace conventional solvents in aromatic/aliphatic extractions, if they have higher aromatic distribution coef- ficients and higher or similar aromatic/aliphatic selectivities. Also physical properties, such as density and viscosity, must be taken into account if a solvent is applied in an industrial extraction process. Cyano-containing ionic liquids have a lower den- sity than the benchmark solvent sulfolane and a higher viscosity. Sulfolane is from a hydrodynamic point of view a better sol- vent than ionic liquids for the aromatic/aliphatic extraction. The most suitable ionic liquids for the extraction of aromatic hy- drocarbons from a mixture of aromatic and aliphatic hydrocarbons are [bmim]C(CN)3, [3-mebupy]N(CN)2, [3-mebupy]C(CN)3, [3-mebupy]B(CN)4 and [mebupyrr]B(CN)4. They have factors of 1.2-2.3 higher mass-based distribution coefficients than sul- folane and a similar or higher, up to a factor of 1.9 higher, aromatic/aliphatic selectivity than sulfolane. The IL [3-mebupy]N(CN)2 is a better extractant for the separation of toluene from a mixture of toluene/n-heptane in a pilot plant Ro- tating Disc Contactor (RDC) than sulfolane.     

The influences of solid-phase organic constituents on the partition of aliphatic and aromatic organic contaminants

The influence of natural organic matter (NOM) constituents on contaminant distribution coefficients was evaluated by determining the Koc values of aromatic and aliphatic organic compounds (solutes) with clays modified with both aromatic- and aliphatic-rich organic constituents. The studied compounds consisted of naphthalene, phenanthrene, n-pentane, and 2,3,4-trimethylmethane; the solid samples comprised two clays with little organic content, kaolinite and Ca-montmorillonite. Two aliphatic surfactants and three aromatic dyes, sorbed to the clays, served as reference NOM constituents. For solutes of comparable water solubilities, the organic-carbon normalized distribution coefficients (Koc) of the aliphatic solutes between sorbed aliphatic organic matter and aqueous solution slightly exceed those of the aromatic solutes. By contrast, the aromatic solutes exhibited higher Koc values than did the aliphatic compounds with sorbed aromatic-rich organic matter. The difference in Koc values could be attributed to either comparable solubility parameters or the difference in the chemical structure between nonionic organic solutes and specific components of the simulated NOM. The much higher Koc values observed for the aromatic solutes indicate that the NOM composition is a major factor determining the NOC environmental distribution.     

脂肪族聚酰胺热膨胀行为的研究

通过热膨胀测试,示差扫描量热分析(DSC)、广角X射线衍射(WAXD)与傅里叶变换红外光谱(FTIR)等方法研究了4种脂肪族聚酰胺玻璃化转变温度(Tg)、结晶行为以及氢键强度对热膨胀行为的影响,探索了影响脂肪族聚酰胺热膨胀的本质.DSC和X射线衍射结果表明,聚酰胺中结晶部分的热膨胀系数要低于无定形部分,但聚酰胺的熔融温度和结晶度对热膨胀的影响不够明确.相比较其它脂肪族聚酰胺,聚酰胺56(PA56)具有较高的玻璃化转变温度和较低的亚甲基/酰胺基(CH2/CONH)比例,表现出较低的热膨胀系数.研究发现,在相同条件下制备的脂肪族聚酰胺体系中,CH2/CONH比例或Tg与热膨胀系数具有明显的线性关系,随着CH2/CONH比例的降低或Tg的升高,热膨胀系数显著减小.FTIR的结果表明,聚酰胺分子链间的氢键密度和氢键强度随温度升高衰减的程度是影响其热膨胀行为的关键因素.     

Thermal degradation of environmentally degradable poly(hydroxyalkanoic acid)s

Aliphatic polyesters have attracted industrial attention as environmentally degradable thermoplastics to be used for a wide range of applications. Besides intensive studies on the biodegradability of aliphatic polyesters, understanding of the thermal stability has importance for processing, application, and recycling. The details of thermal degradation processes of five types of aliphatic polyesters; namely, poly(L-lactide), poly(3-hydroxybutyric acid), poly(4-hydroxybutyric acid), poly(delta-valerolactone), and poly(epsilon-caprolactone), were investigated by means of several thermoanalytical techniques under both isothermal and non-isothermal conditions. In this feature article, the thermal degradation behaviors of aliphatic polyesters with different numbers of carbon atoms in the main chain of the monomeric unit are reviewed. In addition, the effects of chain-end structure and residual metal compounds on the thermal degradation processes of aliphatic polyesters consisting of hydroxyalkanoic acid monomeric units are presented. Schemes of thermal degradation reaction of poly(hydroxyalkanoic acid)s.     

Poly(thioester)s

Syntheses and properties of aliphatic and aromatic polythioesters (PTEs) were reviewed including polythiocarbonates and polythiourethanes. The content is subdivided into the following sections: PTEs of aliphatic α‐mercapto carboxylic acid, PTEs of ω‐mercapto carboxylic acids, PTEs derived from α,ω‐dimercapto alkanes, aromatic poly(thioester)s, aliphatic poly(thiocarbonate)s, aliphatic poly(thiourethane)s and aromatic polythiocarbonates. The synthetic strategies reviewed in this article include anionic and cationic ring‐opening polymerizations, polycondensations in bulk, polycondensations in solutions, interfacial polycondensations and in vitro enzymatic polycondensations.     

脂肪醇的味阈值与分子结构之间的定量关系

通过拓扑方法探讨了脂肪醇的味阈值与分子结构之间的关系,发现脂肪醇的味阈值主要取决于分子的大小和羟基在分子中的位置(且羟基的位置对味阈值的影响十分显著),提出一个既能表征脂肪醇结构与味阈值之间关系、又能预测味阈值的定量关系式,发展了一种设计具有特定味阈值的脂肪醇分子结构的方法。对99种脂肪醇的计算结果表明,味阈值预测值与计算值与实验值的一致性令人满意。     

N,N'-dialkyl- and N-alkyl-N-mesityl-substituted N-heterocyclic carbenes as ligands in Grubbs catalysts

Various symmetrically and asymmetrically substituted N-heterocyclic carbene (NHC) ligands bearing aliphatic nitrogen-containing side groups have been synthesised. In our attempts to isolate the corresponding second-generation Grubbs catalysts, we were unsuccessful when using the symmetrical aliphatic NHC ligands. For the asymmetrical ligands bearing an aliphatic moiety on one side and an aromatic mesityl group on the other side, substitution of a phosphine ligand was achieved. The performance of a so-formed series of Ru-based metathesis initiators has been evaluated for the ring-opening metathesis polymerisation (ROMP) of cycloocta-1,5-diene and the ring-closing metathesis (RCM) of diethyl diallylmalonate.     

The phase behavior of tetramethyl bisphenol-A polyarylate/aliphatic polyester blends

The phase behavior of blends of tetramethyl bisphenol-A polyarylate (TMPAr) with various linear aliphatic polyesters characterized by the ratio of aliphatic carbons to ester groups in the repeating unit, CH₂/COO = 3 ∼ 9, was examined by differential scanning calorimetry and dynamic mechanical analysis. TMPAr/aliphatic polyester blends prepared by solvent casting were found to be miscible when the CH₂/COO ratio of aliphatic polyesters was larger than 4 and up to 9. The thermodynamic interaction parameter, B for the miscible blends was determined by the analysis of the depression of the melting point of polyester using the Hoffman-Weeks method. From the analysis of the heat of mixing data using a binary interaction model, it was concluded that strong unfavorable intramolecular interaction exists between the  CH₂ and  COO units in aliphatic polyesters and that four substituted methyl groups produces more favorable effects on the miscibility TMPAr with aliphatic polyesters. © 1998 John Wiley & Sons, Inc. J Polym Sci 36 : 201–212, 1998