低温等离子体转化NO/O2/N2气氛中NO的实验研究

通过建立低温等离子体实验系统, 研究了介质阻挡放电型低温等离子体反应器作用于NO/O2/N2混合气体系时, NO, O2初始浓度对NO的转化效率的影响以及NOx, O3浓度随能量密度的变化关系. 低温等离子体作用于NO/O2/N2混合气体系时, NO同时发生氧化还原反应, 氧化反应占主导地位, 大部分NO转化为NO2; NO转化率随O2, NO初始浓度增大而降低, 能量密度在450～600 J/L时转化率较高; 产生的O3浓度随能量密度的增大呈先增后减的趋势.     

Singlet-triplet energy separations in divalent five-membered cyclic conjugated C5H3X, C4H3SiX, C4H3GeX, C4H3SnX, and C4H3PbX (X = H, F, Cl, and Br)

Singlet-triplet energy gaps in cyclopenta-2,4-dienylidene, as well as its 2- or 3-halogenated derivatives, are compared and contrasted with their sila, germa, stana, and plumba analogues; at HF/6-31G* and B3LYP/ 6-311++G(3df, 2p) levels of theory. Energy gaps (ΔG_t-s), between triplet (t) and singlet (s) states, appear linearly proportional to: (i) the size of the group 14 divalent element (M = C, Si, Ge, Sn and Pb), (ii) the angle ∠C-M-C, and (iii) the ΔG_(LUMO-HOMO) of the singlet state involved. The magnitude of ΔG_t-s, for each 2- and/or 3-substituted species studied, increases with an order of: carbenes < silylenes < germylenes < stanylenes < plumbylenes. This order reverses for the barriers of the ring puckering. The puckering occurs with more ease for every singlet, compared to its corresponding triplet form.Regardless of the group 14 element (M) employed, every 3-halo-substituted species is more stable than the corresponding 2-halo-substituted isomer. For M = Pb, Sn and/or Ge; 3-halo-substituted species have higher ΔG_t-s than their corresponding 2-halo-substituted analogues. For M = Si, similar ΔG_t-s are found for 2- and 3-halogenated isomers. For M = C, 3-halo-substituted species have lower ΔG_t-s than their corresponding 2-halo-substituted analogues.Every cyclic singlet has a larger ∠C-M-C angle, than its corresponding cyclic triplet state, except for 3-halosilacyclopenta-2,4-dienylidenes where triplet has a larger ∠C-M-C angle than its corresponding singlet state.     

Cu-Fe-PILC催化C3H6选择性还原NO的性能

采用羟基铁离子柱撑Na-Mont制备出1.0Fe-PILC,通过超声浸渍法合成不同铜负载量的nCu-Fe-PILC,并测试了其在富氧条件下催化C_3H_6选择性催化还原NO的性能。通过N_2吸附脱附、XRD、UV-Vis、H_2-TPR、Py-FTIR等技术手段表征催化剂的微观结构和物化性质,进一步解释其催化反应机理。结果表明,Cu的引入提高了1.0Fe-PILC的中低温活性和抗水硫能力。其中9Cu-Fe-PILC在300℃时NO转化率可达69.8%以上,400℃后NO转化率保持在99%以上且水硫影响较小。XRD、N_2吸附脱附结果表明,催化剂的SCR活性与所负载的活性组分和催化剂的吸附能力有关。UV-Vis结果表明,9Cu-Fe-PILC具有较强的中低温活性,与其含有较多的游离态Cu~(2+)有关。H_2-TPR结果表明,与1.0Fe-PILC相比,经Cu修饰的nCu-Fe-PILC获得了中低温还原能力。Py-FTIR结果表明,nCu-Fe-PILC表面同时含有Lewis酸和Br?nsted酸,Lewis酸是影响催化剂SCR活性的主要因素。     

Spectroscopic Characterization of CH4 + CO2 Plasmas Excited by a Dielectric Barrier Discharge at Atmospheric Pressure

Plasma processing of a (CH ₄ +CO ₂ ) mixture can lead to the formation of synthesis gas (CO+H ₂ ). The use of a nonthermal plasma for this type of process seems very promising. We report here an electric and spectroscopic characteristic of plasma created in a (CH ₄ +CO ₂ ) mixture by a high-voltage, steep front-voltage (>10 ¹² V/s), very-short-pulse triggered dielectric barrier discharge in a tubular cell. Particular attention was payed to the determination of the rotational temperature for C ₂ . Time resolved investigation of the Swan band leads to an estimated value around 3000 K.     

Oxidative Conversion of PFC via Plasma Processing with Dielectric Barrier Discharges

Perfluorocompounds (PFCs) have been extensively used as plasma etching andchemical vapor deposition (CVD) gases for semiconductor manufacturingprocesses. PFCs have significant effects on the global warming and havevery long atmospheric lifetimes. Laboratory-scale experiments were performedto evaluate the effectiveness of CF4 conversion by using dielectric barrierdischarges (DBD). The results of this study revealed that the removalefficiency of CF₄ increased with application of higher voltage, gas residence time, oxygen content, and frequency. Combined plasma catalysis(CPC) is an innovative way for abatement of PFC and experimental results indicated that combining plasma with catalysts could effectively remove CF4. Products were analyzed by Fourier transform–infrared spectroscopy (FT–IR) and the major products of the CF4 processing with DBD were CO2, COF2, and CO, when O was included in the discharge process. Preliminary results indicated that as high as 65.9% of CF4 was decomposed with CPC operated at 15 kV, 240 Hz for the gas stream containing 300 ppmv CF₄,20% by volume O₂, and 40% by volume Ar, with N₂ as thecarrier gas.     

Cu-Ni/La2O3热解C2H2制备碳纳米管的研究

Nano-sized and well-dispersed Cu-Ni/La₂O₃ can be obtained by reduction of LaCu_0.2Ni_0.8O₃ with the structure of perovskite. Using Cu-Ni/La₂O₃ as catalyst and C₂H₂ as carbon source, carbon nanotubes with a high yield and narrow diameter distribution can be obtained in the reaction temperature range of 650～700℃. Outer diameter of carbon nanotubes rangs from 9nm to 14nm. TG, Raman and XPS analysis indicate that carbon nanotubes prepared by Cu-Ni/La₂O₃ are relatively higher in graphitic degree.     

Study of SO2 Removal Using Non-thermal Plasma Induced by Dielectric Barrier Discharge (DBD)

Dielectric Barrier Discharge (DBD) non-thermal plasma reactors built with three different dielectric materials for SO₂ removal were studied. The discharge characteristics of the three dielectrics, namely glass, Teflon, and glass fiber-based epoxy resin, were analyzed using Lissajous figures. From the Lissajous figures, the transition charge and energy deposition for each dielectric material were determined. When both the discharge characteristics and mechanical processability were considered, glass fiber-based epoxy resin was regarded as the best dielectric barrier among the three for DBD plasma reactors. A multi-cell DBD reactor built with glass fiber-based epoxy resin was used for treating air stream containing SO₂. SO₂ % removal decreased with increasing initial SO₂ concentration in a biphasic fashion. SO₂ removal was greatly improved by adding NH₃ into the air stream. Raising the relative humidity of the air stream also helped SO₂ removal. A SEM (scanning electron microscope) test illustrated some changes in surface morphology of Teflon and glass fiber-based epoxy resin.     

Conversion of natural gas to C2 hydrocarbons through dielectric-barrier discharge plasma catalysis

The experiments are carried out in the system of continuous flow reactors with dielectric-barrier discharge (DBD) for studies on the conversion of natural gas to C₂ hydrocarbons through plasma catalysis under the atmosphere pressure and room temperature. The influence of discharge frequency, structure of electrode, discharge voltage, number of electrode, ratio of H₂/CH₄, flow rate and catalyst on conversion of methane and selectivity of C₂ hydrocarbons are investigated. At the same time, the reaction process is investigated. Higher conversion of methane and selectivity of C₂ hydrocarbons are achieved and deposited carbons are eliminated by proper choice of parameters. The appropriate operation parameters in dielectric-barrier discharge plasma field are that the supply voltage is 20–40 kV (8.4–40 W), the frequency of power supply is 20 kHz, the structure of (b) electrode is suitable, and the flow of methane is 20–60 mL · min⁻¹. The conversion of methane can reach 45%, the selectivity of C₂ hydrocarbons is 76%, and the total selectivity of C₂ hydrocarbons and C₃ hydrocarbons is nearly 100%. The conversion of methane increases with the increase of voltage and decreases with the flow of methane increase; the selectivity of C₂ hydrocarbons decreases with the increase of voltage and increases with the flow of methane increase. The selectivity of C₂ hydrocarbons is improved with catalyst for conversion of natural gas to C₂ hydrocarbons in plasma field. Methane molecule collision with radicals is mainly responsible for product formation.     

Kinetic and Spectroscopic Study of C2H5C(O)O2 Radicals Using Laser Flash Photolysis and UV Absorption Spectrometry

Rate constant for the self-combination reaction of the propionylperoxy radical was measured at room temperature using laser photolysis - transient absorption technique. The observed rate coefficient is (1.44 ± 0.14)x10⁻¹¹ cm³ molecule⁻¹ s⁻¹ at 298 K. This revised version was published online in June 2006 with corrections to the Cover Date.     

Ho(NO3)3(C2H5O2N)4·H2O的低温热容和热力学函数

合成了稀土(钬, Ho)-氨基酸(甘氨酸, C₂H₅O₂N)二元配合物Ho(NO₃)₃(C₂H₅O₂N)₄·H₂O, 并且通过化学分析、元素分析和红外(IR)光谱对配合物进行了表征. 用高精度全自动绝热量热仪, 测定了该配合物在80-390 K温度区间的定压摩尔热容(C_p,m). 利用实验测定的热容数据, 采用最小二乘法, 将热容曲线上热容峰以外的两段平滑区的摩尔热容对折合温度进行拟合, 建立了热容随折合温度变化的多项式方程. 根据热容与焓、熵的热力学关系,计算出了配合物在80-390 K温度区间内,每隔5 K,相对于298.15 K的摩尔热力学函数(H_T,m-H_298.15,m)和(S_T,m-S_298.15,m). 通过热容曲线分析, 计算出了350 K附近转变过程的焓变(Δ_trsH_m)和熵变(Δ_trsS_m). 用差示扫描量热法(DSC)测定了配合物的热稳定性.     

添加C10H10Cl2Ti对6LiBH4-CaH2-3MgH2体系储氢性能的影响

C_(10)H_(10)Cl_2Ti的添加可以有效改善6LiBH_4-CaH_2-3MgH_2样品吸放氢性能,添加的质量分数为5%时具有较好的催化效果。样品的起始和终止放氢温度比原始样品分别降低约30和25℃,可逆储氢量(质量分数)约为8.1%。添加C_(10)H_(10)Cl_2Ti催化剂的样品在360℃下等温放氢速率比原始样品提高了178%。两步放氢反应的表观活化能分别为131.4和138.8 kJ·mol~(-1),相比原始样品降低了约18.6%和15.8%。利用X射线光电子能谱(X-ray photoelectron spectroscopy,XPS)对样品进行分析发现,热分解过程中C_(10)H_(10)Cl_2Ti生成了多价态的Ti化合物,催化了LiBH_4与CaH_2的反应,从而改善了复合体系的储氢性能。     

一步水热合成Cu-SSZ-13分子筛选择性催化C3H6还原NO

采用铜胺配合物(Cu²⁺-四乙烯五胺,Cu-TEPA)作为结构导向剂,通过一步水热法合成不同铜铝比(n_Cu/n_Al)和硅铝比(n_Si/n_Al)的Cu-SSZ-13分子筛催化剂,研究其在贫燃条件下丙烯选择性催化还原NO(C₃H₆-SCR)的性能。当n_Cu/n_Al=2、n_Si/n_Al=6时2.0Cu-SSZ-13(6)催化剂具有最好的低温脱硝活性,200℃时NO转化率超过80%,在250~300℃可实现100%脱硝效率和~100%N₂选择性,同时具有较强的抗水、抗硫性能。为研究不同n_Cu/n_Al和n_Si/n_Al对催化剂物理化学特性的影响,通过X射线衍射(XRD)、扫描电子显微镜(SEM)、N₂吸附-脱附测试、H₂程序升温还原(H₂-TPR)、氨气程序升温脱附(NH₃-TPD)、紫外可见光谱(UV-Vis)等手段对样品进行表征。结果表明,2.0Cu-SSZ-13(6)具有最佳的脱硝性能,这是因为其具有最大的比表面积、最强的表面酸性和分布最多的孤立态Cu²⁺离子。Cu-SSZ-13上丰富的酸性位可以有效促进C₃H₆和NO的吸附和活化,SSZ-13分子筛八元环中孤立的Cu²⁺离子具有良好的氧化还原性能,是C₃H₆-SCR反应的主要活性位。随着n_Cu/n_Al的增加,孤立的Cu²⁺离子会在分子筛表面迁移、集聚形成CuO物种,从而导致C₃H₆-SCR活性下降。     

Methane Conversion Using Dielectric Barrier Discharge：Comparison with Thermal Process and Catalyst Effects

The direct conversion of methane using a dielectric barrier discharge has been experimentally studied. Experiments with different values of flow rates and discharge voltages have been performed to investigate the effects on the conversion and reaction products both qualitatively and quantitatively. Experimental results indicate that the maximum conversion of methane has been 80% at an input flow rate of 5 ml/min and a discharge voltage of 4 kV. Experimental results also show that the optimum condition has occurred at a high discharge voltage and higher input flow rate. In terms of product distribution, a higher flow rate or shorter residence time can increase the selectivity for higher hydrocarbons. No hydrocarbon product was detected using the thermal method, except hydrogen and carbon. Increasing selectivity for ethane was found when Pt and Ru catalysts presented in the plasma reaction. Hydrogenation of acetylene in the catalyst surface could have been the reason for this phenomenon as the selectivity for acetylene in the products was decreasing.     

Vibrational spectra of cyclooctatetraenyl alkali metal complexes [C8H8M2 (M = Na, K)]: A theoretical study

The cyclooctatetraenyl dianion (C₈H₈²⁻) π-conjugated system forms a stable complex system with alkali and some transition metals. The results of vibrational analysis for C₈H₈M₂ (M = Na, K) complexes were reported here. The geometries of C₈H₈M₂ (M = Na, K) were optimized using ab initio (HF, MP2, CCSD(T)) and DFT (B3LYP) methods with 6-311G** and 6-311++G** basis sets and the harmonic frequencies were obtained. To reproduce and compare with the experimental values the structurally similar molecules C₅H₅M (M = Na, K) and benzene were studied. The scale factors obtained from these systems were applied to predict the experimental frequencies of C₈H₈M₂ (M = Na, K). The force field and vibrational spectra are analyzed and the most probable assignments are proposed for all the fundamentals based on the potential energy distribution.     

C2H3自由基与O2反应的红外发射光谱及反应通道

The reaction of vinyl radicals with oxygen was investigated by Time-Resolved Fourier Transform infrared emission spectroscopy. The radicals were produced by the pulsed laser photolysis of C_2H_3Br at 248 nm. Vibrationally excited products of H_2CO(v1), HCO(v3), CO_2(v3, v), CH_3(v3), C_2H_2(v3), HO_2(v1), C_2H_2O_2(v3+v11), CO(v) formed in the C2H3+O_2 reaction have been observed. Four elementary reaction channels have been verified.     

Effect of conversion of NO2 into no on the catalytic reduction of NO2 with C3H6 in excess O2

During the reduction of NO₂ by C₃H₆ in O₂ over alumina-supported Au, Rh and Pt it was found that three parallel reactions take place,i.e., reduction of NO₂ to N₂ and N₂O, partial decomposition of NO₂ to NO and oxidation of C₃H₆ to CO and CO₂. In the absence of C₃H₆, the NO₂→NO+O₂ reaction reaches a fast equilibrium on Rh and Pt but not on Au and γ-Al₂O₃. Addition of C₃H₆ to the NO₂+O₂ mixture leads to the formation of NO above equilibrium conversion levels.     

磁场诱导下Fe3S4向FeS2转化速率的增加

以FeCl₃和CH₄N₂S为主要原料，在0.2～0.4 T的外加磁场强度下，温度为170 ℃的反应体系中研究了磁场对前驱物Fe₃S₄转化成FeS₂过程的影响。结果表明，Fe₃S₄到FeS₂的转化率是与磁场强度有关的。Fe₃S₄的硫化过程可能是通过溶解-再结晶机理。外加磁场的存在可以促进物质的传输过程，从而加速前驱物的溶解和再结晶过程，导致和没有外加磁场相比Fe₃S₄到FeS₂的转化率的增加。     

Comparative Studies on the Deactivation and Regeneration of TiO2 Nanoparticles in Three Photocatalytic Oxidation Systems: C7H16, SO2, and C7H16-SO2

Three photocatalytic oxidation (PCO) systems: C₇H₁₆-O₂, SO₂-O₂ and C₇H₁₆-SO₂-O₂ were carried out with the aid of UV-illuminated TiO₂ nanoparticles at room temperature in a batch reactor. In C₇H₁₆-O₂-TiO₂ system, no catalyst deactivation was observed, while for SO₂-O₂-TiO₂ and C₇H₁₆-SO₂-O₂-TiO₂ systems, the photocatalytic activity of used TiO₂ powder showed decreasing and eventually no activity after used consecutively. The reaction products such as sulfur trioxide or sulfuric acid adsorbed onto the surface of TiO₂ catalyst were poisoning species. Photocatalytic activity of the deactivated TiO₂ powder could be regenerated by sonicating treatment with water and methanol for the two systems, respectively.     

g-C3N4/Bi2O2CO32D纳米片复合材料的制备及可见光催化性能研究

采用自组装和化学沉淀法分别制得两种可见光驱动复合材料石墨相氮化碳/碳酸氧铋(g-C_3N_4/Bi_2O_2CO_3).采用X射线衍射光谱(XRD),紫外可见光谱、扫描电镜(SEM)、N_2吸附、电化学阻抗谱(EIS)和X射线光电子能谱(XPS)等分析手段对制备的催化剂进行了表征.结果表明,制备方法对纳米复合材料的晶相、形态及光学性能没有影响,但是影响g-C_3N_4和Bi_2O_2CO_3之间的相互作用力,导致光生电子-空穴对的分离速率存在显著差异.以可见光驱动苯酚和罗丹明B的降解实验为探针反应检测催化剂的光催化性能.实验结果表明自组装法得到的异质结催化剂中相互作用力更强,催化效果最高.O_2-是罗丹明B降解反应的主要活性物种,染料的光敏化、Bi_2O_2CO_3与g-C_3N_4综合效应,导致光生载流子电荷分离效率更高.