Electrochemical Derivatization of Acetaminophen for Indirect Determination of Eflornithine Using β‐CD Modified Glassy Carbon Electrode

In the present work, the oxidation of acetaminophen in the absence and presence of eflornithine was electrochemically investigated by means of cyclic voltammetry at a glassy carbon electrode (GCE). Our results indicate that N‐acetyl‐p‐benzoquinone imine (NAPQI) produced from two‐electron electrochemical oxidation of acetaminophen participates in a Michael addition reaction with eflornithine via an ECE mechanism. This fact was used for the determination of eflornithine using differential pulse voltammetry (DPV) technique on the surface of β‐Cyclodextrin modified glassy carbon (β‐CD/GC) electrode. β‐CD/GC electrode was prepared through an electrodeposition procedure and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), Cyclic Voltammetry (CV), Field Emission Scanning Electron Microscopy (FESEM) and Energy‐dispersive X‐ray spectroscopy (EDS) techniques. Under optimum conditions, the β‐CD/GC electrode showed a good linearity as a function of the eflornithine concentration over the range from 5 to 100 μM with detection limit and quantification limit of 1.94 and 5.8 μM, respectively. Finally, the proposed protocol was confirmed to be successful in determination of eflornithine in human urine samples with good recovery, ranging from 97.2 % to 104.8 %.     

Optimization of an Electrochemical Sensor for Determination of Imidacloprid Based on β‐cyclodextrin Electropolymerization on Glassy Carbon Electrode

An electrochemical sensor based on electropolymerization of β‐cyclodextrin (β‐CD) on a glassy carbon electrode (GCE) was developed for the determination of imidacloprid (IMP). That insecticide is the most commonly used insecticides globally and has been related to the death of bee colonies around the world are imperative. So the development of a simple, cheap and sensitive method for IMP determination is essential. This work aims the modification of a GCE by β‐CD film. The analytical response obtained with GCCE/β‐CD in the presence of the IMP showed an increase in the peak current variation of 947 % in relation to the bare GCE, indicating that the analyte was encapsulated in the β‐CD increasing the detection sensitivity. The followed experimental conditions were optimized: potential range (−1.3 to 0.9 V), presence or absence of dissolved oxygen (presence) and stirring during the electropolymerization (with agitation), number of cycles (5 scans), electrolyte pH (pH=5.0), scan rate (100 mV s⁻¹) and concentration of β‐CD (6 mol L⁻¹). The optimization promoted a peak current variation increase of 57 %, developing a more sensitivity methodology.     

Electrocatalytic and Analytical Response of β‐Cyclodextrin Incorporated Carbon Nanotubes‐Modified Electrodes Toward Guanine

The utility of β‐cyclodextrin incorporated carbon nanotubes‐modified electrodes (β‐CD/CNT/E) for electrocatalytic oxidation of guanine in aqueous solution is demonstrated. Compared to the conventional electrode, it lowers the overpotential and enhances the peak current significantly. The action mechanism of β‐CD/CNT/E was discussed systemically. The results demonstrated that the use of β‐CD/CNT/E clearly provides an effective methodology for the determination of guanine. Based on the signal of guanine, an estimate of DNA concentration can be recognized with a limit of detection of 10 ng mL^?1.     

β‐Cyclodextrin Incorporated Carbon Nanotube Paste Electrode as Electrochemical Sensor for Nifedipine

In this work a carbon paste electrode modified with multiwalled carbon nanotubes/β‐cyclodextrin (MWCNTs/β‐CD) was constructed and applied to the determination of nifedipine. The electrochemical behavior of nifedipine at this electrode was investigated using cyclic voltammetry and differential pulse voltammetry. Characterization of the modified electrode was conducted with electrochemical impedance spectroscopy and scanning electron microscopy. After adsorption of nifedipine on the MWCNTs/β‐CD paste electrode at 0.0 V for 6 min, a well defined reduction peak was produced in sodium hydroxide of 0.05 M. The calibration curve was linear from 7.0×10^?8 to 1.5×10^?5 M. The detection limit was obtained as 2.5×10^?8 M. The results demonstrated that this electrochemical sensor has excellent sensitivity and selectivity. This sensor was applied for determination of nifedipine in drug dosage and blood serum with excellent recoveries.     

Rapid and Sensitive Determination of Dinotefuran Residue Based on Electrochemical Enhancement of β‐cyclodextrin‐Graphene Composite

A rapid method for sensitive voltammetric determination of dinotefuran residue was reported. The proposed method was based on the electrocatalytic reduction of dinotefuran on β‐cyclodextrin‐graphene composite modified glassy carbon electrode (β‐CD‐rGO/GCE), giving rise to a higher reduction signal to dinotefuran relative to the bare (GCE) and graphene modified electrode (rGO/GCE). Moreover, a further signal enhancement was observed when the modified electrode incubated in solution at low temperature (0 °C) for a short time. The reduction mechanism and binding affinity were also discussed. The external standard calibration curve was obtained from linear sweep voltammetry in the range of 0.5 to 16.0 μM with a detection limit of 0.10 μM. In addition to optimization of pretreatment, this electrochemical method has been applied to the dinotefuran residue determination in millet samples with the detection limit of 0.01 mg kg^?1 and compared with an high performance liquid chromatography method. The proposed electrode and analysis methods were proven to be sensitive, accurate and rapid under the used conditions.     

Fabrication of β‐Cyclodextrin/Glycine/Carbon Nanotubes Electrochemical Neurotransmitters Sensor – Application in Ultra‐sensitive Determination of DOPAC in Human Serum

In this work, an electrochemical sensor was constructed by applying two successive thin layers of glycine‐carbon nanotubes mixture and β‐cyclodextrin (CNTs‐Gly)/CD over glassy carbon electrode surface for some neurotransmitters determination. A host‐guest interaction between CD and neurotransmitters molecules is expected and resulted in enhanced sensitivity, selectivity and stability of sensor response. Other components of the sensor are crucial for the unique electrochemical response. Carbon nanotubes allowed large surface area for glycine distribution that provided hydrogen bonding to CD moieties and contributed to facilitated charge transfer. It was possible to determine 3,4‐dihydroxy phenyl acetic acid (DOPAC) in the linear range of 0.1 μmol L⁻¹ to 80 μmol L⁻¹ with detection limit of 9.40 nmol L⁻¹, quantification limit of 31.5 nmol L⁻¹ and sensitivity of 4.16 μA/μmol L⁻¹. The proposed sensor was applied in synthetic cerebrospinal fluids samples using random standard addition method. Also, the proposed sensor was used to determine DOPAC in presence of common interferences and acceptable recovery results were achieved for its analysis in real blood serum. Figures of merit for (CNTs‐Gly)/CD composite in terms of precision, robustness, repeatability and reproducibility were reported.     

Synthesis of β,γ‐Unsaturated Acids from Allenes and Carbon Dioxide

Hidden talent : Often perceived to be too thermodynamically and kinetically inert to be a useful chemical feedstock, carbon dioxide adds to allenes under exceptionally mild reductive conditions in the presence of a palladium pincer complex to give β,γ‐unsaturated carboxylic acids (see scheme). This transformation is discussed in the context of the requirements for CO₂ fixation. DMF=N,N‐dimethylformamide, Tf=trifluoromethanesulfonyl.

     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

Electrochemical Sensor for Sensitive Determination of Ga(III) Ion Based on β‐Cyclodextrin Incorporated Multi‐walled Carbon Nanotubes and Imprinted Sol‐gel Composite Film

A novel sensor for detection of trace gallium ion [Ga(III)] was created by stepwise modification of a gold electrode with β‐cyclodextrin (β‐CD)/multi‐walled carbon nanotubes (MWCNTs) and an ion imprinted polymer (IIP). The sensor surface morphology was characterized by scanning electron microscopy. The electrochemical performance of the imprinted sensor was investigated by cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The sensor displayed excellent selectivity towards the target Ga(III) ion. Meanwhile, the introduced MWCNTs displayed noticeable catalytic activity, and β‐CD demonstrated significant enrichment capacity. A linear calibration curve was obtained covering the concentration range from 5.0×10^?8 to 1.0×10^?4 mol·L^?1, with a detection limit of 7.6×10^?9 mol·L^?1. The proposed sensor was successfully applied to detect Ga(III) in real urine samples.     

Chiral separation of cathinone derivatives using β‐cyclodextrin‐assisted capillary electrophoresis–Comparison of four different β‐cyclodextrin derivatives used as chiral selectors

In the past decade, more than 100 different cathinone derivatives slopped over entire Europe due to their enormous popularity. Generally, these novel psychoactive substances are easily available via the internet. This fact leads to various social problems, since cathinones are substances with consciousness‐changing effects and are mainly misused for recreational matters by their consumers. Cathinones possess a chiral center including two enantiomeric forms with potentially different pharmacological behavior. This fact makes analytical method development regarding their chiral separation indispensable. In this study, a chiral capillary zone electrophoresis method for the enantioseparation of 61 cathinone and pyrovalerone derivatives was developed by means of four different β‐cyclodextrin derivatives. As chiral selectors, native β‐cyclodextrin as well as three of its derivatives namely acetyl‐β‐cyclodextrin, 2‐hydroxypropyl‐β‐cyclodextrin, and carboxymethyl‐β‐cyclodextrin were used. The cathinone and pyrovalerone derivatives were either purchased in internet stores or seized by police. As a result, overall 58 of 61 studied substances were partially or baseline separated by at least one of the four chiral selectors using 10 mM of β‐cyclodextrin derivative in a 10 mM sodium phosphate buffer (pH 2.5). Furthermore, the method was found to be suitable for simultaneous enantioseparations, for enantiomeric purity checks and to differentiate between positional isomers. Moreover, an intra‐ and an interday validation was performed successfully for each chiral selector to prove the robustness of the method.     

Interaction of β‐Cyclodextrin with Cetyltrimethylammonium Bromide in the Presence of Neutral Red and Its Application to the Spectrophotometric Determination of β‐Cyclodextrin

The effects of addition of β‐cyclodextrin (β‐CD) to the neutral red‐cetyltrimethylammonium bromide (CTAB) associates in pH 7 phosphate buffer solutions were investigated. Addition of β‐CD to neutral red‐CTAB association causes decomposition of the associate by displacement of neutral red with β‐CD. The inclusion complex of CTAB with β‐CD is more stable than that with neutral red. The results indicate that formation of inclusion complex of CTAB with β‐CD prevents its association with neutral red, and inclusion complex formation of β‐CD and neutral red in the presence of CTAB takes place after total consumption of CTAB. The competition of β‐CD and neutral red on the interaction with CTAB can be used for the simple, rapid and sensitive spectrophotometric determination of β‐CD.     

Carbon Nanomaterials‐based Electrochemical Immunoassay with β‐Galactosidase as Labels for Carcinoembryonic Antigen

In this study, a novel signal‐amplified strategy for sensitive electrochemical sandwiched immunoassay of carcinoembryonic antigen (CEA) was constructed based on aminofunctionalized graphene oxide (GO‐NH₂) supported AgNPs used as catalytic labels of secondary anti‐CEA and β‐galactosidase (β‐Gal), Meanwhile, sulfhydrylation single‐wall carbon nanotubes (SWCNTs‐SH) as substrate materials embellished gold electrode through Au‐SH and connected with gold nanoparticles to form anti‐CEA/AuNPs/SWCNTs‐SH/Au sensing platform through layer‐by‐layer. In the presence of analyte CEA, a sandwich‐type immunoassay format was employed for determination of CEA by using the labeled β‐Gal toward the reduction of p‐aminophenyl galactopyranoside (PAPG) and the redox reaction of AgNPs. Under optimal conditions, the increase in the current was proportional to the concentration of CEA from 0.1 pg/mL to 200 ng/mL. The detection limit (LOD) was 0.036 pg/mL CEA at 3σ. The electrochemical immunoassay displayed an acceptable precision, selectivity, stability. Clinical serum specimens were assayed with the method, and the results were in acceptable agreement with those obtained from the referenced electrochemiluminescent method.     

β‐Methylumbelliferone Surface Modification and Permeability Investigations at PENTEL™ Graphite Electrodes

Electrochemical and micro‐imaging analysis of a commercial graphite‐composite material is presented following electro‐oxidation with β‐methylumbelliferone. Charge‐transfer surface modification was observed for the graphite electrode, presumed to have arisen from adsorbed interfacial umbelliferone moieties. The molecular permeability of the new surface towards a range of similar, yet size‐variable (23 ų–136 ų) molecular redox probes is discussed. Red‐shift fluorescence in confocal microscopy offers further support for the presence of a surface‐bound umbelliferone layer. An SEM‐platinum profiling technique was used as an imaging tool to map the umbelliferone surface and size‐distribution of electro‐active sites.     

β-环糊精与有机胺之间包合作用的理论与实验研究

通过实验和理论计算方法研究了β-环糊精(CD)与乙二胺1及它的三个类似物: 二乙烯三胺2、三乙胺3和乙二胺四乙酸4之间的包合作用. 利用旋光法确定了β-CD与客体分子形成1:1型主–客体包合物, 在298.2 K下测定了包合物在水中的稳定常数(K). 采用半经验PM3方法考察了β-CD与短链脂肪胺1~7、环状脂肪胺8~11以及芳香胺12~13的分子间结合能力, 报道了β-CD与这些客体分子间的包合络合过程并讨论了这些包合体系之间的包合差异性. 变形能和水合能对包合体系的相互作用能的贡献均相当小. β-CD包合物的稳定性取决于主、客体分子之间的尺寸匹配. 对于β-CD与客体1~4形成的包合物而言, 旋光法测定的包合物的K值的顺序与PM3计算得到的包合物络合能绝对值的排序有很好的一致性.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Synthesis of new optically active α,α′,β‐trisubstituted‐β‐lactones as monomers for stereoregular biopolyesters

Various optically active (4R)‐alkyloxycarbonyl‐3,3‐dialkyl‐2‐oxetanones as monomers were synthesized from L‐(S)‐malic acid in six steps to prepare a new family of stereopolyesters for biomedical applications. The synthesis began with an esterification followed of a dialkylation in the aim to introduce hydrophobic groups as methyl or reactive group as allyl. Then, a saponification has permitted to obtain the corresponding diacids that reacted with appropriate alcohols to furnish different monoesters. The last and most important step was activation of hydroxyl group of monoesters with the asymmetric carbon configuration inversion according to the Mitsunobu reaction. Thus, this reaction has provided lactones from monoesters with 100% enantiomeric excess which was confirmed by ¹H NMR and by the synthesis of corresponding isotactic and semicrystalline homopolyesters. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2586–2597     

Veronicafolin－β-环糊精的物化表征及Veronicafolin－羟丙基-β-环糊精包合物溶解性的增强

用氢谱、红外光谱、X-射线粉末衍射、热分析、元素分析等测试方法研究了Veronicafolin (3,5,4′-三羟基-6,7,3′-三甲氧基黄酮) 和β-环糊精 (β-CD) 的固体包合物的谱学特征。元素分析结果显示形成Veronicafolin-β-CD·20H2O包合物，其中C：39.58%, H: 5.75%，表明包合物中主客体比为1∶1。该包合类型属于A_L-型。通过紫外-可见分光光度法研究了在羟丙基-β-环糊精（HP-β-CD）的存在下Veronicafolin的相溶解度曲线，测得校正曲线为y = 24148x + 0.0075 (r=0.9999)，相溶解曲线为y=0.4738x-2.0×10^-7 (r=0.9490)，包结平衡常数Ks为4.5×10⁶mol-1。HP-β-CD提高了黄酮醇Veronicafolin的溶解度。