Synthesis of Novel CuO Nanosheets with Porous Structure and Their Non‐Enzymatic Glucose Sensing Applications

Novel CuO thin films composed of porous nanosheets were in situ formed on indium tin oxide (ITO) by a simple, low temperature solution method, and used as working electrodes to construct nonenzymatic glucose sensor after calcinations. Cyclic voltammetry revealed that the CuO/ITO electrode calcinated at 200 °C exhibited better electrocatalytic activity for glucose. For the amperometric glucose detection, such prepared electrode showed low operating potential of 0.35 V and high sensitivity of 2272.64 μA mM^?1 cm^?2. Moreover, the CuO/ITO electrode also showed good stability, reproducibility and high anti‐interference ability. Thus, it is a promising material for the development of non‐enzymatic glucose sensors.     

Synthesis of flower-like cuo hierarchical nanostructures as an electrochemical platform for glucose sensing

Flower-like CuO hierarchical nanostructures were synthesized on copper foil substrate through a simple wet chemical route in alkaline media at room temperature. SEM images collected at different reaction times revealed the transformation of initially formed Cu(OH)₂ nanowires to flower-like CuO nanostructures. The hierarchical structure of the as-prepared CuO showed high electrocatalytic activity towards the oxidation of glucose making it a promising electrode material for the development of non-enzymatic glucose sensor. The amperometric sensor exhibited a wide linear response to glucose ranging from 4.5 × 10^?5 to 1.3 × 10^?3 mol L^?1 (R ² = 0.99317) at fixed potential of 0.3 V. The detection limit was 6.9 × 10^?6 mol L^?1 (LOD = 3σ/s) with a sensitivity of 1.71 μA μmol^?1 cm^?2. Moreover, the developed sensor offers a fast amperometric response, good selectivity and stability.     

Urea Assisted Synthesis of Flower Like CuO Nanostructures and Their Chemical Sensing Application for the Determination of Cadmium Ions

The novel nanostructures of CuO with improved morphology are strongly required for the development of devices with enhanced performance. In this study flower like nanostructures of CuO are synthesized by hydrothermal method using urea as tuning material for the morphology of CuO during the growth process. Scanning electron microscopy (SEM) and X‐ray diffraction (XRD) techniques were used for the characterization of these nanostructures. The nanostructures are highly dense, uniform and well aligned on the gold coated glass substrate. Moreover, CuO nanostructures exhibited pure phase of CuO. These novel CuO nanostructures were potentially used for the construction of cadmium ion sensor by functionalizing with tetrathia‐12‐crown‐4 a selective cadmium ion ionophore. The proposed cadmium ion sensor has detected the wide range of cadmium ion concentrations from 1.0×10^?9–1.0×10^?1 M with a sensitivity of 29.3±0.3 mV/decade and also a fast response time of less than 10.0 s is demonstrated. CuO nanostructures based cadmium ion selective electrode has also shown excellent reproducibility, repeatability, selectivity, and stability. The sensor electrode was also used as indicator electrode for the confirmation of practical utility and the obtained result describes the good behavior of the sensor in the potentiometric titration for the determination of cadmium ions.     

Preparation and Electrocatalytic Performance of Functionalized Copper‐Based Nanoparticles Supported on the Gold Surface

Copper nanoparticles (CuNPs) encapsulated by polymeric stabilizer of polyvinylpyrrolidone (PVP) (noted as PVP‐CuNPs) were simply prepared and used to construct an enzymeless glucose sensor on a solid substrate. Sensing and assay performance of the CuNPs‐based sensor to glucose were evaluated in detail. Cyclic voltammetry (CV), chronoamperometry (I–t) and flow injection amperometry (FIA) revealed a high sensitivity, excellent stability, and good reproducibility in the glucose determination at +0.45 V, which was 200 mV more negative than those in former reports. A detection limit as low as 1.0×10^?8 M (signal‐to‐noise=3) and a linear range of 1.0×10^?7 M to 5.0×10^?3 M were obtained in this study.     

Generalized Low‐Temperature Fabrication of Scalable Multi‐Type Two‐Dimensional Nanosheets with a Green Soft Template

Two‐dimensional nanosheets with high specific surface areas and fascinating physical and chemical properties have attracted tremendous interests because of their promising potentials in both fundamental research and practical applications. However, the problem of developing a universal strategy with a facile and cost‐effective synthesis process for multi‐type ultrathin 2 D nanostructures remains unresolved. Herein, we report a generalized low‐temperature fabrication of scalable multi‐type 2 D nanosheets including metal hydroxides (such as Ni(OH)₂, Co(OH)₂, Cd(OH)₂, and Mg(OH)₂), metal oxides (such as ZnO and Mn₃O₄), and layered mixed transition‐metal hydroxides (Ni‐Co LDH, Ni‐Fe LDH, Co‐Fe LDH, and Ni‐Co‐Fe layered ternary hydroxides) through the rational employment of a green soft‐template. The synthesized crystalline inorganic nanosheets possess confined thickness, resulting in ultrahigh surface atom ratios and chemically reactive facets. Upon evaluation as electrode materials for pseudocapacitors, the Ni‐Co LDH nanosheets exhibit a high specific capacitance of 1087 F g^?1 at a current density of 1 A g^?1, and excellent stability, with 103 % retention after 500 cycles. This strategy is facile and scalable for the production of high‐quality ultrathin crystalline inorganic nanosheets, with the possibility of extension to the preparation of other complex nanosheets.     

MOF‐Derived Spinel NiCo2O4 Hollow Nanocages for the Construction of Non‐enzymatic Electrochemical Glucose Sensor

Non‐enzymatic glucose sensor is greatly expected to take over its enzymatic counterpart in the future. In this paper, we reported on a facile strategy to construct a non‐enzymatic glucose sensor by use of NiCo₂O₄ hollow nanocages (NiCo₂O₄ HNCs) as catalyst, which was derived from Co‐based zeolite imidazole frame (ZIF‐67). The NiCo₂O₄ HNCs modified glassy carbon electrode (NiCo₂O₄ HNCs/GCE), the key component of the glucose sensor, showed highly electrochemical catalytic activity towards the oxidation of glucose in alkaline media. As a result, the proposed non‐enzymatic glucose sensor afforded excellent analytical performances assessed with the aid of cyclic voltammetry and amperometry (i–t). A wide linear range spanning from 0.18 μΜ to 5.1 mM was achieved at the NiCo₂O₄ HNCs/GCE with a high sensitivity of 1306 μA mM^?1 cm^?2 and a fast response time of 1 s. The calculated limit of detection (LOD) of the sensor was as low as 27 nM (S/N=3). Furthermore, it was demonstrated that the non‐enzymatic glucose sensor showed considerable anti‐interference ability and excellent stability. The practical application of the sensor was also evaluated by determination of glucose levels in real serum samples.     

Highly Sensitive Nonenzymatic Glucose Sensor Based on 3D Ultrathin NiFe Layered Double Hydroxide Nanosheets

As a promising electrode material, Ni‐based nanomaterials exhibit a remarkable electrochemical catalytic activity for nonenzymatic glucose sensors. In this paper, Nickel–Iron layered double hydroxide (NiFe‐LDH) film electrode with ultrathin nanosheets and porous nanostructures was synthesized directly on Ni foam (NF) by a one‐step hydrothermal method. The as‐obtained NiFe‐LDH electrode was adopted for glucose detection without further treatment. As an integrated binder‐free electrode for glucose sensor, the NiFe‐LDH/NF hybrid exhibits a superior sensitivity of 3680.2 μA mM⁻¹ cm⁻² with a low limit of detection (0.59 μM, S/N=3) as well as fast response time (<1 s). An excellent selectivity from potential interference species such as ascorbic acid, uric acid and Cl⁻ ions and acceptable stability were also achieved. The outstanding performance can be ascribed to the abundant electrochemistry active sites, facilitative diffusion of the electrolyte, high electron transfer rate and reliable stability architecture. Therefore, the NiFe‐LDH nanosheets demonstrate potential application in non‐enzymatic sensory of glucose.     

Hydrothermal Synthesis of a rGO Nanosheet Enwrapped NiFe Nanoalloy for Superior Electrocatalytic Oxygen Evolution Reactions

Graphene‐based hybrid nanostructures possess many advantages in the field of electrochemical energy applications. In this work, a facile and efficient hydrothermal approach has been developed for the preparation of NiFe alloy nanoparticles/rGO hybrid nanostructures, in which the nanoparticles are well combined with rGO nanosheets and the size of the nanoparticles is about 100 nm. Moreover, the electrochemical oxygen evolution reaction (OER) tests confirmed that the obtained NiFe/rGO hybrid nanostructures possess notably higher activity than both the rGO‐free NiFe nanoparticles and pure Ni/rGO hybrids, and the optimal NiFe ratio is 2:1. The OER overpotential at 20 mA cm^?1?2 with Ni₂Fe/rGO is as low as 0.285 V, which is 96 mV lower than that of pure Ni/rGO hybrids. Meanwhile, the Ni₂Fe/rGO catalyst has excellent stability. Therefore, this work contributes a facile and efficient method to prepare a NiFe alloy nanoparticles/rGO hybrid structure for potential applications in the field of electrochemical energy devices, such as electrochemical water splitting cells, rechargeable metal/air batteries, etc.     

Superior Lithium‐Ion Storage Properties of Mesoporous CuO–Reduced Graphene Oxide Composite Powder Prepared by a Two‐Step Spray‐Drying Process

Mesoporous CuO–reduced graphene oxide (rGO) composite powders were prepared by using a two‐step spray‐drying process. In the first step, hollow CuO powders were prepared from a spray solution of copper nitrate trihydrate with citric acid and were wet milled to obtain a colloidal spray solution. In the second step, spray drying of the colloidal solution that contained dispersed GO nanosheets produced mesoporous CuO–rGO composite powders with particle sizes of several microns. Thermal reduction of GO nanosheets to rGO nanosheets occurred during post‐treatment at 300 °C. Initial discharge capacities of the hollow CuO, bare CuO aggregate, and CuO–rGO composite powders at a current density of 2 A g^?1 were 838, 1145, and 1238 mA h g^?1, respectively. Their discharge capacities after 200 cycles were 259, 380, and 676 mA h g^?1, respectively, and their corresponding capacity retentions measured from the second cycle were 67, 48, and 76 %, respectively. The mesoporous CuO–rGO composite powders have high structural stability and high conductivity because of the rGO nanosheets, and display good cycling and rate performances.     

Three‐Dimensional MoS2 Hierarchical Nanoarchitectures Anchored into a Carbon Layer as Graphene Analogues with Improved Lithium Ion Storage Performance

Much attention has recently been focused on the synthesis and application of graphene analogues of layered nanomaterials owing to their better electrochemical performance than the bulk counterparts. We synthesized graphene analogue of 3D MoS₂ hierarchical nanoarchitectures through a facile hydrothermal route. The graphene‐like MoS₂ nanosheets are uniformly dispersed in an amorphous carbon matrix produced in situ by hydrothermal carbonization. The interlaminar distance between the MoS₂ nanosheets is about 1.38 nm, which is far larger than that of bulk MoS₂ (0.62 nm). Such a layered architecture is especially beneficial for the intercalation and deintercalation of Li⁺. When tested as a lithium‐storage anode material, the graphene‐like MoS₂ hierarchical nanoarchitectures exhibit high specific capacity, superior rate capability, and enhanced cycling performance. This material shows a high reversible capacity of 813.5 mAh g^?1 at a current density of 1000 mA g^?1 after 100 cycles and a specific capacity as high as 600 mAh g^?1 could be retained even at a current density of 4000 mA g^?1. The results further demonstrate that constructing 3D graphene‐like hierarchical nanoarchitectures can effectively improve the electrochemical performance of electrode materials.     

A Novel Cerium Tungstate Nanosheets Modified Electrode for the Effective Electrochemical Detection of Carcinogenic Nitrite Ions

In this present scenario, for the first time, we propose a facile and simple wet chemical approach for the fabrication of two‐dimensional (2D) cerium tungstate (CeW₂O₉;CeW) nanosheets and evaluated as an electrochemical sensor for the detection of nitrite ions. The successful formation of CeW₂O₉ nanosheets was confirmed by various physicochemical techniques such as X‐ray diffraction, Fourier transform infrared spectroscopy, Raman, Scanning electron microscope, Transmission electron microscope and Energy dispersive X‐ray studies. The electrochemical properties of the CeW nanosheets were studied by using cyclic voltammograms (CV) and chronoamperometric techniques. As an electrochemical sensor, the CeW nanosheets modified glassy carbon electrode (GCE) showed superior electrocatalytic activity in the oxidation of nitrite in terms of higher anodic peak current and lower oxidation potential when compared with unmodified GCE. CeW nanosheets based electrochemical sensor has been fabricated which detect nitrite in wide linear response range, good sensitivity and very low detection limit of 0.02–986 μM, 2.85 μA μM⁻¹ cm⁻² and 8 nM, respectively. Moreover, the CeW nanosheets modified GCE exhibited excellent selectivity even in the presence of common metal ions and biologically co‐interfering compounds. For the practical viability of the prepared amperometric sensor has been utilized in various water samples such as tap, lake and drinking water and the obtained recoveries are appreciable.     

Fabrication of Hierarchically Structured MOF‐Co3O4 on Well‐aligned CuO Nanowire with an Enhanced Electrocatalytic Property

Engineering appropriate shape and size of three‐dimensional inorganic nanostructures materials is of one the main critical problems in pursuing high‐performance electrode materials. Herein, we fabricate a metal‐organic framework derived cobalt oxide (Co₃O₄) are grown on copper oxide nanowire (CuO NWs) supported on the surface of 3D copper foam substrate. The highly aligned CuO NWs were prepared by using electrochemical anodization of copper foam in ambient temperature and followed by MOF Co₃O₄ was grown via a simple in situ solution deposition then consequent calcination process. The obtained binder‐free 3D CuO NWs@Co₃O₄ nanostructures were further characterized by using X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy, and transmission electron microscopy. Furthermore, electrochemical sensing of glucose was studied by using Cyclic Voltammetry, and chronoamperometry techniques. Interestingly, 3D CuO NWs@Co₃O₄ electrode exhibits excellent performance for the oxidation of glucose compared with individual entities. The proposed sensor shows wide linear ranges from 0.5 μM to 0.1 mM with the sensitivity of 6082 μA/μM and the lowest detection limit (LOD) of 0.23 μM was observed with the signal to noise ratio, (S/N) of 3. The superior catalytic oxidation of glucose mainly is endorsed by the excellent electrical conductivity and synergistic effect of the Co₃O₄ and CuO NWs.     

Enzymeless Electrochemical Glucose Sensor Based on Carboxylated Multiwalled Carbon Nanotubes Decorated with Nickel (II) Electrocatalyst and Self-assembled Molecularly Imprinted Polyethylenimine

In this paper a new enzymeless electrochemical glucose sensor based on carboxylated multiwalled carbon nanotubes (cMWCNT) with immobilized nickel (II) acetylacetonate (NiL) as electrocatalyst and molecularly imprinted polymer fabricated through electrostatic self-assembling of polyethyleneimine (PEI) crosslinked with glutaric dialdehyde (GDA). The electrocatalytic properties of NiL and PEI-cMWCNT, PEI-GDA and PEI-glucose interactions is studied for the first time. Developed sensor demonstrates excellent electrocatalytic activity towards glucose oxidation and possessing high stability, sensitivity of 5897.42±161.00 μA ⋅ mM⁻¹ cm⁻², LOD of 0.138 mM and high selectivity in the presence of creatinine, L-alanine, glycine, D-glutamine, uric acid, L-ascorbic acid, urea and BSA.     

Facile synthesis of CuO nanosheets as electrode for supercapacitor with long cyclic stability in novel methyl imidazole-based ionic liquid electrolyte

Hierarchical CuO nanosheets were synthesized through a facile, eco-friendly reflux deposition approach for supercapacitor electrode material for energy storage. The resultant CuO nanosheets were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption isotherm techniques. The supercapacitor behavior of CuO nanosheets was investigated by cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy in novel 0.1 M aqueous 1-(1′-methyl-2′-oxo-propyl)-3-dimethylimidazolium chloride [MOPMIM][Cl] ionic liquid as an electrolyte. The result demonstrate that CuO nanosheets exhibit specific capacitance of 180 F g^?1 at 10 mV s^?1 scan rate which is the highest value in ionic liquid electrolyte and 87% specific capacitance retention after 5000th cycle. The electrochemical performance proves CuO nanosheets as electrode with ionic liquid electrolyte for developing green chemistry approach in supercapacitor.

Open image in new window

Graphical abstract As-synthesized, CuO nanosheets demonstrate excellent supercapacitor electrode performance with high specific capacitance of 180 F g^?1 at 10 mV s^?1 scan rate and 87% specific capacitance retention in 0.1 M aqueous [MOPMIM][Cl] IL electrolyte

     

MnO2 Nanosheets Grown on Nitrogen‐Doped Hollow Carbon Shells as a High‐Performance Electrode for Asymmetric Supercapacitors

A hierarchical hollow hybrid composite, namely, MnO₂ nanosheets grown on nitrogen‐doped hollow carbon shells (NHCSs@MnO₂), was synthesized by a facile in situ growth process followed by calcination. The composite has a high surface area (251 m²g^?1) and mesopores (4.5 nm in diameter), which can efficiently facilitate transport during electrochemical cycling. Owing to the synergistic effect of NHCSs and MnO₂, the composite shows a high specific capacitance of 306 F g^?1, good rate capability, and an excellent cycling stability of 95.2 % after 5000 cycles at a high current density of 8 A g^?1. More importantly, an asymmetric supercapacitor (ASC) assembled by using NHCSs@MnO₂ and activated carbon as the positive and negative electrodes exhibits high specific capacitance (105.5 F g^?1 at 0.5 A g^?1 and 78.5 F g^?1 at 10 A g^?1) with excellent rate capability, achieves a maximum energy density of 43.9 Wh kg^?1 at a power density of 408 W kg^?1, and has high stability, whereby the ASC retains 81.4 % of its initial capacitance at a current density of 5 A g^?1 after 4000 cycles. Therefore, the NHCSs@MnO₂ electrode material is a promising candidate for future energy‐storage systems.     

One‐Step Electrodeposition of NiCo2S4 Nanosheets on Patterned Platinum Electrodes for Non‐Enzymatic Glucose Sensing

The preparation of NiCo₂S₄ (NCS) nanosheets on photolithographically patterned platinum electrodes by electrodeposition was explored. The as‐prepared nanosheets were systematically characterized by field‐emission scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and X‐ray photoelectron spectroscopy techniques. The NCS‐modified Pt electrode was used as a non‐enzymatic glucose sensor. The sensor response exhibited two linear regions in glucose concentration, with a limit of detection of 1.2 μm . The sensors showed that the as‐prepared NCS nanosheets have excellent electrocatalytic activity towards glucose with long stability, good reproducibility, and excellent anti‐interference properties, and thus, this material holds promise for the development of a practical glucose sensor.     

Glutaric Acid Assisted Fabrication of CuO Nanostructures and their Application in Development of Highly Sensitive Electrochemical Sensor System for Carbamates

This work describes the fabrication of unique arrow head shaped CuO nanostructures using simple hydrothermal treatment method. The highly attractive features were obtained by the application of glutaric acid utilised simultaneous as template and functionalising agent. The functionalised nanostructures were known to possess excellent potential towards the electro‐catalytic oxidation of carbofuran pesticide. The generated intense electrochemical signal with lower potential value enabled sensitive and selective determination of carbofuran up to 1×10^?3 µM with wide sensing window in range of 0.01 to 0.16 µM. The feasibility of the developed sensor system for the practical application was also studied by testing its potential in real sample extracts of various vegetables. The excellent recoveries demonstrated the analytical robustness of the developed sensor system. The sensor system utilises a new and simple approach towards sensitive determination of toxic pesticides reflecting its wide spectrum application in various fields.     

Rational Design of Ni Nanoparticles on N‐Rich Ultrathin Carbon Nanosheets for High‐Performance Supercapacitor Materials: Embedded‐ Versus Anchored‐Type Dispersion

Highly dispersed Ni nanoparticles (NPs) and abundant functional N‐species were integrated into ultrathin carbon nanosheets by using a facile and economical sol–gel route. Embedded‐ and anchored‐type configurations were achieved for the dispersion of Ni NPs in/on N‐rich carbon nanosheets. The anchored‐type composite exhibited outstanding pseudocapacitance of 2200 F g^?1 at 5 A g^?1 with unusual rate capability and extraordinary cyclic stability over 20 000 cycles with little capacitance decay. Aqueous asymmetric supercapacitors fabricated with this composite cathode demonstrated a high energy density of 51.3 Wh kg^?1 at a relatively large power density of 421.6 W kg^?1, along with outstanding cyclic stability. This approach opens an attractive direction for enhancing the electrochemical performances of metal‐based supercapacitors and can be generalized to design high‐performance energy‐storage devices.     

Hierarchical ZnCo2O4@NiCo2O4 Core–Sheath Nanowires: Bifunctionality towards High‐Performance Supercapacitors and the Oxygen‐Reduction Reaction

Increasing energy demands and worsening environmental issues have stimulated intense research on alternative energy storage and conversion systems including supercapacitors and fuel cells. Here, a rationally designed hierarchical structure of ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires synthesized through facile electrospinning combined with a simple co‐precipitation method is proposed. The obtained core–sheath nanostructures consisting of mesoporous ZnCo₂O₄ nanowires as the core and uniformly distributed ultrathin NiCo₂O₄ nanosheets as the sheath, exhibit excellent electrochemical activity as bifunctional materials for supercapacitor electrodes and oxygen reduction reaction (ORR) catalysts. Compared with the single component of either ZnCo₂O₄ nanowires or NiCo₂O₄ nanosheets, the hierarchical ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires demonstrate higher specific capacitance of 1476 F g^?1 (1 A g^?1) and better rate capability of 942 F g^?1 (20 A g^?1), while maintaining 98.9 % capacity after 2000 cycles at 10 A g^?1. Meanwhile, the ZnCo₂O₄@NiCo₂O₄ core–sheath nanowires reveal comparable catalytic activity but superior stability and methanol tolerance over Pt/C as ORR catalyst. The impressive performance may originate from the unique hierarchical core–sheath structures that greatly facilitate enhanced reactivity, and faster ion and electron transfer.