Investigation of multivalent interactions between conjugate of quantum dots with c‐Myc peptide tag and the anti‐c‐Myc antibody by capillary electrophoresis with fluorescence detection

Herein, we report an assay for detecting the binding of a multivalent peptide and antibody within a capillary with the use of fluorescence coupled capillary electrophoresis. Quantum dots and a c‐Myc tag containing peptide EQKLISEEDLG₄H₆ were injected sequentially and formed a multivalent quantum dot‐EQKLISEEDLG₄H₆ assembly within the capillary. The efficiency of the quantum dot‐peptide self‐assembly was affected by the peptide/quantum dot molar ratio, sampling time, and interval time. Finally, the binding of the monoclonal anti‐c‐Myc antibody and the multivalent quantum dot‐EQKLISEEDLG₄H₆ ligand was studied using an in‐capillary assay. The microscopic dissociation constant for the self‐assembly of monoclonal anti‐c‐Myc antibody and quantum dot‐EQKLISEEDLG₄H₆ was determined to be 14.1 μM with a stoichiometry of the peptide‐antibody complex of 1.7 determined after fitting this to the Hill equation. This method can be further extended to detect a wide range of biomolecule–biomolecule binding interactions.     

Synthesis,crystal structures and anti‐inflammatory activity of four 3,5‐bis(arylidene)‐N‐benzenesulfonyl‐4‐piperidone derivatives

3,5‐Bis(arylidene)‐4‐piperidone (BAP) derivatives display good antitumour and anti‐inflammatory activities because of their double α,β‐unsaturated ketone structural characteristics. If N‐benzenesulfonyl substituents are introduced into BAPs, the configuration of the BAPs would change significantly and their anti‐inflammatory activities should improve. Four N‐benzenesulfonyl BAPs, namely (3E,5E)‐1‐(4‐methylbenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one dichloromethane monosolvate, C₂₈H₂₁F₆NO₃S·CH₂Cl₂, ( 4 ), (3E,5E)‐1‐(4‐fluorobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one, C₂₇H₁₈F₇NO₃S, ( 5 ), (3E,5E)‐1‐(4‐nitrobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one, C₂₇H₁₈F₆N₂O₅S, ( 6 ), and (3E,5E)‐1‐(4‐cyanobenzenesulfonyl)‐3,5‐bis[4‐(trifluoromethyl)benzylidene]piperidin‐4‐one dichloromethane monosolvate, C₂₈H₁₈F₆N₂O₃S·CH₂Cl₂, ( 7 ), were prepared by Claisen–Schmidt condensation and N‐sulfonylation. They were characterized by NMR, FT–IR and HRMS (high resolution mass spectrometry). Single‐crystal structure analysis reveals that the two 4‐(trifluoromethyl)phenyl rings on both sides of the piperidone ring in ( 4 )–( 7 ) adopt an E stereochemistry of the olefinic double bonds. Molecules of both ( 4 ) and ( 6 ) are connected by hydrogen bonds into one‐dimensional chains. In ( 5 ) and ( 7 ), pairs of adjacent molecules embrace through intermolecular hydrogen bonds to form a bimolecular combination, which are further extended into a two‐dimensional sheet. The anti‐inflammatory activity data reveal that ( 4 )–( 7 ) significantly inhibit LPS‐induced interleukin (IL‐6) and tumour necrosis factor (TNF‐α) secretion. Most importantly, ( 6 ) and ( 7 ), with strong electron‐withdrawing substituents, display more potential inhibitory effects than ( 4 ) and ( 5 ).     

Design of Sensitive Biocompatible Quantum‐Dots Embedded in Mesoporous Silica Microspheres for the Quantitative Immunoassay of Human Immunodeficiency Virus‐1 Antibodies

A novel sandwich‐type electrochemiluminescence (ECL) immunosensor was developed to enable the sensitive detection of HIV‐1 antibodies. This system incorporated mesoporous silica (mSiO₂) complexed with quantum dots (QDs) and nano‐gold particles, which were assembled to enhance signal detection. Magnetic beads were used by immobilizing the secondary anti‐IgG antibody. This was first employed to capture HIV‐1 antibody (Ab) to form a Fe₃O₄/anti‐IgG/Ab complex. A high loading and signal‐enhanced nanocomposite (hereafter referred to as Au‐mSiO₂‐CdTe) was used as a HIV‐1 antigen label. The Au‐mSiO₂‐CdTe nanocomposite was conjugated with the Fe₃O₄/anti‐IgG/Ab complex to form an immunocomplex (hereafter referred to as Fe₃O₄/anti‐IgG/Ab/HIV‐1/CdTe‐mSiO₂‐Au). This complex could be further separated by an external magnetic field to produce ECL signals. Due to the large specific surface area and pore volume of mSiO₂, the loading of the CdTe QDs was markedly increased. Thus, the loaded QDs released a powerful chemiluminescent signal with a concordantly increased sensitivity of the immunosensor. The immunosensor was highly sensitive, and displayed a linear range of responses for HIV‐1 antibody across a dilution range of 1 : 1500 through 1 : 50 with the detection limit of 1 : 4500. The immunoassay can be a promising candidate in early diagnosis of HIV infection.     

A Novel Chemiluminescence Immunoassay Using Solid‐Phase Antigen for Free 17β‐Estradiol in Human Serum

A high‐performance chemiluminescence immunoassay, with long‐term durability, good precision and time‐saving, was proposed for the detection of free 17β‐estradiol (E₂) in human serum. Ninety‐six microplates were coated with bovine serum albumin conjugated E₂ antigen as solid phase for the immunoassay. The E₂‐BSA antigen coated on the microplate and the E₂ antigen in the sample competed for the binding sites on the horseradish peroxidase (HRP) labeled anti‐E₂ antibody. Chemiluminescence reaction was subsequently carried out by HRP catalyzing luminol‐H₂O₂ substrates, and the chemiluminescence intensity was inversely proportional to the amount of analyte in human sera samples. The concentration of immunoreagents, immunoreaction time, and other relevant variable conditions upon the immunoassay were studied and optimized. The proposed method exhibited detection limit as low as 5.94×10^?3 µg·L^?1 in a linear detection range from 0.01 to 1.00 µg·L^?1, good recoveries between 105% and 108%, and high precision with intra‐ and inter‐assay coefficients between 7.9% and 14.3%.     

Affinity capillary electrophoresis for the assessment of binding affinity of carbohydrate‐based cholera toxin inhibitors

Developing tools for the study of protein carbohydrate interactions is an important goal in glycobiology. Cholera toxin inhibition is an interesting target in this context, as its inhibition may help to fight against cholera. For the study of novel ligands an affinity capillary electrophoresis (ACE) method was optimized and applied. The method uses unlabeled cholera toxin B‐subunit (CTB) and unlabeled carbohydrate ligands based on ganglioside GM1‐oligosaccharides (GM1os). In an optimized method at pH 4, adsorption of the protein to the capillary walls was prevented by a polybrene‐dextran sulfate‐polybrene coating. Different concentrations of the ligands were added to the BGE. CTB binding was observed by a mobility shift that could be used for dissociation constant (K_d) determination. The K_d values of two GM1 derivatives differed by close to an order of magnitude (600 ± 20 nM and 90 ± 50 nM) which was in good agreement with the differences in their reported nanomolar IC₅₀ values of an ELISA‐type assay. Moreover, the selectivity of GM1os towards CTB was demonstrated using Influenza hemagglutinin (H5) as a binding competitor. The developed method can be an important platform for preclinical development of drugs targeting pathogen‐induced secretory diarrhea.     

Stereo‐Inversion in the (4R)‐γ‐Decanolactone Synthesis by Saccharomyces cerevisiae: (2E,4S)‐4‐Hydroxydec‐2‐enoic Acid Acts as a Key Intermediate

Methyl (2E,4R)‐4‐hydroxydec‐2‐enoate, methyl (2E,4S)‐4‐hydroxydec‐2‐enoate, and ethyl (±)‐(2E)‐4‐hydroxy[4‐²H]dec‐2‐enoate were chemically synthesized and incubated in the yeast Saccharomyces cerevisiae. Initial C‐chain elongation of these substrates to C₁₂ and, to a lesser extent, C₁₄ fatty acids was observed, followed by γ‐decanolactone formation. Metabolic conversion of methyl (2E,4R)‐4‐hydroxydec‐2‐enoate and methyl (2E,4S)‐4‐hydroxydec‐2‐enoate both led to (4R)‐γ‐decanolactone with >99% ee and 80% ee, respectively. Biotransformation of ethyl (±)‐(2E)‐4‐hydroxy(4‐²H)dec‐2‐enoate yielded (4R)‐γ‐[²H]decanolactone with 61% of the ²H label maintained and in 90% ee indicating a stereoinversion pathway. Electron‐impact mass spectrometry analysis (Fig. 4) of 4‐hydroxydecanoic acid indicated a partial C(4)→C(2) ²H shift. The formation of erythro‐3,4‐dihydroxydecanoic acid and erythro‐3‐hydroxy‐γ‐decanolactone from methyl (2E,4S)‐4‐hydroxydec‐2‐enoate supports a net inversion to (4R)‐γ‐decanolactone via 4‐oxodecanoic acid. As postulated in a previous work, (2E,4S)‐4‐hydroxydec‐2‐enoic acid was shown to be a key intermediate during (4R)‐γ‐decanolactone formation via degradation of (3S,4S)‐dihydroxy fatty acids and precursors by Saccharomyces cerevisiae.     

Hollow fiber liquid‐phase microextraction and determination of nonsteroidal anti‐inflammatories by capillary electrophoresis and sulfonamides by HPLC in human urine

In this paper two applications of three‐phase HF‐LPME for the determination of pharmaceuticals in human urine are proposed: a capillary electrophoresis with a photodiode array detection method for the analysis of seven nonsteroidal anti‐inflammatory drugs (NSAIDs) and a high‐performance liquid chromatographic with photo diode array and fluorescence detection method for the determination of four sulfonamides and their corresponding N⁴‐acetyl‐metabolites. Q3/2 Accurel® polypropylene hollow fibers were used for both procedures. Dihexyl ether was used as the supported liquid membrane for the determination of anti‐inflammatories and 1‐octanol for sulfonamides. An aqueous solution (pH 12) was used in both procedures as the acceptor phase and as the donor phase an aqueous solution (pH 2), and a 2 m Na₂SO₄ aqueous solution (pH 4) was used for the determination of the anti‐inflammatories and sulfonamides. The detection limits obtained were between 0.25 (naproxen) and 0.86 ng/mL (aceclofenac) for the determination of anti‐inflammatories and 7 × 10^?4 (sulfamethoxazole) and 0.048 ng/mL (N⁴‐acetyl‐sulfamethazine) for sulfonamides. The method was successfully applied to the determination of the analytes in human urine. Copyright © 2012 John Wiley & Sons, Ltd.     

π–π stacking motifs in dialkylbis{5‐[(E)‐2‐aryldiazen‐1‐yl]‐2‐hydroxybenzoato}tin(IV) complexes

The diorganotin(IV) complexes of 5‐[(E)‐2‐aryldiazen‐1‐yl]‐2‐hydroxybenzoic acid are of interest because of their structural diversity in the crystalline state and their interesting biological activity. The structures of dimethylbis{2‐hydroxy‐5‐[(E)‐2‐(4‐methylphenyl)diazen‐1‐yl]benzoato}tin(IV), [Sn(CH₃)₂(C₁₄H₁₁N₂O₃)₂], and di‐n‐butylbis{2‐hydroxy‐5‐[(E)‐2‐(4‐methylphenyl)diazen‐1‐yl]benzoato}tin(IV) benzene hemisolvate, [Sn(C₄H₉)₂(C₁₄H₁₁N₂O₃)₂]·0.5C₆H₆, exhibit the usual skew‐trapezoidal bipyramidal coordination geometry observed for related complexes of this class. Each structure has two independent molecules of the Sn^IV complex in the asymmetric unit. In the dimethyltin structure, intermolecular O—H…O hydrogen bonds and a very weak Sn…O interaction link the independent molecules into dimers. The planar carboxylate ligands lend themselves to π–π stacking interactions and the diversity of supramolecular structural motifs formed by these interactions has been examined in detail for these two structures and four closely related analogues. While there are some recurring basic motifs amongst the observed stacking arrangements, such as dimers and step‐like chains, variations through longitudinal slipping and inversion of the direction of the overlay add complexity. The π–π stacking motifs in the two title complexes are combinations of some of those observed in the other structures and are the most complex of the structures examined.     

一种经(E)-α-碘代烯基砜的钯催化交叉偶联反应立体选择合成(1Z,3E)-2-芳砜基取代的1,3-二烯的新方法

（E）-α-Stannylvinyl phenyl（or p-tolyl）sulfones underwent an iododestannylation reaction to afford （E）-α-iodovinyl phenyl（or p-tolyl）sulfones 1, which reacted with （E）-alkenylzirconium（IV） complexes 2 produced in situ by hydrozirconation of terminal alkynes in the presence of a Pd（PPh3）4 catalyst to afford stereoselectively （1Z,3E）-2- phenyl（or p-tolyl）sulfonyl-substituted 1,3-dienes 3 in good yields.     

Influence of basic residues on dissociation kinetics and dynamics of singly protonated peptides: time‐resolved photodissociation study

Product ion yields in postsource decay and time‐resolved photodissociation at 193 and 266 nm were measured for some peptide ions with lysine ([KF₆ + H]⁺, [F₆K + H]⁺, and [F₃KF₃ + H]⁺) formed by matrix‐assisted laser desorption ionization. The critical energy (E₀) and entropy (ΔS^?) were determined by RRKM fitting of the data. The results were similar to those found previously for peptide ions with histidine. To summarize, the presence of a basic residue, histidine or lysine, inside a peptide ion retarded its dissociation by lowering ΔS^?. On the basis of highly negative ΔS^?, presence of intramolecular interaction involving a basic group in the transition structure was proposed. Copyright © 2009 John Wiley & Sons, Ltd.     

Computation of the binding affinities of catechol‐O‐methyltransferase inhibitors: Multisubstate relative free energy calculations

Alchemical free energy simulations are amongst the most accurate techniques for the computation of the free energy changes associated with noncovalent protein–ligand interactions. A procedure is presented to estimate the relative binding free energies of several ligands to the same protein target where multiple, low‐energy configurational substates might coexist, as opposed to one unique structure. The contributions of all individual substates were estimated, explicitly, with the free energy perturbation method, and combined in a rigorous fashion to compute the overall relative binding free energies and dissociation constants. It is shown that, unless the most stable bound forms are known a priori, inaccurate results may be obtained if the contributions of multiple substates are ignored. The method was applied to study the complex formed between human catechol‐O‐methyltransferase and BIA 9‐1067, a newly developed tight‐binding inhibitor that is currently under clinical evaluation for the therapy of Parkinson's disease. Our results reveal an exceptionally high‐binding affinity (K_d in subpicomolar range) and provide insightful clues on the interactions and mechanism of inhibition. The inhibitor is, itself, a slowly reacting substrate of the target enzyme and is released from the complex in the form of O‐methylated product. By comparing the experimental catalytic rate (k_cat) and the estimated dissociation rate (k_off) constants of the enzyme‐inhibitor complex, one can conclude that the observed inhibition potency (K_i) is primarily dependent on the catalytic rate constant of the inhibitor's O‐methylation, rather than the rate constant of dissociation of the complex. © 2012 Wiley Periodicals, Inc.     

A highly selective synthesis of 1‐substituted (E)‐buta‐1,3‐dienes with 4,4,5,5‐tetramethyl‐2‐vinyl‐1,3,2‐dioxaborolane as building block

Highly selective synthesis of 1‐substituted (E)‐buta‐1,3‐dienes via palladium‐catalyzed Suzuki–Miyaura cross‐coupling of (E)‐alkenyl iodides with 4,4,5,5‐tetramethyl‐2‐vinyl‐1,3,2‐dioxaborolane ( 1 ) is reported. The vinylboronate pinacol ester ( 1 ) acts as a vinyl building block to show high chemoselectivity for the Suzuki–Miyaura pathway versus Heck coupling in the presence of biphasic conditions (Pd(PPh₃)₄, aqueous K₂CO₃, toluene and ethanol). Copyright © 2014 John Wiley & Sons, Ltd.     

Novel asymmetric 3,5‐bis(arylidene)piperidin‐4‐one derivatives: synthesis,crystal structures and cytotoxicity

3,5‐Bis(arylidene)piperidin‐4‐one derivatives (BAPs) display good antitumour activity because of their double α,β‐unsaturated ketone structural characteristics. Reported BAPs have generally been symmetric and asymmetric BAPs have been little documented. Three asymmetric BAPs, namely (5E)‐3‐(4‐tert‐butylbenzylidene)‐5‐(4‐fluorobenzylidene)‐1‐methylpiperidin‐4‐one, C₂₄H₂₆FNO, ( 5 ), (5E)‐3‐(4‐tert‐butylbenzylidene)‐5‐(3,5‐dimethoxybenzylidene)‐1‐methylpiperidin‐4‐one, C₂₆H₃₁NO₃, ( 6 ), and (5E)‐3‐{3‐[(E)‐(2,3‐dihydroxybenzylidene)amino]benzylidene}‐5‐(2‐fluorobenzylidene)‐1‐methylpiperidin‐4‐one, C₂₇H₂₃FN₂O₃, ( 12 ), were generated by Claisen–Schmidt condensation. They are characterized by NMR and FT–IR spectroscopies, and elemental analysis. Single‐crystal structure analysis reveals that the two arylidene rings on both sides of the BAP structures adopt an E stereochemistry of the olefinic double bonds and the compounds are E,E isomers. Molecules of ( 5 ) and ( 12 ) generate one‐dimensional chains through intermolecular hydrogen bonds, while compound ( 6 ) generates a two‐dimensional network through hydrogen bonds. Preliminary cytotoxicities toward human liver hepatocellular carcinoma cell line (HepG2), human acute mononuclear granulocyte leukaemia (THP‐1) and human normal hepatical cell line (LO2) were evaluated.     

Graphene oxide coated capillary for the analysis of endocrine‐disrupting chemicals by open‐tubular capillary electrochromatography with amperometric detection

A graphene oxide‐coated capillary was fabricated by using 3‐aminopropyltriethoxysilane as the cross‐linking agent. It was used for the separation and detection of three endocrine‐disrupting chemicals, including bisphenol A, 4‐nonylphenol, and 4‐octylphenol by capillary electrochromatography. Due to the hydrophobicity, hydrogen bonding, and π–π interaction between graphene oxide and the analytes, the three analytes could be well separated in pH = 11.0, 20 mmol/L Na₂B₄O₇‐NaOH/methanol mobile phase (50:50, v/v) within 950 s. After preconcentration, the detection limits were 6.7 × 10^?10, 3.3 × 10^?9, and 6.7 × 10^?10 mol/L (S/N = 3) for bisphenol A, nonylphenol, and octylphenol, respectively. The developed method was successfully applied to the determination of the above analytes in water samples. The satisfactory result demonstrated that the graphene oxide coated capillary used in capillary electrochromatography with amperometric detection was convenient to prepare, highly stable, and had good reproducibility.     

Two‐ and Three‐Component Reactions Leading to New Enamines Derived from 2,3‐Dicyanobut‐2‐enoates

The three‐component reactions of 1‐azabicyclo[1.1.0]butanes 1 , dicyanofumarates (E)‐ 5 , and MeOH or morpholine yielded azetidine enamines 8 and 9 with the cis‐orientation of the ester groups at the C?C bond ((E)‐configuration; Schemes 3 and 4). The structures of 8a and 9d were confirmed by X‐ray crystallography. The formation of the products is explained via the nucleophilic addition of 1 onto (E)‐ 5 , leading to a zwitterion of type 7 (Scheme 2), which is subsequently trapped by MeOH or morpholine ( 10a ), followed by elimination of HCN. Similarly, two‐component reactions between secondary amines 10a – 10c and (E)‐ 5 gave products 12 with an (E)‐enamine structure and (Z)‐oriented ester groups. On the other hand, two‐component reactions involving primary amines 10d – 10f or NH₃ led to the formation of the corresponding (Z)‐enamines, in which the (E)‐orientation of ester groups was established.     

Electrophoretic behavior of DNA‐methyl‐CpG‐binding domain protein complexes revealed by capillary electrophoreses laser‐induced fluorescence

The free solution electrophoretic behavior of DNA‐protein complexes depends on their charge and mass in a certain experimental condition, which are two fundamental properties of DNA‐protein complexes in free solution. Here, we used CE LIF to study the free solution behavior of DNA‐methyl‐CpG‐binding domain protein (MBD2b) complexes through exploring the relationship between the mobilities, charge, and mass of DNA‐protein complexes. This method is based on the effective separation of free DNA and DNA‐protein complexes because of their different electrophoretic mobility in a certain electric field. In order to avoid protein adsorption, a polyacrylamide‐coated capillary was used. Based on the evaluation of the electrophoretic behavior of formed DNA‐MBD2b complexes, we found that the values of (μ₀/μ)‐1 were directly proportional to the charge‐to‐mass ratios of formed complexes, where the μ₀ and μ are the mobility of free DNA probe and DNA‐protein complex, respectively. The models were further validated by the complex mobilities of protein with various lengths of DNA probes. The deviation of experimental and calculated charge‐to‐mass ratios of formed complexes from the theoretical data was less than 10%, suggesting that our models are useful to analyze the DNA‐binding properties of the purified MBD2b protein and help to analyze other DNA‐protein complexes. Additionally, this study enhances the understanding of the influence of the charge‐to‐mass ratios of formed DNA‐protein complexes on their separation and electrophoretic behaviors.     

In‐capillary self‐assembly study of quantum dots and protein using fluorescence coupled capillary electrophoresis

As a vast number of novel materials in particular inorganic nanoparticles have been invented and introduced to all aspects of life, public concerns about how they might affect our ecosystem and human life continue to arise. Such incertitude roots at a fundamental question of how inorganic nanoparticles self‐assemble with biomolecules in solution. Various techniques have been developed to probe the interaction between particles and biomolecules, but very few if any can provide advantages of both rapid and convenient. Herein, we report a systematic investigation on quantum dots (QDs) and protein self‐assembly inside a capillary. QDs and protein were injected to a capillary one after another. They were mixed inside the capillary when a high voltage was applied. Online separation and detection were then achieved. This new method can also be used to study the self‐assembly kinetics of QDs and protein using the Hill equation, the K_D value for the self‐assembly of QDs and protein was calculated to be 8.8 μM. The obtained results were compared with the previous out of‐capillary method and confirmed the effectiveness of the present method.     

Synthesis,crystal structures and anti‐inflammatory activity of fluorine‐substituted 1,4,5,6‐tetrahydrobenzo[h]quinazolin‐2‐amine derivatives

Two fluorine‐substituted 1,4,5,6‐tetrahydrobenzo[h]quinazolin‐2‐amine (BQA) derivatives, namely 2‐amino‐4‐(2‐fluorophenyl)‐9‐methoxy‐1,4,5,6‐tetrahydrobenzo[h]quinazolin‐3‐ium chloride, ( 8 ), and 2‐amino‐4‐(4‐fluorophenyl)‐9‐methoxy‐1,4,5,6‐tetrahydrobenzo[h]quinazolin‐3‐ium chloride, ( 9 ), both C₁₉H₁₉FN₃O⁺·Cl^?, were generated by Michael addition reactions between guanidine hydrochloride and the α,β‐unsaturated ketones (E)‐2‐(2‐fluorobenzylidene)‐7‐methoxy‐3,4‐dihydronaphthalen‐1(2H)‐one, C₁₈H₁₅FO₂, ( 6 ), and (E)‐2‐(4‐fluorobenzylidene)‐7‐methoxy‐3,4‐dihydronaphthalen‐1(2H)‐one, ( 7 ). Because both sides of α,β‐unsaturated ketones ( 6 ) or ( 7 ) can be attacked by guanidine, we obtained a pair of isomers in ( 8 ) and ( 9 ). Single‐crystal X‐ray diffraction indicates that each isomer has a chiral C atom and both ( 8 ) and ( 9 ) crystallize in the achiral space group P2₁/c. The chloride ion, as a hydrogen‐bond acceptor, plays an important role in the formation of multiple hydrogen bonds. Thus, adjacent molecules are connected through intermolecular hydrogen bonds to generate a banded structure. Furthermore, these bands are linked into an interesting 3D network via hydrogen bonds and π–π interactions. Fortunately, the solubilities of ( 8 ) and ( 9 ) were distinctly improved and can exceed 50 mg ml^?1 in water or PBS buffer system (pH 7.4) at room temperature. In addition, the results of an investigation of anti‐inflammatory activity show that ( 8 ) and ( 9 ), with o‐ and p‐fluoro substituents, respectively, display more potential for inhibitory effects on LPS‐induced NO secretion than starting ketones ( 6 ) and ( 7 ).     

Synthesis,spectroscopic characterization,thermal behaviour,in vitro antimicrobial and anticancer activities of novel ruthenium tricarbonyl complexes containing monodentate V‐shaped Schiff bases

The interaction of Ru₃(CO)₁₂ with a novel family of monodentate V‐shaped Schiff base ligands (L^1–4; L¹: (E)‐1‐(4‐((4‐bromobenzylidene)amino)phenyl)ethanone, L²: (E)‐1‐(3‐(4‐(dimethylamino)benzylideneamino)phenyl)ethanone, L³: (E)‐1‐(4‐(4‐(dimethylamino)benzylideneamino)phenyl)ethanone, L⁴: (E)‐1‐(3‐(3,4‐dimethoxybenzylideneamino)phenyl)ethanone) in air under atmospheric pressure afforded the novel complexes [Ru(CO)₃(L^1–4)₂]. The parent ligands and their complexes were characterized using elemental analyses and spectroscopic techniques. In addition, the structure of the representative ligand L¹ was determined using single‐crystal X‐ray analysis. The stereochemistry and theoretical optimization of the three‐dimensional geometry of the ligands and their complexes were justified. In vitro antimicrobial screening against bacterial stains Escherichia coli and Staphylococcus aureus and fungus Candida albicans was conducted. Cytotoxicity of the compounds as anti‐tumour agents was evaluated against liver carcinoma (HepG2), breast carcinoma (MCF7) and colon carcinoma (HCT‐116) cell lines relative to cisplatin and doxorubicin. The complexes showed variable in vitro cytotoxic activities against the three studied cell lines, with IC₅₀ values less than those of cis‐platin, and thus appear to be building blocks for promising anti‐tumour agents.     

Efficient Synthesis of (3E)‐3‐[Amino(aryl)methylidene]chromane‐2,4‐diones (=(3E)‐3‐[Amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) via a Three‐Component Reaction

The Michael‐type addition of a 4‐hydroxycoumarin (=4‐hydroxy‐2H‐1‐benzopyran‐2‐one) 1 to a β‐nitrostyrene (=(2‐nitroethenyl)benzene) 2 in the presence of AcONH₄ leads to substituted (3E)‐3‐[amino(aryl)methylidene]chroman‐2,4‐diones (=(3E)‐3‐[amino(aryl)methylene]‐2H‐1‐benzopyran‐2,4(3H)‐diones) 4 (Table 1). High yields, short reaction time, and easy workup are advantages of this novel one‐pot three‐component reaction.