Zeta potentials of PDMS surfaces modified with poly(ethylene glycol) by physisorption

Controlling zeta potential of PDMS surface coated with a layer of PEG is important for electroosmosis and electrophoresis in PDMS made microfluidic chips. Here, zeta potentials of PDMS surfaces modified by simple physisorption of PEG of different concentrations in phosphate buffer solutions, pure water, and PEG solution were reported. Coating PEG on PDMS surfaces was achieved by immersing a PDMS layer into the PEG solution for 10 min and then taking it out and placing it in an oven at 80℃ for 10 h. To avoid damaging the PEG layer on the PDMS surface, an induction current method was employed for zeta potential measurement. Zeta potentials of PEG modified PDMS in electrolyte solutions were measured. The results show that 2.5% PEG can effectively modify PDMS surface with positive zeta potential value in phosphate buffer solutions, pure water and 10% PEG solution. Further increase in PEG solution beyond 5% for surface modification has no obvious effect on zeta potential change.     

The electrokinetic properties of latex particles: comparison of electrophoresis and dielectrophoresis

A comprehensive study of the AC and DC electrokinetic properties of submicrometre latex particles as a function of particle size and suspending medium conductivity and viscosity is presented. Electrophoretic mobility and dielectrophoretic cross-over results were measured for particle diameters ranging from 44 to 2000 nm. The zeta potentials of the particles were calculated from the electrophoretic mobility data for different suspending medium conductivities, using various models, with and without the inclusion of surface conduction. The dielectrophoretic data was analysed to derive values for the Stern layer conductance and zeta potentials.     

Reversible charging of the ice-water interface. II. Estimation of equilibrium parameters

Equilibrium parameters characterizing the ice-water interface were obtained from electrokinetic and potentiometric data. The dependency of surface potential on pH was measured by the ice electrode. Electrokinetic zeta potentials were measured by electrophoresis. In the interpretation, the 1-pK and 2-pK concepts of the surface complexation model, developed for metal oxides, were used. The equilibrium parameters (constants of surface reactions) were determined. The results were confirmed by numerical simulations. Both 1-pK and 2-pK models fit the experimental data well.     

Zeta potential measurement for air bubbles in protein solutions

Protein adsorption at gas-liquid interfaces is important in a number of processes including foam formation in bioreactors, foam fractionation for protein recovery, and production of protein based food and drinks. The physical properties of the gas-liquid interface will influence foam stability; important properties will include both surface rheological and electrokinetic properties. While surface rheological properties of gas-protein solution interfaces have been reported, there are no published values for electrokinetic properties at such interfaces. In this paper, zeta potential values of gas bubbles in solutions of three proteins, measured using a microelectrophoresis technique, are reported. The three proteins chosen were BSA, beta-casein, and lysozyme; these proteins have all been used previously in protein foaming studies. The effect of protein concentration and ionic strength is considered. For BSA and beta-casein, zeta potential was found to increase with increasing protein concentration and ionic strength. For air bubbles in lysozyme solutions, measured zeta potential was zero. zeta potential values for air bubbles in some binary protein mixtures are also presented.     

Theoretical analysis of electrokinetic flow and heat transfer in a microchannel under asymmetric boundary conditions

The main theme of the present work is to investigate the electrokinetic effects on liquid flow and heat transfer in a flat microchannel of two parallel plates under asymmetric boundary conditions including wall-sliding motion, unequal zeta potentials, and unequal heat fluxes on two walls. Based on the Debye-Huckel approximation, an electrical potential solution to the linearized Poisson-Boltzmann equation is obtained and employed in the analysis. The analytic solutions of the electrical potential, velocity distributions, streaming potential, friction coefficient, temperature distribution, and heat transfer rate are obtained, and thereby the effects of electrokinetic separation distance (K), zeta-potential level (zeta;(1)), ratio of two zeta potentials (r(zeta) identical with zeta;(2)/zeta;(1)), wall-sliding velocity (u(w)), and heat flux ratio (r(q) identical with q"(2)/q"(1)) are investigated. The present results reveal the effects of wall-sliding and zeta-potential ratio on the hydrodynamic nature of microchannel flow, and they are used to provide physical interpretations for the resultant electrokinetic effects and the underlying electro-hydrodynamic interaction mechanisms. In the final part the results of potential and velocity fields are applied in solving the energy equation. The temperature distributions and heat transfer characteristics under the asymmetrical kinematic, electric, and thermal boundary conditions considered presently are dealt with.     

Electrokinetic potentials at the gas-aqueous interface by spinning cylinder electrophoresis

The natural buoyancy of gas bubbles has hampered conventional electrokinetic methods of evaluating charge at the gas-liquid interface. In this study, bubbles are held by centripetal force at the centre of a horizontal, rotating cylinder filled completely with liquid. Migration of the bubble along the axis of the cylinder can be achieved by applying a gravity force or an electrophoretic force. An expression for the drag coefficient has been developed and used to calculate surface charge densities and electrokinetic potentials. In the presence of potassium chloride, anionic and non-ionic surfactants, the electrokinetic potentials were negative (～2–5 mV) at the air-aqueous interface. A cationic surfactant rendered the zeta potential positive. A knowledge of the air-aqueous interfacial rheology is desirable if the drag coefficient, and consequently the zeta potential, at all types of gas-liquid interfaces is to be evaluated.     

A method for simultaneously determining the zeta potentials of the channel surface and the tracer particles using microparticle image velocimetry technique

The zeta potentials of channel surfaces and tracer particles are of importance to the design of electrokinetic microfluidic devices, the characterization of channel materials, and the quantification of the microparticle image velocimetry (microPIV) measurement of EOFs. A method is proposed to simultaneously measure the zeta potentials of the channel surface and the tracer particles in aqueous solutions using the microPIV technique. Through the measurement of the steady velocity distributions of the tracer particles in both open- and closed-end rectangular microchannels under the same water chemistry condition, the electrophoretic velocity of the tracer particles and the EOF field of the microchannel are determined using the expressions derived in this study for the velocity distributions of charged tracer particles in the open- and closed-end rectangular microchannels. Thus, the zeta potentials of the tracer particles and the channel surfaces are simultaneously obtained using the least-square method to fit the microPIV measured velocity distribution of the tracer particles. Measurements were carried out with a microPIV system to determine the zeta potentials of the channel wall and the fluorescent tracer particles in deionized water and sodium chloride and boric acid solutions of various concentrations.     

Determination of zeta potentials of polymeric nanoparticles by the conductivity variation method

An easy method of measurement of the zeta potentials of sub-50-nm polymeric nanoparticles is suggested. Although zeta potential measurements of nanoparticles or emulsions above 50 nm have been successfully carried out, zeta potentials of emulsions or nanoparticles below 50 nm could not be precisely measured in the region of extremely low conductivity by conventional electrophoresis with a He-Ne laser. However, zeta potentials of sub-50-nm nanoparticles were measured in the region of thin electrical double layers by addition of sodium chloride and zeta potentials in the condition without sodium chloride could be predicted by extrapolation of the measured potentials. The electrophoretic mobility of 150-nm nanoparticles stabilized with sodium dodecylsulfate was the same as that calculated from extrapolation of the measured ones. The zeta potentials of sub-50-nm nanoparticles stabilized with sodium dodecylsulfate could be calculated by the same procedure.     

Isoelectric point of fluorite by direct force measurements using atomic force microscopy

Interaction forces between a fluorite (CaF2) surface and colloidal silica were measured by atomic force microscopy (AFM) in 1 x 10(-3) M NaNO3 at different pH values. Forces between the silica colloid and fluorite flat were measured at a range of pH values above the isoelectric point (IEP) of silica so that the forces were mainly controlled by the fluorite surface charge. In this way, the IEP of the fluorite surface was deduced from AFM force curves at pH approximately 9.2. Experimental force versus separation distance curves were in good agreement with theoretical predictions based on long-range electrostatic interactions, allowing the potential of the fluorite surface to be estimated from the experimental force curves. AFM-deduced surface potentials were generally lower than the published zeta potentials obtained from electrokinetic methods for powdered samples. Differences in methodology, orientation of the fluorite, surface carbonation, and equilibration time all could have contributed to this difference.     

Zeta Potential of Highly Charged Thin Double-Layer Systems

Electrophoretic measurements under d.c. conditions involve a fundamental ambiguity for particles with a high zeta potential; two very different values of zeta potential can be ascribed to the same mobility. In the case of a polystyrene sulfate latex studied previously, selecting the higher (absolute) value gave a more consistent picture of the interface and also removed an anomaly in the electrokinetic behavior as a function of indifferent electrolyte concentration. Confirmation that the higher value is the correct one, however, was still needed. The ambiguity is resolved unequivocally here by the use of high-frequency mobility measurements using electroacoustics, since the mobility spectra for the high and low zeta potentials are very different. The interpretation is supported by the dielectric relaxation spectra of this material in the megahertz region. Copyright 2001 Academic Press.     

Short communication: A simple and accurate method of measuring the zeta-potential of microfluidic channels

We describe an improved method for determining the electroosmotic mobility and zeta potential of surfaces based on a current-monitoring method. This technique eliminates the requirement for measurements of channel dimensions and sample conductivities, leading to a simple high precision measurement. The zeta potential of PDMS is measured for native surfaces and surfaces treated with a nonionic surfactant in low-conductivity electrolytes.     

Electrokinetic motion of a micro oil droplet under a glass slide

Electrokinetic motion of a micro oil droplet beneath a glass slide was experimentally investigated in this paper. The micro oil droplets were released under the glass slide in an aqueous solution and the motion along the glass slide was measured by a microscope. The experimental results indicate that while the electrokinetic mobility increases with the applied electric field, it decreases with the oil droplet size and the ionic concentration of the aqueous solution, respectively. By changing the zeta potential of the glass‐liquid interface using polybrene coating from negative to positive, the direction of the electrokinetic mobility is reversed and the absolute value of the electrokinetic mobility increases significantly. Finally, pH effects were also investigated, and it was found that the electrokinetic mobility of the droplets reaches a maximum at pH = 6～8.     

Effects of heavy metals and oxalate on the zeta potential of magnetite

Zeta potential is a function of surface coverage by charged species at a given pH, and it is theoretically determined by the activity of the species in solution. The zeta potentials of particles occurring in soils, such as clay and iron oxide minerals, directly affect the efficiency of the electrokinetic soil remediation. In this study, zeta potential of natural magnetite was studied by conducting electrophoretic mobility measurements in single and binary solution systems. It was shown that adsorption of charged species of Co(2+), Ni(2+), Cu(2+), Zn(2+), Pb(2+), and Cd(2+) and precipitation of their hydroxides at the mineral surface are dominant processes in the charging of the surface in high alkaline suspensions. Taking Pb(2+) as an example, three different mechanisms were proposed for its effect on the surface charge: if pH<5, competitive adsorption with H(3)O(+); if 56, precipitation of heavy metal hydroxides prevails. Oxalate anion changed the associated surface charge by neutralizing surface positive charges by complexing with iron at the surface, and ultimately reversed the surface to a negative zeta potential. Therefore the adsorption ability of heavy metal ions ultimately changed in the presence of oxalate ion. The changes in the zeta potentials of the magnetite suspensions with solution pH before and after adsorption were utilized to estimate the adsorption ability of heavy metal ions. The mechanisms for heavy metals and oxalate adsorption on magnetite were discussed in the view of the experimental results and published data.     

Tangential flow streaming potential measurements: Hydrodynamic cell characterization and zeta potentials of carboxylated polysulfone membranes

Computational fluid dynamics calculations were carried out to ensure that a self-made tangential flow mode streaming potential measurement cell meets the hydrodynamic stipulations of laminar, steady and established electrolyte flow necessary for reproducible electrokinetic measurements. The calculations show that the cell design meets all of these conditions.Six carboxylated polysulfones with a range of different degrees of substitution (DS) from 0.26 to 1.74 carboxyl groups per polymer repeat unit were synthesized in a two-stage process of lithiation and carboxylation. Ultrafiltration membranes were made from both the unmodified polysulfone and these hydrophilic materials. The zeta potentials of these membrane surfaces were determined in 0.001 M KCl solution as a function of pH. The curves show the theoretically expected profiles for non-ionic and weakly acidic materials. The growing influence of the COOH dissociation on the surface charge formation is indicated by the flattening of the curves at low pH values. The magnitude of the negative zeta potentials plateau values ranged from −52 to −20 mV. While unmodified PSU has a plateau value of −52 mV this value decreases continuously with increasing DS to −20 mV for the PSU-COOH 1.74 material. It is suggested that this arises from a shift of the electrokinetic shear plane into the bulk electrolyte solution due to an extended swelling layer reflecting the enhanced hydrophilicity of these membrane surfaces.     

A novel method for measuring zeta potentials of solid–liquid interfaces

A novel method for measuring the zeta potential of PDMS–electrolyte solution interface is presented in this paper. When an electrolyte solution passes the electrode coated with PDMS film, an electrical current will be induced due to the electrostatic potential difference between the PDMS–air interface and the PDMS–electrolyte solution interface. Based on this principle, the relationship between the measured electrical signal and the zeta potential of PDMS–electrolyte solution interface is experimentally investigated. The results show that the magnitude of the measured signal is linearly proportional to this potential difference. An empirical correlation between the zeta potential and the measured voltage signal was obtained. Good agreement was found when comparing the zeta potential calculated by this empirical equation with that reported in the published journal papers. The zeta potential measurement method presented in this paper is simple and accurate and can be used for measuring zeta potentials of other dielectric–electrolyte interfaces.     

Evaluating the surface charge of C18 stationary phases

The surface charge of four C18 stationary phases was investigated by measuring the flow induced streaming potential, a well known electrokinetic property of charged surfaces. Three of the stationary phases (Symmetry, Gemini, and Xterra-MS) had significantly positive streaming potentials at both pH 3 and 4.5. The fourth (Zorbax-SB) appeared to be essentially neutral at pH 3 and became negative at pH 4.5. Apparent zeta potentials ranged from approximately +16 to -4 mV. The retention behavior was also investigated using chloride as model anion and glycinamide (in its protonated form) as model cation. When the retention factor (k) of glycinamide was subtracted from k of chloride anion, the resulting delta k values showed very similar trends as apparent zeta potential values, suggesting that the simple chromatographic method could be used to estimate zeta potential values, or that the zeta potential values could be useful for ranking columns according to ion exchange or exclusion behavior. The anion exchange capacity of the Symmetry and Gemini columns was also estimated, using a published chromatographic procedure, and the results suggest about 2 microEq. capacity per gram of packing.     

Measurement of the zeta potential of planar solid surfaces by means of a rotating disk

A method for measuring the zeta potential of disks is described. Combining the hydrodynamic properties of a rotating disk, the solution of Laplace's equation for the potential, and the electrokinetic boundary condition, one obtains an equation that relates the zeta potential of the disk to the streaming potential in the disk's vicinity. Theory predicts a dependence of the streaming potential on the rotation rate raised to the 3/2 power. Theory also shows that placement of one reference electrode on the axis of rotation near the disk surface and the other far from the disk is favorable. Measurement of the streaming potential of silicon oxide and indium tin oxide in contact with a solution of potassium chloride demonstrated the expected 3/2 power dependence on rotation rate. The zeta potentials calculated from the combination of the theory and experimental data agreed with published values.     

High ionic strength electrokinetics of melamine-formaldehyde latex

The electrokinetic potential of melamine-formaldehyde latex at high ionic strengths was measured by means of two different instruments. The present study confirms that the zeta potentials in 1 M 1-1 electrolyte solutions can be as high as +/-20 mV. The IEP of latex at low ionic strengths was at pH 11. The increase in the electrolyte concentration induced a shift in the IEP to low pH for all studied salts, and this indicates specific adsorption of the anions. The magnitude of the shift depends chiefly on the nature of the anion and increases in the series Cl < NO(3) = Br < I, and the nature of the cation (Li, Na, K, Cs) plays a rather insignificant role.