Optimization of an Electrochemical Sensor for Determination of Imidacloprid Based on β‐cyclodextrin Electropolymerization on Glassy Carbon Electrode

An electrochemical sensor based on electropolymerization of β‐cyclodextrin (β‐CD) on a glassy carbon electrode (GCE) was developed for the determination of imidacloprid (IMP). That insecticide is the most commonly used insecticides globally and has been related to the death of bee colonies around the world are imperative. So the development of a simple, cheap and sensitive method for IMP determination is essential. This work aims the modification of a GCE by β‐CD film. The analytical response obtained with GCCE/β‐CD in the presence of the IMP showed an increase in the peak current variation of 947 % in relation to the bare GCE, indicating that the analyte was encapsulated in the β‐CD increasing the detection sensitivity. The followed experimental conditions were optimized: potential range (−1.3 to 0.9 V), presence or absence of dissolved oxygen (presence) and stirring during the electropolymerization (with agitation), number of cycles (5 scans), electrolyte pH (pH=5.0), scan rate (100 mV s⁻¹) and concentration of β‐CD (6 mol L⁻¹). The optimization promoted a peak current variation increase of 57 %, developing a more sensitivity methodology.     

A New Dual‐Signalling Electrochemical Sensing Strategy Based on Competitive Host–Guest Interaction of a β‐Cyclodextrin/Poly(N‐acetylaniline)/Graphene‐Modified Electrode: Sensitive Electrochemical Determination of Organic Pollutants

Based on the competitive host–guest interaction between a β‐cyclodextrin/poly(N‐acetylaniline)/electrogenerated‐graphene (β‐CD/PNAANI/EG) film and probe or target molecules, a new dual‐signalling electrochemical sensing method has been developed for the sensitive and selective determination of organic pollutants. As a model system, rhodamine B (RhB) and 1‐aminopyrene (1‐AP) were adopted as the probe and target molecules, respectively. Due to the host–guest interaction, RhB molecules can enter into the hydrophobic inner cavity of β‐CD, and the β‐CD/PNAANI/EG‐modified glassy carbon electrode displays a remarkable oxidation peak due to RhB. In the presence of 1‐AP, competitive association to β‐CD occurs and the RhB molecules are displaced by 1‐AP. This results in a decreased oxidation peak current of RhB and the appearance of an oxidation peak current for 1‐AP, and the changes of these signals correlate linearly with the concentration of 1‐AP. When the value ΔI_1‐AP+∣ΔI_RhB∣ (ΔI_1‐AP and ΔI_RhB are the change values of the oxidation peak currents of 1‐AP and RhB, respectively) is used as the response signal to quantitatively determine the concentration of 1‐AP, the detection limit is much lower than that given by using ΔI_1‐AP or ΔI_RhB as the response signal. This dual‐signalling sensor can provide more sensitive target recognition and will have important applications in the sensitive and selective electrochemical determination of electroactive organic pollutants.     

Electrochemical Derivatization of Acetaminophen for Indirect Determination of Eflornithine Using β‐CD Modified Glassy Carbon Electrode

In the present work, the oxidation of acetaminophen in the absence and presence of eflornithine was electrochemically investigated by means of cyclic voltammetry at a glassy carbon electrode (GCE). Our results indicate that N‐acetyl‐p‐benzoquinone imine (NAPQI) produced from two‐electron electrochemical oxidation of acetaminophen participates in a Michael addition reaction with eflornithine via an ECE mechanism. This fact was used for the determination of eflornithine using differential pulse voltammetry (DPV) technique on the surface of β‐Cyclodextrin modified glassy carbon (β‐CD/GC) electrode. β‐CD/GC electrode was prepared through an electrodeposition procedure and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), Cyclic Voltammetry (CV), Field Emission Scanning Electron Microscopy (FESEM) and Energy‐dispersive X‐ray spectroscopy (EDS) techniques. Under optimum conditions, the β‐CD/GC electrode showed a good linearity as a function of the eflornithine concentration over the range from 5 to 100 μM with detection limit and quantification limit of 1.94 and 5.8 μM, respectively. Finally, the proposed protocol was confirmed to be successful in determination of eflornithine in human urine samples with good recovery, ranging from 97.2 % to 104.8 %.     

Electrochemical Quantitative Analysis of Nucleic Acids Using β‐Cyclodextrin Modified Gold Electrode

We present an electrochemical biosensor for the analysis of nucleic acids upon hybridization on the β‐cyclodextrin (β‐CD)‐modified gold electrode. The strategy is based on the following: The 5’‐ferrocene‐labeled single stranded capture probe DNA (5’‐fc‐ss‐DNA) was incorporated into the cavity of thiolated β‐CD which was immobilized on the surface of gold electrode. After hybridization of complementary target DNA, hybridized double stranded DNA (ds‐DNA) was released from the cavity of β‐CD. The difference of electrochemical properties on the modified gold electrode was characterized by cyclic voltametry and surface plasmon resonance. We successfully applied this method to the investigation of the sensor responses due to hybridization on various concentrations of applied target DNA. As a result, the label‐free electrochemical DNA sensor can detect the target DNA with a detection limit of 1.08 nM. Finally, our method does not require either hybridization indicators or other signalling molecules such as DNA intercalaters which most of electrochemical hybridization detection systems require.     

Studies on the Mass Spectra of N‐Aryl α,β‐Unsaturated γ‐Lactams

The mass spectra of a series of N‐aryl α,β‐unsaturated γ‐lactams were studied. Besides the molecular ion, the three characteristic fragments such as [M⁺‐29], [M⁺‐55], and [M⁺‐82] were commonly found in a series of N‐Aryl α,β‐unsaturated γ‐lactams in EI/MS. Further more the mechanism for the interpretation of these fragments is also de scribed.     

A New Route to N‐Aryl 2‐Alkenamides,N‐Allyl N‐Aryl 2‐Alkenamides,and N‐Aryl α,β‐Unsaturated γ‐Lactams from N‐Aryl 3‐(Phenylsulfonyl)propanamides

A series of N‐aryl 2‐alkenamides were produced efficiently by treating N‐aryl 3‐(phenylsulfonyl)‐propanamides with potassium tert‐butoxide in THF at 0°C. With out isolation, it was further treated with an additional equivalent of potassium tert‐butoxide and allyl bromide to give N‐allyl N‐aryl 2‐alkenamides in one pot in good yields. Followed by a ring‐closing metathesis reaction, these N‐allyl N‐aryl 2‐alkenamides were respectively converted into corresponding N‐aryl α,β‐unsaturated γ‐lactams in moderate yields.     

Electrochemical Immunosensor for α‐Fetoprotein Based on Gold Nanoparticles/Graphene‐Prussian Blue

The electrochemical immunosensor for α‐fetoprotein (AFP) was fabricated based on the platform of gold nanoparticles (GNP)/graphene (Gr)‐prussian blue (PB). By electrodeposition, GNP were modified on the surface of the prepared Gr‐PB. The anti‐AFP‐1,1′‐ferrocenedicarboxylic acid (FcDA) as label was directly immobilized on the platform of GNP/Gr‐PB. And after the immunoreactions, the formed complex inhibited the electron transfer and decreased the catalytic current of FcDA toward the reduction of H₂O₂. And in the range of 10–3200 pg·mL^?1, the decreased current is linear with the concentration of AFP, with a detection limit of 3 pg·mL^?1. The developed immunoassay method showed good precision, high sensitivity, acceptable stability and reproducibility, and could be used for the detection of real samples with consistent results in comparison with those obtained by the enzyme linked immunosorbent assay (ELISA) method.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

Electrochemical Determination of the Herbicide Bentazone Using a Carbon Nanotube β‐Cyclodextrin Modified Electrode

An electrochemical sensor has been developed for the determination of the herbicide bentazone, based on a GC electrode modified by a combination of multiwalled carbon nanotubes (MWCNT) with β‐cyclodextrin (β‐CD) incorporated in a polyaniline film. The results indicate that the β‐CD/MWCNT modified GC electrode exhibits efficient electrocatalytic oxidation of bentazone with high sensitivity and stability. A cyclic voltammetric method to determine bentazone in phosphate buffer solution at pH 6.0, was developed, without any previous extraction, clean‐up, or derivatization steps, in the range of 10–80 µmol L^?1, with a detection limit of 1.6 µmol L^?1 in water. The results were compared with those obtained by an established HPLC technique. No statistically significant differences being found between both methods.     

Catalytic Au Electrodes Based on SAMs of per(6‐deoxy‐6‐thio‐2,3‐di‐O‐methyl)‐β‐cyclodextrin

A three‐step sequential self‐assembly procedure was applied in preparing gold electrodes modified in a stable and controlled way by a monolayer of thiolated β‐cyclodextrin (β‐CD), with methylene blue (MB) included in its cavity as the active component of the monolayer, and octanethiol as the nonelectroactive spacer blocking the electrode surface not occupied by β‐CD. MB acted as a mediator of electrons with respect to a solution soluble analyte, H₂O₂, and provided electrical contact between the electrode and solution resident enzyme, laccase, catalyzing reduction of oxygen to water.     

Synthesis of β‐Haloketones by β‐Addition Reactions of α,β‐Unsaturated Ketones with BX3 (X = Br,Cl) as Halide Source

A series of β‐bromoketones and β‐chloroketones were synthesized by the addition reactions of α,β‐unsaturated ketones under BX₃ (X = Br, Cl) and ethylene glycol reaction system. The α,β‐unsaturated ester also was successfully converted to its corresponding β‐bromoester under the reaction condition.     

Palladium‐catalyzed carbonylative cyclization of β‐bromo‐α,β‐unsaturated carboxylic acids with primary amines leading to N‐alkylmaleimides

Cyclic β‐bromo‐α,β‐unsaturated carboxylic acids are carbonylatively cyclized with primary amines under carbon monoxide pressure in MeCN in the presence of a catalytic amount of PdCl₂(PPh₃)₂ to give N‐alkylmaleimides. Copyright © 2012 John Wiley & Sons, Ltd.     

Peptide N‐Amination Supports β‐Sheet Conformations

The conformational heterogeneity of backbone N‐substituted peptides limits their ability to adopt stable secondary structures. Herein, we describe a practical synthesis of backbone aminated peptides that readily adopt β‐sheet folds. Data derived from model N‐amino peptides suggest that extended conformations are stabilized through cooperative steric, electrostatic, and hydrogen‐bonding interactions.     

TBAF‐Mediated Dimerization Reaction of β,γ‐Unsaturated Arylketones

A simple and high‐yield method for the synthesis of several 1,5‐diaryl‐1,5‐dicarbonyl compounds has been established starting from TBAF‐mediated isomerization and dimerization reaction of β,γ‐unsaturated arylketones (allyl arylketones) with mono‐, di‐, and tri‐methoxy groups, which is derived from allylation of commercially available different benzaldehydes and followed by oxidation of the resulting secondary alcohols.     

Determination of Esomeprazole on an Electropolymerized L‐arginine and β‐cyclodextrin Modified Screen Printed Carbon Electrode

The formation of an inclusion complex of the proton‐pump inhibitor (PPI) drug esomeprazole (ESO) with ß‐cyclodextrin (ß‐CD) has been investigated and proven by cyclic voltammetry (CV). The formation constant of the complex was determined. Thereafter, an electropolymerized β‐CD and L‐arginine (L‐arg) modified screen printed carbon electrode (P‐β‐CD‐L‐arg/SPCE) was developed for the determination of ESO using differential pulse adsorptive stripping voltammetry (DPAdSV). A significant enhancement of the peak current was observed when applying an accumulation step due to the effect of adsorption. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) further indicated that the polymer of β‐CD and L‐arg efficiently improved the electron transfer kinetic between analyte and electrode surface. Under the optimized conditions, the oxidation peak current was linearly proportional to the concentration of the drug in the range of 1.0×10^?8 to 1.0×10^?5 M. The DPAdSV method was successfully used to determine the concentrations of the drug in spiked human serum samples.     

Electrochemical Detection of Interaction Between α‐Synuclein and Clioquinol

α‐Synuclein (α‐S) protein is expressed in presynaptic terminals in the central nervous system. The aggregation of α‐S is implicated in the pathogenesis of Parkinson’s disease (PD). In this report, the interaction of α‐S with clioquinol (CQ) was investigated in the presence of Cu(II) ions using electrochemistry, as well as Thioflavin T‐based fluorescence and Congo Red‐based UV‐Vis studies. In the presence of CQ, the α‐S aggregation rate was observed to decrease. The preliminary results showed promise in the future development of CQ derivatives as novel small molecule therapeutic agents with potential efficacy targeting α‐S in PD therapy.     

Comparison of Methionine α,γ‐Lyase and Homocysteine α,γ‐Lyase for Electrochemical Determination of Homocysteine

Recently, a novel enzymatic method was developed for determination of homocysteine. This method utilizes the electrochemical hydrogen sulfide sensor along with methionine α,γ‐lyase to accomplish the fast, accurate, sensitive and selective measurements. As a continuation of this work, another enzyme, homocysteine α,γ‐lyase, was used and the parallel experiments of using both enzymes were carried out against the effect of pH, sensitivity, linearity, and interferences, in an intended comparison between these two enzymes. The excellent linearity of amperometric currents against homocysteine concentrations, high sensitivities and low detection limits for both enzymes reconfirmed that the electrochemical method is superior over other analytical means. The high enzymatic activity of methionine α,γ‐lyase surpassing homocysteine α,γ‐lyase endowed the former higher sensitivity, lower detection limit and faster response than the latter, suggesting methionine α,γ‐lyase a better candidate for homocysteine measurement by electrochemical method. The differences between these two enzymes on the trends of response time and sensitivity at different pH environments, reactivity toward several forms of homocysteine as well as on the interference from several agents were also addressed and discussed.     

Enantioselective Syntheses of Substituted γ‐Butyrolactones

The previously described chiral 2‐acyloxathianes 5 (Scheme I) are used in two different enantioselective syntheses of γ‐butyrolactones. In one synthesis, Grignard addition, cleavage and reduction to carbinols RR'C(OH)CH₂OH is followed by tosylation, malonate homologation, lactonization, and removal of the carbomethoxy group to give optically active γ‐lactones. A modification of this synthesis (Scheme I) leads to optically active α‐methylene‐γ‐lactones. In the second synthesis, reaction of a bromomagnesium enolate with ketones 5 leads to β‐hydroxyesters, which, by appropriate sequences of reduction and cleavage (Scheme II) are converted to optically active α‐ or β‐hydroxy‐γ‐lactones.     

Differentiation of α‐COOH from β‐COOH in aspartic acids by N‐phosphorylation

The biomimic reactions of N‐phosphoryl amino acids, which involved intramolecular penta‐coordinate phosphoric‐carboxylic mixed anhydrides, are very important in the study of many biochemical processes. The reactivity difference between the α‐COOH group and β‐COOH in phosphoryl amino acids was studied by experiments and theoretical calculations. It was found that the α‐COOH group, and not β‐COOH, was involved in the ester exchange on phosphorus in experiment. From MNDO calculations, the energy of the penta‐coordinate phosphoric intermediate containing five‐member ring from α‐COOH was 35 kJ/mol lower than that of the six‐member one from β‐COOH. This result was in agreement with that predicted by HF/6‐31G** and B3LYP/6‐31G** calculations. Theoretical three‐dimensional potential energy surface for the intermediates predicted that the transition states 4 and 5 involving α‐COOH or β‐COOH group had energy barriers of ΔE=175.8 kJ?mol^?1 and 210.4 kJ?mol^?1, respectively. So the α‐COOH could be differentiated from β‐COOH intramolecularly in aspartic acids by N‐phosphorylation. © 2001 John Wiley & Sons, Inc. Int J Quant Chem 83: 41–51, 2001     

Helical‐Ribbon Formation by a β‐Amino Acid Modified Amyloid β‐Peptide Fragment

An addition to the family : The introduction of β‐amino acid residues into a modified amyloid β peptide fragment resulted in well‐defined helical nanoribbons (see cryo‐TEM image) comprising β strands mainly oriented perpendicular to the ribbon axis. The nanoribbons order into a flow‐aligning nematic phase at higher concentration. The β‐strand nanoribbon structure is an addition to the known set of secondary structures adopted by β‐peptides.