Characterization and Application of Surface Plasmon-Enhanced Optical Diffraction from Electrodeposited Gold Nanowire Arrays

Arrays of gold nanowires formed by the process of lithographically patterned nanowire electrodeposition (LPNE) were characterized by a combination of SEM, polarized UV-visible absorption spectroscopy and optical diffraction measurements. A transverse localized surface plasmon resonance (LSPR) was observed for gold nanowire arrays with an absorption maximum (λ(max)) that varied with nanowire width. Transmission optical diffraction measurements were measured with the even and odd diffraction orders creating an alternating, out of phase sinusoidal intensity pattern characteristic of the LPNE nanowire arrays. The intensities of the even diffraction order maxima were the strongest for nanowires with a width of 115 ± 10 nm; nanowires of this width exhibit a λ(max) of 635 ± 10 nm, verifying that the transverse LSPR has enhanced the optical diffraction signal. Real time total internal reflection diffraction intensity measurements were used to monitor in situ the electrodeposition of silver monolayers onto the gold nanowire arrays.     

泡沫镍载Co（OH）2纳米线的电化学电容性能

以无模板法制备了泡沫镍载Co(OH)2纳米线电极,利用扫描电镜(SEM)和透射电镜(TEM)观测了纳米线的表面形貌,利用X射线衍射(XRD)分析了Co(OH)2纳米线的结构,通过循环伏安、恒流充放电和交流阻抗测试了电极的电化学电容性能.结果表明:Co(OH)2呈线状生长,其直径约为300nm,长度约为8～10μm,密集地生长在泡沫镍骨架上.电流密度为10mA·cm-2时电极的放电比容量高达677F·g-1,循环500次后比容量仍保持在574F·g-1,电化学阻抗测试其电荷传递电阻仅为0.23Ω,500次循环后电荷传递电阻仅增加0.03Ω.     

Hybrid Silver Nanowire/Titanium Oxides Nanocomposites as Anode for Dye‐Sensitized Solar Cell Application

In this study, we investigated the effect of adding metallic nanowires in the anode of dye‐sensitized solar cell (DSSC) to improve the photovoltaic efficiency. Photo‐excited electrons can be efficiently transferred to the electrode through the network of the dispersed metallic nanowires added in the anode. We compared the photovoltaic performance with the anodes of standard P‐25, the silver nanowire/P‐25, and the TiO₂ coated silver nanowire/P‐25 DSSC. The DSSC with TiO₂ coated silver nanowires shows significantly improved (about 1.5 and 2.0 times) photovoltaic efficiency and structural durability compared with that of the standard P‐25 and the silver nanowires without coating DSSC. The TiO₂ coated silver nanowire can resist the redox chemical corrosions by iodide ions since they are protected from contact with electrolytes during the photovoltaic reaction by the coated thin TiO₂ layer. The presence of the metal network (silver nanowires) improves the production and transportation of light generated current so as to the photovoltaic efficiency.     

Collision of a long DNA molecule with an isolated nanowire

We provide an experimental test of the universal behavior arising in simulations of the electrophoretic collision of a long DNA molecule with an isolated, thin post. Our experiments take advantage of a robust protocol to embed matrices of circa 100 nm radius ZnO nanowires in a microfluidic channel. The density and height of the nanowires are easily controlled by the seeding and growth conditions. Single-molecule videomicroscopy of λ-DNA electrophoresis in a sparse nanowire array shows that the average holdup time decays exponentially with the impact parameter, in agreement with simulations. Only at the largest electric field studied here does the hooking probability approach that for an infinitesimally thin post.     

Dielectrophoretic alignment of metal and metal oxide nanowires and nanotubes: a universal set of parameters for bridging prepatterned microelectrodes

Nanowires and nanotubes were synthesized from metals and metal oxides using templated cathodic electrodeposition. With templated electrodeposition, small structures are electrodeposited using a template that is the inverse of the final desired shape. Dielectrophoresis was used for the alignment of the as-formed nanowires and nanotubes between prepatterned electrodes. For reproducible nanowire alignment, a universal set of dielectrophoresis parameters to align any arbitrary nanowire material was determined. The parameters include peak-to-peak potential and frequency, thickness of the silicon oxide layer, grounding of the silicon substrate, and nature of the solvent medium used. It involves applying a field with a frequency >10(5) Hz, an insulating silicon oxide layer with a thickness of 2.5 μm or more, grounding of the underlying silicon substrate, and the use of a solvent medium with a low dielectric constant. In our experiments, we obtained good results by using a peak-to-peak potential of 2.1 V at a frequency of 1.2 × 10(5) Hz. Furthermore, an indirect alignment technique is proposed that prevents short circuiting of nanowires after contacting both electrodes. After alignment, a considerably lower resistivity was found for ZnO nanowires made by templated electrodeposition (2.2-3.4 × 10(-3) Ωm) compared to ZnO nanorods synthesized by electrodeposition (10 Ωm) or molecular beam epitaxy (MBE) (500 Ωm).     

Preferential Partition of Nanowires in Thin Films of Immiscible Polymer Blends

Summary: The preferential partition of silver nanowires in thin films of polystyrene/poly(vinyl pyrrolidone) (PS/PVP, with a 30/70 weight ratio) blends, that induces drastic blend morphology variation, is reported. The silver nanowires are fabricated with the anodic aluminum oxide templating method, and have a diameter of 300 nm and length of 10 µm. At a higher nanowire loading of 10 wt.‐%, the silver nanowires are entangled and selectively concentrate within the continuous PVP domain. If surface modified by thiols carrying hydrophobic tails, the silver nanowires become hydrophobic and prefer to stay within the discrete hydrophobic PS domains. At a lower nanowire loading of 5 wt.‐%, the nanowires are non‐entangled and concentrate at regions near the interfaces of the PS and PVP phases, which induces the formation of interconnected PS domains.

Preferential partition of silver nanowires in thin films of PS/PVP (30/70) blends at a casting temperature of −10 °C.     

Manipulating Nanowire Assembly for Flexible Transparent Electrodes

Manipulating nanowire assembly could help the design of hierarchical structures with unique functionalities. Herein, we first report a facile solution‐based process under ambient conditions for co‐assembling two kinds of nanowires which have suitable composition and functionalities, such as Ag and Te nanowires, for the fabrication of flexible transparent electrodes. Then Te nanowires can be etched away easily, leaving Ag nanowire networks with controllable pitch. By manipulating the assembly of Ag and Te nanowires, we can precisely tailor and balance the optical transmittance and the conductivity of the resulting flexible transparent electrodes. The network of Ag nanowires which have tunable pitch forms a flexible transparent conducting electrode with an averaged transmission of up to 97.3 % and sheet resistances as low as 2.7 Ω/sq under optimized conditions. The work provides a new way for tailoring the properties of nanowire‐based devices.     

A Simple Hydrothermal Route to Large‐Scale Synthesis of Uniform Silver Nanowires

This paper describes the preparation of uniform silver nanowires by reducing freshly prepared silver chloride with glucose at 180 °C for 18 hours in the absence of any surfactants or polymers. Scanning electron microscopy studies indicated that the silver nanowires are about 100 nm in diameter and up to 500 μm in length. High‐resolution transmission electron microscopy analyses showed that the silver nanowires grow perpendicularly to the Ag(200) plane. The silver nanowires are believed to grow through a solid–solution–solid process. Some influential factors on the growth of silver nanowires are also discussed.     

Metallization of dna on the surface

A method to develop DNA fibrils with a length more than a few tens of micrometers, oriented in one direction on the n- and p-type silicon surface is described. A new simple and effective technique is proposed to produce silver nanowires by electrochemical reduction of silver ions bound to DNA using the obtained fibrils as a template, as a result of which DNA molecules fixed on the surface of the n-type silicon single crystal are uniformly covered by silver clusters with a size of about 30 nm. The proposed metallization procedure of DNA on the n-type silicon surface has an advantage in comparison with a similar one for macromolecules fixed on freshly cleaved mica, glass surface, and p-type silicon. n-Type silicon is not only a substrate, but also a source of electrons for silver reduction. The absence of an additional chemical component (reducer) principally distinguishes the proposed method from the others currently known. Atomic force microscopic images of fixed DNA molecules and prepared nanowires are obtained.     

Synthesis of tubular gold and silver nanoshells using silica nanowire core templates

We report the synthesis of tubular gold and silver nanoshells on silica nanowire core templates in solution. Silica nanowires were synthesized and characterized with optical and NMR methods. Gold nanoparticle seeds (2 to 3 nm) with weak repulsive surfactants such as tetrakis-hydroxymethyl-phosphonium chloride (THPC) were conjugated to the surface of these nanowires. A regrowth process was initiated from these nanoparticles on the surface of the silica nanowires dispersed in gold or silver stock solutions in the presence of reducing agents. Micrometers-long gold and silver tubular nanoshells (80-150 nm o.d.) were made, fully covering the silica nanowires.     

具有一维梯度直径的金属银纳米线的制备与结构表征

Since the conceptoffunctionally graded m aterials(FG M)is proposed[1,2],m uch attention has been paid toFG M studies.Generally,FG M s were designed with thegradientdistribution ofcom position and structure,andthe graded structure of FG M is achieved by acom position gradient from one side of m aterials to theother,resulting in gradientproperties.Itis well鄄knownthat properties of nanom eter鄄sized m aterials stronglydepend on their sizes.Such size effect offers a newconcept for the design…     

Programmed Self‐Assembly of a Quadruplex DNA Nanowire

The ability to produce, reproducibly and systematically, well‐defined quadruplex DNA nanowires through controlled rational design is poorly understood despite potential utility in structural nanotechnology. The programmed hierarchical self‐assembly of a long four‐stranded DNA nanowire through cohesive self‐assembly of GpC and CpG “sticky” ends is reported. The encoding of bases within the quadruplex stem allows for an uninterrupted π‐stacking system with rectilinear propagation for hundreds of nanometers in length. The wire is mechanically stable and features superior nuclease resistance to double‐stranded DNA. The study indicates the feasibility for programmed assembly of uninterrupted quadruplex DNA nanowires. This is fundamental to the systematic investigation of well‐defined DNA nanostructures for uses in optoelectronic and electronic devices as well as other structural nanotechnology applications.     

电化学法制备Ni-W-P纳米线阵列电极及其催化析氢性能

采用二次氧化法制备了多孔阳极氧化铝(AAO)模板, 通过控制电位沉积技术在AAO模板内组装了Ni-W-P合金纳米线阵列. 在扫描电子显微镜(SEM)下观察到Ni-W-P纳米线表面光滑, 长约20 μm, 直径均匀(约为100 nm), 与AAO模板孔径基本一致. 阴极极化曲线和交流阻抗图谱(EIS)的测试结果表明, Ni-W-P合金纳米线阵列电极析氢反应(HER)电阻减小, 具有更高的催化析氢活性, 电流密度为10 mA·cm^-2时, 析氢极化电位较Ni-W-P合金电极正移约250 mV.     

Molecular Template Assisted Growth of Ultrathin Silicon Carbide Nanowires with Strong Green Light Emission and Excellent Field‐Emission Properties

A novel molecule template assisted chemical co‐reduction method has been successfully developed for the controlled synthesis of ultrathin β‐SiC single‐crystalline nanowires on a large scale. The ultrathin β‐SiC single‐crystalline nanowires are about 8 nm in diameter and 200–800 nm in length. The resulting thin β‐SiC single‐crystalline nanowire is new in the family of β‐SiC one‐dimensional (1D) nanostructures. A synergistic action of π‐stacking and steric hindrance result from the 1,10‐phenanthroline molecule template are proposed to explain the growth mechanism of the ultrathin β‐SiC single‐crystalline nanowires based on the experimental observation. Importantly, such ultrathin β‐SiC nanowire has shown a strong structure‐induced enhancement of photoluminescence properties and has exhibited a very strong green light emission, which can be seen by naked eye. Furthermore, the unique β‐SiC ultrathin nanowire structure exhibits a low turn‐on field (3.57 V μm^?1) and a large field‐emission current density (20 mA cm^?2). These results suggest that the ultrathin β‐SiC nanowires can be expected to find promising applications as field emitters and photoelectronic devices.     

Preparation of Nanogapped Gold Nanoparticle Array for DNA Detection

A novel DNA detection technique using a gold nanoparticle array film electrode has been reported here. The gold nanoparticles molecularly linked with binder molecule (1,10‐decanedithiol) were separated 1.3 nm from each other, and the DNA conductivity change from single to double strand was measured by monitoring a voltage drop across the particles, between which a probe of a 12‐mer oligonucleotide was immobilized. In adding a complementary oligonucleotide on the nanoparticle film chip, an immediate decrease in the film resistance (ca. 1.4 Ω) due to a hybridization event occurred in a reproducible manner with this simple setup. In the paper, we have an interest in the primary sensing properties; effect of the film resistance on the sensor response, dependence of the resistance change on the DNA concentration, and the performance of the system for DNA detection including single nucleotide polymorphisms were described.     

Formation of nanowire striations driven by Marangoni instability in spin-cast polymer thin films

Parallel striations made of silver nanowires were formed through the Marangoni instability induced during spin casting of poly(2-vinyl pyridine)/silver nanowire/chloroform solutions. The striation patterns of the silver nanowires resembled those obtained from spin casting of the corresponding neat polymer solutions, indicating essentially the same driving mechanism (i.e., the Marangoni instability). The silver nanowires were found to concentrate in the valleys of the striation pattern to balance the nonuniform surface tension distribution in the polymer thin film. The resulting nanowire striation patterns were found to depend on polymer concentration, rotational speed, and nanowire loading. Interestingly, this nanowire striation phenomenon was found to be independent of the substrate characteristics, hydrophobic or hydrophilic.     

Exciton-plasmon interaction in a composite metal-insulator-semiconductor nanowire system

We report about the synthesis and optical properties of a composite metal-insulator-semiconductor nanowire system which consists of a wet-chemically grown silver wire core surrounded by a SiO2 shell of controlled thickness, followed by an outer shell of highly luminescent CdSe nanocrystals. With microphotoluminescence (micro-PL) experiments, we studied the exciton-plasmon interaction in individual nanowires and analyzed the spatially resolved nanocrystal emission for different nanowire length, SiO2-shell thickness, nanocrystal shape, pump power, and emission polarization. For an SiO2 spacer thickness of approximately 15 nm, we observed an efficient excitation of surface plasmons by excitonic emission of CdSe nanocrystals. For nanowire lengths up to approximately 10 microm, the composite metal-insulator-semiconductor nanowires ((Ag)SiO2)CdSe act as a waveguide for 1D-surface plasmons at optical frequencies with efficient photon outcoupling at the nanowire tips, which is promising for efficient exciton-plasmon-photon conversion and surface plasmon guiding on a submicron scale in the visible spectral range.     

Hierarchical Titanate Nanostructures through Hydrothermal Treatment of Commercial Titania Powders

Hierarchical titanate nanostructures were hydrothermally synthesized in concentrated base solutions using commercial titania powders as starting materials. By varying the base concentration, nanowire arrays, flowers of nanosheets and nanotubes, and urchin‐like nanostructures of nanowires and nanotubes were sequentially fabricated. If the NaOH concentration was higher than 6 M , hydrated Na₂Ti₆O₁₃ nanowire arrays, with nanowire diameters of 20–90 nm and an aspect ratio of 1100–5000, were produced at suitable reaction temperatures over a large area. In 10 M KOH solutions, aligned nanowires with a diameter of 30 nm and a lenght of 80 μm formed. In 4 M NaOH solutions, micrometer‐sized flowers of nanotubes and nanosheets formed. Reactions in 2 M NaOH solutions produced urchin‐like materials with a size of ca. 10 μm that were composed of nanotubes and nanowires. The adsorption behavior of the urchin‐like materials resembled macroporous materials with micropores. Since both base concentration and reaction temperature affected the reaction rate, the formation of various titanate nanostructures was proposed as a growth speed controlled process.     

金纳米线阵列制备及其光谱特性

利用电化学沉积方法在重离子径迹模板中制备出直径从45 nm到200 nm, 长径比达700的金纳米线阵列, 利用扫描电子显微镜(SEM)和X射线衍射(XRD)对所制备金纳米线的形貌及晶体结构进行分析, 结果表明, 在1.5 V(无参比电极)沉积电压下所制备出的直径为200 nm金纳米线沿[100]晶向具有较好择优取向. 利用紫外-可见光谱(UV-Vis)对镶嵌在透明模板中平行排列的金纳米线阵列光学特性进行研究, 发现金纳米线直径为45 nm时, 其紫外可见光谱在539 nm处有强烈吸收峰, 随着金纳米线直径增加, 吸收峰红移, 当金纳米线直径达到200 nm时, 其吸收峰峰位移至700 nm. 结合金纳米颗粒相关表面等离子体共振吸收效应对实验结果进行了讨论.     

SERS,AFM and Electrochemical Characterization of Metal Nanorod and Nanowire Arrays

Metal nanowires (nanorods) have novel properties and potential applications in a wide field^[1]. Many two-dimensional nanowire arrays of semiconductors and metals with different diameter and length have been made using template synthesis method^[2]. The nanorod arrays of various metals (e.g., Cu, Ag,Au, Ni and Co) with different diameters from about 15 nm to 130 nm were fabricated by electrodeposition of the metals into the highly ordered nanochannel arrays in alumina film followed by partial removal of the film in phosphoric acid or sodium hydroxide. In the present work, surface-enhanced Raman spectroscopy (SERS), AFM and electrochemical methods have been used to characterize the metal nanorod (nanowire) arrays. Tapping mode AFM and SERS were performed on Nanoscope Ⅲa (Digital Instruments) and on confocal Raman microscopy (LabRam I,Dilor) respectively.