Detection of p53 Gene by Using Genomagnetic Assay Combined with Carbon Nanotube Modified Disposable Sensor Technology

Electrochemical monitoring of DNA hybridization related to p53 gene sequence was investigated using genomagnetic assay combined with single walled carbon nanotube (SWCNT) modified pencil graphite electrodes (PGEs). The hybridization was performed either at magnetic beads (MB) surface or in solution. The enhanced guanine signal was obtained using SWCNT‐PGEs compared to one obtained by unmodified PGEs. The selectivity of genomagnetic assay was tested under optimum conditions. The DLs were calculated as 0.88 µM and 0.11 µM for hybridization performed at MB surface and solution, respectively. This selective, practical and cost effective genomagnetic assay combined with SWCNT‐PGEs is reported herein for the first time.     

Graphene Oxide Modified Chemically Activated Graphite Electrodes for Detection of microRNA

In our study, graphene oxide (GO) modified graphite electrodes were used for sensitive and selective impedimetric detection of miRNA. After chemical activation of pencil graphite electrode (PGE) surface using covalent agents (CA), GO modification was performed at the surface of chemically activated PGE. Then, CA‐GO‐PGEs were applied for impedimetric miRNA detection. The microscopic and electrochemical characterization of CA‐GO‐PGEs was performed by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The optimization of experimental conditions; such as GO concentration, DNA probe concentration and miRNA target concentration was performed by using EIS technique. After the hybridization occurred between miRNA‐34a RNA target and its complementary DNA probe, the hybrid was immobilized onto the surface of CA‐GO‐PGEs. Then, the impedimetric detection of miRNA‐DNA hybridization was performed by EIS. The selectivity of our assay was also tested under the optimum experimental conditions.     

Electrochemical Detection of Activated Protein C Using an Aptasensor Based on PAMAM Dendrimer Modified Pencil Graphite Electrodes

Electrochemical aptasensing of APC was carried out using PAMAM dendrimer modified pencil graphite electrodes (PGEs) for the first time herein. Poly(amidoamine) dendrimer having 16 succinamic acid surface groups (generation 2, G2‐PS) modified PGEs were developed, and then were utilized for APC monitoring using differential pulse voltammetry, electrochemical impedance spectroscopy and cyclic voltammetry. The selectivity of single‐use aptasensor was tested against to other proteins; BSA and THR as well as to the affinity of APC binding to different DNA aptamer, or oligonucleotide. Voltammetric APC detection was also explored in a diluted fetal bovine serum resulting with a detection limit DL as 1.5 µg/mL.     

Carbon Nanotubes Modified Graphite Electrodes for Monitoring of Biointeraction Between 6‐Thioguanine and DNA

In this present study, single‐walled carbon nanotubes (SWCNT) modified disposable pencil graphite electrodes (SWCNT‐PGEs) were developed for the electrochemical monitoring of anticancer drug, and its interaction with double stranded DNA (dsDNA). Under this aim, SWCNT‐PGEs were applied for the first time in the literature to analyse of 6‐Thioguanine (6‐TG), and also to investigate its interaction with DNA by voltammetric and impedimetric methods. The surface morphologies of PGE and SWCNT‐PGE were explored using scanning electron microscopy (SEM) and electrochemical characterization of unmodified/modified electrodes was performed by cyclic voltammetry (CV). Experimental parameters; such as, the concentration of 6‐TG and its interaction time with dsDNA were optimized by using differential pulse voltammetry (DPV). Additionally, the interaction of 6‐TG with dsDNA was studied in case of different interaction times by electrochemical impedance spectroscopy (EIS) in contrast to voltammetric results. The detection limit of 6‐TG was found to be 0.25 μM by SWCNT‐PGE.     

Recent developments on the modification of graphite electrodes with nanoparticles

The surface structure of common graphite electrodes are suitable for electrochemical detection of various analytes due to their favorable properties such as good conductivity and resistance to environmental and chemical hazards. Also this material is cheap and available. Modifying the surface of electrode improves their ability for various determinations. Modifying graphite electrodes with nanoparticles has attracted lots of attention due to their unique characteristics. In this article we review applications of modified graphite electrodes with nanomaterials.     

Dendrimer modified graphite sensors for detection of anticancer drug Daunorubicin by voltammetry and electrochemical impedance spectroscopy

The development of amino-terminated G4 PAMAM dendrimer (PDR) modified disposable electrodes were developed as the first time in our study by using the dendrimer modified disposable graphite (PDR-PGE) and multiwalled carbon nanotube based screen-printed graphite (PDR-MWCNT-SPE) electrodes. Firstly, the microscopic characterization of bare PGEs and PDR modified PGEs was performed. These sensors were then applied for electrochemical monitoring of an anticancer drug, Daunorubicin (DNR). The enhanced oxidation signal of DNR was measured at +0.50 V by using differential pulse voltammetry (DPV) in combination with the PDR-PGEs. The detection limit, estimated from S/N = 3, corresponds accordingly to 317 nM and 128 nM for DNR respectively at the PGE and PDR-PGE. The voltammetric results were consistent with electrochemical impedance spectroscopy (EIS) that was used to characterize the successful modification of PDR onto the surface of PGE and MWCNT-SPE.     

Functionalized Carbon Nanoparticles,Blacks and Soots as Electron‐Transfer Building Blocks and Conduits

Functionalized carbon nanoparticles (or blacks) have promise as novel active high‐surface‐area electrode materials, as conduits for electrons to enzymes or connections through lipid films, or as nano‐building blocks in electroanalysis. With previous applications of bare nanoblacks and composites mainly in electrochemical charge storage and as substrates in fuel cell devices, the full range of benefits of bare and functionalized carbon nanoparticles in assemblies and composite (bio)electrodes is still emerging. Carbon nanoparticles are readily surface‐modified, functionalized, embedded, or assembled into nanostructures, employed in bioelectrochemical systems, and incorporated into novel electrochemical sensing devices. This focus review summarizes aspects of a rapidly growing field and some of the recent developments in carbon nanoparticle functionalization with potential applications in (bio)electrochemical, photoelectrochemical, and electroanalytical processes.     

Electrospun‐Technology‐Derived High‐Performance Electrochemical Energy Storage Devices

Electrospinning, as a novel nontextile filament technology, is an important method to prepare continuous nanofibers and has shown its remarkable advantages, such as a broadly applicable material system, controllable fiber size and structure, and simple process. Electrospun nanofiber membranes prepared by electrospinning have shown promising applications in many fields, such as supercapacitors, lithium‐ion batteries, and sodium‐ion batteries, owing to their large specific surface area and adjustable network pore structure. The principle of electrospinning and key points relevant to its usage in the preparation of high‐performance electrochemical energy storage materials are reviewed herein based on recent publications, particularly focusing on research progress of relative materials. Also, this review describes a distinctive conclusion and perspective on the future challenges and opportunities in electrospun nanomaterials.     

Functionalized Carbon Nanomaterials Derived from Carbohydrates

A tremendous growth in the field of carbon nanomaterials has led to the emergence of carbon nanotubes, fullerenes, mesoporous carbon and more recently graphene. Some of these materials have found applications in electronics, sensors, catalysis, drug delivery, composites, and so forth. The high temperatures and hydrocarbon precursors involved in their synthesis usually yield highly inert graphitic surfaces. As some of the applications require functionalization of their inert graphitic surface with groups like ? COOH, ? OH, and ? NH₂, treatment of these materials in oxidizing agents and concentrated acids become inevitable. More recent works have involved using precursors like carbohydrates to produce carbon nanostructures rich in functional groups in a single‐step under hydrothermal conditions. These carbon nanostructures have already found many applications in composites, drug delivery, materials synthesis, and Li ion batteries. The review aims to highlight some of the recent developments in the application of carbohydrate derived carbon nanostructures and also provide an outlook of their future prospects.     

Tin oxide nanoparticles-polymer modified single-use sensors for electrochemical monitoring of label-free DNA hybridization

In this study, SnO₂ nanoparticles (SNPs)-poly(vinylferrocenium) (PVF⁺) modified single-use graphite electrodes were developed for electrochemical monitoring of DNA hybridization. The surfaces of polymer modified and polymer-SNP modified pencil graphite electrodes (PGEs) were firstly characterized by using SEM analysis. The electrochemical behaviours of these electrodes were also investigated using the differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) techniques. The polymer-SNP modified PGEs were then tested for the electrochemical sensing of DNA based on the changes at the guanine oxidation signals. Experimental parameters, such as; different modifications in DNA oligonucleotides, DNA probe concentrations were examined to obtain more sensitive and selective electrochemical signals for nucleic acid hybridization. After optimization studies, DNA hybridization was investigated in the case of complementary of hepatitis B virus (HBV) probe, mismatch (MM), and noncomplementary (NC) sequences.     

Nanobioelectroanalysis Based on Carbon/Inorganic Hybrid Nanoarchitectures

The emergence of nanotechnology has opened new horizons for electrochemical biosensors. This review highlights new concepts for electrochemical biosensors based on different carbon/inorganic hybrid nanoarchitectures. Particular attention will be given to hybrid nanostructures involving 1‐ or 2‐dimensional carbon nanotubes or graphene along with inorganic nanoparticles (gold, platinum, quantum dot (QD), metal oxide). Latest advances (from 2007 onwards) in electrochemical biosensors based on such hybrids of carbon/inorganic‐nanomaterial heterostructures are discussed and illustrated in connection to enzyme electrodes for blood glucose or immunoassays of cancer markers. Several strategies for using carbon/inorganic nanohybrids in such bioaffinity and biocatalytic sensing are described, including the use of hybrid nanostructures for tagging or modifying electrode transducers, use of inorganic nanomaterials as surface modifiers along with carbon nanomaterial label carriers, and carbon nanostructure‐based electrode transducers along with inorganic amplification tags. The implications of these nanoscale bioconjugated hybrid materials on the development of modern electrochemical biosensors are discussed along with future prospects and challenges.     

Direct DNA Hybridization on the Single‐Walled Carbon Nanotubes Modified Sensors Detected by Voltammetry and Electrochemical Impedance Spectroscopy

Carboxylic acid functionalized single‐walled carbon nanotubes modified graphite sensors (SWCNT‐PGEs) were developed for electrochemical monitoring of direct DNA hybridization related to specific sequence of Hepatitis B virus, which substantially enhance the electrochemical transduction resulting from guanine oxidation signal comparison to bare PGEs. The performance characteristics of DNA hybridization on disposable CNT‐PGE were explored measuring the guanine signal in terms of optimum analytical conditions; probe and target concentration, hybridization time, and selectivity. The voltammetric results were also complemented with electrochemical impedance spectroscopy (EIS), that was used to characterize the successful construction of carbon nanotubes modification onto the surface of PGEs.     

Electrochemical Detection of Phenol Removal by Using a Biosorbent Originated Factory Solid Waste

Biosorption is a preferable method for phenol (PNL) removal from water sources using a cheap and eco-friendly biomass. The combination of the biosorption technique with practical, affordable, sensitive, and selective monitoring tools gives a new perspective to environmental monitoring applications. Herein, as the first time, the monitoring of PNL biosorption performed using a factory waste was done by pencil graphite electrodes (PGEs) and cyclic voltammetry (CV) technique. The monitoring of the biosorption process was completed with reproducible and reliable results in just 40s. The biosorption was achieved in different water samples and the presence of different phenolic compounds.     

分级纳米材料的结构、制备及其应用

纳米材料因其独特的表面效应、体积效应和量子效应等特点,在化工、生物工程、医学和能源等领域有着广阔的应用。 由简单的低维纳米结构作为主要的构建单元并按照特定的排列方式组装成规整有序的三维结构,即分级纳米结构,已经开展了许多的研究。 本文综述了分级纳米结构的制备方法和微观结构,及其在污水处理、超级电容器、太阳能电池以及光催化等领域的应用。     

Upconversion in Nanostructured Materials: From Optical Tuning to Biomedical Applications

Photon upconversion that is characterized by high‐energy photon emission followed by lower‐energy excitation has been conventionally studied in bulk materials for several decades. This unique nonlinear luminescence process has become a subject of great attention since 2000 when upconverted emission was demonstrated in nanostructured crystals. In comparison with their bulk counterparts, nanostructured materials provide more room for optical fine‐tuning by allowing flexible compositional integration and structural engineering. Moreover, the high colloidal stability of nanoparticles coupled with high amenability to surface functionalization opens up a number of new applications for upconversion, especially in the fields of biology and life science. In this focus review, we discuss recent developments in upconversion materials through nanostructural design and review emerging biomedical applications that involve these nanostructured upconversion materials. We also attempt to highlight challenging problems of these nanomaterials that constrain further progress in utilizing upconversion processes.     

Electrocatalysis Using Porous Nanostructured Materials

The performance of electrochemical reactions depends strongly on the morphology and structure of the employed catalytic electrodes. Nanostructuring of the electrode surface represents a powerful tool to increase the electrochemically active surface area of the electrodes. Moreover, it can also facilitate faster diffusive mass transport inside three‐dimensional electrodes. This minireview describes recent trends in the development of synthesis routes for porous nanostructured electrode materials and discusses the respective important electrocatalytic applications. The use of structure‐directing agents will play a decisive role in the design and synthesis of improved catalysts.     

Multisegmented one-dimensional nanorods prepared by hard-template synthetic methods

In the science and engineering communities, the nanoscience revolution is intensifying. As many types of nanomaterials are becoming more reliably synthesized, they are being used for novel applications in all branches of nanoscience and nanotechnology. Since it is sometimes desirable for single nanomaterials to perform multiple functions simultaneously, multicomponent nanomaterials, such as core-shell, alloyed, and striped nanoparticles, are being more extensively researched. Nanoscientists hope to design multicomponent nanostructures and exploit their inherent multiple functionalities for use in many novel applications. This review highlights recent advances in the synthesis of multisegmented one-dimensional nanorods and nanowires with metal, semiconductor, polymer, molecular, and even gapped components. It also discusses the applications of these multicomponent nanomaterials in magnetism, self-assembly, electronics, biology, catalysis, and optics. Particular emphasis is placed on the new materials and devices achievable using these multicomponent, rather than single-component, nanowire structures.     

Recent advances in graphite powder-based electrodes

Graphite powder-based electrodes have the electrochemical performance of quasi-noble metal electrodes with intrinsic advantages related to the possibility of modification to enhance selectivity and their easily renewable surface, with no need for hazardous acids or bases for their cleaning. In contrast with commercial electrodes, for example screen-printed or sputtered-chip electrodes, graphite powder-based electrodes can also be fabricated in any laboratory with the form and characteristics desired. They are also readily modified with advanced materials, with relatively high reproducibility. All these characteristics make them a very interesting option for obtaining a large variety of electrodes to resolve different kinds of analytical problems. This review summarizes the state-of-the-art, advantages, and disadvantages of graphite powder-based electrodes in electrochemical analysis in the 21st century. It includes recent trends in carbon paste electrodes, devoting special attention to the use of emergent materials as new binders and to the development of other composite electrodes. The most recent advances in the use of graphite powder-modified sol–gel electrodes are also described. The development of sonogel–carbon electrodes and their use in electrochemical sensors and biosensors is included. These materials extend the possibilities of applications, especially for industrial technology-transfer purposes, and their development could affect not only electroanalytical green chemistry but other interesting areas also, for example catalysis and energy conversion and storage.     

Screen printed graphite macroelectrodes for the direct electron transfer of cytochrome c

We report the direct electrochemistry of cytochrome c at screen printed graphite electrodes which exhibits quasi-reversible voltammetric responses without the need for any chemical or electrochemical pre-treatment, use of mediators or nanomaterials. Through voltammetric studies and X-ray photoelectron spectroscopy (XPS) it is shown that carbonyl and carboxylic surface oxygenated species likely residing at edge plane like- sites/defects of the graphite comprising the screen printed electrodes are responsible for the favourable interaction of the cytochrome c with that of the screen printed electrochemical sensing platform.     

Hydroxyapatite Nanoparticles Modified Graphite Electrodes for Electrochemical DNA Detection

Hydroxyapatite nanoparticles (HaNP) modified pencil graphite electrodes (PGEs) were developed for the first time in the literature, and accordingly they were applied for electrochemical monitoring of sequence‐selective DNA hybridization. The experimental conditions for HaNP modification of PGE, and DNA hybridization related to Hepatitis B Virus (HBV) DNA sequence were optimized. The microscopic and electrochemical characterization of HaNP‐PGE in contrast to the unmodified one was utilized. Under optimized experimental conditions, the selectivity of HBV DNA probe immobilized biosensor was tested against to non‐complementary (NC), mismatch (MM) sequences and the mixture of target:NC (1 : 1) or target: MM (1 : 1).