How many proteins can be identified in a 2DE gel spot within an analysis of a complex human cancer tissue proteome?

Two‐dimensional gel electrophoresis (2DE) in proteomics is traditionally assumed to contain only one or two proteins in each 2DE spot. However, 2DE resolution is being complemented by the rapid development of high sensitivity mass spectrometers. Here we compared MALDI‐MS, LC‐Q‐TOF MS and LC‐Orbitrap Velos MS for the identification of proteins within one spot. With LC‐Orbitrap Velos MS each Coomassie Blue‐stained 2DE spot contained an average of at least 42 and 63 proteins/spot in an analysis of a human glioblastoma proteome and a human pituitary adenoma proteome, respectively, if a single gel spot was analyzed. If a pool of three matched gel spots was analyzed this number further increased up to an average of 230 and 118 proteins/spot for glioblastoma and pituitary adenoma proteome, respectively. Multiple proteins per spot confirm the necessity of isotopic labeling in large‐scale quantification of different protein species in a proteome. Furthermore, a protein abundance analysis revealed that most of the identified proteins in each analyzed 2DE spot were low‐abundance proteins. Many proteins were present in several of the analyzed spots showing the ability of 2DE‐MS to separate at the protein species level. Therefore, 2DE coupled with high‐sensitivity LC‐MS has a clearly higher sensitivity as expected until now to detect, identify and quantify low abundance proteins in a complex human proteome with an estimated resolution of about 500 000 protein species. This clearly exceeds the resolution power of bottom‐up LC‐MS investigations.     

Performance of nondenaturing micro 2-DE followed by third-dimension SDS-PAGE in the analysis of Escherichia coli soluble proteins

In a previous paper, we reported on the analysis of Escherichia coli (strain K‐12) soluble proteins by nondenaturing micro 2‐DE/3‐DE and MALDI‐MS‐PMF [Manabe, T., Jin, Y., Electrophoresis 2010, 31, 2740–2748]. To evaluate the performance of the 2‐DE/3‐DE technique, a nondenaturing 2‐DE gel just after the second‐dimension run was cut into 12 vertical strips, each 2 mm‐wide strip was set on a micro slab gel, and third‐dimension SDS‐PAGE was run in parallel. Each of the twelve 3‐DE gels showed about 150–200 CBB‐stained spots. Two of the 3‐DE gels were selected for the assignment of polypeptides using MALDI‐MS‐PMF and totally 161 polypeptides were assigned on the two 3‐DE gels, in which 81 have been assigned on the nondenaturing micro 2‐DE gel and 80 were newly assigned. Most of the newly assigned polypeptides resided in faintly stained spots on the 3‐DE gels, which indicates that the polypeptides were purified in the process of the third‐dimension separation. The comparisons of the apparent mass values estimated from the second‐dimension (nondenaturing pore‐gradient PAGE) mobility with those estimated from the third‐dimension (SDS‐PAGE) mobility suggested the oligomer structures of the assigned polypeptides and they matched well with those described in a database (UniProtKnowledgebase). The technique of nondenaturing micro 2‐DE/3‐DE, combined with MALDI‐MS‐PMF, could become an efficient method to obtain information on the quaternary structures of hundreds of cellular soluble proteins simultaneously because of its high efficiency in protein/polypeptide separation and assignment.     

Global mapping of rat plasma proteins with a native proteomic approach using nondenaturing micro 2DE and quantitative LC‐MS/MS

Plasma samples from adult male rats were separated by nondenaturing micro 2DE and a reference gel was selected, on which 136 CBB‐stained spots were numbered and subjected to in‐gel digestion and quantitative LC‐MS/MS. The analysis provided the assignment of 1–25 (average eight) non‐redundant proteins in each spot and totally 199 proteins were assigned in the 136 spots. About 40% of the proteins were detected in more than one spot and 15% in more than ten spots. We speculate this complexity arose from multiple causes, including protein heterogeneity, overlapping of protein locations and formation of protein complexes. Consequently, such results could not be appropriately presented as a conventional 2DE map, i.e. a list or a gel pattern with one or a few proteins annotated to each spot. Therefore, the LC‐MS/MS quantity data was used to reconstruct the gel distribution of each protein and a library containing 199 native protein maps was established for rat plasma. Since proteins that formed a complex would migrate together during the nondenaturing 2DE and thus show similar gel distributions, correlation analysis was attempted for similarity comparison between the maps. The protein pairs showing high correlation coefficients included some well‐known complexes, suggesting the promising application of native protein mapping for interaction analysis. With the importance of rat as the most commonly used laboratory animal in biomedical research, we expect this work would facilitate relevant studies by providing not only a reference library of rat plasma protein maps but a means for functional and interaction analysis.     

Native protein mapping and visualization of protein interactions in the area of human plasma high‐density lipoprotein by combining nondenaturing micro 2DE and quantitative LC‐MS/MS

A human plasma sample was subjected to nondenaturing micro 2DE and a gel area (5 mm × 18 mm) that includes high‐density lipoprotein (HDL) was cut into 1 mm × 1 mm squares, then the proteins in the 90 gel pieces were analyzed by quantitative LC‐MS/MS. Grid‐cutting of the gel was employed to; (i) ensure the total analysis of the proteins in the area, (ii) standardize the conditions of analysis by LC‐MS/MS, (iii) reconstruct the protein distribution patterns from the quantity data. Totally 154 proteins were assigned in the 90 gel pieces and the quantity distribution of each was reconstructed as a color density pattern (a native protein map). The map of apolipoprotein (Apo) A‐I showed a wide apparent mass distribution characteristic to HDL and was compared with the maps of the other 153 proteins. Eleven proteins showed maps of wide distribution that overlapped with the map of Apo A‐I, and all have been reported to be the components of HDL. Further, seven minor proteins associated with HDL were detected at the gel positions of high Apo A‐I quantity. These results for the first time visualized the localization of HDL apolipoproteins on a nondenaturing 2DE gel and strongly suggested their interactions.     

Optimized sample-processing time and peptide recovery for the mass spectrometric analysis of protein digests

Proteomics requires an optimized level of sample-processing, including a minimal sample-processing time and an optimal peptide recovery from protein digests, in order to maximize the percentage sequence coverage and to improve the accuracy of protein identification. The conventional methods of protein characterization from one-dimensional or two-dimensional gels include the destaining of an excised gel piece, followed by an overnight in-gel enzyme digestion. The aims of this study were to determine whether: (1) stained gels can be used without any destaining for trypsin digestion and mass spectrometry (MS); (2) tryptic peptides can be recovered from a matrix-assisted laser desorption/ionization (MALDI) target plate for a subsequent analysis with liquid chromatography (LC) coupled to an electrospray ionization (ESI) quadrupole ion trap MS; and (3) an overnight in-gel digestion is necessary for protein characterization with MS. These three strategies would significantly improve sample throughput. Cerebrospinal fluid (CSF) was the model biological fluid used to develop these methods. CSF was desalted by gel filtration, and CSF proteins were separated by two-dimensional gel electrophoresis (2DGE). Proteins were visualized with either silver, Coomassie, or Stains-All (counterstained with silver). None of the gels was destained. Protein spots were in-gel trypsin digested, the tryptic peptides were purified with ZipTip, and the peptides were analyzed with MALDI and ESI MS. Some of the samples that were spotted onto a wax-coated MALDI target plate were recovered and analyzed with ESI MS. All three types of stained gels were compatible with MALDI and ESI MS without any destaining. In-gel trypsin digestion can be performed in only 10-60 min for protein characterization with MS, the sample can be recovered from the MALDI target plate for use in ESI MS, and there was a 90% reduction in sample-processing time from overnight to ca. 3 h.     

Coomassie staining provides routine (sub)femtomole in‐gel detection of intact proteoforms: Expanding opportunities for genuine Top‐down Proteomics

Modified colloidal Coomassie Brilliant Blue (cCBB) staining utilising a novel destain protocol and near‐infrared fluorescence detection (nIRFD) rivals the in‐gel protein detection sensitivity (DS) of SYPRO Ruby. However, established DS estimates are likely inaccurate in terms of 2DE‐resolved proteoform ‘spots’ since DS is routinely measured from comparatively diffuse protein ‘bands’ following wide‐well 1DE. Here, cCBB DS for 2DE‐based proteomics was more accurately determined using narrow‐well 1DE. As precise estimates of protein standard monomer concentrations are essential for accurate quantitation, coupling UV absorbance with gel‐based purity assessments is described. Further, as cCBB is compatible with both nIRFD and densitometry, the impacts of imaging method (and image resolution) on DS were assessed. Narrow‐well 1DE enabled more accurate quantitation of cCBB DS for 2DE, achieving (sub)femtomole DS with either nIRFD or densitometry. While densitometry offers comparative simplicity and affordability, nIRFD has the unique potential for enhanced DS with Deep Imaging. Higher‐resolution nIRFD also improved analysis of a 2DE‐resolved proteome, surpassing the DS of standard nIRFD and densitometry, with nIRFD Deep Imaging further maximising proteome coverage. cCBB DS for intact proteins rivals that of mass spectrometry (MS) for peptides in complex mixtures, reaffirming that 2DE‐MS currently provides the most routine, broadly applicable, robust, and information‐rich Top‐down approach to Discovery Proteomics.     

Relative quantification of erythropoietin receptor-dependent phosphoproteins using in-gel 18O-labeling and tandem mass spectrometry

On examining different proteomics approaches for the investigation of structure-function relationships of erythropoietin (EPO) receptor signaling, it was found that two-dimensional gel electrophoresis/mass spectrometry procedures are clearly limited in their ability to detect low-expressed signaling proteins. Instead it was found that a strategy involving anti-phosphotyrosine immunoprecipitation, one-dimensional gel electrophoresis (1DE), and capillary liquid chromatography/tandem mass spectrometry (LC/MS/MS) provides the sensitivity required for identification of signaling proteins. In the present work the immunoprecipitation/1DE/LC/MS approach was combined with an in-gel 18O-labeling technique to analyze EPO receptor-dependent proteins. Identification and relative quantification of more than 180 EPO receptor-dependent proteins were achieved directly based on the in-gel 18O-labeling approach.     

Horizontal comparative fluorescence two‐dimensional gel electrophoresis for improved spot coordinate detection

Vertical comparative 2D fluorescence gel electrophoresis (CoFGE) has recently been shown to increase the reproducibility of coordinate assignment for protein spots, in particular in singular experiments, which cannot be investigated using DIGE. The method applies a standardized marker grid formed by a set of purified proteins to the sample proteome in a conglomerate of 1DE, 2DE, and DIGE. Here, improvements are demonstrated by transferring CoFGE to horizontal 2DE. These include the elimination of the protein modification by residual acrylamide monomer unavoidable in vertical CoFGE, reduced buffer volumes, and highly efficient laboratory procedures. Spot patterns are well defined and can be easily analyzed using commercially available warping algorithms. With horizontal CoFGE also a correction for changes in pI was introduced using a third fluorescent dye. Horizontal CoFGE holds high promises in comparative proteomics.     

Analysis of E. coli soluble proteins by non‐denaturing micro 2‐DE/3‐DE and MALDI‐MS‐PMF

Escherichia coli (strain K‐12)‐soluble proteins were analyzed by nondenaturing micro 2‐DE and MALDI‐MS‐PMF. The reported conditions of nondenaturing IEF in agarose column gels [Jin, Y., Manabe, T., Electrophoresis 2009, 30, 939–948] were modified to optimize the resolution of cellular soluble proteins. About 300 CBB‐stained spots, the apparent molecular masses of which ranged from ca. 6000 to 10 kDa, were detected. All the spots on two reference 2‐DE gels (one for wide mass range and one for low‐molecular‐mass range) were numbered and subjected to MALDI‐MS‐PMF for the assignment of constituting polypeptides. Most of the spots (310 spots out of 329) provided significant match (p<0.05) with polypeptides in Swiss‐Prot database and totally 228 polypeptide species were assigned. Activity staining of enzymes such as alkaline phosphatase and catalases was performed on the 2‐DE gels and the locations of the activity spots matched well with those of the MS‐assigned polypeptides of the enzymes. Most of the polypeptides with subunit information in Swiss‐Prot (119 polypeptides as homo‐multimers and 25 as hetero‐multimers out of the 228), such as pyruvate dehydrogenase complex which is composed of three enzymatic components, were detected at the apparent mass positions of their polymers, suggesting that the proteins were separated retaining their subunit structures. When a nondenaturing 2‐DE gel was vertically cut into 2 mm strips and one of the strips was subjected to a third‐dimension micro SDS‐PAGE (micro 3‐DE), about 190 CBB‐stained spots were detected. The assignment of the polypeptides separated on the 3‐DE gel would further provide information on protein/polypeptide interactions.     

Double electrophoretic separation and lectin analyses of the component chains of secretory immunoglobulin A from human saliva

A new method is presented for the separation of secretory immunoglobulin A (SIgA) from salivary samples. Salivary proteins (from parotid or stimulated whole mouth saliva) were precipitated with methanol to concentrate SIgA from salivary samples whilst removing other salivary proteins. SIgA purified from breast milk and salivary proteins was separated by 10% sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) under nonreducing conditions. Following completion of electrophoresis the top strip of gel was removed and the proteins present reduced with dithiothreitol. The gel strip was then applied to the top of a second 10% SDS gel, and the proteins were electrophoresed and then stained by Coomassie Brilliant Blue R-250. Three major protein bands were stained in all samples corresponding in molecular mass to secretory component, alpha-heavy chain and light chains of SIgA. Separated proteins were also electroblotted onto nitrocellulose and stained by fluorescein isothiocyanate (FITC). Lectin analysis was then used to detect the O-glycans present on IgA1. Lectins from Helix aspersa and Arachis hypogaea were used to determine the amount of terminal N-acetyl galactosamine and nonsialylated O-glycans, respectively. Maclura pomifera lectin was used to determine the total amount of IgA1 present on the blots. The results indicate that SlgA in stimulated whole mouth saliva, stimulated parotid saliva and purified from breast milk contain similar O-glycans.     

Mass spectrometric characterization of low-molecular-mass color pI markers and their use for direct determination of pI value of proteins

The use of low-molecular-mass color pI markers for the determination of pI values of proteins in gel isoelectric focusing (IEF) in combination with mass spectrometry is described. Different types of substituted phenols of known pI values within the mass range 250-400 were used here as pI markers. The pure, synthesized pI markers were studied by MALDI-TOF/TOF MS. Fragmentation studies of the pI markers were also performed. Only stable and well-characterized pI markers were used in this work. The selected pI markers were mixed with proteins, deposited on a gel and separated in a pH gradient. Color pI markers enable supervision of progress of the focusing process and also estimation of the position of the invisible focused bands. The separated bands of the pI markers (containing separated proteins) were excised, and the pI markers were eluted from each gel piece by water/ethanol and identified by MALDI-TOF/TOF MS. From the washed gel pieces the remaining carrier ampholytes were then washed out and proteins were in-gel digested with trypsin. The obtained peptides were measured by MALDI-TOF/TOF MS and the proteins identified via a protein database search. This procedure allows avoiding time-consuming protein staining and destaining procedures, which shortens the analysis time roughly by half. For comparison, IEF gels were stained with Coomassie Brilliant Blue R 250 and proteins in the gel bands were identified according to the standard proteomic protocol. This work has confirmed that our approach can give information about the correct pI values of particular proteins and shorten significantly the time of analysis.     

Improved detection of lymphocyte membrane proteins in purified form and as a crude mixture using native and denaturing polyacrylamide gel electrophoresis by optimisation of coomassie brilliant blue and silver staining.

Optimised silver staining protocols were devised for the detection of membrane proteins in purified form and as a crude mixture. These were adduced in both sodium dodecyl sulphate (SDS) and native polyacrylamide gel electrophoresis and consisted of ethanol-acetic acid-formaldehyde fixation, Coomassie Brilliant Blue prestaining, Rapidfix pretreatment, formaldehyde enhancement and finally ammoniacal silver staining. With these modifications, numerous staining problems of membrane proteins were overcome. These included reduction in background staining, enhanced detection sensitivity in native gels, elimination of negative staining and the avoidance of metallic silver deposition on the gel surface. In overcoming these problems, some factors determining the colour and stainability of membrane proteins in their native state were determined. Both the anionic Coomassie Brilliant Blue dye and SDS detergent improved the sensitivity of silver staining in native gels, and ammoniacal silver was more sensitive than neutral silver, suggesting silver staining to be a charge dependent process.     

Improved dynamic range of protein quantification in silver‐stained gels by modelling gel images over time

Silver staining is a commonly used protein stain to visualise proteins separated by 2‐DE. Despite this, the technique suffers from a limited dynamic range, making the simultaneous quantification of high‐ and low‐abundant proteins difficult. In this paper we take advantage of the fact that silver staining is not an end‐point stain by photographing the gels during development. This procedure provides information about the change in measured absorbance for each pixel in the protein spots on the gel. The maximum rate of change was found to be correlated with the amount of applied protein, providing a new way of estimating protein amount in 2‐DE gels. We observed an improvement in the dynamic range of silver staining by up to two orders of magnitude.     

Analysis of tear protein patterns of dry-eye patients using fluorescent staining dyes and two-dimensional quantification algorithms.

Tear proteins of nonstimulated tears of 29 patients (healthy subjects, n = 8; dry-eye syndrome patients, n = 12; diabetic dry-eye patients, n = 9) were electrophoretically separated and stained by SYPRO Orange, followed by Coomassie blue staining. Both, the fluorescent and the Coomassie stains were subsequently analyzed by an automated two-dimensional algorithm for finding and quantification of peaks and by a discriminant analysis. Using SYPRO Orange, an average number of peaks/sample between three (at 200 ms) and 15 (at 3000 ms) could be found. In comparison, Coomassie staining resulted only in an average number of six peaks/sample. This corresponds to a sensitivity obtained at approx. 400-600 ms exposure time of SYPRO Orange stained gels. For all exposure times, the protein patterns of the three clinical groups were statistically significantly different from each other (P < 0.05). Only at 200 ms the distances between the groups decreased slightly. The Coomassie-stained gels revealed only a mid range discrimination power similar to that of 200-400 ms exposure in the fluorescing gels. The use of SYPRO Orange provides faster results than those obtained by Coomassie staining. In addition, the sensitivity of staining can be varied even in the same gel by changing the exposure time. The use of the two-dimensional algorithm allows to distinguish between the three clinical groups in accordance to earlier studies using one-dimensional densitographic raw data. Thus, the high speed of evaluation and the more sensitive results as compared to earlier studies could be a step further in the use of tear protein patterns in the diagnosis of DRY.     

Analysis of low‐density lipoprotein‐associated proteins using the method of digitized native protein mapping

The method of digitized native protein mapping, combining nondenaturing micro 2DE, grid gel‐cutting, and quantitative LC‐MS/MS (in data‐independent acquisition mode, or MS^E), was improved by using a new MS/MS mode, ion mobility separation enhanced‐MS^E (HDMS^E), and applied to analyze the area of human plasma low‐density lipoprotein (LDL). An 18 mm × 4.8 mm rectangular area which included LDL on a nondenaturing micro 2D gel of human plasma was grid‐cut into 72 square gel pieces and subjected to quantitative LC‐MS/MS. Compared with MS^E, HDMS^E showed significantly higher performance, by assigning 50% more proteins and detecting each protein in more squares. A total of 253 proteins were assigned with LC‐HDMS^E and the quantity distribution of each was reconstructed as a native protein map. The maps showed that Apo B‐100 was the most abundant protein in the grid‐cut area, concentrated at pI ca. 5.4–6.1 and apparent mass ca. 1000 kDa, which corresponded to four gel pieces, squares 39–42. An Excel macro was prepared to search protein maps which showed protein quantity peaks localized within this concentrated region of Apo B‐100. Twenty‐two proteins out of the 252 matched this criterion, in which 19 proteins have been reported to be associated with LDL. This method only requires several microliters of a plasma sample and the principle of the protein separation is totally different from the commonly used ultracentrifugation. The results obtained by this method would provide new insights on the structure and function of LDL.     

Guanidination chemistry for qualitative and quantitative proteomics

The application of guanidination chemistry, the conversion of lysine into homoarginine residues, is used to illustrate several important general considerations relating to the use of differential isotope labelling for relative quantification in proteomics. The derivatisation procedure has been optimised for automation using a liquid handling station designed for proteomics. Automated application of the procedure to the analysis of in-gel tryptic digests of multiple spots from the two-dimensional gel electrophoretic (2DE) analysis of proteins from the FDCP-mix cell line shows near-universal improvement in protein identification as a result of derivatisation. This chemistry has been extended for relative quantification, applicable to matrix-assisted laser desorption/ionisation mass spectrometry (MALDI-MS) and also tandem mass spectrometry (MS/MS). It provides a robust method for the quantitative comparison of two samples that have been separated by 2DE. A peptide pair may display poor detection during MS analysis, causing their reliable relative quantification to be difficult. In such circumstances, the additional selectivity of detection provided by MS/MS can substantiate identification and allow relative quantification of these species via product ion signal ratios.     

Glucose/Ribitol Dehydrogenase and 16.9 kDa Class I Heat Shock Protein 1 as Novel Wheat Allergens in Baker’s Respiratory Allergy

Wheat allergens are responsible for symptoms in 60–70% of bakers with work-related allergy, and knowledge, at the molecular level, of this disorder is progressively accumulating. The aim of the present study is to investigate the panel of wheat IgE positivity in allergic Italian bakers, evaluating a possible contribution of novel wheat allergens included in the water/salt soluble fraction. The water/salt-soluble wheat flour proteins from the Italian wheat cultivar Bolero were separated by using 1-DE and 2-DE gel electrophoresis. IgE-binding proteins were detected using the pooled sera of 26 wheat allergic bakers by immunoblotting and directly recognized in Coomassie stained gel. After a preparative electrophoretic step, two enriched fractions were furtherly separated in 2-DE allowing for detection, by Coomassie, of three different proteins in the range of 21–27 kDa that were recognized by the pooled baker’s IgE. Recovered spots were analyzed by nanoHPLC Chip tandem mass spectrometry (MS/MS). The immunodetected spots in 2D were subjected to mass spectrometry (MS) analysis identifying two new allergenic proteins: a glucose/ribitol dehydrogenase and a 16.9 kDa class I heat shock protein 1. Mass spectrometer testing of flour proteins of the wheat cultivars utilized by allergic bakers improves the identification of until now unknown occupational wheat allergens.     

Evaluation of gel electrophoresis conditions for the separation of metal‐tagged proteins with subsequent laser ablation ICP‐MS detection

Although laser ablation (LA)‐ICP‐MS has been reported for the determination of metalloproteins separated by gel electrophoretic techniques (GE), systematic studies that define the conditions essential for successful measurements are still scarce. In this paper we present the results of our studies of basic conditions for the effective application of GE‐LA‐ICP‐MS for the separation of metal‐binding proteins, focusing on their stability during GE and post‐separation gel treatment. The stability of metal–protein complexes (haemoglobin, myoglobin, superoxide dismutase, carbonic anhydrase, transferrin, albumin, cytochrome c) during GE is dependent on the nature of the metal–protein interaction and the principle of separation. We have observed that non‐denaturing GE is a suitable separation technique for most metal–protein complexes (e.g. Zn in carbonic anhydrase and Fe in Tf and myoglobin were quantitatively recovered in a spiked liver cytosol), whereas separation by denaturing GE strongly impaired the stability of the complexes. Equally important is the post‐separation treatment of the gel to enable successful detection of the metal. LA‐ICP‐MS requires drying of the gel without loss of protein‐bound metal or cracking of the gel. This was successfully achieved using glycerol followed by heating. We demonstrate that staining of the gel prior to LA‐ICP‐MS using silver or Coomassie blue is not recommended, since most protein‐bound metal is lost during the staining procedure. Furthermore it has been shown that only line scanning with a speed of less than 30 μm/s can reliably distinguish between lines 1 mm apart, while raster spot analysis carries the risk of misinterpretation due to contamination in/on inhomogeneous gels.     

Quantitative proteomics by fluorescent labeling of cysteine residues using a set of two cyanine‐based or three rhodamine‐based dyes

Despite all remarkable progress in gel‐based proteomics in recent years, there is still need to further improve quantification by decreasing the detection limits and increasing the dynamic range. These criteria are achieved best by fluorescent dyes that specifically stain the proteins either by adsorption after gel electrophoresis (in‐gel staining) or covalent coupling prior to gel electrophoresis (in‐solution staining). Here we report a multiplex analysis of protein samples using maleimide‐activated cyanine‐based (Cy3 and Cy5) and rhodamine‐based dyes (Dy505, Dy535, and Dy635) to permanently label all thiol‐groups of cysteine‐containing proteins. The detection limits in SDS‐PAGE were about 10 ng per band and even 2 ng for BSA due to its high content of cysteine residues. Thus only 5 μg protein of a mouse brain homogenate were analyzed by 2‐DE. Both cyanine‐ and rhodamine‐based dyes also stained proteins that did not contain cysteines, probably by reaction with amino groups. This side reactivity did not limit the method and might even extend its general use to proteins missing cysteine residues, but at a lower sensitivity. The dynamic range was more than two orders of magnitude in SDS‐PAGE and the Dy‐fluorophores did not alter the mobility of the tested proteins. Thus, a mixture of Dy505‐, Dy555‐, and Dy635‐labeled Escherichia coli lysates were separated by 2‐DE in a single gel and the three spot patterns relatively quantified.     

Identification of selenium-containing proteins in selenium-rich yeast aqueous extract by 2D gel electrophoresis, nanoHPLC-ICP MS and nanoHPLC-ESI MS/MS

An approach based on the consecutive use of nanoHPLC-ICP collision cell MS and nanoHPLC-electrospray MS was proposed for the analysis of water-soluble selenium-containing proteins in selenium-rich yeast after their separation by 2D gel electrophoresis (GE). An ultrasonic probe was employed for fast protein extraction avoiding sample heating and thus reducing the risk of protein degradation. The efficiency of different extraction steps were critically evaluated by total selenium analysis and size-exclusion chromatography (SEC)-ICP MS. Prior to electrophoresis proteins were purified by acetone precipitation. The protein-containing spots from 2D GE were excised and digested with trypsin. The digests obtained were analyzed by nanoHPLC-ICP MS in order to check for the presence of selenium-containing peptides; this allowed the detection of target proteins for further analyses (two out of five spots). The subsequent analyses of the selected digests by nanoHPLC-ES MS/MS allowed the attribution of amino acid sequences to peaks detected by ICP MS revealing the presence of two selenium-containing proteins: SIP 18 and HSP 12.