Electrochemical Initiated C‐N Coupling of 3‐Methylcatechol and n‐Hexylamine in a Flow Cell Monitored with ESI‐MS

The electrochemical initiated heterocoupling of 3‐methylcatechol and n‐hexylamine was investigated. The oxidation of 3‐methylcatechol was performed in an electrochemical flow cell with glassy carbon as the working electrode. As a result, the two‐electron, two‐proton oxidised chinone intermediate undergoes a C‐N coupling reaction in the presence of an amine (Michael addition). This mono coupling product can undergo a second two‐electron, two‐proton oxidation depending on acidic or basic conditions and substrate ratios. This flow cell was coupled on‐line with electrospray ionisation mass spectrometry to identify the possible coupling products. Higher substrate concentrations were performed off‐line as first scale‐up experiments in a two‐step procedure.     

Study of the reaction products of flavonols with 2,2-diphenyl-1-picrylhydrazyl using liquid chromatography coupled with negative electrospray ionization tandem mass spectrometry

The products obtained after the reaction between flavonols and the stable free radical 2,2-diphenyl-1-picrylhydrazyl (DPPH(*)) in both methanol and acetonitrile were characterized using liquid chromatography coupled with negative electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) and NMR spectroscopy. The flavonols studied were quercetin, kaempferol and myricetin. In methanol, two reaction products of oxidized quercetin were identified using LC/ESI-MS/MS and NMR. Quercetin was oxidized through a transfer of two H-atoms to DPPH(*) and subsequently incorporated either two CH(3)OH molecules or one CH(3)OH- and one H(2)O molecule giving the products 2-(3,4-dihydroxyphenyl)-3,5,7-trihydroxy-2,3-dimethoxy-2,3-dihydrochromen-4-one and 2-(3,4-dihydroxyphenyl)-3,3,5,7-tetrahydroxy-2-methoxy-2,3-dihydrochromen-4-one, respectively. LC/ESI-MS/MS analysis revealed that in methanol, kaempferol and myricetin also gave rise to methoxylated oxidation products similar to that identified for quercetin. Kaempferol, in addition, also exhibited products where a kaempferol radical, obtained by a transfer of one H-atom to DPPH(*), reacted with CH(3)OH through the addition of CH(3)O(*), yielding two isomeric products. When the reaction took place in acetonitrile, LC/ESI-MS/MS analysis showed that both quercetin and myricetin formed stable isomeric quinone products obtained by a transfer of two H-atoms to DPPH(*). In contrast, kaempferol formed two isomeric products where a kaempferol radical reacted with H(2)O through the addition of OH(*), i.e. similar to the reaction of kaempferol radicals with CH(3)OH.     

Electrochemical Oxidation of Quercetin

The mechanism of electrochemical oxidation of quercetin on a glassy carbon electrode has been studied using cyclic, differential pulse and square‐wave voltammetry at different pH. It proceeds in a cascade mechanism, related with the two catechol hydroxyl groups and the other three hydroxyl groups which all present electroactivity, and the oxidation is pH dependent. Quercetin also adsorbs strongly on the electrode surface; and the final oxidation product is not electroactive and blocks the electrode surface. The oxidation of the catechol 3′,4′‐dihydroxyl electron‐donating groups, occurs first, at very low positive potentials, and is a two electron two proton reversible reaction. The hydroxyl group oxidized next was shown to undergo an irreversible oxidation reaction, and this hydroxyl group can form a intermolecular hydrogen bond with the neighboring oxygen. The other two hydroxyl groups also have an electron donating effect and their oxidation is reversible.     

新型的钛基Ni-Sn/Ti电极的制备及对甲醇氧化反应的电催化活性

利用电热法,一步制备出新型的钛基Ni-Sn/Ti电极(Ni8Sn/Ti, Ni7Sn3/Ti 和 Ni/Ti)。扫描电镜（SEM）图像表明,催化剂以片状的纳米颗粒形式沉积于钛基体上。利用电化学伏安技术、电位阶跃法和电化学交流阻抗谱（EIS）,研究了这些电极在1mol.L�1NaOH溶液中对甲醇氧化反应的电催化活性。研究表明,与Ni7Sn3/Ti,Ni/Ti以及多晶镍电极相比,Ni8Sn/Ti电极对甲醇氧化反应表现出更高的阳极氧化电流和更低的起始电位。EIS分析表明,在本文所考察的阳极电位和甲醇浓度下,Ni8Sn/Ti电极对甲醇氧化反应显示出极低的电荷传递电阻。结果表明,这种新型的钛基Ni8Sn/Ti电极对甲醇氧化反应具有极高的电催化活性。     

Electrochemical Oxidation of Rutin

An electrochemical investigation of rutin oxidation on a glassy carbon electrode was carried out using cyclic voltammetry, differential pulse voltammetry and square‐wave voltammetry over a wide pH interval. The electrochemical oxidation is a complex process, which proceeds in a cascade mechanism, related with the 4‐hydroxyl groups of the rutin molecule. The catechol 3′,4′‐dihydroxyl group is the first to be oxidized by a two‐electron – two‐proton reversible oxidation reaction, followed by an irreversible oxidation reaction due to the 5,7‐dihydroxyl group. Both mechanisms are pH dependent. An adsorption process is also observed and the oxidation products block the electrode surface.     

Electrochemical degradation of quercetin: Isolation and structural elucidation of the degradation products

This paper reports the first complete isolation, characterization and structural elucidation of 18 intermediates following the electrochemical oxidation of quercetin and provides a mechanism of reaction. Bulk electrolysis was employed to induce the oxidation of quercetin in ethanol–PBS buffered neutral solution (1:1, v/v, pH 7.40). Simultaneous UV–Vis, cyclic and differential pulse voltammetric studies indicated the formation of new products due to the induced electrochemical oxidation of quercetin. Preparative separation and the verification of the oxidized products were achieved using a combination of column chromatography, GC–MS and LC–MS–MS analyses. A possible mechanism for the degradation pathways of quercetin was proposed including an electrochemical step leading to the formation of semi-quinone, ortho-quinone and quinone methide, as well as a chemical step corresponding to the formation of complex degradation products of taxifolin, depside, small phenolic acids, quercetin–ethanol adduct, benzofuronone and dimer.     

杨梅酮的电化学和光谱性质研究

应用循环伏安和紫外光谱法研究杨梅酮氧化还原性质及其稳定性.结果表明:在B-R缓冲溶液中玻碳电极上,杨梅酮的氧化还原表现为两步氧化反应和两步还原反应.氧化反应对应于B环4-′OH和C环3-OH的氧化,还原反应对应于C环4位羰基还原为中间体自由基之后再进一步还原生成羟基.以上各步反应均为单电子单质子电极过程.杨梅酮的氧化还原反应与溶液pH关系密切,但其原因来自于去质子化作用,并导致它的抗氧化能力增强,但其最终氧化产物没有电化学活性,并吸附在电极表面,阻碍了电极过程电子传递.在pH 7.45~12.00范围内,杨梅酮也因去质子化作用导致紫外光谱Ⅰ带和Ⅱ带随pH增加,而发生红移,分解作用加剧.同时分解作用还与放置时间有关.     

Investigation of Electrochemical Oxidation of Methanol at a Carbon Paste Electrode Modified with Ni(II)‐BS Complex and Reduced Graphene Oxide Nano Sheets

In the present research, the electro oxidation of methanol was investigated by different electrochemical methods at a carbon paste electrode (CPE) modified with bis(salicylaldehyde)‐nickel(II)‐dihydrate complex (Ni(II)‐BS) and reduced graphene oxide (RGO) (which named Ni(II)‐BS/RGO/CPE) in an alkaline solution. This modified electrode showed very efficient activity for oxidation of methanol. It was found that methanol was oxidized by NiOOH groups generated by further electrochemical oxidation of nickel (II) hydroxide on the surface of the modified electrode. The rate constant and electron transfer coefficient were calculated to be 2.18 s^?1 and 0.4, respectively. The anodic peak currents revealed a linear dependency with the square root of scan rate. This behaviour is the characteristic of a diffusion controlled process, so the diffusion coefficient of methanol was found to be 1.16×10^?5 cm² s^?1 and the number of transferred electron was calculated to be 1. Moreover, differential pulse voltammetry (DPV) investigations showed that the peak current values were proportional to the concentration of methanol in two linear ranges. The obtained linear ranges were from 0.5 to 100.0 µM (R²=0.991) and 400.0 to 1300.0 µM (R²=0.992), and the detection limit was found to be 0.19 µM for methanol determination. Generally, the Ni(II)‐BS/RGO/CPE sensor was used for determination of methanol in an industrial ethanol solution containing 4.0 % methanol.     

Investigation of Methanol Behavior at the Designed Electrochemical Sensor based on Ni(II) Complex and Graphene Nanosheets

In this work, the electrochemical oxidation of methanol was investigated by different electrochemical methods at a carbon paste electrode (CPE) modified with (N‐5‐methoxysalicylaldehyde, N´‐2‐hydroxyacetophenon‐1, 2 phenylenediimino nickel(II) complex (Ni(II)–MHP) and reduced graphene oxide (RGO), which is named Ni(II)‐MHP/RGO/CPE, in an alkaline solution. This modified electrode was found to be efficient for the oxidation of methanol. It was found that methanol was oxidized by the NiOOH groups generated by further electrochemical oxidation of nickel(II) hydroxide on the surface of the modified electrode. Under optimum conditions, some parameters of the analyte (MeOH), such as the electron transfer coefficient (α), the electron transfer rate constant) k_s), and the diffusion coefficient of species in a 0.1 M solution (pH = 13), were determined. The designed sensor showed a linear dynamic range of 2.0–100.0 and 100.0–1000.0 μM and a detection limit of 0.68 μM for MeOH determination. The Ni(II)‐MHP/RGO/CPE sensor was used in the determination of MeOH in a real sample.     

Electrocatalytic oxidation of methanol onto platinum particles decorated nanostructured poly (1,5-diaminonaphthalene) film

In this work, platinum particles decorated nanostructured poly (1,5-diaminonaphthalene) modified glassy carbon electrode (Pt/Nano-PDAN/MGCE) is prepared. The composite catalysts are characterized by scanning electron microscopy, energy dispersive spectroscopy, and electrochemical methods. The electrochemical methanol oxidation reaction is studied at the surface of this modified electrode. At same Pt loading, the Pt/Nano-PDAN/MGCE can act as higher efficient catalyst for methanol oxidation than that Pt/MGCE. Then, the influence of some parameters such as potential scan rates, switching potential, and methanol concentration on its oxidation as well as long-term stability of the modified electrode have studied by electrochemical methods. Also, ability of the modified electrode toward electrocatalytic oxidation of formaldehyde as an intermediate in methanol oxidation has been investigated.     

A new electrocatalytic mechanism for the oxidation of phenols at platinum electrodes

Electrochemical oxidation of phenolic compounds generally produces unstable phenoxy radicals that readily polymerize to passivate the surface of solid electrodes. In this study, the electrocatalytic oxidation of phenol in the presence and absence of methanol was investigated by cyclic voltammetry on a platinum electrode. The cyclic voltammogram of phenol in a mixture of phosphate buffer/methanol solution showed well-defined peaks at ∼600 mV vs. Ag/AgCl reference electrode, which surprising, gradually increased with repetitive scanning, stabilizing after 50 cycles. This unexpected behavior is in contrast to previous studies involving phenolic compounds, which always show a decrease in intensity during continuous potential scanning. Scanning electrochemical spectroscopy (SEM) was further used to investigate the changes in the surface morphology of the Pt electrode after electrodeposition. A new electrocatalytic mechanism for phenol oxidation on the surface of a Pt electrode is suggested in the presence of methanol. The proposed mechanism is based on the formation of a film of Pt oxide/hydroxides onto which the phenol and the products of its electrochemical oxidation are further deposited. The mechanism was also studied using more complex phenolic compounds including resveratrol, quercetin and bisphenol A. The results emphasized the effect of aryl substituents on the electrochemistry of this particular class of compounds.     

球型Pt微粒电极的构建及其对甲醇电氧化的研究

以镍铬合金为基体,在其表面电化学沉积制备了Pt微粒电极,用扫描电子显微镜（SEM）对电极的表面形貌进行了表征,电化学方法考察了电极的电化学性能和甲醇在该电极上的电催化行为．结果表明镍铬合金表面沉积的球型Pt微粒电极对甲醇的电氧化具有良好的催化活性,相同实验条件下,该电极的催化活性比纯Pt电极高30倍．该电极对甲醇的电氧化显示出较高的催化性能．     

Hydrothermal Syntheses of NiO−GO Nanocomposite on 3D Nickel Foam as a Support for Pt Nanoparticles and its Superior Electrocatalytic Activity towards Methanol Oxidation

In this project, Pt/NiO?GO nanocatalyst is grown on nickel foam (NF) and, its catalytic activity towards electrochemical oxidation of methanol in acidic media is studied. The first step is devoted to the synthesis of NiO?GO support by a hydrothermal method. Then Pt nanoparticles (～34.3 nm) are electrodeposited on this supporting material. Hydrothermal and electrochemical deposition conditions are optimized. Surface of modified NF was inspected for physical characterization and Chemical composition by some techniques such as field emission scanning electron microscopy (FESEM), energy‐dispersive X‐ray spectra (EDS), and X‐ray diffraction (XRD). In the electrochemical section, the catalytic performance of Pt/NiO?GO/NF towards methanol oxidation is investigated by cyclic voltammetry and chronoamperometry measurements. The electrochemical impedance spectroscopy (EIS) is elected to deliberate charge transfer resistance on the catalyst surface. Mass activity, electrochemical surface area (ECSA) and durability of prepared catalysts are compared with commercial Pt/C. Deliberations prove the superiority of Pt/NiO?GO/NF towards methanol oxidation in acidic media. The Superior quality of synthesized nanocatalyst that is attributed to the synergetic effect of the NiO?GO support material and Pt nanoparticles, indicate that Pt/NiO?GO/NF can be successfully used as the anode in the direct methanol fuel cell (DMFC).     

Redox Mechanisms of Nodularin and Chemically Degraded Nodularin

The electrochemical behaviour of Nodularin (NOD), a hepatotoxic cyclic pentapeptide, was studied at a glassy carbon electrode. NOD electrochemical oxidation is an irreversible, pH‐independent process, involving the transfer of one electron. Upon incubation in different pH electrolytes, chemical degradation of NOD was electrochemically detected by the appearance of a new oxidation peak. The chemically degraded NOD (cdNOD), undergoes an irreversible, pH‐dependent oxidation, and its redox products are reversibly oxidised. The charge transfer properties of cdNOD as well as of its redox metabolites were investigated. Mechanisms for NOD oxidation, NOD chemical degradation and oxidation of cdNOD and its metabolites were proposed.     

Electrochemical Behavior of Some Thiotriazoles in Aqueous‐Alcoholic Media at GCE

An electrochemical study related to the electrooxidation of 4‐amino‐3‐thio‐5‐methyl‐1,2,4‐triazole (I), 4‐amino‐3‐thio‐5‐phenyl‐1,2,4‐triazole (II) and 3‐thio‐5‐phenyl‐1,2,4‐triazole (III), in 10% v/v methanol‐acetate buffer pH 4.6 has been performed. A variety of electrochemical techniques such as differential pulse voltammetry, cyclic voltammetry, double‐potential step chronoamperometry, rotating‐disk electrode voltammetry and coulometry, were employed to clarify that the mechanism of the electrode process follows the oxidation of thiol compounds. All the compounds exhibit similar redox behavior under the given conditions. They display one irreversible oxidation peak, which is diffusion controlled. From the plot of current function in cyclic voltammetry and the ratio of i_c/i_a less than one in double‐potential step chronoamperometry, it was established that these compounds undergo an one electron oxidation followed by a dimerization process involving the formation of disulfide derivative (EC mechanism). The pK_a values were obtained by the dependence of limiting current and potential with in the wide pH interval. The transfer coefficients, the diffusion coefficients and rate constant of coupled chemical reaction were also reported. The substituent effects were also investigated.     

A Selective Voltammetric Method for Detecting Dopamine at Quercetin Modified Electrode Incorporating Graphene

The development of a quercetin‐graphene composite‐modified glassy carbon electrode (Qu/GH/GCE) for the selective and sensitive detection of dopamine (DA) is described in this paper. To fabricate the Qu/GH/GCE, graphene (GH) was first coated onto the surface of a glassy carbon electrode (GCE) and then quercetin (Qu) was electrodeposited on the GH matrix. Transmission electron microscopy (TEM) was used to characterize the morphology of the obtained GH and Qu/GH, and the electrochemical properties of the modified electrode were studied using electrochemical techniques. The as‐prepared Qu/GH/GCE occupied a synthetic property between GH and Qu. The common overlapped electrochemical oxidation peaks of DA and AA were completely separated and a remarkable increasing electron‐oxidation current of DA occurred on the Qu/GH/GCE, which enabled the sensitive and selective electrochemical detection of DA in the presence of ascorbic acid (AA) with peak difference of ca. 452 mV between DA and AA. The peak current obtained at 0.174 V (vs. saturated calomel electrode, SCE) from differential pulse voltammetry (DPV) is linearly dependent on the DA concentration in the range from 3.0×10^?8 to 4.0×10^?4 mol/L with a detection limit of 1.0×10^?8 mol/L. Furthermore, the Qu/GH/GCE exhibits good reproducibility and stability, and has been used for the determination of DA in samples of rat’s striatum tissue with satisfactory results.     

Electrochemical Detection of Guanine‐methylation Using Glassy Carbon Electrode

This work presents a study of the electrochemical oxidation of 7‐methylguanine (7‐mGua) in aqueous solution at glassy carbon electrode by cyclic voltammetry, differential pulse voltammetry, square wave voltammetry and electrochemical impedance spectrometry. The anodic behaviour of 7‐mGua was compared with the electro‐oxidation of guanine and 7‐methylguanosine. The results demonstrated that the methyl and ribose groups are not electroactive but strongly influence the oxidation mechanism of these species. The oxidation of 7‐mGua occurred in a single pH‐dependent step, with the withdrawal of two electrons and two protons of C8, to form 8‐oxo‐7‐methylguanine, while the electro‐oxidation of 7‐methylguanosine also occurred in a single pH‐dependent step, however, with the withdrawal of one electron and one proton of C8 to form a hydroxylated product, since its oxidation to 8‐oxo‐7‐methylguanosine is hindered by the presence of the pendant groups. In addition, the oxidation of 7‐mGua was investigated in the presence of DNA and DNA‐bases, leading to the conclusion that the formation of 7‐mGua, from an interaction of DNA with an alkylating agent, would cause an increase on the deoxyguanosine peak current of the DNA‐biosensor, with no interference of any free DNA bases, which demonstrated that DNA‐electrochemical biosensors find application on detecting DNA methylation, opening a new avenue for applications of DNA biosensors.     

Nickel modified ionic liquid/carbon paste electrode for highly efficient electrocatalytic oxidation of methanol in alkaline medium

In this study, the electrocatalytic oxidation of methanol at nickel modified ionic liquid/carbon paste electrode (Ni/IL/CPE) in alkaline medium is presented. The ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, is incorporated into the electrode as a binder. Electrochemical impedance spectroscopy is employed to evaluate the electron transfer rate of this electrode. Ni(II) ions are incorporated into the electrode by immersion of this electrode in 1.0?M nickel sulfate solution. Cyclic voltammetry and chronoamperometry techniques are used for the electrochemical study of this modified electrode in the absence and the presence of methanol. The effect of methanol concentration on the anodic peak current shows an increase in the anodic peak current up to 1.25?M. Current density of Ni/IL/CPE for methanol oxidation in alkaline media is investigated by comparison with some of the previously reported electrodes. Results show that this electrode exhibits a high efficient electrocatalytic activity toward the oxidation of methanol with the current density of 17.6?mA?cm^?2. The rate constant for chemical reaction between methanol and redox sites of electrode is calculated. This new proposed electrode is simple and efficient enough, and it can be widely used as anode in direct methanol fuel cell.     

Comparison of Electrochemical Oxidation of Flavonols and Calculated Proton Affinity and Electron Transfer Enthalpy in Water

Flavonols, a class of flavonoids, are present in flowers, fruits and vegetables. They are jointly responsible for antioxidant activity as free radical acceptors. The redox behaviour of myricetin, quercetin, isorhamnetin, fisetin, morin and kaempferol is investigated using cyclic and differential pulse voltammetry. Quantum chemical calculations of proton affinities and electron transfer enthalpies were performed to identify possible reactive sites and radical species to compare them with measured oxidation potentials of the flavonols. Regarding to their chemical structure, these flavonols showed an oxidation order: myricetin > quercetin > isorhamnetin > fisetin > morin > kaempferol.     

杂多酸修饰的电极对于甲醇电氧化的促进作用

采用杂多酸修饰光滑铂电极,研究其对甲醇电催化氧化的作用,发现与未修饰光滑铂电极相比,分别经磷钨酸和硅钨酸修饰的电极上甲醇电催化氧化速率明显增加.