New ferrocenyl-chalcones and bichalcones: Synthesis and characterization

Ferrocenyl-chalcones and their bichalcone analogues were characterized by IR and NMR spectroscopy, as well as electrochemically. Their UV–visible spectra were recorded, and the electronic transitions were assigned by time-dependent DFT calculations. The single-crystal X-ray structures were determined for two ferrocenyl bichalcones.     

Preparation and properties of polyamides from 4-phenoxy- and 4-phenylthio-m-phenylenediamine and both aromatic and aliphatic diacids

New soluble aramids having pendant phenoxy and phenylthio groups were prepared in high molecular weights by the polycondensation of aromatic diacids with 4-phenoxy-m-phenylenediamine and 4-phenylthio-m-phenylenediamine, respectively. Glass transition temperatures (T_g) of these aramids were in the range 195–255°C, where T_gs of phenoxy pendant aramids were higher than those of phenylthio substituted aramids. These properties were compared with those of the parent aramids derived from m-phenylenediamine and aromatic diacids. Aromatic-aliphatic polyamides were also prepared by the reaction of these three diamines with aliphatic diacids having 4–10 methylene groups and were characterized in detail.     

Concentrations and distributions of trace and minor elements in Chinese and Canadian coals and ashes

A total of 35 trace and minor elements including some of environmental significance were determined in each of a selection of 15 Chinese and 6 Canadian thermal coals and their ashes by using the SLOWPOKE-2 nuclear reactor facility of the University of Toronto. The concentrations and distributions of these constituents among the coals and their combustion products (viz. ash and volatile matter) are presented together with an interpretation of their significance in relation to the large scale combustion of these coals as thermal fuels in industrialized countries such as China and Canada. The detailed results showed wide variations in trace impurity concentrations (up to a factor of 100 and more) among the coals studied with few large differences between those of Chinese and Canadian origin except that the rare earths, Sc, Th, U, I, and Se were much higher in the former, other halogens, As and Na were lower. Values for elemental enrichment factors (EF) relative to normal crustal abundances indicated that only As(EF=13), Br(5.7), I(16), S(230), Sb(11) and Se(320) were appreciably enriched in coal. During static ashing at 750°C most of the halogens, S and Se were volatilized whereas most other inorganic constituents were highly retained and concentrated in the ash by factors of 6 to 11.     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

桑黄黄酮A和B的分离与合成

利用正相硅胶柱色谱，Sephadex LH-20柱色谱以及反相HPLC等手段从真菌桑黄 中分离得到两个新的二氢黄酮衍生物，经1D NMR，2D NMR和MS等光谱方法鉴定其结 构分别为5，7，4'－三羟基－6－邻羟苄基二氢黄酮和5，7，4'-三羟基－8－邻羟 苄基二氢黄酮，并且对它们进行了合成。     

Synthesis and Certain Reactions of Primary Carboranyl Acetates and Tosylates

Acetates and tosylates of primary carboranyl alcohols were prepared, and their reactions with nucleophilic reagents were investigated. Some specific features of these processes were revealed, and preparative procedures for previously unknown carboranyl amines were developed.     

三氯环硼氮烷和聚硼氮烷的合成与表征

以三氯化硼和氯化铵为原料,甲苯为溶剂,高产率(98%)地合成了具有硼和氮的六元环结构的三氯环硼氮烷(1);1分别与正丙胺(Ⅰ)和异丙胺(Ⅱ)反应制得正丙胺基环硼氮烷(1~Ⅰ)和异丙胺基环硼氮烷(1~Ⅱ);1~Ⅰ和1~Ⅱ经过脱胺和热聚合反应制得聚硼氮烷先驱体(2和3).用IR,NMR和XRD等对2和3的组成与结构进行了分析,探讨了聚硼氮烷的胺基取代基对聚硼氮烷聚合反应性及产物结构的影响.研究结果表明,3具有更强的热聚合特性.     

南瓜籽烘烤前后化学成分的分析

对烘烤前后南瓜籽中的化学成分进行分析并对比。采用同时蒸馏萃取装置萃取南瓜籽中的挥发性成分,采取超临界CO2萃取技术萃取南瓜籽油脂,并将其分为酸、碱、中性三个部分,用气相色谱-质谱联用方法分析其中化学成分并进行对比。结果表明,南瓜籽挥发性成分中含有多种醛类和酯类化合物,烘烤后产生了大量的烷基吡嗪,其在碱性部分中的相对含量比烘烤前提高14倍多,不饱和醛类化合物含量也有明显提高。南瓜籽油脂中的主要化学成分是油酸、亚油酸及其酯类。还含有生物活性功能成分如植物甾醇、角鲨烯和维生素E等。烘烤后除角鲨烯含量有所降低,维生素E、植物甾醇、亚麻酸等均有提高。     

酞菁锶及其磺化衍生物的合成与性质研究

合成了酞菁锶及其磺化衍生物,经元素分析、电子光谱与红外光谱等方法确定酞菁锶和磺化酞菁锶的组成分别为SrPc和SrPcS_x(x=2,3),测定了它们的溶解性及光电性质.     

Separation and quantification of paraquat and diquat in serum and urine by capillary electrophoresis

The use of capillary electrophoresis (CE) for simultaneous qualitative and quantitative detection of paraquat (PQ) and diquat (DQ) in both serum and urine was investigated. The two herbicides were extracted from biological fluids with liquefied phenol. Serum required a deproteinization with chloroform and ammonium sulfate as pretreatment. The extracts were hydrodynamically injected and the complete separation was carried out in 10 min, using a capillary tube (75 microm i.d., 500 mm) of fused silica containing 50 mM phosphate buffer (pH 2.50) as the carrier. UV absorbance detection at 200 nm was performed by an on-column detector. The analytes were characterized by their respective migration times. Analytical recoveries were 52.6% for PQ and 62.6% for DQ in serum, and 71.4% and 59.3%, respectively, in urine. The linearity was studied up to 4 mg/L and the limits of detection (LODs) were better than 5 pg/mL in serum or urine. The CE method described was applied to the characterization of two lethal poisonings and results were related.     

Chemical Composition and Lignins of Tomato and Pomegranate Seeds

Tomato and pomegranate seeds were analyzed quantitatively. Lignin hydrochloride was isolated from their seeds and characterized. Lignocarbohydrate complexes were isolated by base hydrolysis. Their elemental composition, IR spectra, and molecular weights were determined.     

Synthesis and characterization of two new cyclobutyl and aryl hydroxyethyl methacrylate monomers and their polymers

Two new hydroxyethyl methacrylates having aryl and cyclobutane rings were synthesized by addition to 1-(epoxyethyl)-3-aryl-3-methylcyclobutane to methacrylic acid. The monomers prepared are 2-(3-methyl-3-phenylcyclobutyl)-2-hydroxyethyl methacrylate (PCHEMA) and 2-(3-methyl-3-mesitylcyclobutyl)-2-hydroxyethyl methacrylate (MCHEMA). Both monomers were polymerized at 60°C in 1,4-dioxane solution using benzoyl peroxide as initiator. Poly(PCHEMA) and poly(MCHEMA) and their monomers were characterized by FT-IR and ¹H- and ¹³C-NMR techniques. Weight average molecular weights of the polymers were determined for poly(PCHEMA) poly(MCHEMA) by gel permation chromatography. Thermal stabilities of the polymers were essentially the same. Glass transition temperatures for poly(PCHEMA) and poly(MCHEMA) were determined as 105 and 137°C, respectively. No changes of the polymers by irradiation with UV light at 254 nm were observed. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2123–2128, 1997     

Synthesis and Properties of Trimethylphenoxy- and Tetramethylphenoxy-Silanes

Twelve new Trimethylphenoxy- and Tetramethylphenoxy-silanes were synthesized and all were proved to be stable toward hydrolysis. The substituent effect of methyl groups on the stability of Si-O-Ar toward hydrolysis is also discussed.     

Preparation and properties of polyimides and polyamide-imides from diisocyanates

Polyimides of different structures were synthesized by reaction of 1,4-phenylene diisocyanate (PPDI) and 1,5-naphthalene diisocyanate (NDI) with pyromellitic dianhydride (PMDA) and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA). Polyamide-imides were also prepared by reaction of PPDI and NDI with trimellitic anhydride. The optimized condition for polymerization reactions were obtained via the study of model compounds. All polymers and model compounds were characterized by conventional methods. Physical properties of polymers, including thermal behavior, thermal stability, solution viscosity, and solubility behavior, were also studied. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2245–2250, 1999     

Nitraza-/Oxa-Propylene- and Hydrazonemethylene-Bridged 1,2,4-Nitraminotriazoles and Selected Salts

Two new bridged nitraminotriazoles with bridging oxapropylene and nitrazapropylene moieties were synthesized, and converted into several salts, as well as from the hydrazonemethylene bridged nitraminotriazole. All compounds were fully characterized by NMR and IR spectroscopy, elemental analysis as well as differential thermal analysis. The sensitivity towards friction and impact were determined according to BAM standard technics and the energetic properties were calculated by using the EXPLO5 computer code. The neutral compounds as well as the various salts were examined in terms of their physicochemical properties and detonation performance to each other and compared to the commonly used secondary explosive RDX.     

Synthesis and thiolation of 1,3-difluoro-2,4,6-trihaloanilines and benzenes

Three pentahaloanilines were prepared by stepwise halogenation of 3,5-difluoroaniline and were deaminated to form pentahalobenzenes. Alternatively, two pentahalobenzenes were obtained by lithiation followed by iodination of 1,3-difluoro-4,6-dihalobenzenes. Alkylthiolation reactions of pentahaloanilines and benzenes in Me₂SO were investigated.     

Conformation and stereodynamics of 1,2-diaryltetrahydropyrimidine and of its five- and seven-membered ring analogs

The 1-(2-nitrophenyl)-2-(2-methylphenyl)-1,4,5,6-tetrahydropyrimidine and its five- and seven-membered ring analogs were synthesized and their conformational properties investigated by low temperature NMR spectroscopy and DFT theoretical calculations. Restricted rotation of the aryl substituents were observed in all cases and the corresponding barriers determined. In the case of the six-membered ring derivative the additional conformers resulting from a ring inversion process were also detected.     

Kinetics and thermodynamics of the adsorption of some dyestuffs and p-nitrophenol by chitosan and MCM-chitosan from aqueous solution

The effect of initial concentration, temperature, and shaking rate on the adsorption of three dyestuffs [orange II (O-II), crystal violet (CV), and reactive blue 5 (RB5)] and an ideal adsorbate, p-nitrophenol (PNP), by chitosan (Sigma C-3646) and the effect of temperature on the adsorption of O-II and CV by monocarboxymethylated chitosan (MCM-chitosan) were investigated. Kinetic data obtained for the adsorption of each dyestuff and PNP by chitosan and of O-II and CV by MCM-chitosan at different temperatures were applied to the Lagergren equation, and adsorption rate constants (k(ads)) at these temperatures were determined. These rate constants related to the adsorption of O-II and RB5 by chitosan and of O-II by MCM-chitosan were applied to the Arrhenius equation, and activation energies (E(a)) were determined. In addition, the isotherms for adsorption, at different temperatures, of each dyestuff and PNP by chitosan and of O-II and CV by MCM-chitosan were also determined. These isothermal data were applied to linear forms of isotherm equations that they fit, and isotherm constants were calculated. Because the isotherm curves obtained for the adsorption of O-II and CV by chitosan and of CV by MCM-chitosan fit the Langmuir adsorption isotherm, b constants were applied to thermodynamic equations, and thermodynamic parameters (delta G, delta H, and delta S) were calculated. Lastly, chitosan and MCM-chitosan were compared with respect to the ability to take up the dyestuffs and PNP.     

Homopolymers and copolymers of acrylates and methacrylates of homoterpenylmethyl carbinol and α-campholenol

Acrylates and methacrylates of homoterpenylmethyl carbinol and α-campholenol were homopolymerized. Copolymers with each other and acrylonitrile were studied. Terpolymers of the acrylate of homoterpenylmethyl carbinol and the acrylate of α-campholenol with butadiene and styrene or acrylonitrile were also prepared. The lactone ring in the homopolymer of methacrylate of homoterpenylmethyl carbinol was opened up under basic conditions at room temperature, yielding a water-soluble polymer. Films of this polymer were cast from a water solution. The acrylate of homoterpenylmethyl carbinol gave a high molecular weight copolymer with acrylonitrile which could be molded into a transparent, extremely tough, film. The terpolymers of the acrylate of homoterpenylmethyl carbinol with butadiene and styrene or acrylonitrile were obtained in high yield and could be molded into strong, rubbery films. Several polymers were epoxidized and cured with p-phenylenediamine.     

Synthesis and properties of polyurethanes derived from bis-N-hydroxyimides and diisocyanates

Polyurethanes were synthesized by polyaddition reaction of bis-N-hydroxyimides and diisocyanates. The reactions were carried out in an aprotic polar solvent such as dimethylacetamide or N-methyl-2-pyrrolidone, and the polymers with inherent viscosities of up to 1.32 dl/g were obtained. These polyurethanes were found to exhibit high reactivity toward nucleophiles such as water and amines, which brought about rapid reduction of viscosity. The stabilities against heat and exposure to sunlight were also studied.