A computer simulation study of ionic conductivity in polymer electrolytes

In this paper we present a computer simulation study of ionic conductivity in solid polymeric electrolytes. The multiphase nature of the material is taken into account. The polymer is represented by a regular lattice whose sites represent either crystalline or amorphous regions with the charge carrier performing a random walk. Different waiting times are assigned to sites corresponding to the different phases. A random walk (RW) is used to calculate the conductivity through the Nernst-Einstein relation. Our walk algorithm takes into account the reorganization of the different phases over time scales comparable to time scales for the conduction process. This is a characteristic feature of the polymer network. The qualitative nature of the variation of conductivity with salt concentration agrees with the experimental values for PEO-NH₄I and PEO-NH₄SCN. The average jump distance estimated from our work is consistent with the reported bond lengths for such polymers.     

Spectroscopic studies of triflate ion association in polymer gel electrolytes and their constituents

Raman and NMR spectroscopy have been used to investigate the state of ion association in systems comprising salt, polymer and/or solvent. The dissolved salt in each case was lithium triflate (lithium trifluoromethane sulphonate). Five systems were studied, comprising polymer gel electrolytes or constituents of such electrolytes. These were: salted (a) N,N'-dimethyl formamide (DMF), (b) tetraethylene glycol dimethylether (tetraglyme), (c) polyethylene glycol (PEG), (d) end-esterified PEG and (e) poly(vinylidene fluoride) (PVDF) gels containing either DMF or tetraglyme. Raman results give a broad indication of the significance of end-group, solvent and polymer choice in triflate-salted systems. In all cases, anion association rises with temperature, often with a significant increase in ion aggregation. The reliability of these results is supported by an analysis of systematic errors incident in this technique for ion association measurements. A limited comparison performed on the system having the highest concentration of ion aggregates (end-esterified PEG) suggests that Raman and NMR spectroscopy provide different information concerning ion association. Reasons for the difference are discussed, concluding that complementary information is obtained owing to the different time constants relevant to the two techniques and to the dependence of the Raman results on molecular proximity.     

Effect of molecular weight on conductivity of polymer electrolytes

The ionic conductivity, σ, of mixtures of poly(ethylene oxide) (PEO) and lithium bis(trifluoromethanesulfone)imide (LiTFSI) was measured as a function of molecular weight of the PEO chains, M, over the range 0.2-5000 kg/mol. Our data are consistent with an expression σ = σ₀ + K/M proposed by Shi and Vincent [Solid State Ionics 60 (1993)] where σ₀ and K are exponential and linear functions of inverse temperature respectively. Explicit expressions for σ₀ and K are provided.     

A study on LiBOB-based nanocomposite gel polymer electrolytes (NCGPE) for Lithium-ion batteries

Lithium bis(oxalato)borate (LiBOB) salt-based nanocomposite gel polymer blend electrolyte (PVdF/PVC) membranes have been prepared by solution casting technique for various concentrations of TiO₂. The effect of anatase structure of nanosized titanium dioxide in the plasticized PVC/PVdF + LiBOB matrix has been observed in the 2:1 salt filler ratio in the impedance measurements that the conductivity is increased one order of magnitude higher than the filler-free electrolyte (1:0 salt:filler ratio). The phase morphology of this electrolyte membrane represents the appearance of the free volume sites for ionic migration.     

Ionic conductivity studies of 49% poly(methyl methacrylate)-grafted natural rubber-based solid polymer electrolytes

The potential of 49% poly(methyl methacrylate)-grafted natural rubber (MG49) as a solid polymer electrolyte film in rechargeable batteries system were explored. The flat, thin, and flexible films were prepared by solution casting technique. The ionic conductivity was investigated by alternating current impedance spectroscopy. The highest conductivity of 2.3 × 10⁻⁷ Scm⁻¹ was obtained at 20wt.% of LiBF₄ salts content, while 4.0 × 10⁻⁸ Scm⁻¹ was obtained at 15wt.% LiClO₄ salts loading. The observation on structure performed by X-ray diffraction shows the highest conductivity appears at amorphous phase.     

Role of polyvinyl alcohol in the conductivity behaviour of polyethylene glycol-based composite gel electrolytes

An attempt has been made in the present work to combine gel and composite polymer electrolyte routes together to form a composite polymeric gel electrolyte that is expected to possess high ionic conductivity with good mechanical integrity. Polyethylene glycol (PEG) based composite gel electrolytes using polyvinyl alcohol (PVA) as guest polymer have been synthesized with 1 molar solution of ammonium thiocyanate (NH₄SCN) in dimethyl sulphoxide (DMSO) and electrically characterized. The ionic conductivity measurements indicate that PEG:PVA:NH₄SCN-based composite gel electrolytes are superior (σ _max = 5.7 × 10⁻² S cm⁻¹) to pristine electrolytes (PEG:NH₄SCN system) and conductivity variation with filler concentration remains within an order of magnitude. The observed conductivity maxima have been correlated to PEG:PVA:NH₄SCN-and PVA:NH₄SCN-type complexes. Temperature dependence of conductivity profiles exhibits Arrhenius behaviour in low temperature regime followed by VTF character at higher temperature.      

Effect of branching in base polymer on ionic conductivity in hyperbranched polymer electrolytes

Novel hyperbranched polymer, poly[bis(diethylene glycol)benzoate] capped with a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group (poly-Bz1a), was prepared, and its polymer electrolyte with LiN(CF₃SO₂)₂, poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte, was all evaluated in thermal properties, ionic conductivity, and electrochemical stability window. The poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte exhibited higher ionic conductivity compared with a polymer electrolyte based on poly[bis(diethylene glycol)benzoate] capped with an acetyl group (poly-Ac1a), and the ionic conductivity of poly-Bz1a/LiN(CF₃SO₂)₂ electrolyte was to be 7×10⁻⁴ S cm⁻¹ at 80 °C and 1×10⁻⁶ S cm⁻¹ at 30 °C, respectively. The existence of a 3,5-bis[(3′,6′,9′-trioxodecyl)oxy]benzoyl group as a branching unit present at ends in the base polymer improved significantly ionic conductivity of the hyperbranched polymer electrolytes. The polymer electrolyte exhibited the electrochemical stability window of 4.2 V at 70 °C and was stable until 300 °C.     

Effect of radiation on conductivity of solid PVA–KOH–PC composite polymer electrolytes

The aim of this work is to enhance the room temperature conductivity of solid alkaline composite polymer electrolytes (ACPEs) based on polyvinyl alcohol/potassium hydroxide/propylene carbonate (PVA–KOH–PC) composites by cross-linking the PVA and bond scission of the PC by γ-radiation. The ACPEs were prepared by solvent-casting technique and irradiated with doses up to 200 kGy at room temperature. The microstructure of the ACPEs was measured using XRD spectrometer, and the results show the structural change from semicrystalline to amorphous, indicating that the cross-linking has been achieved at higher doses. It was found that the PKOH composite at 40 wt% KOH and PPC composite at 60 wt% PC show higher conductivities. The conductivity of the PKPC composites is dominated by dc conductivity at higher frequencies and that PC with 60 wt% has the highest conductivity at a dose of 200 kGy.Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6–8, 2005.     

Electrical characterization of nano-composite polymer gel electrolytes containing NH4BF4 and SiO2: role of donor number of solvent and fumed silica

Nano-composite polymer gel electrolytes were synthesized by using polyethylene oxide (PEO), ammonium tetrafluoroborate (NH₄BF₄), fumed silica (SiO₂), dimethylacetamide (DMA), ethylene carbonate (EC), and propylene carbonate (PC) and characterized by conductivity studies. The effect of donor number of solvent on ionic conductivity of polymer gel electrolytes has been studied. The mechanical strength of the gel electrolytes has been increased with the addition of nano-sized fumed silica along with an enhancement in conductivity. Maximum room temperature ionic conductivity of 2.63 × 10⁻³ and 2.92 × 10⁻³ S/cm has been observed for nano-composite gel electrolytes containing 0.1 and 0.5 wt% SiO₂ in DMA+1 M NH₄BF₄+10 wt% PEO, respectively. Nano-composite polymer gel electrolytes having DMA have been found to be thermally and electrically stable over 0 to 90 °C temperature range. Also, the change in conductivity with the passage of time is very small, which may be desirable to make applicable for various smart devices.

     

Effects of plasticizer and nanofiller on the dielectric dispersion and relaxation behaviour of polymer blend based solid polymer electrolytes

Solid polymer electrolytes consisted of poly(ethylene oxide) (PEO) and poly(methyl methacrylate) (PMMA) blend (50:50 wt/wt%) with lithium triflate (LiCF₃SO₃) as a dopant ionic salt at stoichiometric ratio [EO + (CO)]:Li⁺ = 9:1, poly(ethylene glycol) (PEG) as plasticizer (10 wt%) and montmorillonite (MMT) clay as nanofiller (3 wt%) have been prepared by solution cast followed by melt–pressing method. The X–ray diffraction study infers that the (PEO–PMMA)–LiCF₃SO₃ electrolyte is predominantly amorphous, but (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG electrolyte has some PEO crystalline cluster, whereas (PEO–PMMA)–LiCF₃SO₃–10 wt% PEG–3 wt% MMT electrolyte is an amorphous with intercalated and exfoliated MMT structures. The complex dielectric function, ac electrical conductivity, electric modulus and impedance spectra of these electrolytes have been investigated over the frequency range 20 Hz to 1 MHz. These spectra have been analysed in terms of the contribution of electrode polarization phenomenon in the low frequency region and the dynamics of cations coordinated polymer chain segments in the high frequency region, and also their variation on the addition of PEG and MMT in the electrolytes. The temperature dependent dc ionic conductivity, dielectric relaxation time and dielectric strength of the plasticized nanocomposite electrolyte obey the Arrhenius behaviour. The mechanism of ions transportation and the dependence of ionic conductivity on the segmental motion of polymer chain, dielectric strength, and amorphicity of these electrolytes have been explored. The room temperature ionic conductivity values of the electrolytes are found ∼10⁻⁵ S cm⁻¹, confirming their use in preparation of all-solid-state ion conducting devices.     

Ion transport and battery discharge characteristics of polymer electrolyte based on PEO complexed with NaFeF4 salt

Ion-conducting solvent-free solid polymer electrolytes based on polyethylene oxide (PEO) complexed with sodium ferric tetrafluoride (NaFeF₄) were prepared using a solution casting technique. The complexation of the films was investigated through X-ray diffraction and Fourier transform infrared spectroscopic studies. Measurements of DC conductivity in the temperature range 300–370 K and the transference numbers were carried out to investigate the nature of charge transport in the polymer electrolyte system. Transference number data shows that the charge transport in this system is found to be predominantly due to ions. Using these polymer electrolytes, electrochemical cells were fabricated with the configuration of Na/(PEO+NaFeF₄)/(I₂+C+electrolyte). Various cell parameters, such as open circuit voltage, short circuit current, power density, and energy density of the device were evaluated and reported.     

Effect of ZrO2 on the conductivity of PVC-LiAsF6-DBP polymer electrolytes

The preparation and characterization of composite polymer electrolytes PVC-LiAsF₆-DBP for different concentrations of ZrO₂ have been investigated. X-ray and FTIR studies indicate complex formation between the polymer and salt and that the complex remains mainly in the amorphous phase. The electrical conductivity values measured by a.c impedance spectroscopy are found to depend upon the ZrO₂ concentration. The temperature dependence of the conductivity of the polymer films obeys the VTF relation. The conductivity values are presented and the results are discussed.     

Role of the polymer matrix in determining the chemical–physical and electrochemical properties of gel polymer electrolytes for lithium batteries

Gel polymer polymer membranes, prepared by immobilizing lithium-conducting solutions in a polymer matrix, are promising electrolyte materials for promoting the advancement of the lithium battery technology. However, so far, not much attention has been devoted to the definition of the role of the constituents in determining the properties of these electrolytes. In this work we have examined the characteristics of three common examples of polymer electrolytes based on a poly(vinylidene fluoride)-fluoropropylene, poly(vinyilidene fluoride)–hexa-fluoropropylene copolymer matrix. The three selected electrolytes differed from the nature of their polymer matrix. The results, based on X-ray diffraction, differential scanning calorimetry, thermogravimetric analysis, and conductivity tests, show that, indeed, the type of the polymer matrix may influence the properties of the electrolytes, especially in terms of conductivity.     

Star-shaped oligo(ethylene glycol) ethers (OEGE) as a new type of plasticizer for polymer gel electrolytes

Star-shaped oligo(ethylene glycol) methyl ethers (three and four arm molecules of various molecular weights) were synthesized and characterized with regard to viscosity, thermal transitions, ability to solvate the electrolyte LiCF₃SO₃ and the ionic conductivity of their LiCF₃SO₃ solutions in comparison to linear oligo(ethylene glycol) methyl ethers. Polymer gel electrolytes were prepared by photopolymerization of tri(ethylene glycol) dimethacrylate (EG₃DMA) or its copolymerization with the polar comonomer cyanomethyl methacrylate (CyMA) in the presence of the oligo(ethylene glycol) ethers mentioned above and of the electrolyte LiCF₃SO₃. The gels were characterized concerning their thermal transitions, thermo-mechanical properties, their ability to solvate the electrolyte and their ionic conductivity. In comparison to the linear plasticizers the star-shaped ones show a distinctly lower tendency to crystallize, which is even completely suppressed in several cases. Intensified ion association was found in LiCF₃SO₃ solutions of the star-shaped plasticizers, if the number of the ethylene glycol units per arm was lower than 4. Therefore, the conductivity of the solutions and the gels was lower than that with linear plasticizers at room temperature. The modification of the polymer matrix by copolymerization with 20 mol% CyMA resulted in a maximum of the ionic conductivity σ≈1×10⁻⁵ S/cm of gels with star-shaped plasticizers at 25 °C.     

An investigation of the proton conductivities of hydrated poly(vinyl alcohol)/boric acid complex electrolytes

Proton-conducting polymer complex electrolytes were prepared by incorporation of boric acid, H₃BO₃ into poly(vinylalcohol), PVA, to form hydrated PVAxH₃BO₃ where x denotes the number of moles of boric acid per polymer repeat unit. The dried materials were characterized via Fourier transform infrared spectroscopy, thermogravimetry, and X-ray diffraction. The proton conductivity of the hydrated complex electrolytes was measured by AC impedance spectroscopy. PVA2H₃BO₃ with RH ∼25% was found to be optimum composition that exhibited proton conductivity of 1.3 × 10⁻³ S/cm at 80 °C.     

The effects of ceramic fillers on the PMMA-based polymer electrolyte systems

The effects of ceramics fillers on the polymethylmethacrylate (PMMA)-based solid polymer electrolytes have been studied using ac impedance spectroscopy and infrared spectroscopy. The polymer film samples were prepared using solution cast technique, tetrahydrofuran (THF) used as a solvent, and ethylene carbonate (EC) has been used as plasticizer. Lithium triflate salt (LiCF₃SO₃) has been incorporated into the polymer electrolyte systems. Two types of ceramic fillers, i.e., SiO₂ and Al₂O₃, were then implemented into the polymer electrolyte systems. The solutions were stirred for several hours before it is poured into petri dishes for drying under ambient air. After the film has formed, it was transferred into desiccator for further drying before the test. From the observation done by impedance spectroscopy, the room temperature conductivity for the highest conducting film from the (PMMA–EC–LiCF₃SO₃) system is 1.36 × 10⁻⁵ S cm⁻¹. On addition of the SiO₂ filler and Al₂O₃ filler, the conductivity are expected to increase in the order of ∼10⁻⁴ S cm⁻¹. Infrared spectroscopy indicates complexation between the polymer and the plasticizer, the polymer and the salts, the plasticizer and the salts, and the polymer and the fillers. The interactions have been observed in the C=O band, C–O–C band, and the O–CH₃ band. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7-9, 2006.     

A study on the blending effect of polyvinyledene fluoride in the ionic transport mechanism of plasticized polyvinyl chloride + lithium perchlorate gel polymer electrolytes

The gel polymer electrolytes composed of the blend of polyvinylchloride (PVC) and polyvinylidene fluoride (PVdF) as host polymers, the mixture of ethylene carbonate (EC) and propylene carbonate (PC) as a plasticizer, and LiClO₄ as a salt was studied. An attempt was made to investigate the effect of PVdF in the plasticized PVC + LiClO₄ system in three blend ratios. The differential scanning calorimetry study confirms the formation of polymer–salt complex and miscibility of the PVC and PVdF. The X-ray diffraction results of plasticized PVC (S1, S2, S3) and PVdF-blended films (S4, S5, S6) were compared, in that an increase in PVC concentration decreases the degree of crystallinity for S1 and S3, respectively, but drastically increases for PVC (S2). The increase in PVC content has not accounted in the conductivity studies also noted. However, the blending effect of PVdF showed decreases in crystallinity homogeneously for (S6 > S5 > S4), which were reflected in ionic conductivity measurements. The surface morphology of the films were also studied by scanning electron microscope, and it corroborates the same. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Investigations on the effect of complexation of NaF salt with polymer blend (PEO/PVP) electrolytes on ionic conductivity and optical energy band gaps

Sodium ion conducting polymer blend electrolyte films, based on polyethylene oxide (PEO) and polyvinyl pyrrolidone (PVP) complexed with NaF salt, were prepared using solution casting technique. The complexation of the salt with the polymer blend was confirmed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-vis spectroscopy. Electrical conductivity of the films was measured with impedance analyzer in the frequency range of 1 Hz to 1 MHz and in the temperature range of 303-348 K. It was observed that the magnitude of conductivity increased with the increase in the salt concentration as well as the temperature. UV-vis absorption spectra in wavelength region of 200-800 nm were used to evaluate the optical properties like direct and indirect optical energy band gaps, optical absorption edge. The optical band gaps decreased with the increase in Na⁺ ion concentration. This suggests that NaF, as a dopant, is a good choice to improve the electrical properties of PEO/PVP polymer blend electrolytes.     

Effect of ionic liquid on the properties of poly(vinylidene fluoride)-based gel polymer electrolytes

Poly(vinylidene fluoride)-based polymer electrolytes using ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsufonyl)imide as the plasticizer were prepared by solution casting method. The effects of the solvent evaporation temperature (SET) and ionic liquid content (ILC) on the properties and structures of the polymer electrolytes were investigated by characterization of scanning electron microscope (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry, as well as mechanical and ionic conductivity test. It was confirmed that both SET and ILC had significant influence on the morphology, degree of crystallinity, mechanical properties, and ionic conductivity of the prepared polymer electrolytes. With ILC of 40 %, an excellent polymer electrolyte can be obtained at SET of 60 °C, which exhibited ionic conductivity up to ca. 10^?4 S/cm at room temperature, accompanied by excellent tensile strength of 22.8 MPa and elongation at break of 540 %.     

Effect of plasticizer on electrical conductivity and cell parameters of (PVC+KBrO<Subscript>3</Subscript>) polymer electrolyte system

The effect of a plasticizer dimethyl formamide (DMF) on the properties of a potassium ion conducting electrolyte based on polyvinyl chloride (PVC) complexed with potassium bromate (KBrO₃) prepared using solution-cast technique was investigated. Various experimental techniques, such as electrical conductivity (composition and temperature dependence) and transport number measurements, were used to characterize these polymer electrolyte films. It was found that the addition of plasticizer (DMF) significantly improved the ionic conductivity. Transport number for K⁺ ion ranged from 0.95 to 0.97 depending on the composition and temperature. Electrochemical cells of configuration K/PVC+KBrO₃/(I₂+C+electrolyte) and K/PVC+KBrO₃+plasticizer/(I₂+C+electrolyte) were fabricated. The discharge characteristics of the cells were studied under a constant load of 100 kΩ. The open-circuit voltage, short-circuit current, and discharge time for the plateau region were measured. The PVC+KBrO₃ polymer electrolyte system with added plasticizer showed an increased discharge time with respect to pure PVC+KBrO₃ electrolyte system. The features of complexation of the electrolytes were studied by X-ray diffraction.