The Solid‐Phase Synthesis of an Fe‐N‐C Electrocatalyst for High‐Power Proton‐Exchange Membrane Fuel Cells

The environmentally friendly synthesis of highly active Fe‐N‐C electrocatalysts for proton‐exchange membrane fuel cells (PEMFCs) is desirable but remains challenging. A simple and scalable method is presented to fabricate Fe^II‐doped ZIF‐8, which can be further pyrolyzed into Fe‐N‐C with 3 wt % of Fe exclusively in Fe‐N₄ active moieties. Significantly, this Fe‐N‐C derived acidic PEMFC exhibits an unprecedented current density of 1.65 A cm^?2 at 0.6 V and the highest power density of 1.14 W cm^?2 compared with previously reported NPMCs. The excellent PEMFC performance can be attributed to the densely and atomically dispersed Fe‐N₄ active moieties on the small and uniform catalyst nanoparticles.     

Chiral Brønsted Acid from Chiral Phosphoric Acid Boron Complex and Water: Asymmetric Reduction of Indoles

A new chiral Brønsted acid, generated in situ from a chiral phosphoric acid boron (CPAB) complex and water, was successfully applied to asymmetric indole reduction. This “designer acid catalyst”, which is more acidic than TsOH as suggested by DFT calculations, allows the unprecedented direct asymmetric reduction of C2‐aryl‐substituted N‐unprotected indoles and features good to excellent enantioselectivities with broad functional group tolerance. DFT calculations and mechanistic experiments indicates that this reaction undergoes C3‐protonation and hydride‐transfer processes. Besides, bulky C2‐alkyl‐substituted N‐unprotected indoles are also suitable for this system.     

S‐Doping of an Fe/N/C ORR Catalyst for Polymer Electrolyte Membrane Fuel Cells with High Power Density

Fe/N/C is a promising non‐Pt electrocatalyst for the oxygen reduction reaction (ORR), but its catalytic activity is considerably inferior to that of Pt in acidic medium, the environment of polymer electrolyte membrane fuel cells (PEMFCs). An improved Fe/N/C catalyst (denoted as Fe/N/C‐SCN) derived from Fe(SCN)₃, poly‐m‐phenylenediamine, and carbon black is presented. The advantage of using Fe(SCN)₃ as iron source is that the obtained catalyst has a high level of S doping and high surface area, and thus exhibits excellent ORR activity (23 A g^?1 at 0.80 V) in 0.1 M H₂SO₄ solution. When the Fe/N/C‐SCN was applied in a PEMFC as cathode catalyst, the maximal power density could exceed 1 W cm^?2.     

Late-Stage Direct o-Alkenylation of Phenols by PdII-Catalyzed C−H Functionalization

o-Alkenylation of unprotected phenols has been developed by direct C−H functionalization catalyzed by Pd^II. This work features phenol group as a directing group and realizes highly site-selective C−H bond functionalization of phenols to achieve the corresponding products in moderate to excellent yields at 60 °C. The advantages of this reaction include unprecedented C−H functionalization using phenol as a directing group, high regioselectivity, good substrate scope, mild reaction conditions, and high efficiency. To the best of our knowledge, this is the first example of a regioselective C−H alkenylation of unprotected phenols utilizing phenolic hydroxyl group as a directing group. The alkenylation of unprotected tyrosine and intramolecular cyclization are also successfully carried out under this catalytic system in good yields. Furthermore, this novel method enables a late-stage modification of complex phenol-containing bioactive molecules toward a diversity-oriented drug discovery.     

Catalytic Asymmetric Synthesis of 3‐Indolyl Methanamines Using Unprotected Indoles and N‐Boc Imines under Basic Conditions

A chiral imidazolidine‐containing NCN/Pd‐OTf catalyst ( C4 ) promoted the nucleophilic addition of unprotected indoles to N‐Boc imines. Using sulfinyl amines as the N‐Boc imine precursors, the combined use of C4 with K₂CO₃ activated the NH indoles to give chiral 3‐indolyl methanamines with up to 98 % ee. Compared with conventional acid‐catalyzed Friedel–Crafts reactions, this reaction proceeds under mildly basic conditions and is advantageous for the use of acid‐sensitive substrates.     

Intramolecular Acetyl Transfer to Olefins by Catalytic C−C Bond Activation of Unstrained Ketones

A rhodium‐catalyzed intramolecular acetyl‐group transfer has been achieved through a “cut and sew” process. The challenge arises from the existence of different competitive pathways. Preliminary success has been achieved with unstrained enones that contain a biaryl linker. The use of an electron‐rich N‐heterocycilc carbene (NHC) ligand is effective to inhibit undesired β‐hydrogen elimination. Various 9,10‐dihydrophenanthrene derivatives can be prepared with excellent functional‐group compatibility. The ¹³C‐labelling study suggests that the reaction begins with cleavage of the unstrained C?C bond, followed by migratory insertion and reductive elimination.     

Fuctionalization of Linear and Angular Phenothiazine and Phenoxazine Ring Systems via Pd(0)/XPhos Mediated Suzuki‐Miyaura Cross‐coupling Reactions

Chloro‐substituted phenothiazines and phenoxazines were successfully derivatized with phenylboronic and styrylboronic acids using Suzuki–Miyaura cross‐coupling reaction catalyzed by Pd(0)/XPhos for the first time in good yields. The protocol employed 4 mol% Pd and 7 mol% XPhos with K₃PO₄ in acetonitrile at 80°C. The reaction condition is compatible with carbonyl and unprotected N–H groups in substrates. Structural assignments were established by combined spectroscopic (UV, IR, ¹H, and ¹³C NMR), MS, and elemental analytical data.     

Selective Functionalization of Aromatic C(sp2)−H Bonds in the Presence of Benzylic C(sp3)−H Bonds by Electron‐Deficient Carbenoids Generated from 4‐Acyl‐1‐Sulfonyl‐1,2,3‐Triazoles

A rhodium(II)‐catalyzed reaction of newly prepared 4‐acyl‐1‐sulfonyl‐1,2,3‐triazoles with benzene, and its derivatives, is investigated. Acceptor/acceptor carbenoids generated from 4‐acyltriazoles undergo selective insertion at aromatic C(sp²)−H bonds in the presence of benzylic C(sp³)−H bonds to produce N ‐sulfonylenaminones.     

13C dynamic nuclear polarization using isotopically enriched 4‐oxo‐TEMPO free radicals

The nitroxide‐based free radical 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) is a widely used polarizing agent in NMR signal amplification via dissolution dynamic nuclear polarization (DNP). In this study, we have thoroughly investigated the effects of ¹⁵N and/or ²H isotopic labeling of 4‐oxo‐TEMPO free radical on ¹³C DNP of 3 M [1‐¹³C] sodium acetate samples in 1 : 1 v/v glycerol : water at 3.35 T and 1.2 K. Four variants of this free radical were used for ¹³C DNP: 4‐oxo‐TEMPO, 4‐oxo‐TEMPO‐¹⁵N, 4‐oxo‐TEMPO‐d₁₆ and 4‐oxo‐TEMPO‐¹⁵N,d₁₆. Our results indicate that, despite the striking differences seen in the electron spin resonance (ESR) spectral features, the ¹³C DNP efficiency of these ¹⁵N and/or ²H‐enriched 4‐oxo‐TEMPO free radicals are relatively the same compared with ¹³C DNP performance of the regular 4‐oxo‐TEMPO. Furthermore, when fully deuterated glassing solvents were used, the ¹³C DNP signals of these samples all doubled in the same manner, and the ¹³C polarization buildup was faster by a factor of 2 for all samples. The data here suggest that the hyperfine coupling contributions of these isotopically enriched 4‐oxo‐TEMPO free radicals have negligible effects on the ¹³C DNP efficiency at 3.35 T and 1.2 K. These results are discussed in light of the spin temperature model of DNP. Copyright © 2016 John Wiley & Sons, Ltd.     

Syntheses and Spectroscopic Study of Some New N‐4‐Fluorobenzoyl Phosphoric Triamides; Crystal Structures of 4‐F‐C6H4C(O)N(H)P(O)R2, R = NH‐C(CH3)3, NH‐CH2C6H5, N(CH3)(CH2C6H5)

Some new N‐4‐Fluorobenzoyl phosphoric triamides with formula 4‐F‐C₆H₄C(O)N(H)P(O)X₂, X = NH‐C(CH₃)₃ ( 1 ), NH‐CH₂‐CH=CH₂ ( 2 ), NH‐CH₂C₆H₅ ( 3 ), N(CH₃)(C₆H₅) ( 4 ), NH‐CH(CH₃)(C₆H₅) ( 5 ) were synthesized and characterized by ¹H, ¹³C, ³¹P NMR, IR and Mass spectroscopy and elemental analysis. The structures of compounds 1 , 3 and 4 were investigated by X‐ray crystallography. The P=O and C=O bonds in these compounds are anti. Compounds 1 and 3 form one dimensional polymeric chain produced by intra‐ and intermolecular ‐P=O···H‐N‐ hydrogen bonds. Compound 4 forms only a centrosymmetric dimer in the crystalline lattice via two equal ‐P=O···H‐N‐ hydrogen bonds. ¹H and ¹³C NMR spectra show two series of signals for the two amine groups in compound 1 . This is also observed for the two α‐methylbenzylamine groups in 5 due to the presence of chiral carbon atom in molecule. ¹³C NMR spectrum of compound 4 shows that ²J(P,C_aliphatic) coupling constant for CH₂ group is greater than for CH₃ in agreement with our previous study. Mass spectra of compounds 1 ‐ 3 (containing 4‐F‐C₆H₄C(O)N(H)P(O) moiety) indicate the fragments of amidophosphoric acid and 4‐F‐C₆H₄CN⁺ that formed in a pseudo McLafferty rearrangement pathway. Also, the fragments of aliphatic amines have high intensity in mass spectra.     

C(sp3)−H Oxidative Addition and Transfer Hydrogenation Chemistry of a Titanium(II) Synthon: Mimicry of Late‐Metal Type Reactivity

Two‐electron reduction of the Ti^IV compound (^ketguan)(Im^DippN)Ti(OTf)₂ ( 3 ) gives the arene‐masked complex (^ketguan)(η⁶‐Im^DippN)Ti ( 1 ) in excellent yield. Upon standing in solution, 1 converts to a Ti^IV metallacycle ( 4 ) through dehydrogenation of a pendant isopropyl group. Spectroscopic evidence shows this transformation initially proceeds via the oxidative addition of a C(sp³)?H bond and can be reversed upon exposure of 4 to H₂. Interestingly, treatment of 1 with cyclohexene gives cyclohexane and 4 via a titanium‐mediated transfer hydrogenation reaction, a process that can be extended to catalytically hydrogenate other unsaturated hydrocarbons under mild conditions. These results, rare for the early‐metals, suggest 1 possesses chemical characteristics reminiscent of noble, late‐metals.     

Easily Accessible Auxiliary for Palladium‐Catalyzed Intramolecular Amination of C(sp2)H and C(sp3)H Bonds at δ‐ and ε‐Positions

An easily synthesized and accessible N,O‐bidentate auxiliary has been developed for selective C? H activation under palladium catalysis. The novel auxiliary showed its first powerful application in C? H functionalization of remote positions. Both C(sp²)? H and C(sp³)? H bonds at δ‐ and ε‐positions were effectively activated, thus giving tetrahydroquinolines, benzomorpholines, pyrrolidines, and indolines in moderate to excellent yields by palladium‐catalyzed intramolecular C? H amination.     

Rhodium(III)‐Catalyzed CH Activation and Indole Synthesis With Hydrazone as an Auto‐Formed and Auto‐Cleavable Directing Group

An efficient, practical, and external‐oxidant‐free indole synthesis from readily available aryl hydrazines was developed, by using hydrazone as a directing group for Rh^III‐catalyzed C?H activation and alkyne annulation. The hydrazone group was formed by in situ condensation of hydrazines and C?O source, whereas its N?N bond was served as an internal oxidant, for which we termed it as an auto‐formed and auto‐cleavable directing group (DG^auto). This method needs no step for pre‐installation and post‐cleavage of the directing group, making it a quite easily scalable approach to access unprotected indoles with high step economy. The DG^auto strategy was also applicable for isoquinoline synthesis. In addition, synthetic utilities of this chemistry for rapid assembly of π‐extended nitrogen‐doped polyheterocycles and bioactive molecules were demonstrated.     

Comparative analysis of 13C shielding constants stereospecificity in the silicon and germanium derivatives of acetylenic aldehyde and ketone oximes based on the 13C NMR spectroscopy and GIAO calculations

In the acetylenic aldehyde oximes with substituents containing silicon and germanium, the ¹³C NMR signal of the C‐2 carbon of triple bond is shifted by 3.5 ppm to lower frequency and that of the C‐3 carbon is moved by 7 ppm to higher frequency on going from E to Z isomer. A greater low‐frequency effect of 5.5 ppm on the C‐2 carbon signal and a greater high‐frequency effect of 11 ppm on the C‐3 carbon signal are observed in the analogous acetylenic ketone oximes. The carbon chemical shift of the C?N bond is larger by 4 ppm in E isomer relative to Z isomer for the aldehyde and ketone oximes. The ²⁹Si chemical shifts in the silicon containing acetylenic aldehyde and ketone oximes are almost the same for the diverse isomers. The trends in changes of the measured chemical shifts are well reproduced by the gauge‐including atomic orbital (GIAO) calculations of the ¹³C and ²⁹Si shielding constants. Copyright © 2009 John Wiley & Sons, Ltd.     

2J(P,C) and 3J(P,C) Coupling Constants in Some New Phosphoramidates. Crystal Structures of CF3C(O)N(H)P(O)[N(CH3)(CH2C6H5)]2 and 4‐NO2‐C6H4N(H)P(O)[4‐CH3‐NC5H9]2

Some new phosphoramidates were synthesized and characterized by ¹H, ¹³C, ³¹P NMR, IR spectroscopy and elemental analysis. The structures of CF₃C(O)N(H)P(O)[N(CH₃)(CH₂C₆H₅)]₂ ( 1 ) and 4‐NO₂‐C₆H₄N(H)P(O)[4‐CH₃‐NC₅H₉]₂ ( 6 ) were confirmed by X‐ray single crystal determination. Compound 1 forms a centrosymmetric dimer and compound 6 forms a polymeric zigzag chain, both via ‐N‐H…O=P‐ intermolecular hydrogen bonds. Also, weak C‐H…F and C‐H…O hydrogen bonds were observed in compounds 1 and 6 , respectively. ¹³C NMR spectra were used for study of ²J(P,C) and ³J(P,C) coupling constants that were showed in the molecules containing N(C₂H₅)₂ and N(C₂H₅)(CH₂C₆H₅) moieties, ²J(P,C)>³J(P,C). A contrast result was obtained for the compounds involving a five‐membered ring aliphatic amine group, NC₄H₈. ²J(P,C) for N(C₂H₅)₂ moiety and in NC₄H₈ are nearly the same, but ³J(P, C) values are larger than those in molecules with a pyrrolidinyl ring. This comparison was done for compounds with six and seven‐membered ring amine groups. In compounds with formula XP(O)[N(CH₂R)(CH₂C₆H₅)]₂, ²J(P,CH₂)_benzylic>²J(P,CH₂)_aliphatic, in an agreement with our previous study.     

Heck coupling reaction using monomeric ortho‐palladated complex of 4‐methoxy‐ benzoylmethylenetriphenylphosphorane under microwave irradiation

The activity of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex, A (MOBPPY = 4‐methoxybenzoylmethylenetriphenyl‐ phosphoraneylide), was investigated in the Heck–Mizoroki C? C cross‐coupling reaction under conventional heating and microwave irradiation conditions. The complex is an active and efficient catalyst for the Heck reaction of aryl halides. The yields were excellent using a catalytic amount of [Pd(C₆H₄CH₂ NH₂‐κ²‐C‐N)PPh₃MOBPPY]OTf complex in N‐methyl‐2‐pyrrolidinone (NMP) at 130 °C and 600 W. In comparison to conventional heating conditions, the reactions under microwave irradiation gave higher yields in shorter reaction times. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Efficient Fe‐Co‐N‐C Electrocatalyst Towards Oxygen Reduction Derived from a Cationic CoII‐based Metal–Organic Framework Modified by Anion‐Exchange with Potassium Ferricyanide

Fe‐Co‐N‐C electrocatalysts have proven superior to their counterparts (e.g. Fe‐N‐C or Co‐N‐C) for the oxygen reduction reaction (ORR). Herein, we report on a unique strategy to prepare Fe‐Co‐N‐C?x (x refers to the pyrolysis temperature) electrocatalysts which involves anion‐exchange of [Fe(CN)₆]^3? into a cationic Co^II‐based metal‐organic framework precursor prior to heat treatment. Fe‐Co‐N‐C‐900 exhibits an optimal ORR catalytic performance in an alkaline electrolyte with an onset potential (E_onset: 0.97 V) and half‐wave potential (E_1/2: 0.86 V) comparable to that of commercial Pt/C (E_onset=1.02 V; E_1/2=0.88 V), which outperforms the corresponding Co‐N‐C‐900 sample (E_onset=0.92 V; E_1/2=0.84 V) derived from the same MOF precursor without anion‐exchange modification. This is the first example of Fe‐Co‐N‐C electrocatalysts fabricated from a cationic Co^II‐based MOF precursor that dopes the Fe element via anion‐exchange, and our current work provides a new entrance towards MOF‐derived transition‐metal (e.g. Fe or Co) and nitrogen‐codoped carbon electrocatalysts with excellent ORR activity.     

Enantioselective Rhodium‐Catalyzed Addition of Arylboroxines to N‐Unprotected Ketimines: Efficient Synthesis of Cipargamin

Highly enantioselective rhodium‐catalyzed addition of arylboroxines to N‐unprotected ketimines is realized for the first time by employing chiral BIBOP‐type ligands with a Rh loading as low as 1 mol %. A range of chiral α‐trifluoromethyl‐α,α‐diaryl α‐tertiary amines or 3‐amino‐3‐aryloxindoles were formed with excellent ee values and yields by employing either WingPhos or PFBO‐BIBOP as the ligand. The method has enabled an efficient enantioselective synthesis of cipargamin.     

N2,N2′‐disubstituted oxalic acid bishydrazides: novel ligands for copper‐catalyzed C?N coupling reactions in water

A series of N²,N²′‐disubstituted oxalic acid bishydrazides were synthesized. Some, for example, N²,N²′‐di‐1‐(4‐methoxyphenyl)‐ethanyloxylic‐(bishydrazide), are novel and effective ligands for copper‐catalyzed Ullmann‐type C N coupling reaction in water. A variety of amines could be effectively N‐arylated with aryl halides under both microwave irradiation and conventional heating (even at 30 °C) with good to excellent yields. Copyright © 2011 John Wiley & Sons, Ltd.     

Less Is More: Three‐Coordinate C,N‐Chelated Distannynes and Digermynes

We report here the synthesis of new C,N‐chelated chlorostannylenes and germylenes L³MCl (M=Sn( 1 ), Ge ( 2 )) and L⁴MCl (M=Sn( 3 ), Ge ( 4 )) containing sterically demanding C,N‐chelating ligands L^{3, 4} (L³=[2,4‐di‐tBu‐6‐(Et₂NCH₂)C₆H₂]^?_; L⁴=[2,4‐di‐tBu‐6‐{(C₆H₃‐2′,6′‐iPr₂)N=CH}C₆H₂]^?). Reductions of 1 – 4 yielded three‐coordinate C,N‐chelated distannynes and digermynes [L^{3, 4}M ]₂ for the first time ( 5 : L³, M=Sn, 6 : L³, M=Ge, 7 : L⁴, M=Sn, 8 : L⁴, M=Ge). For comparison, the four‐coordinate distannyne [L⁵Sn]₂ ( 10 ) stabilized by N,C,N‐chelate L⁵ (L⁵=[2,6‐{(C₆H₃‐2′,6′‐Me₂)N?CH}₂C₆H₃]^?) was prepared by the reduction of chlorostannylene L⁵SnCl ( 9 ). Hence, we highlight the role of donor‐driven stabilization of tetrynes. Compounds 1 – 10 were characterized by means of elemental analysis, NMR spectroscopy, and in the case of 1 , 2 , 5 – 7 , and 10 , also by single‐crystal X‐ray diffraction analysis. The bonding situation in either three‐ or four‐coordinate distannynes 5 , 7 , and 10 was evaluated by DFT calculations. DFT calculations were also used to compare the nature of the metal–metal bond in three‐coordinate C,N‐chelating distannyne [L³Sn]₂ ( 5 ) and related digermyme [L³Ge]₂ ( 6 ).