Nickel‐Catalyzed Mizoroki–Heck‐ versus Michael‐Type Addition of Organoboronic Acids to α,β‐Unsaturated Alkenes through Fine‐Tuning of Ligands

Various arylboronic acids reacted with activated alkenes in the presence of [Ni(dppe)Br₂], ZnCl₂, and H₂O in CH₃CN at 80 °C to give the corresponding Mizoroki–Heck‐type addition products in good to excellent yields. Furthermore, 1 equivalent of the hydrogenation product of the activated alkene was also produced. By tuning the ligands of the nickel complexes and the reaction conditions, Michael‐type addition was achieved in a very selective manner. Thus, various p‐ and o‐substituted arylboronic acids or alkenylboronic acid reacted smoothly with activated alkenes in CH₃CN at 80 °C for 12 h catalyzed by Ni(acac)₂, P(o‐anisyl)₃, and K₂CO₃ to give the corresponding Michael‐type addition products in excellent yields. However, for m‐substituted arylboronic acids, the yields of Michael‐type addition products are very low. The cause of this unusual meta‐substitution effect is not clear. By altering the solvent or phosphine ligand, the product yields for m‐substituted arylboronic acids were greatly improved. In contrast to previous results in the literature, the present catalytic reactions required water for Mizoroki–Heck‐type products and dry reaction conditions for Michael‐type addition products. Possible mechanistic pathways for both addition reactions are proposed.     

Heteroaromatic Tosylates as Electrophiles in Regioselective Mizoroki–Heck‐Coupling Reactions with Electron‐Rich Olefins

Easy and direct : Regioselective Mizoroki–Heck‐coupling reactions using heteroaromatic tosylates as electrophiles were achieved, thus providing direct and easy access to highly functionalized α‐heteroarylvinyl amides and ethers.

     

Preparation of siloxene nanosheet‐supported palladium as sustainable catalyst for Mizoroki–Heck reaction

Siloxene nanosheets were successfully modified with palladium nanoparticles by reducing palladium chloride with hydrazine hydrate. The palladium nanoparticles–siloxene nanosheets as a catalyst for the Mizoroki–Heck reaction exhibited high activity, recoverability and stability. The structural morphology of the catalyst was investigated using transmission electron microscopy. High efficiency of the catalyst was proved in the Mizoroki–Heck reaction after five catalytic recycles. Copyright © 2014 John Wiley & Sons, Ltd.     

Pd(II) complexes of Schiff bases and their application as catalysts in Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions

Schiff bases of 2‐(phenylthio)aniline, (C₆H₅)SC₆H₄N?CR (R = (o‐CH₃)(C₆H₅), (o‐OCH₃)(C₆H₅) or (o‐CF₃)(C₆H₅)), and their palladium complexes (PdLCl₂) were synthesized. The compounds were characterized using ¹H NMR and ¹³C NMR spectroscopy and micro analysis. Also, electrochemical properties of the ligands and Pd(II) complexes were investigated in dimethylformamide–LiClO₄ solution with cyclic and square wave voltammetry techniques. The Pd(II) complexes showed both reversible and quasi‐reversible processes in the ?1.5 to 0.3 V potential range. The synthesized Pd(II) complexes were evaluated as catalysts in Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Chugaev‐type bis(acyclic diaminocarbenes) as a new ligand class for the palladium‐catalyzed Mizoroki–Heck reaction

A series of differently substituted Chugaev‐type palladium bis(acyclic diaminocarbene) complexes was screened to identify the most active catalyst for Mizoroki–Heck coupling reactions of aryl bromides with styrene. The best catalyst, which contains three methyl groups on the bis(carbene) ligand, gives excellent coupling yields at 120 °C for both activated and deactivated aryl bromides. However, activity with aryl chlorides is limited to electron‐deficient examples. The optimized catalyst demonstrates limited air and moisture stability, giving reduced yields in couplings of activated aryl bromides in open‐flask conditions. The modular synthesis of this class of catalysts should allow further fine‐tuning of activity in Mizoroki–Heck and related coupling reactions. Copyright © 2012 John Wiley & Sons, Ltd.     

Polyaniline‐anchored palladium catalyst‐mediated Mizoroki–Heck and Suzuki–Miyaura reactions and one‐pot Wittig–Heck and Wittig–Suzuki reactions

A polyaniline‐anchored palladium catalyst was prepared and screened for coupling reactions of aryl halides. The robust and recyclable catalyst was effective in Mizoroki–Heck and Suzuki–Miyaura reactions of aryl bromides and aryl iodides. The catalyst system was further employed for one‐pot Wittig–Heck and Wittig–Suzuki combinations to build conjugated compounds in good conversions. Copyright © 2014 John Wiley & Sons, Ltd.     

An expedient approach to enhance Mizoroki–Heck coupling reaction by infrared irradiation using palladacycle compounds

An alternative and environmentally friendly strategy to promote the Mizoroki–Heck cross‐coupling reaction by the use of infrared irradiation using palladacycles as precatalysts is reported. Coupling products are obtained in high yield and short reaction time. A comparison with the classical use of reflux conditions, and commercial sources of palladium complexes, shows the advantages of this new alternative for promoting coupling reactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetic iron oxide nanoparticles–N‐heterocyclic carbene–palladium(II): a new,efficient and robust recyclable catalyst for Mizoroki–Heck and Suzuki–Miyaura coupling reactions

A new and efficient nanoparticle–N‐heterocyclic carbene–palladium complex was synthesized and characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, field emission scanning electron microscopy, energy‐dispersive X‐ray analysis, X‐ray diffraction, transmission electron microscopy, elemental analysis, inductively coupled plasma analysis and vibrating sample magnetometry. This catalytic system was found to be a highly active catalyst in the Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions. These reactions were best performed in dimethylformamide and water, respectively, in the presence of only 0.054 mol% of palladium under mild conditions. Moreover, the catalyst could be recovered easily and reused at least ten times without any considerable loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Photoinduced Single‐Electron Transfer as an Enabling Principle in the Radical Borylation of Alkenes with NHC–Borane

A photoinduced SET process enables the direct B?H bond activation of NHC–boranes. In contrast to common hydrogen atom transfer (HAT) strategies, this photoinduced reaction simply takes advantage of the beneficial redox potentials of NHC–boranes, thus obviating the need for extra radical initiators. The resulting NHC–boryl radical was used for the borylation of a wide range of α‐trifluoromethylalkenes and alkenes with diverse electronic and structural features, providing facile access to highly functionalized borylated molecules. Labeling and photoquenching experiments provide insight into the mechanism of this photoinduced SET pathway.     

Polyacrylonitrile fiber mat‐supported palladium catalyst for Mizoroki–Heck reaction in aqueous solution

A novel palladium catalyst immobilized on polyacrylonitrile fiber mats (Pd/PAN) was prepared by electrospinning. The catalytic activity and recyclability of the microwave‐assisted Pd/PAN fiber mats were examined for the Mizoroki–Heck cross‐coupling of aryl iodides with three different acrylates in aqueous solution. The morphology of the prepared Pd/PAN fiber mats was characterized by scanning electron microscopy. The large size of the PAN fiber mat‐supported palladium catalyst enables much easier separation from the reaction mixture by simple filtration. Density functional theory calculation indicates that the chelation energy of palladium chloride (PdCl₂) with propionitrile (model of PAN) is considerable smaller than that of PdCl₂ with water, suggesting that the stability and reactivity of the Pd/PAN fiber mats catalyst could be improved through the surface derivatization with polar functional groups. Copyright © 2011 John Wiley & Sons, Ltd.     

Nickel‐Catalyzed Mizoroki–Heck Reaction of Aryl Sulfonates and Chlorides with Electronically Unbiased Terminal Olefins: High Selectivity for Branched Products

Achieving high selectivity in the Heck reaction of electronically unbiased alkenes has been a longstanding challenge. Using a nickel‐catalyzed cationic Heck reaction, we were able to achieve excellent selectivity for branched products (≥19:1 in all cases) over a wide range of aryl electrophiles and aliphatic olefins. A bidentate ligand with a suitable bite angle and steric profile was key to obtaining high branched/linear selectivity, whereas the appropriate base suppressed alkene isomerization of the product. Although aryl triflates are traditionally used to access the cationic Heck pathway, we have shown that, by using triethylsilyl trifluoromethanesulfonate, we can effect a counterion exchange of the catalytic nickel complex, such that cheaper and more stable aryl chlorides, mesylates, tosylates, and sulfamates can be used to yield the same branched products with high selectivity.     

Mizoroki–Heck and Suzuki–Miyaura reactions mediated by poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐stabilized magnetically separable palladium catalyst

The purpose of this work was to synthesize and characterize a new magnetic polymer nanosphere‐supported palladium(II) acetate catalyst for reactions requiring harsh conditions. In this regard, an air‐stable, moisture‐stable and highly efficient heterogenized palladium was synthesized by the coordination of palladium(II) acetate with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted modified magnetic nanoparticles with a core–shell structure. The structure of the newly developed catalyst was characterized using various techniques. The catalytic activity of the resultant nano‐organometallic catalyst was evaluated in Mizoroki–Heck and Suzuki–Miyaura reactions to afford the corresponding coupling products in good to excellent yields. High selectivity as well as outstanding turnover number (14 143, 4900) and turnover frequency (28 296, 7424) values were recorded for the catalyst in Suzuki–Miyaura and Mizoroki–Heck reactions, respectively. Magnetic separation and recycling of the catalyst for at least six runs became possible without any significant loss of efficiency or any detectable palladium leaching.     

Highly efficient polymer‐stabilized palladium heterogeneous catalyst: Synthesis,characterization and application for Suzuki–Miyaura and Mizoroki–Heck coupling reactions

A suitable approach to stabilize palladium nanoparticles (Pd NPs), with an average diameter of 3–4 nm, on magnetic polymer is described. A new magnetic polymer containing 4′‐(4‐hydroxyphenyl)‐2,2′:6′,2″‐terpyridine (HPTPy) ligand was prepared by the polymerization of itaconic acid (ITC) as a monomer and trimethylolpropane triacrylate (TMPTA) as a cross‐linker and fully characterized. Pd NPs embedded on the magnetic polymer were successfully applied in Suzuki–Miyaura and Mizoroki–Heck coupling reactions under low palladium loading conditions, and provided the corresponding products with excellent yields (up to 98%) and high catalytic activities (TOF up to 257 hr^?1). Also, the catalyst can be easily separated and reused for at least consecutive five times with a small drop in catalytic activity.     

Synthesis of dendrimers terminated by DABCO ligands and applications of its palladium nanoparticles for catalyzing Suzuki–Miyaura and Mizoroki–Heck couplings

A new kind of silica‐supported third‐generation dendrimers capped by 1,4‐diaza‐bicyclo[2.2.2]octane (DABCO) group‐stabilized palladium(0) nanoparticles, and their enhanced catalytic activity in Suzuki–Miyaura and Mizoroki–Heck reactions in excellent yield under mild conditions, was reported. The resulting silica‐supported dendrimer‐stabilized palladium(0) nanoparticles with a particle size of 10–20 nm were prepared in situ by treatment with PdCl₂ and hydrazine in ethanol at 60 °C for 24 h. The catalyst as prepared was characterized by FT‐IR, X‐ray diffraction, thermal analysis, elementary analysis (EA), scanning electron microscopy and transmission electron microscopy. Recycling experiments showed that the catalyst could be easily recovered by simple filtration and reused for up to five cycles without losing its activity. Copyright © 2012 John Wiley & Sons, Ltd.     

Pd(II) salen complex covalently anchored to multi‐walled carbon nanotubes as a heterogeneous and reusable precatalyst for Mizoroki–Heck and Hiyama cross‐coupling reactions

A Pd(II) salen complex anchored to multi‐walled carbon nanotubes showed excellent catalytic activity and stability for the Mizoroki–Heck and Hiyama cross‐couplings of aryl halides with olefins and phenylsiloxanes. Furthermore, the heterogeneous catalyst could be reused up to four times with the catalytic activity being recovered easily after simple manipulations. Copyright © 2014 John Wiley & Sons, Ltd.     

Cobalt supported on dendronized magnetic nanoparticles: A new highly efficient and recyclable catalyst for the Mizoroki–Heck cross‐coupling reaction

Polyamidoamine (PAMAM) is one of the most interesting types of hyperbranched polymers that carry a large number of amino groups on its surface. PAMAM has gained significant attention from synthetic organic chemists due to its structural characteristics, controllable structure, inner porosity, and ability to trap a wide range of ions and molecules. So, in this work, the PAMAM dendrimer was synthesized, grafted onto the surface of magnetite nanoparticles, and the resulting hybrid nanoparticles were then employed as suitable host for immobilizing cobalt nanoparticles. The newly developed catalyst was well characterized by Fourier transform‐infrared, X‐ray diffraction, thermogravimetric analysis, field emission‐scanning electron microscopy, transmission electron microscopy, atomic absorption spectroscopy, element mapping and energy‐dispersive X‐ray analysis. The efficiency of the as‐prepared nanocatalyst was evaluated for the Mizoroki–Heck cross‐coupling reactions. The MNP@PAMAM‐Co represented perfect catalytic efficiency and high selectivity for the Mizoroki–Heck cross‐coupling reaction compared with previously reported catalysts. The catalyst separation from the reaction mixture was easily achieved with the assistance of an external magnetic field, and its recycling was also investigated for five consecutive runs. Hot filtration confirmed no leaching of the active metal during the Heck coupling.     

Ultra‐small and highly dispersed Pd nanoparticles inside the pores of ZIF‐8: Sustainable approach to waste‐minimized Mizoroki–Heck cross‐coupling reaction based on reusable heterogeneous catalyst

The rapid development of nanomaterials, particularly advanced hybrid nanoparticles, has made new opportunities for the design and fabrication of high‐performance metal‐based catalysts. However, generating metal nanoparticles of desired size without aggregation is an important challenge for enhancing the catalytic activity of metal nanoparticles supported in the host matrix. In this work, a hybrid nanoporous material, namely Pd nanoparticles@N‐heterocyclic carbene@ZIF‐8, with a high internal surface area was successfully prepared using a dispersed anionic sulfonated N‐heterocyclic carbene–Pd(II) precursor inside the cavities of zeolitic imidazolate framework (ZIF‐8) using an impregnation approach followed by reduction with NaBH₄. The anionic sulfonated N‐heterocyclic carbene was found to be a superb ligand for the stabilization of Pd nanoparticles in the pores of ZIF‐8. The resulting system was applied to the Mizoroki–Heck cross‐coupling reaction, in which the catalyst showed high catalytic activity under mild reaction conditions.