Selective Encapsulation and Unusual Stabilization of cis-Isomers by a Spherical Polyaromatic Cavity

To explore new cavity functions, we herein employed cis-trans stereoisomers with a N=N, C=C, or C=N unit as guest indicators for a polyaromatic capsule. Thanks to the rigid, spherical cavity with a diameter of ∼1 nm, azobenzene and stilbene derivatives are quantitatively encapsulated by the capsule with 100 % cis-selectivity in water. The isomerization of the cis-azo compound is suppressed against heat and light in the cavity, due to the confinement effect. Furthermore, C,N-diphenyl imine derivatives are quantitatively encapsulated by the capsule in water and adopt an otherwise unstable cis-form. The polyaromatic cavity suppresses the hydrolysis of the imines in water, even at elevated temperature, due to the shielding effect. Accordingly, the properties of the cis-trans isomers could be largely altered through supramolecular manipulation.     

Open versus Closed Polyaromatic Nanocavity: Enhanced Host Abilities toward Large Dyes and Pigments

Host functions of polyaromatic nanocavities were revealed by using an M₂L₄ molecular cage and capsule. On the basis of the previously reported M₂L₄ capsule with a closed polyaromatic cavity, a new M₂L₄ cage (as a mixture of the isomers) was prepared by the quantitative assembly of two metal ions and four desymmetrized bispyridine ligands with a single polyaromatic panel. The obtained, open nanocavity of the cage exhibited enhanced binding abilities toward large dyes and pigments in water. For example, two molecules of coumarin dyes were bound in the nanocavity and showed strong whitish emission (up to Φ_F=34 %). Furthermore, metallopigments, the sizes of which are larger than the inner cavities of the cage and capsule, were bound only in the open polyaromatic nanocavity of the cage to give water-soluble 1:1 host–guest complexes.     

Complexation of anionic liposomes with spherical polycationic brushes

Spherical polycationic brushes, consisting of polystyrene particles with linear cationic macromolecules grafted onto their surfaces, were electrostatically complexed with small unilamellar anionic liposomes. Complexation was monitored using a multimethod approach that included laser electrophoresis, dynamic light scattering, fluorescence, cryogenic transmission electron microscopy, and conductivity. Liposomes adsorb onto the outer edges of the brushes rather than penetrate into their dense polycationic layer. The integrity of the liposomes remains unaltered when the liposomes reside on the polycationic brushes. The resulting complexes (roughly 40 liposomes per brush) do not dissociate into their components upon exposure to physiological solutions. The system is potentially useful in that liposomes are gathered into well-defined clusters with a high encapsulating potential. Multicomponent constructs can be easily prepared if polycationic brushes are allowed to bind to a mixture of liposomes that encapsulate different guests. This work provides an example of "systems chemistry" whereby as many as eight components, each with its own particular location and function (i.e., polystyrene core, polycationic graft, egg lecithin, cardiolipin, two fluorescent dyes, water, and buffer), collectively self-assemble.     

Synthesis of Biological Activities of Phosphorus-Containing Polycationic Strings

Abstract

Several series of phosphoruscontaining polycationic strings have been prepared. These include those in which quaternary phosphonium sites are located at regular intervals along a linear chain of defined length (“Strings”), and those in which the cationic phosphonium, sites are in linkages arrayed in branching arms about a cenhal focus unit (“baloons”). Polyphosphonium “balloon” arrays have been attached to a polystyrene backbone prowding a mataial which serves as an anionic exchange resin. PolyCationic strings have been prepared in which phosphorus is present a3 phosphine oxide functidties and the cationic sites are quatanary ammonium sites anayed at regular intervals along a linear chain of defined length. Several of the resultant materials have demonshated sigruficant antibaaaial activity. Interactions of the polycationic species with the anionic gmove region of double stranded DNA have been investigated.     

A Peanut‐Shaped Polyaromatic Capsule: Solvent‐Dependent Transformation and Electronic Properties of a Non‐Contacted Fullerene Dimer

Synthesis of molecular containers capable of incorporating multiple fullerenes remains challenging. Reported here is that room‐temperature mixing of metal ions with W‐shaped bispyridine ligands featuring polyaromatic panels results in the quantitative formation of a peanut‐shaped M₂L₄ capsule. The capsule reversibly converts into two molecules of an ML₂ double tube in response to changes in the solvent. Notably, the capsule allows the incorporation of two fullerene molecules into the connected two spherical cavities at room temperature. The close proximity yet non‐contact of the encapsulated C₆₀ molecules, with a separation of 6.4 Å, was revealed by X‐ray crystallographic analysis. The resultant, unusual fullerene dimer undergoes sequential reduction within the capsule to generate (C₆₀^.?)₂, C₆₀^.??C₆₀^2?, and (C₆₀^2?)₂ species. Furthermore, temperature‐controlled stepwise incorporation of two C₆₀ molecules into the capsule is demonstrated.     

Polycationic (mixed) core-shell dendrimers for binding and delivery of inorganic/organic substrates

The convergent synthesis of a series of polycationic aryl ether dendrimers has been accomplished by a convenient procedure involving quantitative quaternarization of aryl(poly)amine core molecules. The series has been expanded to the preparation of the first polycationic, mixed core-shell dendrimer. All these dendrimers consist of an apolar core with a peripheral ionic layer which is surrounded by a less polar layer of dendritic wedges. These cationic, macromolecular species have been investigated for their ability to form assemblies with (anionic) guest molecules. The results obtained from UV/Vis and NMR spectroscopies, and MALDI-TOF-MS demonstrate that all the cationic sites throughout the dendrimer core are involved in ion pair formation with anionic guests giving predefined guest/host ratios up to 24. The large NMR spectroscopic shifts of resonances correlated with the groupings located in the core of the dendrimers, together with the relaxation time data indicate that the anionic guests are associated with the cationic core of these dendrimers. The X-ray molecular structure of the octacationic, tetra-arylsilane model derivative [Si(C6H3[CH2NMe3](2)-3,5)4]8+. 8I- shows that the iodide counterions are primarily located near the polycationic sphere. The new polycationic dendrimers have been investigated for their catalytic phase-transfer behavior and substrate delivery over a nanofiltration membrane.     

A Polyaromatic Gemini Amphiphile That Assembles into a Well‐Defined Aromatic Micelle with Higher Stability and Host Functions

A gemini‐type amphiphilic molecule, constituted of two V‐shaped polyaromatic amphiphiles linked by a linear acetylene spacer, was synthesized. The gemini amphiphile assembles into a well‐defined aromatic micelle (ca. 2 nm in core diameter), providing higher stability in water even at low concentration (0.09 mm ) and high temperature (>130 °C). Unlike common gemini amphiphiles with aliphatic chains, the present amphiphile and its micellar assembly emit green and orange fluorescence (Φ_F=33 and 9 %), respectively. Despite strong and multiple π‐stacks of the polyaromatic panels of the amphiphiles, the water‐soluble gemini aromatic micelle incorporates medium‐size to large hydrophobic compounds into the frameworks. Interestingly, the guest binding capability toward large planar molecules was enhanced by more than two times through the pre‐encapsulation of spherical molecules in the cavity.     

N‐Doping of Polyaromatic Capsules: Small Cavity Modification Leads to Large Change in Host–Guest Interactions

To gain insight into the host functions of a nanocavity encircled by both polyaromatic panels and heteroatoms, nitrogen‐doped polyaromatic capsules were successfully synthesized from metal ions and pyridine‐embedded, bent anthracene‐based ligands. The new capsules display unique host–guest interactions in the isolated cavities, which are distinct from those of the undoped analogues. Besides the inclusion of Ag⁺ ions, the large absorption change of fullerene C₆₀ and altered emission of a BODIPY dimer are observed upon encapsulation by the present hosts. Moreover, the N‐doped capsule exhibits specific binding ability toward progesterone and methyltestosterone, known as a natural female and synthetic male hormone, respectively, in water.     

Polyelectrolyte complex membranes – surface and permeability properties

In order to study, how the membrane hydrophilicity influences the pervaporation (PV) separation properties in dehydration of alcohols, two polyelectrolyte complex (PELC) membranes, based on interfacial reaction of polyanionic sodium salt of sulfoethyl cellulose (SEC) with polycationic poly[dimethyl(diallyl)ammonium chloride] (pDMDAAC), or cationic surfactant benzyl(dodecyl)dimethylammonium chloride (BDDDMAC), were prepared and tested. Contact angle measurements on membrane surfaces made in various media showed that the membrane hydrophilicity, in the sense of water wettability, had not influence neither to flux nor selectivity in the PV dehydration process. On the contrary, the membrane wettability determined by contact angle measurements in the real water/alcohol separation mixture, correlated very well with the PV experiments. These findings are confronted with the solution-diffusion PV model.     

A Porous Polyaromatic Solid for Vapor Adsorption of Xylene with High Efficiency,Selectivity, and Reusability

Development of porous materials capable of capturing volatile organic compounds (VOCs), such as benzene and its derivatives, with high efficiency, selectivity, and reusability is highly demanded. Here we report unusual vapor adsorption behavior toward VOCs by a new porous solid, composed of a polyaromatic capsule bearing a spherical nanocavity with subnano-sized windows. Without prior crystallization and high-temperature vacuum drying, the porous polyaromatic solid exhibits the following five features: vapor adsorption of benzene over cyclohexane with 90 % selectivity, high affinity toward o-xylene over benzene and toluene with >80 % selectivity, ortho-selective adsorption ability (>50 %) from mixed xylene isomers, tight VOCs storage even under high temperature and vacuum conditions, and at least 5 times reusability for xylene adsorption. The observed adsorption abilities are accomplished at ambient temperature and pressure within 1 h, which has not been demonstrated by organic/inorganic porous materials reported previously.     

Cyclic monoterpenes trapped in a polyaromatic capsule: unusual selectivity,isomerization, and volatility suppression

Cyclic monoterpenes (CMTs) are intractable natural products with high volatility and strong odors so that there has been no molecular receptor capable of selectively and tightly trapping CMTs in both solution and the solid state. We herein report that a polyaromatic capsule acts as a functional nanoflask for CMTs with the following five features: (i) the capsule can selectively bind menthone from mixtures with other saturated CMTs in water. In contrast, (ii) treatment of the capsule with mixtures of menthone and π-conjugated CMTs gives rise to ternary host–guest complexes with high pair-selectivity. Notably, (iii) the encapsulated menthone displays unusual isomerization from a typical chair conformer to otherwise unstable conformers upon heating. (iv) The selective binding of volatilized CMTs is demonstrated by the capsule even in the solid state at atmospheric pressure. Furthermore, (v) the volatilities of CMTs are significantly suppressed at elevated temperatures by the capsule upon encapsulation in solution as well as in the solid state.

A polyaromatic capsule demonstrated its unique host functions toward cyclic monoterpenes, i.e., selective binding in water, pair-selective encapsulation, unusual isomerization, selective binding in the solid state, and remarkable volatility suppression.     

Recognition of Multiple Methyl Groups on Aromatic Rings by a Polyaromatic Cavity

The methyl group is a small substituent, usually showing relatively weak or no interactions with other functional groups and metal ions. Herein, we present the recognition of the number of methyl groups on synthetic and natural aromatic compounds (i.e., benzene and xanthine derivatives, respectively) by the 1 nm‐sized polyaromatic cavity of a coordination capsule in water. Detailed competitive encapsulation experiments as well as X‐ray crystallographic analysis revealed that multiple guest–host CH₃–polyaromatic interactions in the confined nanospace are key driving forces for the high selectivity.     

Hydrophilic Oligo(lactic acid)s Captured by a Hydrophobic Polyaromatic Cavity in Water

Biologically relevant hydrophilic molecules rarely interact with hydrophobic compounds and surfaces in water owing to effective hydration. Nevertheless, herein we report that the hydrophobic cavity of a polyaromatic capsule, formed through coordination‐driven self‐assembly, can encapsulate hydrophilic oligo(lactic acid)s in water with relatively high binding constants (up to K_a=3×10⁵ m ⁻¹). X‐ray crystallographic and ITC analyses revealed that the unusual host–guest behavior is caused by enthalpic stabilization through multiple CH–π and hydrogen‐bonding interactions. The polyaromatic cavity stabilizes hydrolyzable cyclic di(lactic acid) and captures tetra(lactic acid) preferentially from a mixture of oligo(lactic acid)s even in water.     

Anisotropic Expansion of an M2L4 Coordination Capsule: Host Capability and Frame Rearrangement

Anisotropic expansion of a spherical M₂L₄ coordination capsule through the elongation of the ligand led to a new M₂L′₄ capsule. The expanded capsule provides an elliptical cavity encircled by polyaromatic frameworks with large openings and thereby can encapsulate elliptical fullerene C₇₀ and monofunctionalized fullerene C₆₀ in high yields. In addition, selective formation of a new M₂L₂L′₂ capsule occurs by mixing the original M₂L₄ and expanded M₂L′₄ capsules in a 1:1 ratio upon addition of C₆₀ or monofunctionalized C₆₀ as a template molecule.     

CH-π Multi-Interaction-Driven Recognition and Isolation of Planar Compounds in a Spheroidal Polyaromatic Cavity

π-π Interactions are established as a powerful supramolecular tool, whereas the usability of CH-π interactions has been rather limited so far. Here we present (i) selective binding of planar polyaromatics and (ii) effective isolation of planar metal complexes by a polyaromatic capsule, utilizing multiple CH-π interactions. In the spheroidal cavity, one molecule of large and medium-sized polyaromatic molecules (i. e., coronene and pyrene) is exclusively bound from mixtures bearing the same number of aromatic CH groups. Theoretical studies reveal that multiple host-guest CH-π interactions (up to 32 interactions) are the predominant driving force for the observed selectivity. In addition, one molecule of planar metal complexes (i. e., porphine and bis(acetylacetonato) Cu(II) complexes) is quantitatively bound by the capsule through aromatic and aliphatic CH-π multi-interactions, respectively. The ESR and theoretical studies demonstrate the isolation capability of the capsular framework and an unusual polar environment in the polyaromatic cavity.     

Fast,Efficient and Low E‐Factor One‐Pot Palladium‐Catalyzed Cross‐Coupling of (Hetero)Arenes

The homocoupling of aryl halides and the heterocoupling of aryl halides with either aryl bromides or arenes bearing an ortho‐lithiation directing group are presented. The use of a Pd catalyst, in combination with t‐BuLi, allows for the rapid and efficient formation of a wide range of polyaromatic compounds in a one pot procedure bypassing the need for the separate preformation of an organometallic coupling partner. These polyaromatic structures are obtained in high yields, in 10 min at room temperature, with minimal waste generation (E‐factors as low as 1.5) and without the need for strict inert conditions, making this process highly efficient and practical in comparison to classical methods. As illustration, several key intermediates of widely used BINOL‐derived structures are readily prepared.     

Fast,Efficient and Low E‐Factor One‐Pot Palladium‐Catalyzed Cross‐Coupling of (Hetero)Arenes

The homocoupling of aryl halides and the heterocoupling of aryl halides with either aryl bromides or arenes bearing an ortho‐lithiation directing group are presented. The use of a Pd catalyst, in combination with t‐BuLi, allows for the rapid and efficient formation of a wide range of polyaromatic compounds in a one pot procedure bypassing the need for the separate preformation of an organometallic coupling partner. These polyaromatic structures are obtained in high yields, in 10 min at room temperature, with minimal waste generation (E‐factors as low as 1.5) and without the need for strict inert conditions, making this process highly efficient and practical in comparison to classical methods. As illustration, several key intermediates of widely used BINOL‐derived structures are readily prepared.     

Synthesis and Characterization of Highly Water-Soluble Dendrofulleropyrrolidine Bisadducts with DNA Binding Activity

The synthesis, characterization and DNA binding studies of a series of polycationic fullerene adducts are reported. These cationic species, exhibiting reasonably high water solubility and a heterogeneous distribution of positive charges, can efficiently complex plasmid DNA. Electrophoresis studies show different DNA binding efficiencies for different adducts, some of which can be considered excellent candidates for DNA binding therapies.     

Hydration of Polycationic [5]Radialene with Quintuple 1,3-Dithiol-2-ylidenes Leads to a New Class of π-Extended Tetrathiafulvalene Scaffold

[5]Radialene with quintuple 4,5-benzo-1,3-dithiol-2-ylidenes (DTs) easily forms a stable polycationic salt ( 1 )⁴⁺(BF₄⁻)₄ owing to its aromatic character in the central cyclopentadienide ring. In this work, it was found that the polycationic salt ( 1 )⁴⁺ underwent a hydration reaction in moist polar solvent to give several unexpected products, namely, an oxygen adduct dicationic salt ( 2 )²⁺, a tetrathiafulvalene (TTF) vinylogue ( 3 ) with 1,4-dithiine-2(3H)-one moieties, and an oxygen adduct of π-extended TTF with a cyclopentenone core ( 4 ). Their molecular structures were fully determined by X-ray crystal-structure analysis. In this reaction, irreversible hydration to the polycationic salt might either initiate the ring expansion and lead to the successive hydration at the specific cationic DT ring (for 3 ), or promote the transannular reactions to the next DT ring followed by elimination of the DT ring (for 4 ). Cyclic voltammetry and differential pulse voltammetry measurements for compound 3 indicated the occurrence of multi redox process resulting from electronic delocalization on the vinylogous TTF moiety. The electronic structures of the cationic species of 3 were also investigated by electronic spectra.     

Synthesis of cationic diacetylene‐co‐carbazole‐co‐fluorene polymers and their sensitive fluorescent quenching properties with DNA

Two neutral precursor conjugated copolymers based 2,7‐diethynylfluorene and 3,6‐diethynylcarbazole units in the main chain ( PFC and PF2C ) were prepared by Hay coupling polymerization. Their cationic copolymers ( CPFC and CPF2C ) were prepared by the methylation of their diethylpropylamino groups with CH₃I. For comparison, neutral conjugated homopolymers of 2,7‐diethynylfluorene ( PF ), 3,6‐diethynylcarbazole units ( PC ) and their cationic polymers ( CPF and CPC ) were also prepared with the same method. A comparative study on the optical properties of cationic polymers CPFC and CPF2C in DMF and DMF/H₂O showed that they underwent water‐induced aggregation. The spectral behaviors of CPFC and CPF2C with calf thymus DNA showed that a distinct fluorescent quenching took place with minute addition of CT DNA (3.3 × 10^?13 M). The results showed that the polymers would be promising biosensor materials for sensitive detection of DNA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4168–4177, 2010