前驱体法制备Mn_2O_3空心橄榄形结构及形貌演化

利用苹果酸还原高锰酸钾以水热合成方法制备了具有橄榄形貌的纳米结构MnCO3前驱体,通过600℃焙烧MnCO3前驱体得到橄榄形Mn2O3.以扫描电镜(SEM)、透射电镜(TEM)、X射线衍射(XRD)、热重-差热分析(TG-DTA)等方法对产物的形貌和结构进行了表征.考察了MnCO3前驱体微观形貌随水热反应时间的演变:当水热反应时间为2h时得到具有橄榄形形貌的MnCO3前驱体,空心结构的壁比较厚;当水热反应时间延长到6h时得到的MnCO3前驱体仍然具有橄榄形形貌,壁变薄;当反应时间延长到24h时得到的MnCO3前驱体仍然具有橄榄形形貌,并且壁非常薄.我们推测在Ostwald熟化机理作用下,空心橄榄形MnCO3前驱体随着反应时间的延长其壁逐渐由160nm演化为30nm.     

Facile Green Synthesis of Ni(OH)2@Mn3O4 Cactus-Type Nanocomposite: Characterization and Cytotoxicity Properties

In the present work, the facile eco-friendly synthesis and evaluation of the anti-tumor activity of Ni(OH)₂@Mn₃O₄ nanocomposite were carried out. The synthesis of Ni(OH)₂@Mn₃O₄ nanocomposite from chia-seed extract was mediated by sonication. The obtained materials were characterized by different spectroscopic techniques such as transmission electron microscopy (TEM), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible (UV-Vis), and Fourier transform infrared (FT-IR) spectroscopies. The results of XRD, SEM, EDS, TEM, FT-IR, and UV-Vis analysis indicate the successful manufacturing of a crystalline, cactus-type Ni(OH)₂@Mn₃O₄ nanocomposite of 10.10 nm average particle size. XPS analysis confirms that the synthesized materials consist mainly of Ni²⁺, Mn²⁺, and Mn³⁺. The antitumor activity of the nanocomposite was tested against a breast cancer (MCF-7) cell line. The results showed Ni(OH)₂@Mn₃O₄ nanocomposite possesses insignificant cytotoxicity. The cell-death percentage was 34% at a 100 ppm concentration of Ni(OH)₂@Mn₃O₄ nanocomposite. The obtained results imply that the synthesized nanocomposite could be suitable and safe for drug delivery and water treatment.     

NOx储存催化剂Pt/BaAl2O4-Al2O3的XAFS研究

采用共沉淀-浸渍法在不同载体焙烧温度下,制备了不同Al/Ba原子比的Pt/BaAl2O4-Al2O3系列样品.用XRD, XANES, EXAFS,以及NSC (NOx storage capacity）测定等手段对样品的微观结构和NOx储存性能进行了详细的表征.样品中Ba物种是以BaAl2O4和BaCO3两种混合物相的形式存在,且伴随着载体焙烧温度和Ba含量的降低, BaAl2O4物相的分散度变高, NOx储存活性也随之提高,这表明BaAl2O4相的分散度与样品的NOx储存性能密切相关,小颗粒的BaAl2O4相是NOx的主要储存活性中心.在样品中, Pt物种以金属原子簇形式存在,分散度很高,其Pt－Pt壳层配位数较标样Pt粉有显著下降, Pt－Pt键长变短,出现了纳米收缩现象.高分散的小颗粒金属Pt原子簇为捕获和氧化NOx的主要活性中心.     

Fabrication and Characterization of Nanocomposite Flexible Membranes of PVA and Fe3O4

Composite polymer membranes of poly(vinyl alcohol) (PVA) and iron oxide (Fe₃O₄) nanoparticles were produced in this work. X-ray diffraction measurements demonstrated the formation of Fe₃O₄ nanoparticles of cubic structures. The nanoparticles were synthesized by a coprecipitation technique and added to PVA solutions with different concentrations. The solutions were then used to generate flexible membranes by a solution casting method. The size and shape of the nanoparticles were investigated using scanning electron microscopy (SEM). The average size of the nanoparticles was 20±9 nm. Raman spectroscopy and Fourier-transform infrared spectroscopy (FTIR) were utilized to investigate the structure of the membranes, as well as their vibration modes. Thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) demonstrated the thermal stability of the membranes and the crystallinity degree. Electrical characteristics of the thin membranes were examined using impedance spectroscopy as a function of the nanoparticles’ concentrations and temperatures. The resistivity of the fabricated flexible membranes was possible to adjust by controlled doping with suitable concentrations of nanoparticles. The activation energy decreased with the nanoparticles’ concentrations due to the increase in charge carriers’ concentrations. Therefore, the fabricated membranes may be applied for practical applications that involve the recycling of nanoparticles for multiple application cycles.     

Reaction of NO at low temperature by ACF loading urea and rare-earth element oxides (La2O3, CeO2)

Loaded catalysts of 10–50% (w/w) urea loaded on activated carbon fibers (ACF), referred to as urea/ACF, and 10%urea–5–15% (w/w) La₂O₃/ACF and CeO₂/ACF were prepared by an impregnation method and used for removal of NO at low temperature (30–120°C). The experimental results showed that the catalytic activity of urea/ACF could be greatly improved by loaded rare-earth element oxides. Furthermore, 10%urea–5%La₂O₃/ACF and 10%urea–10%CeO₂/ACF could maintain high and stable catalytic activity at 100°C.     

Solvent-Free Synthesis of 2-Amino-3-aryl-5-substituted Thiophenes as Anti-inflammatory Agents using KF-Al2O3 under Microwave Irradiation

The synthesis of 2-amino-3-aryl-5-substituted thiophenes as anti-inflammatory agents catalyzed by KF-Al₂O₃ under microwave irradiation is reported.     

Synthesis and applications of mesoporous Cu-Zn-Al2O3 catalyst for dehydrogenation of 2-butanol

A series of mesoporous Cu-Zn-Al₂O₃ materials have been synthesized at ambient temperature and their structure was characterized by XRD, N₂ physical adsorption and TPR techniques. Their catalytic applications for the dehydrogenation of 2-butanol to methyl ethyl ketone (MEK) were evaluated in a fixed-bed flow reactor at atmospheric pressure. It is demonstrated from the XRD patterns that both the as-synthesized samples and calcined samples have the typical XRD patterns of meso-structured materials and the results of N₂O chemical adsorption showed that Cu was embedded in the framework of the mesoporous materials and homogeneously dispersed in the mesoporous Cu-Zn-Al₂O₃ materials. The catalytic activity of 2-butanol dehydrogenation was varied in the order of CZA(10)<CZA(CP)<CZA(20)<CZA(30); while the selectivity of MEK was increased in the order of CZA(CP)<CZA(10)<CZA(20)<CZA(30).     

CeO2-ZrO2-La2O3-Al2O3 composite oxide and its supported palladium catalyst for the treatment of exhaust of natural gas engined vehicles

Composite supports CeO2-ZrO2-Al2O3 (CZA) and CeO2-ZrO2-Al2O3-La2O3 (CZALa) were prepared by co-precipitation method. Palladium catalysts were prepared by impregnation and their purification ability for CH4, CO and NOx in the mixture gas simulated the exhaust from natural gas vehicles (NGVs) operated under stoichiometric condition was investigated. The effect of La2O3 on the physicochemical properties of supports and catalysts was characterized by various techniques. The characterizations with X-ray diffraction (XRD) and Raman spectroscopy revealed that the doping of La2O3 restrained effectively the sintering of crystallite particles, maintained the crystallite particles in nanoscale and stabilized the crystal phase after calcination at 1000 ℃. The results of N2-adsorption, H2-temperature-programmed reduction (H2-TPR) and oxygen storage capacity (OSC) measurements indicated that La2O3 improved the textural properties, reducibility and OSC of composite supports. Catalytic activity testing results showed that the catalysts exhibit excellent activities for the simultaneous removal of methane, CO and NOx in the simulated exhaust gas. The catalysts supported on CZALa showed remarkable thermal stability and catalytic activity for the three pollutants, especially for NOx. The prepared palladium catalysts have high ability to remove NOx, CH4 and CO, and they can be used as excellent catalysts for the purification of exhaust from NGVs operated under stoichiometric condition. They also have significant potential in industrial application because of their high performance and low cost.     

Straightforward Synthesis of Mn3O4/ZnO/Eu2O3-Based Ternary Heterostructure Nano-Photocatalyst and Its Application for the Photodegradation of Methyl Orange and Methylene Blue Dyes

Zinc oxide-ternary heterostructure Mn₃O₄/ZnO/Eu₂O₃ nanocomposites were successfully prepared via waste curd as fuel by a facile one-pot combustion procedure. The fabricated heterostructures were characterized utilizing XRD, UV–Visible, FT-IR, FE-SEM, HRTEM and EDX analysis. The photocatalytic degradation efficacy of the synthesized ternary nanocomposite was evaluated utilizing model organic pollutants of methylene blue (MB) and methyl orange (MO) in water as examples of cationic dyes and anionic dyes, respectively, under natural solar irradiation. The effect of various experimental factors, viz. the effect of a light source, catalyst dosage, irradiation time, pH of dye solution and dye concentration on the photodegradation activity, was systematically studied. The ternary Mn₃O₄/ZnO/Eu₂O₃ photocatalyst exhibited excellent MB and MO degradation activity of 98% and 96%, respectively, at 150 min under natural sunlight irradiation. Experiments further conclude that the fabricated nanocomposite exhibits pH-dependent photocatalytic efficacy, and for best results, concentrations of dye and catalysts have to be maintained in a specific range. The prepared photocatalysts are exemplary and could be employed for wastewater handling and several ecological applications.     

Reactions between YBa2Cu3O7−δ and La2O3 and SrCO3

Solid state reactions at 925°C between the high-T _c ceramic superconductor YBa₂Cu₃O_7?δ and La₂O₃ and SrCO₃, respectively, mixed in various molar ratiosr=MeO_n/YBa₂Cu₃O_7?δ, were studied using X-ray powder diffraction and scanning electron microscopy. The reaction between YBa₂Cu₃O_7?δ and La₂O₃ yielded (La_1?xBa_x)₂CuO_4?δ, withx≈0.075?0.10. La_2?xBa_1+xCu₂O_6?δ, withx≈0.2?0.25 and La-doped (Y_1?xLa_x)₂BaCuO₅, withx≈0.10?0.15. Forr=3.0, Y-doped La₂BaCuO₅ resulted also. The reaction between YBa₂Cu₃O_7?δ and SrCO₃ yielded (Sr_1?zBa_z)₂CuO₃, withz≈0.1, Y₂(Ba_1?zSr_z)CuO₅, withz=0.1?0.15, and a nonsuperconducting compound with an approximate composition of Y(Ba_0.5Sr_0.5)₅Cu_3.5O_10±δ. At values ofr≤2.0, unsubstituted YBa₂Cu₃O_7?delta was found in the reaction products.     

铕掺杂对Co3O4活化过一硫酸盐降解亚甲基蓝性能的增强

以Co （NO₃）₂和Eu （NO₃）₃为原料,采用草酸盐-热分解法制得了系列不同Co/Eu比例（n_Co/n_Eu）的多孔双金属复合氧化物催化剂,并对其活化过一硫酸盐（PMS）降解亚甲基蓝（MB）的性能进行对比评价。结果表明,按n_Co/n_Eu=9制得的材料（Co₉Eu₁）具有最为优异的活化PMS降解MB的性能。在温度为25℃、催化剂用量和PMS浓度分别为0.10 g·L^-1和0.6 mmol·L^-1的反应条件下,Co₉Eu₁/PMS体系对MB的降解率可达86.66%,而纯Co₃O₄催化下的MB降解率仅为52.62%。Co₉Eu₁出色的催化性能是由于Eu³⁺的缺电子特性增强了对吸附于催化剂表面PMS的极化而使其更易被主催化成分Co₃O₄活化。体系中阴离子C₂O₄^2-和HCO₃^-的存在对Co₉Eu₁/PMS氧化降解MB的性能具有明显抑制作用。猝灭实验和电子顺磁共振谱（EPR）证实Co₉Eu₁/PMS体系中同时存在SO₄^-·、·OH和·O₂^-三种自由基型活性物种以及¹O₂非自由基型活性物种,其中SO₄^-·对MB的氧化降解起关键作用。Co₉Eu₁具有良好的稳定性,在连续4次循环使用中其催化性能未见明显变化。     

La2O3对Ni/γ-Al2O3甲烷化催化剂的助催化作用

我国将稀土作为助剂引入镍基甲烷化催化剂,大大提高了催化剂的活性和热稳定性,并已投入工业应用［1－3］．稀土对不同镍催化剂反应性能及其作用机理的研究已有一些报导［3－7］．谢有畅等观察到镍负载在经单层La2O3改性的γ－Al2O3表面,其晶粒要比没有La2O3时小得多．Rotgerink等认为添加La后反应速率的增加不只是由于几何效应,而是La对甲烷化本身有促进作用,单位镍表面的活性是随La含量不同而改变的,活性增加的同时表观活化能也增加［5］．作为助剂的La2O3在氢还原和反应过程中的变化及其作用的研究和讨论较少,目前一般认为添…     

Sb2O3／TiO2纳米复合物的合成及性质研究

以改进的溶胶-凝胶法制备了Sb2O3／TiO2纳米复合物,用扫描电镜、X射线粉末衍射、傅立叶红外光谱、紫外-可见光谱以及荧光等测试技术对产物进行了分析和表征．结果表明：所得纳米复合物颗粒分散均匀,具有锐钛矿相结构,平均粒径约为10nm．还研究了所得产物的光催化性质、电化学性质及电化学发光行为．结果表明：Sb2O3的掺入可以提高TiO2的光催化效果,当反应物中m（Sb2O3）／m（TiO2）=10％时,所得纳米复合物对亚甲基蓝和罗丹明B的光催化效果最好．     

Carbon Dioxide Reforming of Methane over Ni Catalysts Supported on Al2O3 Modified with La2O3, MgO, and CaO

The preparation of synthesis gas from carbon dioxide reforming of methane (CDR) has attracted increasing attention. The present review mainly focuses on CDR to produce synthesis gas over Ni/MO_x/Al₂O₃ (X = La, Mg, Ca) catalysts. From the examination of various supported nickel catalysts, the promotional effects of La₂O₃, MgO, and CaO have been found. The addition of promoters to Al₂O₃-supported nickel catalysts enhances the catalytic activity as well as stability. The catalytic performance is strongly dependent on the loading amount of promoters. For example, the highest CH₄ and CO₂ conversion were obtained when the ratios of metal M to Al were in the range of 0.04–0.06. In the case of Ni/La₂O₃/Al₂O₃ catalyst, the highest CH₄ conversion (96%) and CO₂ conversion (97%) was achieved with the catalyst (La/Al = 0.05 (atom/atom)). For Ni/CaO/Al₂O₃ catalyst, the catalyst with Ca/Al = 0.04 (atom/atom) exhibited the highest CH₄ conversion (91%) and CO₂ conversion (92%) among the catalysts with various CaO content. Also, Ni/MgO/Al₂O₃ catalyst with Mg/Al = 0.06 (atom/atom) showed the highest CH₄ conversion (89%) and CO₂ conversion (90%) among the catalysts with various Mg/Al ratios. Thus it is most likely that the optimal ratios of M to Al for the highest activities of the catalysts are related to the highly dispersed metal species. In addition, the improved catalytic performance of Al₂O₃-supported nickel catalysts promoted with metal oxides is due to the strong interaction between Ni and metal oxide, the stabilization of metal oxide on Al₂O₃ and the basic property of metal oxide to prevent carbon formation.     

CuFe2O4 Nanoparticles: A Magnetically Recoverable and Reusable Catalyst for the Synthesis of Coumarins via Pechmann Reaction in Water

The synthesis of coumarins by hydroxyalkylation of phenols with ethyl acetoacetate (via Pechmann reaction) is attempted using magnetically separable and reusable CuFe₂O₄ nanoparticles in water.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications ^® for the following free supplemental resource(s): Full experimental and spectral details.]     

具有双孔径分布的介孔C-Al2O3-TiO2纳米复合材料的合成及其红外发射率

以嵌段共聚物F127 (PEO₁₀₆PPO₇₀PEO₁₀₆, M_W=12600)为模板剂, 异丙醇铝和钛酸四丁酯为金属源, 低分子量的酚醛树脂为碳源, 通过溶胶-凝胶三元共组装法合成了具有双孔径分布的C-Al₂O₃-TiO₂纳米复合材料.用X射线衍射(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)及N₂吸附-脱附对该复合材料进行结构表征. 结果显示, 当铝钛原子的摩尔比为1:10 时, 对应的纳米复合材料具有较好的有序介孔结构, 其双孔径分别为3.9和6.5 nm, 比表面积可达259 m²·g^-1, 孔容0.37 cm³·g^-1. 以三元乙丙橡胶(EPDM)为粘结剂, 与介孔纳米复合材料混合制备涂层. 通过调节复合材料中铝钛摩尔比和涂层厚度, 红外发射率在0.450-0.617之间可调.     

负载于HZSM-5上的CuO-ZnO-Al2O3纳米粒子：尿素－硝酸盐燃烧合成和理化表征

用尿素-硝酸盐燃烧法制备了一系列的负载于HZSM-5上的CuO-ZnO-Al2O3纳米复合材料(CZA/HZSM-5)。研究了燃料与氧化物的比率对所合成的复合材料的理化性质的影响。用TGA/DTG,FTIR和XRD等研究了尿素-硝酸盐凝胶的热分解和煅烧粉体的相演变过程。FESEM结果表明在燃烧过程中燃料的用量对CZA/HZSM-5的性质有重大影响。CuO和ZnO的晶粒首先随尿素量的增加而增大,然后随尿素量的增加而减小。CuO和ZnO的相对结晶度随燃料量的增加表现为非单调趋势。随着燃料与硝酸盐的比率的增加,CZA/HZSM-5不仅形貌变得超细和均一,而且表面孔隙率也显著增加。FTIR结果表明HZSM-5的结构甚至在负载了CuO-ZnO-Al2O3纳米粒子后也未被破坏,而且在CuO和ZnO与HZSM-5之间还有表面的键合。TGA/DTG结果指出燃烧合成法是一种由若干过程组合起来的方法,例如前驱体的热分解和前驱体间的放热反应等。另外,提出了CuO-ZnO-Al2O3负载在HZSM-5上的生成机理。     

Al2O3/MeSO3H (AMA) as a New Reagent for the Thia-Fries Rearrangement of Arylsulfonates to Hydroxyaryl Sulfones

A new facile method for thia-Fries rearrangement of arylsulfonates has been developed. A variety of arylsulfonates rearrange in excellent yields in the presence of Al₂O₃/MeSO₃H as a new reagent without the use of any solvent.     

纳米γ-Fe2O3粉体的合成与磁性增强研究

采用微乳法合成出氧化铁的前驱体——纳米β-FeOOH, 分别以β-FeOOH与添加剂壬基酚聚氧乙烯醚(NP-4)以物质量的比(n)为4, 5, 100添加NP-4, 混合煅烧. 采用拉曼光谱分析了样品中炭含量及分布, 并且用透射电镜观测产物的形貌和粒径, 采用磁强计观测产物磁性的变化. 结果得出, 对n＝5或破乳所得凝胶煅烧, 所得样品皆为分散均匀的四方形颗粒状, 且为磁性明显增强的纳米氧化铁γ-Fe₂O₃. 还分别讨论了样品中炭含量以及颗粒形状对比饱和磁化强度σ_s、矫顽力、矩形比的影响.