Recent advances in starch–clay nanocomposites

Biological nanocomposites are a valuable addition to the existing nanocomposite materials and eventually can substitute petroleum-based composite materials in numerous applications due to their inherent advantages such as biodegradability, eco-friendliness, low cost, and easy availability to name a few. Recently, polymer–clay nanocomposites have achieved much more attention due to their enhanced properties such as size dispersion and significant enhancement in physicochemical and mechanical properties in comparison to the pure polymer systems. Among various biopolymers, starch is one of the most abundant natural polymers on the earth and is highly valuable due to its chemical and physical properties. Starch polymer has highly increased potential as an alternative to petroleum-based materials. However, starch cannot be used alone and starch–clay nanocomposite has emerged as a new potential green sustainable material. This article focuses on recent progress in starch-based nanocomposites with particular emphasis on starch–clay nanocomposite preparation, properties, and applications.     

Mushroom-Derived Novel Selenium Nanocomposites’ Effects on Potato Plant Growth and Tuber Germination

Multicomponent materials, where nanosized selenium (Se) is dispersed in polymer matrices, present as polymer nanocomposites (NCs), namely, selenium polymer nanocomposites (SeNCs). Selenium as an inorganic nanofiller in NCs has been extensively studied for its biological activity. More ecologically safe and beneficial approaches to obtain Se-based products are the current challenge. Biopolymers have attained great attention with perspective multifunctional and high-performance NCs exhibiting low environmental impact with unique properties, being abundantly available, renewable, and eco-friendly. Composites based on polysaccharides, including beta-glucans from edible and medicinal mushrooms, are bioactive, biocompatible, biodegradable, and have exhibited innovative potential. We synthesized SeNCs on the basis of the extracellular polysaccharides of several medicinal mushrooms. The influence of bio-composites from mushrooms on potato plant growth and tuber germination were studied in two potato cultivars: Lukyanovsky and Lugovskoi. Bio-composites based on Grifola umbellata demonstrated the strongest positive effect on the number of leaves and plant height in both cultivars, without negative effect on biomass of the vegetative part. Treatment of the potato tubers with SeNC from Gr. umbellata also significantly increased germ length. Potato plants exposed to Se-bio-composite from Ganoderma lucidum SIE1303 experienced an increase in the potato vegetative biomass by up to 55% versus the control. We found earlier that this bio-composite was the most efficient against biofilm formation by the potato ring rot causative agent Clavibacter sepedonicus (Cms). Bio-composites based on Pleurotus ostreatus promoted increase in the potato root biomass in the Lugovskoi cultivar by up to 79% versus the control. The phytostimulating ability of mushroom-based Se-containing bio-composites, together with their anti-phytopathogenic activity, testifies in favor of the bifunctional mode of action of these Se-biopreparations. The application of stimulatory green SeNCs for growth enhancement could be used to increase crop yield. Thus, by combining myco-nanotechnology with the intrinsic biological activity of selenium, an unexpectedly efficient tool for possible applications of SeNCs could be identified.     

Preparation of waterborne polyurethane nanocomposites: Polymerization from functionalized hydroxyapatite

We report the preparation and characterization of waterborne polyurethane (WBPU)/hydroxyapatite (HAp) nanocomposites through in situ polymerization from functionalized HAp. The HAp nanoparticles (HAp NPs) were urethanated with 3-isocyanatemethyl-3,5,5-trimethyl-cyclohexylisocyanate (isophorone diisocyanate) to obtain grafted HAp NPs containing isocyanate groups (HAp-g-NCO) as crosslinkers and then the HAp-g-NCO is further polymerized with WBPU monomers to form the WBPU/HAp nanocomposites. The HAp NPs were homogeneously dispersed in the polyurethane matrix at low loading levels (?2.0 wt%), thus the mechanical strength and the elongation at break of the WBPU/HAp nanocomposites were significantly improved. Thermal stability and water resistance of the WBPU/HAp nanocomposites are also enhanced. These results suggest that the WBPU/HAp nanocomposites prepared by in situ polymerization hold the potential as new materials with improved mechanical properties, thermal stability and water resistance.     

粒子-聚合物相互作用与粒子-粒子相互作用对聚合物基纳米复合物力学性能的影响

聚合物基纳米复合物(PNCs)具有比传统高分子材料更加优异的光学、力学、热力学等性能,广泛应用于各个工程领域.而纳米粒子(NPs)对材料性能提高的机理则是当前聚合物纳米复合物领域研究的重要问题,聚合物纳米复合体系相互作用的影响因素众多,至今尚未明确并完整建立复合体系相互作用与性能增强之间的关系.本文总结了近年来关于纳米粒子填充聚合物基体力学性能的研究,从粒子-聚合物相互作用和粒子-粒子相互作用角度阐述了聚合物纳米复合体系力学性能的增强机理,并根据体系中不同的结构关系分别总结了聚合物/未改性纳米粒子复合体系和聚合物/聚合物接枝纳米粒子复合体系中影响力学性能的因素.该部分内容具有重要的理论和实践意义,有助于构建复合体系微观结构与宏观性能之间的关系,进而对微观层面调控PNCs的力学性能提供指导.     

Catalytic activity of novel thermoplastic/cellulose-Au nanocomposites prepared by cryomilling

Due to environmental concerns, increasing attention has been focused on the application and preparation of biobased polymers and their blends. In this study, cellulose, the most spread biopolymer on Earth, was used in the preparation of novel cotton/polypropylene-Au and cotton/polyethylene-Au nanocomposites via a green mechanochemical approach. First, mechanoradicals were generated by ball milling of the cotton and thermoplastics under cryo conditions, and then, these radicals were used in the reduction of Au ions to Au nanoparticles (Au NPs). Nanocomposites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The application of mechanochemistry in obtaining the cotton/thermoplastic blends allowed homogenous and fine blending of the samples and in addition, excluded the usage of toxic solvents. Since Au NPs exhibit a wide range of applications, e.g., in catalysis, cotton/thermoplastic-Au nanocomposites were used to catalyze the reduction reaction of 4-nitrophenol to
4-aminophenol, followed by UV-Vis spectroscopy. Finally, the hydrophobicity of the nanocomposites was alternated by tuning the blend composition. In the prepared nanocomposites, cotton and thermoplastics acted as very good supporting matrices for the Au NPs and provided satisfactory access to the NPs.     

An overview of boron nitride based polymer nanocomposites

Recently, boron nitride (BN) based materials have received significant attention in both academic and industrial sectors due to its interesting properties like large energy band gap, good resistance to oxidation, excellent thermal conductivity, thermal stability, chemical inertness, significant mechanical property and widespread applications. This review article deals with the preparation and properties of boron nitride and its nanocomposites with various polymers. Diverse polymers have been explored for the preparation of boron nitride filled polymer nanocomposites by adopting different mixing methods. Properties of the resulting polymer nanocomposites mainly depend up on filler size and dispersion, mixing conditions and type of interaction between polymer matrix and the filler. Herein, the structure, preparation and properties of various boron nitride based polymer nanocomposites are reviewed in detail along with a brief overview of different classes of BN nanomaterials.     

Cu2SnSe3-Ag纳米复合物的合成及其热电性质研究

采用Schlenk line技术,通过一种简单的硒源热注射的方法合成了Cu_2SnSe_3(CTSe)纳米晶,同时采用胶体法得到了单分散性极好的、粒径为4nm左右的Ag纳米颗粒(Ag NPs),之后通过简单的滴加法向CTSe纳米晶基质中掺入了特定比例的Ag NPs,得到CTSe-Ag纳米复合物。通过X射线粉末衍射、透射电镜、高分辨透射电镜、红外光谱和热重分析等表征了样品的组成、结构和形貌。同时对合成样品的热电性质进行了研究,相关的测试结果表明,以CTSe为基体掺杂AgNPs的样品中,CTSe-1(mol)%Ag具有最佳的热电优值(ZT=0.23,655K),相较纯相CTSe(ZT=0.18,655K)提高了27%。     

Functional nanocomposites for energy storage: chemistry and new horizons

Energy storage devices are one of the hot spots in recent years due to the environmental problems caused by the large consumption of unsustainable energy such as petroleum or coal. Capacitors are a common device for energy storage, especially electrical energy. A variety of types including electrolytic capacitors, mica capacitors, paper capacitors, ceramic capacitors, film capacitors, and non-polarized capacitors have been proposed. Their specific applications depend on their intrinsic properties. Dielectric capacitors have reasonable energy storage density, with current research focusing on the enhancement of energy density and making the materials more flexible as well as lightweight. Improvement strategies are based on the premise that use of two or more different materials (e.g. polymers and ceramics/metals) at an optimal formulation can result in properties that combine the advantages of the precursor materials. Different polymers especially fluoropolymers (e.g. PVDF and PVDF based co-polymer) are the main components in dielectric nanocomposites for capacitors with high energy storage performance. In this article, we have briefly summarized the recent advances in functional polymers nanocomposites for energy storage applications with a primary focus on polymers, surface engineering, functional groups and novel synthesis/manufacturing concepts applied to new materials. The article presents a unique integrated structure and approaches providing key knowledge for the design and development of novel, low-cost, multifunctional next-generation energy storage materials with improved efficiency.     

Efficient detection of CO2 by nanocomposites: Environmental and energy technologies

Nanocomposite materials have received much attention from scientists and engineers interested in the detection and photoreduction of CO₂ compounds. Their interest is due in large part to the unique properties of these materials, including their high degree of photoactivity, thermal stability, high surface area, and malleability. In the present review, we focus on several nanocomposite types used for the detection and photochemical reduction of CO₂: titania-based nanocomposites, chalcogenide-based nanocomposites, LDHs-based nanocomposites, and MOFs-based nanocomposites. More specifically, trends in green synthesis nanocomposites, methods for detecting CO₂ compounds, and the photoreduction of those compounds are summarized in this paper. Several modified approaches to nanocomposite materials have been discussed to achieve optimum results. Generally, we find that the presence of functional active groups, doping metal, and other semiconductor materials act as catalysts, significantly enhancing the photoreduction properties of nano-materials. Moreover, we will also discuss additional challenges, especially in regard to large-scale industrial applications. In our discussion, we will highlight the use of nanocomposite-based materials in the detection and photoreduction of CO₂. It is hoped that our findings will serve as a reference and inspiration for academic researchers and industrial professionals.     

Design and fabrication of thermally stable nanoparticles for well-defined nanocomposites

The nanocomposites consisted of polymer and nanoparticles (NPs) have been regarded as one of core materials in the nanotechnology. From the practical viewpoint, the heat treatment is often required in many nanocomposite fabrication processes. However, some NPs such as gold NPs exhibit the low thermal stability due to the dissociation of ligands from the nanoparticle surface at elevated temperature, limiting their use in many applications. Herein, we provide an overview of the recent efforts in strategies for the design and fabrication of inorganic NPs which have enhanced thermal stability. The recent investigation on the phase behavior of thermally stable NPs within the polymer matrices (polymer blends and block copolymer), morphologies of nanocomposites induced by NPs, and examples of their applications are also discussed. These approaches may provide useful strategy to employ the NPs for the fabrication of nanocomposites in diverse applications especially where heat treatment are required. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Biomaterials of Poly(vinyl alcohol) and Natural Polymers

Polysaccharides and proteins are abundantly found in nature and are highly recommended for developing eco-friendly materials due to their special properties (biodegradability, biocompatibility, non-toxicity, low cost, etc.). However, they sometimes fail to meet specific requirements due to poor mechanical and physical properties. Poly(vinyl alcohol) (PVA) is one of the promising synthetic polymers with superior properties that can be blended with natural polymers for obtaining novel biomaterials with improved performances. This review addresses recent advance in PVA/polysaccharides and PVA/proteins biocomposites design and fabrication, mainly for the past two decades.     

新型抗菌高分子及其抗菌策略的研究进展

抗菌高分子具有丰富的分子结构和独特的抗菌机制。同时,对微生物具有低耐药性的倾向。这些特点使新型高分子材料在抗菌领域受到人们越来越多的关注。本文首先分析了细菌产生耐药性的原因及由其带来的严峻医学和社会问题;然后系统梳理并探讨了新型抗菌高分子材料（如树状大分子、嵌段共聚物、壳聚糖及其衍生物和抗菌高分子/纳米复合材料等）的结构特点和抗菌机理;最后展望了未来新型功能高分子在抗菌领域的重点延伸及探索方向。     

Spin-crossover nanoparticles and nanocomposite materials

This contribution reports on the state of the art of the elaboration and the application of nanoparticles (NPs) and nanohybrid/nanocomposite materials based on spin-crossover (SCO) complexes. The first part of this review concerns the syntheses and the characterizations of the physical properties of SCO NPs. All of the methods including homogeneous and heterogeneous media syntheses developed for the elaboration of such NPs and the associated methods used for their morphological characterization are presented. A particular attention is paid on the effects of the size reduction and the influence of the environment on the SCO properties and to specific and recent remarkable advanced physical measurements realized on a batch of NPs or on an isolated object. The second part presents the elaboration of various nanocomposite or nanohybrid materials for which SCO NPs have been associated with magnetic entities, noble metals, different fluorescent dyes, and different active polymers with the objectives to go toward specific applications based on synergistic effects between the two components.     

Electroconductive Green Metal-polyaniline Nanocomposites: Synthesis and Application in Sensors

Polyaniline (PANI) is one of the most extensively used conducting polymer due to its fascinating properties including conducting, thermal, optical, magnetic and electrochemical properties, simple synthesis procedure and low cost of monomer. It has attracted major attention in a variety of applications including electrochemical sensors, catalysts, supercapacitors and biosensors. However, its limitations such as insolubility in common solvents, low process-ability and poor mechanical properties have led to the development of new approaches to improve it properties. Metal nanoparticles (MNPs) such as silver, gold, copper and palladium have been combined with PANI to improve on its properties which has led to a new class of materials known as metal/PANI nanocomposites. These hybrid nanocomposites incorporate advantages of both MNPs and polymers which effectively improves the properties of the individual materials. Various synthesis techniques including in situ polymerization, ɤ-radiolysis, electrodeposition, complexation, vacuum deposition and interfacial polymerization have been used in the formation of metal/PANI nanocomposites. These nanocomposites have been used in various sensor and biosensor applications due to their excellent conductivity, ease of synthesis, excellent redox potentials, chemical and thermal stability. This review highlights the various metal/PANI nanocomposites, their various synthesis techniques and their application in sensors and biosensors. The importance of these nanocomposites in sensing and signaling various toxic heavy metals such as mercury, lead and silver and toxic gases such as hydrogen sulphide, ammonia and chloroform has been discussed. In addition the review covers the applications of metal/PANI nanocomposites in biosensor systems for the detection of glucose, DNA, protein, cholesterol, drugs and hydrogen peroxide.     

Recent Progress in the Development of Conducting Polymer‐Based Nanocomposites for Electrochemical Biosensors Applications: A Mini‐Review

Among various immobilizing materials, conductive polymer‐based nanocomposites have been widely applied to fabricate the biosensors, because of their outstanding properties such as excellent electrocatalytic activity, high conductivity, and strong adsorptive ability compared to conventional conductive polymers. Electrochemical biosensors have played a significant role in delivering the diagnostic information and therapy monitoring in a rapid, simple, and low cost portable device. This paper reviews the recent developments in conductive polymer‐based nanocomposites and their applications in electrochemical biosensors. The article starts with a general and concise comparison between the properties of conducting polymers and conducting polymer nanocomposites. Next, the current applications of conductive polymer‐based nanocomposites of some important conducting polymers such as PANI, PPy, and PEDOT in enzymatic and nonenzymatic electrochemical biosensors are overviewed. This review article covers an 8‐year period beginning in 2010.     

An Overview of Linear Dielectric Polymers and Their Nanocomposites for Energy Storage

As one of the most important energy storage devices, dielectric capacitors have attracted increasing attention because of their ultrahigh power density, which allows them to play a critical role in many high-power electrical systems. To date, four typical dielectric materials have been widely studied, including ferroelectrics, relaxor ferroelectrics, anti-ferroelectrics, and linear dielectrics. Among these materials, linear dielectric polymers are attractive due to their significant advantages in breakdown strength and efficiency. However, the practical application of linear dielectrics is usually severely hindered by their low energy density, which is caused by their relatively low dielectric constant. This review summarizes some typical studies on linear dielectric polymers and their nanocomposites, including linear dielectric polymer blends, ferroelectric/linear dielectric polymer blends, and linear polymer nanocomposites with various nanofillers. Moreover, through a detailed analysis of this research, we summarize several existing challenges and future perspectives in the research area of linear dielectric polymers, which may propel the development of linear dielectric polymers and realize their practical application.     

Silver polymeric nanocomposites as advanced antimicrobial agents: classification, synthetic paths, applications, and perspectives

Utilization of metallic nanoparticles in various biotechnological and medical applications represents one of the most extensively investigated areas of the current materials science. These advanced applications require the appropriate chemical functionalization of the nanoparticles with organic molecules or their incorporation in suitable polymer matrices. The intensified interest in polymer nanocomposites with silver nanoparticles is due to the high antimicrobial effect of nanosilver as well as the unique characteristics of polymers which include their excellent structural uniformity, multivalency, high degree of branching, miscellaneous morphologies and architectures, and highly variable chemical composition. In this review, we explore several aspects of antimicrobial polymer silver nanocomposites, giving special focus to the critical analysis of the reported synthetic routes including their advantages, drawbacks, possible improvements, and real applicability in antibacterial and antifungal therapy. A special attention is given to "green" synthetic routes exploiting the biopolymeric matrix and to the methods allowing preparing magnetically controllable antimicrobial polymers for targeting to an active place. The controversial mechanism of the action of silver against bacteria, fungi and yeasts as well as perspectives and new applications of silver polymeric nanocomposites is also briefly discussed.     

Multifunctional micro-/nanoscaled structures based on polyaniline: an overview of modern emerging devices

With the advent of Materials Science-based technological advances, the fabrication of materials that could simultaneously exhibit both mechanical and processing properties of polymers and unique electrical characteristics of metals is a requirement with prior mandate. With the development of conducting polymers, great opportunities have been established, and novel devices with the significant features have emerged. Polyaniline (PANI) and its derivatives have attracted immense attention because of their fascinating properties, including high conductivity, inexpensiveness of starting material, unique redox behavior, facile synthesis, tunable properties, appropriate electrochemical and environmental stability, and strong bimolecular interactions. Nanostructures based on PANI have shown improved functionalities in various applications. In this article, different synthesis strategies such as interfacial polymerization, microwave-assisted polymerization, and sonochemical polymerization among others have been summarized. Besides, PANI-based nanocomposites and their various industrial, as well as biomedical applications in supercapacitors, batteries, gas vapor sensors, printable electronics, electrochromics, actuators, electrostatic dissipation, electromagnetic interference shielding, corrosion protection, filtration membranes, microbial fuel cell, biosensors, tissue engineering, and drug delivery systems, have been discussed in detail.     

Poly(vinyl alcohol) Chains Grafted onto the Surface of Copper Oxide Nanoparticles: Application in Synthesis and Characterization of Novel Optically Active and Thermally Stable Nanocomposites Based on Poly(amide-imide) Containing N-trimellitylimido-L-valine Linkage

Green polymer nanocomposites (NCs) show unique properties of combining the advantages of nanofillers and organic polymers. In this study, in order to control the dispersion of nanoparticles (NPs) in a polymer matrix, first, poly(vinyl alcohol) (PVA) as a green modifier was grafted on the surface of the CuO NPs to obtain CuO-PVA nanohybrid. Then poly(amide-imide) (PAI) was synthesized by the direct step growth polymerization of N-trimellitylimido-L-valine and 4,4′-methylenebis(3-chloro-2,6-diethylaniline) in ionic liquid medium. Finally, CuO-PVA hybrids were incorporated into the PAI matrix using ultrasonic technique for the preparation of PAI/CuO-PVA NCs. The obtained PAI/CuO-PVA NCs were characterized by different methods. The results of thermogravimetric analysis showed that thermal stability of the NCs was enhanced by incorporation of CuO-PVA nanohybrid compared to the pure PAI.     

Industrially produced PET nanocomposites with enhaced properties for food packaging applications

Gas permeation of polymers is one of the important factors to be considered in the selection of materials for many packaging applications, such as modified atmosphere packaging (MAP) for foods. Poly (ethylene therephthalate) (PET) is known to exhibit very low gas permeation compared with most polymers such as polystyrene, polyethylene and polypropylene. However, MAP applications require better barrier performance than that of PET. In the present work PET trays reinforced with organically modified sepiolite, fibrillar nanoclay, have been produced at industrial processes. Permeability to water vapour, oxygen and carbon dioxide has been studied in PET nanocomposites as well as their microstructure through transmission electron and scanning electronic microscopy (TEM and SEM), and their mechanical properties. Results show a better performance in barrier properties as well as an increase in tensile strength, and impact resistance when the sepiolite content is lower than 2.5%.