Sensing behaviors of polypyrrole nanotubes prepared in reverse microemulsions: effects of transducer size and transduction mechanism

Polypyrrole (PPy) nanotubes with different diameters were readily fabricated using cylindrical micelle templates in sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse microemulsions. Interestingly, Raman spectroscopy and ultraviolet (UV)-visible spectroscopy revealed that the PPy nanotubes with smaller diameters had a more extended conjugation length as well as a higher oxidation level. The PPy nanotubes were deposited onto a microelectrode array and were exposed to chemical vapor and electromagnetic radiation: typically, NH(3) vapor and UV light were chosen. The electrical response of PPy nanotubes to two different kinds of analytes was strongly dependent on their diameters. Moreover, since the small dimensions of PPy nanotubes facilitated the interaction between nanotubes and analytes, the PPy nanotube sensors showed conspicuously enhanced responses compared with conventional PPy.     

Facile fabrication of polypyrrole nanotubes using reverse microemulsion polymerization

Polypyrrole (PPy) nanotubes have been fabricated by reverse microemulsion polymerization in an apolar solvent, and factors affecting the formation of PPy nanotubes have also been investigated.     

An example of how to use AOT reverse micelle interfaces to control a photoinduced intramolecular charge-transfer process

6-Propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe due to its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer (ICT) states which can be particularly useful as sensors. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES), and time-resolved area normalized emission (TRANES) spectroscopies on PRODAN dissolved in nonaqueous reverse micelles. The reverse micelles are composed of polar solvents/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane. Sequestered polar solvents included ethylene glycol (EG), propylene glycol (PG), glycerol (GY), formamide (FA), dimethylformamide (DMF), and dimethylacetamide (DMA). The experiments were performed with varying surfactant concentrations at a fixed molar ratio W(S) = [polar solvent]/[AOT]. In every reverse micelle studied, the results show that PRODAN undergoes a partition process between the external solvent and the reverse micelle interface. The partition constants, K(p), are quantified from the changes in the PRODAN emission and/or absorption spectra with the surfactant concentration. The K(p) values depend strongly on the encapsulated polar solvent and correlate quite well with the AOT reverse micelle interface's zones where PRODAN can exist and emits. Thus, the partition toward the reverse micelle interface is strongly favored in DMF and DMA containing micelles where the PRODAN emission comes only from an ICT state. For GY/AOT reverse micelles, the K(p) value is the lowest and only emission from the local excited (LE) state is observed. On the other hand, for EG/AOT, PG/AOT, and water/AOT reverse micelles, the K(p) values are practically the same and emission from both states (LE and ICT) is simultaneously detected. We show here that it is possible to control the PRODAN state emission by simply changing the properties of the AOT reverse micelle interfaces by choosing the appropriate polar solvent to make the reverse micelle media. Indeed, we present experimental evidence with the answer to the long time question about from which state does PRODAN emit, a process that can be controlled using the unique reverse micelle interfaces properties.     

反胶团中漆树酶催化氧化性能与反应产物鉴定

研究了漆树酶在AOT/正辛烷/水反胶团中邻氨基苯酚的催化氧化性能。发现在40℃、pH=7.6、R=[H₂O]/[AOT]≈18的条件下,漆树酶的活力最高,在含水量较低的反胶团中较稳定。当R=6.2,于30℃保存15h活力仍保持82%;"水池"内存在的1.0×10^-3mol/L的Zn²⁺、Fe³⁺、Mg²⁺等离子对漆树酶有一定的抑制作用。漆树酶对邻氨基苯酚在反胶团和水溶液介质中,其主要氧化产物均为2-氨基-吩嗪-3-酮,但在反胶团中其反应产率比在水溶液中约高0.5倍。     

Solvent effects on AOT reverse micelles in liquid and compressed alkanes investigated by neutron spin-echo spectroscopy

Neutron Spin-Echo (NSE) spectroscopy has been employed to study the interfacial properties of reverse micelles formed with the common surfactant sodium bis-2-ethylhexyl-sulfosuccinate (AOT) in liquid alkane solvents and compressed propane. NSE spectroscopy provides a means to measure small energy transfers for incident neutrons that correspond to thermal fluctuations on the nanosecond time scale and has been applied to the study of colloidal systems. NSE offers the unique ability to perform dynamic measurements of thermally induced shape fluctuation in the AOT surfactant monolayer. This study investigates the effects of the bulk solvent properties, water content, and the addition of octanol cosurfactant on the bending elasticity of AOT reverse micelles and the reverse micelle dynamics. By altering these solvent properties, specific trends in the bending elasticity constant, k, are observed where increasing k corresponds to an increase in micelle rigidity and a decrease in intermicellar exchange rate, k(ex). The observed corresponding trends in k and k(ex) are significant in relating the dynamics of microemulsions and their application as a reaction media. Compressed propane was also examined for the first time with a high-pressure, compressible bulk solvent where variations in temperature and pressure are used to tune the properties of the bulk phase. A decrease in the bending elasticity is observed for the d-propane/AOT/W = 8 reverse micelle system by simultaneously increasing the temperature and pressure, maintaining constant density. With isopycnic conditions, a constant translational diffusion of the reverse micelles through the bulk phase is observed, conforming to the Stokes-Einstein relationship.     

基于PAA——PAN嵌段共聚物胶束制备磁性碳纳米粒子

本文采用原子转移自由基聚合方法合成了聚丙烯酸叔丁酯-聚丙烯腈嵌段共聚物(PtBA-b-PAN), 酸解得到聚丙烯酸-聚丙烯腈两亲嵌段共聚物(PAA-b-PAN). 随后, PAA-b-PAN嵌段共聚物在水溶液中自组装形成以PAA为壳, PAN为核的胶束. 用此胶束为模板, 加入FeCl₃溶液后得到了壳层负载Fe³⁺的聚合物纳米粒子, 经230 ℃空气中预氧化, 600 ℃氮气氛煅烧, 得到了核壳结构的, 具有磁性的碳纳米粒子. 用1H NMR, IR, GPC, TGA, TEM, XRD, AGM等技术对嵌段共聚物及纳米粒子进行了表征, 结果表明纳米粒子的壳层含γ-Fe₂O₃, Fe_2.5C混合物, 核含碳, 直径为35 ± 5 nm, 饱和磁化强度为2.16 emu/g. 在分离、吸波和传感器等方面具有潜在的应用前景.     

New reverse micelle surfactant systems optimized for high-resolution NMR spectroscopy of encapsulated proteins

Sodium bis(2-ethylhexyl)sulfosuccinate (AOT) is a surfactant commonly used to encapsulate water soluble proteins within the aqueous core of a reverse micelle. In the context of high-resolution NMR studies of encapsulated proteins the size of the resulting reverse micelle is critically important. We have designed and synthesized a short AOT analogue, 3,3-dimethyl-1-butylsulfosuccinate sodium salt and determined that it is able to form reverse micelles and to encapsulate the protein ubiquitin with high structural fidelity. AOT is often found to significantly destabilize encapsulated proteins, largely through charge-charge interactions between the anionic headgroup and the surface of the protein. Here we demonstrate, for the first time, that proportional mixtures of anionic and cationic surfactants can form reverse micelles that are also capable of protein encapsulation with high fidelity.     

Physicochemical investigation of the solubilization of ytterbium nitrate in AOT reverse micelles and liquid crystals

A wide investigation of the solubilization of the water-soluble salt Yb(NO₃)₃ in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles and AOT liquid crystals has been carried out. After saturation of water/AOT/organic solvent w/o microemulsions with pure Yb(NO₃)₃, the Yb(NO₃)₃/AOT composites were prepared by complete evaporation under vacuum of the volatile components (water and organic solvent) of the salt-containing microemulsions. It was observed that these composites can be totally dissolved in pure n-heptane or CCl₄, allowing the solubilization of a noticeable amount of Yb(NO₃)₃ in quite dry apolar media. By UV–vis–NIR, FT-IR, and ¹H NMR spectroscopies, some information on the state of Yb(NO₃)₃ within AOT reverse micelles were acquired, whereas by small angle X-ray scattering (SAXS), it has been ascertained that Yb(NO₃)₃ is quite homogeneously distributed as very small clusters among the reverse micelles. An analysis of SAXS and wide-angle X-ray scattering spectra of Yb(NO₃)₃/AOT composites leads to the hypothesis that, also in these systems, Yb(NO₃)₃ is dispersed in the surfactant matrix as very small clusters.     

When is water not water? Exploring water confined in large reverse micelles using a highly charged inorganic molecular probe

The interior water pool of aerosol OT (AOT) reverse micelles tends toward bulk water properties as the micelle size increases. Thus, deviations from bulk water behavior in large reverse micelles are less expected than in small reverse micelles. Probing the interior water pool of AOT reverse micelles with a highly charged decavanadate (V(10)) oligomer using (51)V NMR spectroscopy shows distinct changes in solute environment. For example, when an acidic stock solution of protonated V(10) is placed in a reverse micelle, the (51)V chemical shifts show that the V(10) is deprotonated consistent with a decreased proton concentration in the intramicellar water pool. Results indicate that a proton gradient exists inside the reverse micelles, leaving the interior neutral while the interfacial region is acidic.     

The development of conductive composite surfaces by a diffusion-limited in situ polymerization of pyrrole in sulfonated polystyrene ionomers

Electrically conductive composite surfaces were prepared by a diffusion-controlled in situ polymerization of pyrrole in the surface layer of sulfonated polystyrene ionomer films. Premolded films of the ionomer sulfonic acid derivatives were sequentially immersed in aqueous solutions of pyrrole and FeCl₃, and polymerization occurred only where both the monomer and the oxidant were present. The penetration of the polypyrrole (PPy) into the film was controlled by varying the immersion time in the monomer solution. The amount of PPy produced depended on the immersion time of the film in the monomer and the degree of sulfonation of the ionomer. Surface conductivities of 10⁻⁴-10⁻¹ S/cm were achieved with PPy concentrations from 2 to 22 wt % and composite layers as thin as 15 μm. Intermolecular interactions occurred between PPy and the ionomer by proton transfer. Incorporation of PPy also increased the tensile strength of the ionomer film, significantly increased its modulus above T_g, and inhibited melt flow. © 1997 John Wiley & Sons, Inc.     

Growth kinetics for AgI nanoparticles in AOT reverse micelles: effect of molecular length of hydrocarbon solvents

The growth kinetics for AgI nanoparticles formed in the solutions of water/AOT reverse micelles in n-hexane, n-octane, n-decane, and n-dodecane were investigated. In small micelles, the rate of nanoparticles growth was found to be independent of the type of solvent, while in large micelles the growth rate grew with increasing length of solvent molecules. The effect was explained by a different amount of free water in the micelle pools of the same size.     

反相胶束中辣根过氧化物酶的停流光谱研究

用停流光谱法研究了HRP在AOT、CTAB和SDS反相胶束中的吸收光谱和反应动力学，实验结果显示在AOT反相胶束中，HRP的吸收峰位置与水相中相同；而另外两种反相胶束对HRP的分子结构产生了较大影响，快速反应动力学研究显示在反相胶束中HRP形成化合物Ⅰ的速率常数远远高于化合物Ⅰ形成HRP—Ⅱ的反应速率常数，推测这是反相胶束的特殊性质造成的结果。     

Preparation and characterization of polypyrrole/magnetite nanocomposites synthesized by in situ chemical oxidative polymerization

This work describes the preparation and characterization of polypyrrole (PPy)/iron oxide nanocomposites fabricated from monodispersed iron oxide nanoparticles in the crystalline form of magnetite (Fe₃O₄) and PPy by in situ chemical oxidative polymerization. Two spherical nanoparticles of magnetite, such as 4 and 8 nm, served as cores were first dispersed in an aqueous solution with anionic surfactant sodium bis(2‐ethylhexyl) sulfosuccinate to form micelle/magnetite spherical templates that avoid the aggregation of magnetite nanoparticles during the further preparation of nanocomposites. The PPy/magnetite nanocomposites were then synthesized on the surface of the spherical templates. Structural and morphological analysis showed that the fabricated PPy/magnetite nanocomposites are core (magnetite)‐shell (PPy) structures. Morphology of the PPy/magnetite nanocomposites containing monodispersed 4‐nm magnetite nanoparticles shows a remarkable change from spherical to tube‐like structures as the content of nanoparticles increases from 12 to 24 wt %. Conductivities of these PPy/magnetite nanocomposites show significant enhancements when compared with those of PPy without magnetite nanoparticles, in particular the conductivities of 36 wt % PPy/magnetite nanocomposites with 4‐nm magnetite nanoparticles are about six times in magnitude higher than those of PPy without magnetite nanocomposites. These results suggest that the tube‐like structures of 36 wt % PPy/magnetite nanocomposites may be served as conducting network to enhance the conductivity of nanocomposites. The magnetic properties of 24 and 36 wt % PPy/magnetitenanocomposites show ferromagnetic behavior and supermagnetism, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1291–1300, 2008     

SPECTROSCOPIC AND DYNAMIC CHARACTERIZATION OF FMN IN REVERSED MICELLES ENTRAPPED WATER POOLS

Abstract— The encapsulation of FMN in surfactant entrapped water pools resulted into specific interactions of FMN with the polar head groups, the entrapped water molecules and the outer apolar solvent. Two positively charged surfactant/solvent systems were employed: dodecyl ammonium propionate (DAP) in toluene and hexadecyltrimethylammonium bromide (CTAB) in chloroform/ n -octane (6:5, vol/vol). Also a surfactant with a negatively charged polar head group, sodium bis (2-ethylhexyl) sulfosuccinate (AOT) in n -octane, was used. In CTAB and especially DAP reversed micellar systems the light absorption spectra revealed the localization of the flavin in a more apolar environment, while in AOT reversed micelles FMN appeared to reside mainly in the core of the water pool. The fluorescence spectra showed unresolved bands, which were blue-shifted in DAP and CTAB reversed micelles as compared to the spectra of aqueous FMN solutions. The fluorescence decay kinetics of FMN in enclosed water droplets is non-exponential. The heterogeneity can be explained assuming incomplete relaxation of partly immobilized water molecules during the lifetime of the excited singlet state. The relatively high anisotropy of the fluorescence of FMN in encapsulated water indicated a higher viscosity than in bulk water. This was confirmed by anisotropy decay measurements of FMN in DAP and AOT entrapped water, for which the rotational correlation times were much longer than for FMN in plain water.     

Electrochemical aspects of the reverse micelle extraction of proteins

The mechanism of the solvent extraction of cytochrome c (Cyt c) via reverse micelle formation was studied from an electrochemical point of view. Potentiometric measurements showed that the Galvani potential difference of the oil/water (O/W) interface played a crucial role in the spontaneous extraction of Cyt c with bis(2-ethylhexyl)sulfosuccinate (AOT). However, the dependence of the extraction efficiency on the concentration of an aqueous electrolyte (KCl) could be explained not by the effect of the interfacial potential, but by the change in the interfacial tension (gamma). Electrocapillary measurements showed that the adsorption of AOT anions to the O/W interface resulted in a significant decrease of gamma in a higher potential range, where reverse micelles were formed. The bottom level of gamma in the higher potential range was increased with [KCl]. The lower extraction efficiency for higher [KCl]'s was elucidated by a "size exclusion effect". This was also supported by water-content measurements by the Karl Fisher method.     

Mechanism and kinetics of the radical polymerization of acrylamide in inverse micelles

A kinetic study of the photoinitiated polymerization of acrylamide in oil/AOT/H₂O reverse micelles has been investigated. Determinations of the dependence of the rates of polymerization and the molecular weights of the polymers on initiator and monomer concentrations, as well as the relative light intensity and the identity of the oil employed were performed. Rates of polymerization were measured by dilatometry, and polymer molecular weights were determined by viscometry. The polymerization was shown to be first order in monomer concentration, and the order of the termination step of the polymerization depended strongly upon the oil employed. When the oil was benzene, termination occurred by a biradical process. When benzene was replaced by toluene, a monoradical termination was shown to occur, suggesting that a degradative chain transfer to toluene is occurring in this case. The similarities and differences of polymerization in conventional emulsions and in micelles are discussed on the basis of these results.     

Disruption of reverse micelles and release of trapped ribonuclease A photochemically induced by Malachite Green leuconitrile derivative

Photoinduced disruption of a sodium bis(2-ethylhexyl) sulfosuccinate (AOT) reverse micelle is triggered by a Malachite Green leuconitrile derivative (MGL). UV irradiation of MGL solubilized in an AOT-water-chloroform mixture creates a cationic surfactant that interacts electrostatically with the anionic AOT. We investigated the disruption of the reverse micelle by using proton nuclear magnetic resonance spectroscopy and found that UV irradiation of MGL decreases the number of water molecules solubilized in the interior of the AOT reverse micelles. Furthermore, the photoinduced disruption of the reverse micelle is shown to release ribonuclease A, which is trapped in the water in the interior of the AOT reverse micelle. This photoinduced release may offer a desirable transport system of biopolymers.     

Activity and kinetics studies of yeast alcohol dehydrogenase in a reverse micelle formulated from functional surfactants

Yeast alcohol dehydrogenase (YADH) showed substantial decrease in its catalytic activity due to the strong electrostatic interaction between the head groups of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) and YADH in AOT reverse micelles. However, the catalytic activity of YADH in a nonionic reverse micellar interface (GGDE/TX-100) obtained from a functional nonionic surfactant N-gluconyl glutamic acid didecyl ester (GGDE) and Triton X-100 (TX-100) was higher than that in AOT reverse micelle under the respective optimum conditions. A comparison of the kinetic parameters showed that the turnover number k_cat in GGDE/TX-100 reverse micelle was 1.4 times as large as that in AOT reverse micelle, but the Michaelis constants in AOT reverse micelle for ethanol K_m^B was twice and for coenzyme NAD⁺ K_m^A was 5 times higher than their counterparts in GGDE/TX-100 reverse micelle. For the conversion of ethanol, the smaller K_m^B and larger k_cat in GGDE/TX-100 reverse micelle resulted in higher catalytic efficiency k_cat/K_m^B. The stability of YADH in GGDE/TX-100 reverse micelle was also found to be better than that in AOT reverse micelle. They were mainly attributed to the absence of electric charge on the head groups of GGDE and TX-100 in the GGDE/TX-100 reverse micelle.      

Transition from micelle to vesicle in aqueous mixtures of anionic/zwitterionic surfactants studied by fluorescence, conductivity, and turbidity methods

Vesicles form spontaneously in a aqueous mixture of sodium bis(2-ethylhexyl) sulfosuccinate (Aerosol OT) and lauryl sulfonate betaine (LSB). Different from catanionic vesicles, the formation or disaggregation of such zwitterionic/anionic vesicles may be easily controlled by adjusting the relative amount of LSB and salinity. The participation of LSB reduces the polydispersity of the vesicles and even results in the formation of monodispersed vesicles at a certain salinity. But as LSB exceeds a certain proportion, vesicles cannot form at any concentration and salinity, making convenient the study of the structural transitions. We applied pyrene as a fluorescence probe and monitored the transition among the monomer, micelle, and vesicle through the variation of I(1)/I(3), accompanied by conductivity and turbidity measurements. In LSB solution and LSB-rich mixture, an abrupt change of the ratio of I(1)/I(3) was found in the transition from monomer to micelle with increasing concentration, as well as in the transition from micelle to vesicle with increasing salinity, which shows that a difference of the polarity of the microenvironment between the micelle and the vesicle bilayer resulted from the composition change. But in AOT solution and AOT-rich mixture, only a gradual change in the transition is observed due to the existence of intermediate structures, which have different microenvironments from micelles and vesicles. So the formation of vesicle experiences a process of monomer to premicelle to micelle to bilayer segment with increasing concentration by combining the conductivity method. The ratio of I(1)/I(3) is independent of the vesicle size once formed.     

Effect of Increasing Concentration of Each of Three Polar Solvents (1,4-Dioxane, Dimethyl Sulfoxide, N,N-Dimethylformamide) on Changes in the Shape of Polysorbate 20 Micelles

The effect of increasing concentration of each of three polar solvents [0–40 % (v/v) 1,4-dioxane, 0–40 % (v/v) dimethyl sulfoxide (DMSO), and 0–60 % (v/v) N,N-dimethylformamide (DMF)] on changes in the shape of the surfactant polysorbate 20 (Tween 20) micelles in the aqueous, polar solvent, sodium phosphate buffer solutions (pH = 7.2, ionic strength 2.44 mmol·L^?1) were investigated by using small-angle X-ray scattering. The effect of increasing concentration of 1,4-dioxane is that the micelle shape changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 10 and 20 % (v/v) 1,4-dioxane, and then from core–shell disc micelles to core–shell elliptic disc micelles between concentrations of 30 and 40 % (v/v) 1,4-dioxane. The effect of increasing concentration of DMSO is that the micelles changed from core–shell cylindrical micelles to core–shell disc micelles between concentrations of 0 and 10 % (v/v) DMSO. The effect of increasing concentration of DMF is that it changed the core–shell cylindrical micelles to core–shell disc micelles between concentrations of 30 and 40 % (v/v) DMF. The common effect is that the solvents shortened the height of the micelle, that is, they squashed the micelle. Moreover, the specific effect of 1,4-dioxane is that this solvent squashed and squeezed the micelle.