Synthesis,characterization and catalytic activity of peripherally tetra‐substituted Co(II) phthalocyanines for cyclohexene oxidation

New 3,3‐diphenylpropoxyphthalonitrile (5) was obtained from 3,3‐diphenylpropanol (3) and 4‐nitrophthalonitrile (4) with K₂CO₃ in DMF at 50 °C. The novel cobalt(II) phthalocyanine complexes, tetrakis‐[2‐(1,4‐dioxa‐8‐azaspiro[4.5]dec‐8‐yl)ethoxy] phthalocyaninato cobalt(II) (2) and tetrakis‐(3,3‐diphenylpropoxy)phthalocyaninato cobalt(II) (6) were prepared by the reaction of the phthalonitrile derivatives 1 and 5 with CoCl₂ by microwave irradiation in 2‐(dimethylamino)ethanol for at 175 °C, 350 W for 7 and 10 min, respectively. These new cobalt(II)phthalocyanine complexes were characterized by spectroscopic methods (IR, UV–visible and mass spectroscopy) as well as elemental analysis. Complexes 2 and 6 are employed as catalyst for the oxidation of cyclohexene using tert‐butyl hydroperoxide (TBHP), m‐chloroperoxybenzoic acid (m‐CPBA), aerobic oxygen and hydrogen peroxide (H₂O₂) as oxidant. It is observed that both complexes can selectively oxidize cyclohexene to give 2‐cyclohexene‐1‐ol as major product, and 2‐cyclohexen‐1‐one and cyclohexene oxide as minor products. TBHP was found to be the best oxidant since minimal destruction of the catalyst, higher selectivity and conversion were observed in the products. Copyright © 2012 John Wiley & Sons, Ltd.     

Degradation of substituted phenols with different oxygen sources catalyzed by Co(II) and Cu(II) phthalocyanine complexes

Research on substituted phenol degradations has received substantial attention. In this work, effective Co(II) and Cu(II) phthalocyanine complexes as catalysts were studied to degrade toxic phenols to harmless products. The effect of various process parameters, such as initial concentration of phenol, catalyst, oxygen sources, and temperature on the degradation reaction was investigated to achieve maximum degradation efficiency. The catalytic activities of Co(II) and Cu(II) phthalocyanines were evaluated for oxidation of phenolic compounds such as p-nitrophenol, o-chlorophenol, 2,3-dichlorophenol, and m-methoxyphenol. Co(II) phthalocyanine displayed good catalytic performance in degradation of 2,3-dichlorophenol to 2,3-dichlorobenzaldehyde and 2,3-dichloro-1,4-benzoquinone with the highest TON and TOF values within 3?h at 50?°C. The fate of catalyst during the degradation process was followed by UV–Vis spectroscopy.     

Co(II) and Fe(II) phthalocyanines: synthesis,investigation of their catalytic activity towards phenolic compounds and electrochemical behaviour

4‐[(1‐Benzylpiperidin‐4‐yl)oxy]‐substituted cobalt(II) and iron(II) phthalocyanine complexes were synthesized and their catalytic activity towards various phenolic compounds was investigated. Converting from environmentally harmful phenolic compounds into less harmful oxidation products using phthalocyanines makes this study attractive. This catalysis is feasible and time‐saving in terms of procedure and the best oxidation conditions determined. Electrochemical studies were also carried out using cyclic voltammetry and square wave voltammetry techniques. Voltammetric analyses of the synthesized phthalocyanine complexes supported their proposed structures. Copyright © 2015 John Wiley & Sons, Ltd.     

Cu(II)-catalyzed oxidative esterification of 2-carbonyl substituted phenols from the alcohol oxidation level

A copper-catalyzed oxidative esterification of 2-carbonyl substituted phenols from the alcohol oxidation level is described. This protocol represents direct access to a range of 2-carbonylated aryl benzoate derivatives, which are important building blocks in the synthesis of natural and pharmacological compounds.     

Anthracene Substituted Co (II) and Cu (II) phthalocyanines; Preparations,Investigation of Catalytical and Electrochemical Behaviors

An approach to investigation of catalytical behaviors of Co (II) and Cu (II) phthalocyanines is reported that is based on changing any parameter to effect these behaviors. Towards this end, new anthracene substituted Co (II) and Cu (II) phthalocyanines were prepared and characterized spectroscopic methods. New cobalt (II) and copper (II) phthalocyanines were used as catalyst for oxidation of different phenolic compounds (such as 2,3‐dichlorophenol, 4‐methoxyphenol, 4‐nitrophenol, 2,3,6‐trimethylphenol) with different oxidants. Then, electrochemical characterization of cobalt (II) and copper (II) phthallocyanines were determined by using cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. Although copper (II) phthalocyanine showed similar Pc based electron transfer processes, cobalt (II) phthalocyanine showed metal and ligand based reduction reactions as expected.     

Electrochemical characterization of Co(II) and Pd(II) phthalocyanines carrying diethoxymalonyl and carboxymethyl substituents

In this study, electrochemical behaviors of Co(II) and Pd(II) phthalocyanines carrying tetrakisdiethoxymalonyl and Pd(II) phthalocyanine carrying tetrakiscarboxymethyl substituents at the peripheral positions are investigated by cyclic voltammetry and applied potential chronocoulometry techniques. Cyclic voltammetric studies show that, while Pd(II) phthalocyanines carrying diethoxymalonyl and carboxymethyl substituents give up to three common phthalocyanine ring reductions, Co(II) phthalocyanine carrying diethoxymalonyl substituents gives a metal-centered oxidation and a metal-centered reduction and three ligand-centered reduction and a ligand-centered oxidation processes. First reduction processes of both the PdPc complexes have shoulders. This different voltammetric behaviors of Pd(II) phthalocyanines carrying carboxymethyl and diethoxymalonyl substituents results from interaction of this distinctive substituents with the phthalocyanine ring π electron system and interaction with the different solvent systems. Observation of the splitting of the first reduction process of Pd(II) phthalocyanines carrying diethoxymalonyl and carboxymethyl substituents suggests the aggregation of the complex. Very small diffusion coefficient of the complexes with respect to Co(II) phthalocyanine also confirms the existence of the aggregation of the complex during the electrochemical studies. Effects of the substituents and the solvent media are clearly observed from the differences of the voltammograms of Pd(II) phthalocyanines carrying diethoxymalonyl and carboxymethyl substituents in DMSO and THF solvent media, respectively. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 1, pp. 36–43. The text was submitted by the authors in English.     

Synthesis and characterization of Co(II) and Cu(II) supported complexes of 2-pyrazinecarboxylic acid for cyclohexene oxidation

The complexes [Co(N^O)₂] (1) and [Cu(N^O)₂] (2) {N^O = η²-(N,O) coordinated 2-pyrazinecarboxylic acid} have been synthesized and characterized by elemental (including metal) analyses, FT-IR spectroscopy and powder X-ray diffraction. The molecular structure of complex 2 was determined by single X-ray crystallography. In the molecule, the Cu atom occupies the center of a square planar geometry, which consists of two trans-O atoms and two trans-N atoms of two 2-pyrazinecarboxylic acid ligands. The complexes 1 and 2 were well encapsulated into zeolite–Y super-cage to yield the corresponding zeolite–Y encapsulated metal complexes, abbreviated herein as [Co(N^O)₂]–Y (3) and [Cu(N^O)₂]–Y (4). Similarly, the metal complexes 1 and 2 were immobilized on alumina and organically modified silica surfaces to lead to the formation of immobilized metal complexes [Co(N^O)₂]–Al₂O₃ (5); [Cu(N^O)₂]–Al₂O₃ (6); [Co(N^O)₂]–AMPS (7) and [Cu(N^O)₂]–AMPS (8) (AMPS = aminopropyl silica). Elemental (including metal) analyses, FT-IR spectroscopy, powder X-ray diffraction and thermal analysis have been used to characterize these materials. The catalytic activity of all the catalysts 1–8 towards the oxidation of cyclohexene into different chemically and pharmaceutically important products were evaluated under homogeneous and heterogeneous conditions. In order to obtain a maximum conversion of cyclohexene, the reaction parameters, like reaction temperature and time, were optimized. Under the optimized conditions, a maximum of 90.47% cyclohexene conversion was achieved with [Cu(N^O)₂]–Y (4) with a 1:2 molar ratio reaction of cyclohexene and H₂O₂.     

Preparation and characterization of Cu(II) oxide

Copper(II) oxide was prepared by oxidation of copper metal and decomposition of the nitrate. The presence of copper in the formal valence of Cu(III) has been confirmed in p-type CuO. The magnetic and electronic properties have been studied as a function of preparation and annealing conditions.     

Synthesis and characterization of novel 4-nitro-2-(octyloxy)phenoxy substituted symmetrical and unsymmetrical Zn(II), Co(II) and Lu(III) phthalocyanines

Compounds 3 and 4 have been prepared by the reaction of 4-nitrocatechol 1 and 4-nitrophthalonitrile 2 by a common method, aromatic nucleophilic subtitution of the nitro group in 4-nitrophthalonitrile. Starting from 4 and 1-bromooctane, their alkylation reaction gave compound 5. Zn(II) 8, Co(II) 9 and Lu(III) 10 complexes were synthesized from the corresponding metal salts by the tetramerization of compound 5. Compound 7 was prepared by the statistical condensation of 5 and 4,5-bis(hexylthio)phthalonitrile 6 with CoCl₂ · 6H₂O in dry dimethylformamide. The new compounds were characterized by FT-IR, UV/Vis, NMR and mass spectra. The electrochemical properties of the complexes were also investigated by cyclic voltammetry in non-aqueous medium. The effect of temperature on the dc conductivity and the impedance spectra of spin coated film of the compounds was investigated at temperatures between 295 and 433 K and in the frequency range 40–10⁵ Hz. Thermally activated conductivity dependence on temperature was observed for all compounds.     

Synthesis,crystal structures,and characterization of a new substituted 1,2,4-triazole and its two Co(II)/Mn(II) complexes

A new triazole-substituted ligand H₂L (H₂Trza = 3-amino-1H-1,2,4-triazole-5-acetate) and its two new isomorphic compounds [M(HTrza)₂(_H2O)₂] ? 2H₂O (Co(I) and Mn(II)) have been synthesized and characterized structurally. Their X-ray crystal structures (CIF files CCDC nos. 906893 for I and 906892 for II) show that H₂L belongs to a tetragonal system; space group P4₃ with a = b = 5.0445(13), c = 27.054(10) Å; Z = 4. Complex I belongs to a monoclinic system; space group P2₁/n with a = 7.6543(8), b = 7.3453(8), c = 13.6283(14) Å; β = 91.5990(10)°, Z = 2. Complex II belongs to a triclinic system; space group with a = 6.8550(15), b = 8.0630(18), c = 15.173(4) Å; α = 84.794(4)°, β = 79.005(3)°, γ = 73.779(4)°, Z = 2. X-ray analysis demonstrates that compound H₂L is found to contain a H₂Trza and a lattic water molecule; complexes I and II are discrete mononuclear species. The central Co(II) and Mn(II) atoms exhibit octahedral coordinations, type 4 + 2. In two compounds, the coordination entities are further organized via hydrogenbonding interactions to generate uniform supramolecular networks. Thermal stabilities of two compounds were examined by thermogravimetric analysis.     

Preparation and characterization of Co(II), Ni(II) and Cu(II) complexes of a ligand containing 1,3,4-thiadiazole groups

(1R,2R)-1,2-bis-(5-amino-1,3,4-thiadiazole-2-yl)ethane-1,2-diol (L) has been prepared by the reaction of thiosemicarbazide with (2R,3R)-(+)-tartaric acid (I) and phosphorous oxychloride, and its complexes with Co(II), Ni(II) and Cu(II) have been obtained. The structures of the ligand and its complexes have been established by i. r., ¹H- and ¹³C-n.m.r. spectra, u.v.–vis–nir spectroscopy, elemental analyses, T.g.-D.t.a. and magnetic susceptibility measurements.     

Cu(II)-catalyzed selective aerobic oxidation of alcohols under mild conditions

Aerobic Alcohol Oxidation. An efficient four-component system consisting of acetamido-TEMPO/Cu(ClO4)2/TMDP/DABCO in DMSO has been developed for room-temperature aerobic alcohol oxidation. Under the optimal conditions, various alcohols could be converted into their corresponding aldehydes or ketones in good to excellent yields. The newly developed catalytic system could also be recycled and reused for three runs without any significant loss of catalytic activity.     

Mixed-addenda vanadium-substituted polyfluorooxometalates: synthesis, characterization, and catalytic aerobic oxidation

For the first time, mixed-addenda vanadium-substituted polyfluorooxometalates, PFOMs, have been synthesized. Depending on the workup procedure used, two types of compounds were prepared. The first PFOM was a quasi Wells--Dawson type compound, [H2F6NaVVW17O56]8-, and the second a mixture of vanadium-substituted polyfluorooxometalates of the Keggin structure, XVIVW11FnO40 - n (X = H2, V, W; n = 1-4). From the X-ray diffraction analysis, [H2F6NaVVW17O56]8- has an elliptic (egg) shape with a central sodium atom surrounded by six fluorine atoms in a trigonal prism coordination. One may differentiate between two types of addenda atoms to be found in belt and capped positions. According to 1H, 19F, and 51V NMR analysis, it is concluded that vanadium is isomorphically substituted in both the belt and capped position of [H2F6NaVVW17O56]8-. The mixture of vanadium-substituted PFOMs of the Keggin structure was shown, by HPLC and ESR, to contain at least two species of different charge and of a different vanadium environment. The [H2F6NaVVW17O56]8- PFOM was active for the catalytic aerobic oxidation of alkyl aromatic compounds in biphasic (water-catalyst and substrate) media. The reaction selectivity (autoxidation versus oxydehydrogenation) depended on the substrate and reaction conditions such as temperature and oxygen pressure. The selectivity to oxydehydrogenation was significantly higher compared to the prototypical cobalt acetate catalytic system.     

Synthesis, structure and oxidation of new ytterbium(II) bis(phenolate) compounds and their catalytic activity towards epsilon-caprolactone

Two ytterbium(II) bis(phenolate) complexes, [LRYb] where R=NMe2 and OMe have been synthesized and characterized, with being structurally defined to be a dimeric species with an unsymmetrical coordination of the bis(phenolate) ligand which is preserved in solution. Both and have been oxidized by a variety of oxidants (AgX, ROH) to form heteroleptic ytterbium(III) bis(phenolate) complexes: [(LNMe2)YbPF6], [(LNMe2)YbOSO2CF3(thf)], [(LNMe2)YbOBut], [(LNMe2)YbOPh], [(LOMe)YbOPh]. Compound has been structurally characterized as having a quasi-octahedral environment around ytterbium, with significant inter species hydrogen bonding between CHx and triflate fluorine atoms. Ligand exchange between Yb(N(SiMe3)2)3(thf)2 and H2LR yielded [(LNMe2)YbN(SiMe3)2] and [(LOMe)YbN(SiMe3)2], while metathesis from YbI2(thf)2 and K2LOMe reproducibly afforded the surprising oxidized product [(LOMe)2YbK(dme)2], which was structurally characterized as having a distorted octahedral environment around the ytterbium(III) centre. Compounds were used to polymerize epsilon-caprolactone at room temperature in toluene, with only compounds and exhibiting significant catalytic activities. The polycaprolactone formed in these reactions was generally of high molecular weight and polydispersities<1.90 in all but one case.     

A new mesitylenic cyclobutane substituted Schiff base ligand and its Co(II), Cu(II), Ni(II), and Zn(II) complexes

A new ligand, 4‐(1‐methyl‐1‐mesityl‐3‐cyclobutanyl)‐2‐(2‐hydroxy‐1‐naphthylideneimino)thiazole (LH), has been synthesized starting from 1‐methyl‐1‐mesityl‐3‐(2‐chloro‐1‐oxoethyl)cyclobutane and thiourea and subsequently 2‐hydroxy‐1‐napthalaldehyde. Mononuclear complexes with a metal‐ligand ratio of 1:2 have been prepared with Co(II), Cu(II), Ni(II), and Zn(II) metals. The authenticity of the ligand and its complexes are proposed based on elemental analyses, IR, UV‐vis, ¹³C and ¹H NMR spectra, magnetic susceptibility measurements, thermogravimetric analyses, and differential scanning calorimetry. © 2001 John Wiley & Sons, Inc. Heteroatom Chem 12:42–46, 2001     

Synthesis,characterization and catalytic activity of novel Co(II) and Pd(II)‐perfluoroalkylphthalocyanine in fluorous biphasic system; benzyl alcohol oxidation

Tetrakis[heptadecafluorononyl] substituted phthalocyanine complexes were prepared by template synthesis from 4‐(heptadecafluorononyloxy)phthalonitrile with Co(CH₃COO)^·₂H₂O or PdCl₂ in 2‐N, N‐dimethylaminoethanol. The corresponding phthalonitrile was obtained from heptadecafluorononan‐1‐ol and 4‐nitrophthalonitrile with K₂CO₃ in DMF at 50 °C. The structures of the compounds were characterized by elemental analysis, FTIR, UV–vis and MALDI‐TOF MS spectroscopic methods. Metallophthalocyanines are soluble in fluoroalkanes such as perfluoromethylcyclohexane (PFMCH). The complexes were tested as catalysts for benzyl alcohol oxidation with tert‐butylhydroperoxide (TBHP) in an organic–fluorous biphasic system (n‐hexane–PFMCH). The oxidation of benzyl alcohol was also tested with different oxidants, such as hydrogen peroxide, m‐chloroperoxybenzoic acid, molecular oxygen and oxone in n‐hexane–PFMCH. TBHP was found to be the best oxidant for benzyl alcohol oxidation since higher conversion and selectivity were observed when this oxidant was used. Copyright © 2008 John Wiley & Sons, Ltd.