Crystallization and Simulation Studies in <Emphasis Type="Italic">m</Emphasis>-Dinitrobenzene–<Emphasis Type="Italic">p</Emphasis>-Chloroaniline Eutectic System

Thaw-melt method showed that the phase diagram of m-dinitrobenzene (m-DNB)–p-chloroaniline (p-CA) system belongs to simple eutectic type. The kinetics of solidification followed Hillig and Turnbull’s equation. Excess thermodynamic functions and FT-IR spectral studies indicated some weak interaction between the component molecules in the eutectic. The mechanical strength of the eutectic was found to be higher than those of its components. Molecular stability was predicted on the basis of frontier molecular orbital analysis. The value was found to be 0.06073 a.u. for eutectic, indicating. the possibility of charge transfer interaction during the eutectic formation. Results showed that the eutectic is stabilized by hydrogen-bond formation. Calculated interaction energy of reactants and eutectic was found to be–17.4 kJ mol^–1.     

Directed Aminomethylation of Pyrrole,Indole, and Carbazole with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>,<Emphasis Type="Italic">N′</Emphasis>-Tetramethylmethanediamine

Catalytic aminomethylation of pyrrole and indole with N,N,N′,N′-tetramethylmethanediamine in the presence of 5 mol % of ZrOCl₂·8H₂O proceeds selectively at the positions 2, 5 of pyrrole and 1, 3 of indole. Carbazole under the same conditions affords 3-formyl-9-aminomethyl derivative. The reaction in the presence of 5 mol % of K₂CO₃ occurs as monoaminomethylation: for pyrrole at the position 2, for indole at the position 3, and for carbazole at the nitrogen atom of the substrate. Water-soluble 1,1′-(1H-pyrrole-2,5-diyl)bis(N,N-dimethylmethanamine) exhibits a fungistatic activity with respect to phytopathogenic fungi Rhizoctonia solani.     

Phase Diagrams of the <Emphasis Type="Italic">n</Emphasis>-Decane–<Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane, <Emphasis Type="Italic">n</Emphasis>-Decane–Cyclododecane,and <Emphasis Type="Italic">n</Emphasis>-Hexadecane–Cyclododecane Systems

The n-decane–n-hexadecane–cyclododecane, n-decane–cyclododecane, and n-hexadecane–cyclododecane systems are studied by means of low-temperature differential thermal analysis using a differential scanning heat flow calorimeter. It is noted that all studied systems belong to the eutectic type. It is concluded that in the n-decane–n-hexadecane–cyclododecane system, the eutectic composition contains 85.0 wt % n-С₁₀Н₂₂, 4.0 wt % n-С₁₆Н₃₄, and 11.0 wt % С₁₂Н₂₄. It has a melting point of ?35.0°C.     

Application of silica-supported Fe–Cu nanoparticles in the selective hydrogenation of <Emphasis Type="Italic">p</Emphasis>-dinitrobenzene to <Emphasis Type="Italic">p</Emphasis>-phenylenediamine

Supported bimetallic Fe–Cu/SiO₂ materials are synthesized, and their catalytic activity in hydrogenation of dinitrobenzene to phenylenediamine at 145–180°С and 1.3 MPa hydrogen pressure is studied for the first time. The best results (89% selectivity toward _p-phenylenediamine at complete conversion of _p-dinitrobenzene) are obtained for the sample synthesized via co-deposition with subsequent calcination at 300°С. The sample contains 7% iron and 3% copper. The formation of separate phases of metal oxides (for the catalysts prepared by impregnation) and mixed bimetallic oxide phases (in case of co-deposition procedure) in calcined samples is revealed via thermoprogrammed reduction with hydrogen.     

New photochromic 1,1,3-trimethylspiro[benzo[<Emphasis Type="Italic">e</Emphasis>]indoline-2,3′-[3<Emphasis Type="Italic">H</Emphasis>]-pyrano[3,2-<Emphasis Type="Italic">f</Emphasis>]quinoline]

A new photochromic spiropyran of the benzoindoline series containing the quinoline moiety was synthesized. Its structure was determined by IR and ¹H NMR spectroscopy. The crystal structure of the new compound was established by X-ray diffraction. The photochromic properties of the synthesized spiropyran were investigated.     

New “s<Emphasis Type="Italic">p</Emphasis><Superscript><Emphasis Type="Italic">2</Emphasis></Superscript>-bonded” carbanucleosides

By reaction of 2,3-dichloro-, 2,3,5-trichloro-, 2,5-dichloro-3-phenylsulfonyl-, 2-chloro-3-phenylsulfonyl-4,4-ethylenedioxycyclopent-2-en-1-ones with uracyl 3- and 2-uracyl derivatives were obtained of the corresponding chlorocyclopentenone.     

<Emphasis Type="Italic">N</Emphasis>′-tetrazolylmethoxyl derivatives of <Emphasis Type="Italic">N</Emphasis>-methyldiazene <Emphasis Type="Italic">N</Emphasis>-oxides

A preparation method was developed for previously unknown tetrazole derivatives containing in the 1, 2, and/or 5 positions of the tetrazole ring N-methyldiazene-N-oxide-N′-oxymethyl groups.     

Characteristics of the hydrogen bond and the structure of Н-complexes of <Emphasis Type="Italic">p</Emphasis>-n-propyloxybenzoic acid and <Emphasis Type="Italic">p</Emphasis>-n-propyloxy-<Emphasis Type="Italic">p</Emphasis>′-cyanobiphenyl

The conformational properties of p-n-propyloxybenzoic acid and p-n-propyloxy-p′-cyanobiphenyl molecules, which can exhibit liquid crystalline properties in the formation of Н-complexes, are studied (DFT/B3LYP)/cc-pVTZ method). It is found that a molecule of p-n-propyloxybenzoic acid has 16 conformers that can be divided into four groups with respect to relative energies (0 kcal/mol, 1.6 kcal/mol, 6.5 kcal/mol, and 8.1 kcal/mol), and a molecule of p-n-propyloxy-p′-cyanobiphenyl has six conformers with relative energies of 0 kcal/mol (two conformers, φ(С_Ph–O–C–C)=180°) and 1.6 kcal/mol (four conformers, φ(С_Ph–O–C–C)=64.4°). In all conformers of the 3-AOCB molecule, phenyl rings are turned at 35° relative to each other. A conformation with the planar arrangement of two rings has a higher energy by 1.5 kcal/mol. Barriers to the internal rotation of different groups are determined and it is established that the structural nonrigidity of the molecules is mainly due to the possible rotation of the–C₂Н₅ moiety about the C–C bond. It is shown that with increasing temperature the vibrational amplitudes of the OC₃H₇ substituent, which enhance the probabilities of transitions between the conformers, become appreciably larger. It is found that p-n-propyloxybenzoic acid and p-n-propyloxy-p′-cyanobiphenyl can form Н-complexes with the medium hydrogen bond. Two types of the structural organization of Н-complexes are considered: linear and angular. The similarity of energies of Н-complexes with different structures (NBO analysis) can be the reason for the occurrence of two liquid crystalline subphases of p-n-propyloxybenzoic acid and p-n-propyloxy-p′-cyanobiphenyl system.     

Influence of the force interaction on accumulation of macroscopic correlations in elementary reaction <Emphasis Type="Italic">A</Emphasis> + <Emphasis Type="Italic">B</Emphasis> → <Emphasis Type="Italic">C</Emphasis>

The applicability of the Encounter Theory (ET) (the prototype of the Collision Theory) concepts for widely occurring diffusion assisted irreversible bulk reaction A + B →C (for example, radical reaction) in dilute solutions taking account of initial microscopic correlations and force interactions between reactants has been treated theoretically with modern many-particle method for the derivation of non-Markovian binary kinetic equations. The method shows that taking into consideration initial correlations and force interactions leads to the redefinition of the Markovian rate constant only in the expressions derived earlier. Thus, just as in the reaction A + A →C and the reaction A + B →C neglecting force and initial correlations, the Modified Encounter Theory (MET), when reduced to equations of a Regular Form, both extends the time applicability range of ET homogeneous rate equation, and yields the inhomogeneous equation of the Generalized Encounter Theory (GET). It reveals macroscopic correlations induced by the encounters in the reservoir of free walks in full agreement with physical considerations. Time accumulation of macroscopic correlations obeys the same time law as in the previously considered case neglecting force interactions. Just the rate of the process will change, according to traditional redefinition of the steady-state constant of the reaction.     

Computer models of eutectic-type <Emphasis Type="Italic">T</Emphasis>–<Emphasis Type="Italic">x</Emphasis>–<Emphasis Type="Italic">y</Emphasis> diagrams with allotropy

Using the eutectic-type T–x–y diagram as an example, it can be represented the analysis of its geometrical construction dependence on the temperature of a component two polymorphous modifications which participate in mono- and invariant metatectic and invariant eutectic (eutectoid) transformations above or below (and within) binary eutectics temperature intervals and below a ternary eutectic temperature. Computer models for considered phase diagrams have been designed. Such models help to solve applied tasks like visualization, isopleths and isothermal sections decoding, mass balances calculation and evaluation of phase and conglomerate concentration in microstructure.     

Thermophysical properties of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimеthylacetamide mixtures with <Emphasis Type="Italic">n</Emphasis>-butanol

The refraction, dielectric, viscosity, density, data of the binary mixtures of N,N-dimethylacetamide (DMA) with n-butanol at 308.15 and 313.15 K. The measured parameters used to obtain derived properties like Bruggeman factor, molar refraction and excess static dielectric constant, excess inverse relaxation time, excess molar volume and excess viscosity, excess molar refraction. The variation in magnitude with composition and temperature of these quantities has been used to discuss the type, strength and nature of binary interactions. Results confirm that there are strong hydrogen-bond interactions between unlike molecules of DMA+ n-butanol mixtures and that 1: 1 complexes are formed and strength of intermolecular interaction increases with temperature.     

Study of<Emphasis Type="Italic"> β</Emphasis>–<Emphasis Type="Italic">α</Emphasis> recrystallization of the polypropylene

The crystalline modifications and of polypropylene (PP) were studied by using polarized light microscopy (PLM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Typically crystals surrounded by spherulites were observed at low temperature. With increasing temperature the crystals melted and a new crystal appeared. More interestingly, the melting temperature of the new crystal was about 5 ° higher than that of spherulites originally present in the sample formed isothermally. It was assumed that this new crystal was the recrystalline crystal. This assumption was supported by the DSC results. Furthermore, the crystallization kinetics of the PP used was studied on the basis of the traditional Avrami analysis. As a result, the Avrami exponents of crystallization temperature from 120 to 130 °C ranged between 4.21 and 3.60, indicating that the crystallization mechanism of PP order melt was spherulitic growth and random nucleation.     

SBR composites reinforced with <Emphasis Type="Italic">N</Emphasis>-isopropyl-<Emphasis Type="Italic">N</Emphasis>′-phenyl-<Emphasis Type="Italic">P</Emphasis>-phenylenediamine-modified clay

SBR compounds including the N-isopropyl-N’-phenyl-p-phenylenediamine-modified clay(organoclay) were prepared.Effects of modified clay and antioxidant(IPPD) contents on mechanical and rheological properties of SBR composites were studied.FTIR results confirmed that the clay was chemically modified by IPPD and changed into an organoclay.X-ray diffraction(XRD) results confirmed the increase in interlayer distance of the clay due to the insertion of IPPD.Rheological and cure characteristics of SBR compounds were determined using RPA(Rubber Process Analyzer) and rheometer.Scorch time and cure time of SBR compounds decreased with introduction of the organoclay.Mechanical properties and heat aging resistance of the SBR composites were improved significantly by incorporation of the organoclay.     

Oxidation of reaction products of <Emphasis Type="Italic">p</Emphasis>-aryl-<Emphasis Type="Italic">С</Emphasis>,<Emphasis Type="Italic">С</Emphasis>-disubstituted nitrones and dimethyl 3-methylenecyclopropane-1,2-dicarboxylate

Oxidation with 2,3-dichloro-4,5-dicyanobenzoquinone of 2,4-dihydro-1Н-azeto[1,2-a]quinoline-3,4 -dicarboxylates obtained in the reaction of N-aryl-С,С-disubstituted nitrones with Feist’s acid ester resulted in the formation of 2-vinylquinoline-3,4-dicarboxylates in good yields.     

Complex formation of magnesium and calcium ions with trimethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>’,<Emphasis Type="Italic">N</Emphasis>’-tetraacetic acid

Stability constants and heat effects of the formation reactions of magnesium and calcium trimethylenediaminetetraacetates at 298.15 K and ionic strength of 0.1, 0.5, and 1.0 (mol/L KNO₃) have been determined by means of potentiometry and calorimetry. Standard thermodynamic parameters (log K⁰, Δ_rG⁰, Δ_rH⁰, and Δ_rS⁰) of the studied equilibriums have been determined.     

1,3-Diamino-2-Hydroxypropane-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′,<Emphasis Type="Italic">N</Emphasis>′-Tetraacetic Acid: Crystal and Molecular Structures

The synthesis, IR spectroscopic study, and X-ray diffraction analysis (CIF file CCDC no. 1574078) are carried out for 1,3-diamino-2-hydroxypropane-N,N,N′,N′-tetraacetic acid (I). The structural units of a crystal of compound I are (H_4.5HPdta)^0.5– anions, (H_5.5HPdta)^0.5+ cations, and molecules of water of crystallization joined by a branched network of hydrogen bonds: strong intermolecular O–H…O and intramolecular N–H…O bonds.     

Determination of the <Emphasis Type="Italic">R</Emphasis> ⇄ <Emphasis Type="Italic">S</Emphasis> enantiomerization barrier in 5,6-dihydrobenzoimidazo[1,2-<Emphasis Type="Italic">c</Emphasis>]quinazolines

Chiral imidazoquinazolines undergoing thermally induced reversible R ⇄ S enantiomerization have been synthesized by the interaction of 2-(o-aminophenyl)benzimidazoles with aldehydes and ketones. The benzimidazole fragment has been used for the first time as an indicator group in temperature-dependent ¹H NMR spectra for determining the energy barrier of this rearrangement. The effects of nearby substituents on the kinetic and activation parameters, and on the recyclization mechanism have been investigated.     

Synthesis of 20<Emphasis Type="Italic">S</Emphasis>-protopanaxadiol <Emphasis Type="Italic">β</Emphasis>-D-galactopyranosides

20S-Protopanaxadiol (3β,12β,20S-trihydroxydammar-24-ene) 3-, 12-, and 20-O-β-D-galactopyranosides were synthesized for the first time. Condensation of 12β-acetoxy-3β,20S-dihydroxydammar-24-ene (1) and 2,3,4,6-tetra-O-acetyl-α-D-galactopyranosylbromide (α-acetobromogalactose) (2) under Koenigs–Knorr conditions with subsequent removal of the protecting groups resulted in regio- and stereoselective formation of 20S-protopanaxadiol 3-O-β-D-galactopyranoside, an analog of the natural ginsenoside Rh₂. Glycosylation of 12β,20S-dihydroxydammar-24-en-3-one (5) by 2 with subsequent treatment of the reaction products with NaBH₄ in isopropanol and deacetylation with NaOMe gave 20S-protopanaxadiol 12- and 20-O-β-Dgalactopyranosides.     

<Emphasis Type="Italic">β</Emphasis>-Chloro-<Emphasis Type="Italic">α</Emphasis>,<Emphasis Type="Italic">β</Emphasis>-unsaturated carbonyls as convenient precursors of highly substituted benzenes

The Diels–Alder reactions of three β-chloro-α,β-unsaturated carbonyl compounds 1–3 with different dienes were carried out to afford highly functionalized cyclohexenes 4–9, bearing quaternary centers, in good yields. These cycloadducts (CAs) undergo dehydrochlorination with subsequent aromatization in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene DBU to produce new substituted benzenes 11–14. Compound 10 is the product of lactonization and removal of an HCl molecule from compound 7. All products were characterized by NMR, IR, elementary analysis and some of them by MS. Structure assignments of isomers were carried out on the basis of NMR chemical shifts and coupling constants using 1D, 2D and heteronOe NMR techniques.