Stimulus-responsive polymeric nanoparticles for biomedical applications

Polymeric nanoparticles with unique properties are regarded as the most promising materials for biomedical applications including drug delivery and in vitro/in vivo imaging.Among them,stimulus-responsive polymeric nanoparticles,usually termed as intelligent nanoparticles,could undergo structure,shape,and property changes after being exposed to external signals including pH,temperature,magnetic field,and light,which could be used to modulate the macroscopical behavior of the nanoparticles.This paper reviews ...     

刺激响应型生物医用聚合物纳米粒子研究进展

近十几年来, 纳米科学的发展极大地推动了纳米材料在生物医用领域的应用. 聚合物纳米粒子由于其独特的性能在药物传递、医学成像等医用领域备受关注. 其中, 刺激响应型聚合物纳米粒子是一类可以在外界信号刺激下(包括pH、温度、磁场、光等)发生结构、形状、性能改变的纳米粒子. 利用这种刺激响应性可调节纳米粒子的某种宏观行为, 故而刺激响应型聚合物纳米粒子也被称为智能纳米粒子. 因为其特有的“智能性”, 刺激响应型聚合物纳米粒子的研究已成为当前生物材料领域的研究热点. 本文综述了几类重要的生物医用刺激响应型聚合物纳米粒子, 侧重介绍双重及多重刺激响应型聚合物纳米粒子的制备及其生物医学应用.     

Multifunctional polymeric materials for biomedical applications

The work performed by our research group during the last few years in the area of bioerodible-biodegradable polymers as designed to the formulation of systems for the controlled delivery of drugs and as specific sorbents of uraemic toxins is broadly reviewed. In particular, attention has been focused on the strategies adopted in the preparation of functional polymers containing hydroxyl or carboxyl groups, suitable to establish specific bonding and non-bonding interactions with conventional and proteic drugs.     

Synthesis of conductive polymeric nanoparticles with hyaluronic acid based bioactive stabilizers for biomedical applications

In recent years, the use of organic materials to infer conductivity in biomedical devices has received increasing attention. Typical inorganic semiconductors and conductors are rigid and expensive, usually require multiple processing steps and are unsuitable for biomedical applications. Electrochemically or chemically doped conjugated polymers help to overcome these problems due to their stability, low cost, light weight and excellent electrical and optical properties. The conducting polymer poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) is the material of choice for biomedical applications as it is water soluble, however, there are growing concerns around its stabilizer, PSS, due to its release of acidic products upon degradation in-vivo. Here, we report the successful synthesis of PEDOT nanoparticles using hyaluronic acid (HA) as a stabilizer via an oxidative miniemulsion polymerisation technique. This improves the bioactivity and hydrophilicity of nanoparticles. The effect of varying amounts of HA and different molar ratios of EDOT:TOS has been studied and their role in the conductive and morphological properties of final nanoparticles has been fully elucidated. Furthermore, bioactivity and biocompatibility of the nanoparticles are demonstrated for customizable in vivo applications. Nanoparticles were found to have a conductivity up to 10 times greater than pristine PEDOT:PSS with increased addition of oxidant. The proposed easy-to-manufacture approach, along with the highlighted superior properties, expands the potential of conductive polymers in future customizable biological applications such as tissue scaffolds, nerve conduits and cardiac patches and represents a real breakthrough from the current state of the art.     

Recent progress in conductive polymeric materials for biomedical applications

Advanced polymeric materials undoubtedly constitute one of the most promising classes of new materials due to their intriguing electronic, optical, and redox properties. The incredible progress in this area has been driven by the development of novel synthetic procedures owing to the emergence of nanotechnology and by the large array of applications. In particular, hybridization of polymeric materials with nanomaterials has allowed the production of promising functional materials with tailored properties and functionalities for targeted biomedical applications. Consequently, sufficient researchers have carried out imperative studies on these advanced polymeric materials over the last decade. Beyond scientific and fundamental interest, such advanced materials are conspicuous from technological perspectives as well. In this review, we accentuate the proliferation of advanced polymeric materials in diverse biomedical applications.     

STING-activating drug delivery systems:Design strategies and biomedical applications

The stimulator of interferon genes(STING) shows promising clinical activity in infectious diseases and tumors.However,the lack of targeting capability and intracellular stability of STING agonists severely limits the therapeutic efficacy.Recently,drug delivery systems(DDSs) overcome these delivery barriers of STING agonists via passive or active cell targeting,prolonged blood circulation and drug release,and lysosome escape,etc.In this review,we will describe in detail how existing DDSs are designed to overcome delivery barriers and activate the STING pathway,and the current biomedical applications of STING-activating DDSs in the treatments of infectious diseases and tumors.Finally,the prospects and challenges of DDSs in STING activation are discussed.     

Mesoporous silica nanoparticles in biomedical applications

This tutorial review provides an outlook on nanomaterials that are currently being used for theranostic purposes, with a special focus on mesoporous silica nanoparticle (MSNP) based materials. MSNPs with large surface area and pore volume can serve as efficient carriers for various therapeutic agents. The functionalization of MSNPs with molecular, supramolecular or polymer moieties, provides the material with great versatility while performing drug delivery tasks, which makes the delivery process highly controllable. This emerging area at the interface of chemistry and the life sciences offers a broad palette of opportunities for researchers with interests ranging from sol-gel science, the fabrication of nanomaterials, supramolecular chemistry, controllable drug delivery and targeted theranostics in biology and medicine.     

One-step fabrication of polymeric Janus nanoparticles for drug delivery

With its unique structure of two compartments, Janus particles can be used for many applications for which monomorphic particles are inadequate, including to be used as a drug delivery system to deliver multiple payloads with widely different solubility. Here we report on a fluidic nanoprecipitation system (FNPS), capable of fabricating biocompatible Janus polymeric nanoparticles comprised of the FDA-approved polymer poly(lactic-co-glycolic acid) (PLGA). The FNPS contains dual inlets, one for each half of the particle, that insert into the precipitation stream. The system provides a one-step approach for production of Janus polymeric particles with submicrometer diameters and is likely amenable to substantial scale-up. To the best of our knowledge, this is the first demonstration of biocompatible Janus nanoparticles that encapsulate a hydrophobic drug (paclitaxel) on one side and a hydrophilic drug (doxorubicin hydrochloride) on the other.     

Curcumin-loaded biocompatible thermoresponsive polymeric nanoparticles for cancer drug delivery

This study aims at the formulation of curcumin with biodegradable thermoresponsive chitosan-g-poly (N-vinylcaprolactam) nanoparticles (TRC-NPs) for cancer drug delivery. The spherical curcumin-loaded nanoparticles of size 220 nm were characterized, and the biological properties were studied using flow cytometry and cytotoxicity by MTT assay. The in vitro drug release was higher at above LCST compared to that at below LCST. TRC-NPs in the concentration range of 100-1000 μg/mL were non-toxic to an array of cell lines. The cellular localization of the curcumin-loaded TRC-NPs was confirmed from green fluorescence inside the cells. The time-dependent curcumin uptake by the cells was quantified by UV spectrophotometer. Curcumin-loaded TRC-NPs showed specific toxicity to cancer cells at above their LCST. Flow cytometric analysis showed increased apoptosis on PC3 compared to L929 by curcumin-loaded TRC-NPs. These results indicate that novel curcumin-loaded TRC-NPs could be a promising candidate for cancer drug delivery.     

Core/shell nanoparticles in biomedical applications

Nanoparticles have several exciting applications in different areas and biomedial field is not an exception of that because of their exciting performance in bioimaging, targeted drug and gene delivery, sensors, and so on. It has been found that among several classes of nanoparticles core/shell is most promising for different biomedical applications because of several advantages over simple nanoparticles. This review highlights the development of core/shell nanoparticles-based biomedical research during approximately past two decades. Applications of different types of core/shell nanoparticles are classified in terms of five major aspects such as bioimaging, biosensor, targeted drug delivery, DNA/RNA interaction, and targeted gene delivery.     

Design of polyglycidol-containing microspheres for biomedical applications

The paper presents a short review on the synthesis, characterisation and selected medical applications of poly(styrene/α-tert-butoxy-ω-vinylbenzyl-polyglycidol) (P(S/PGL)) microspheres. The soap-free emulsion-polymerisation of styrene and α-tert-butoxy-ω-vinylbenzyl-polyglycidol macromonomer (PGL) in water yielded core-shell microspheres with a low particle-diameter dispersity (ratio of the weight average particle diameter and the number average particle diameter). The interfacial fraction of PGL units, estimated by XPS, was in the range of 0–42 mole % depending on the concentration of the macromonomer in the polymerisation feed. The studies of adsorption of model proteins showed that the surface fraction of adsorbed protein was significantly reduced when the PGL interfacial fraction was higher than 40 mole %. The P(S/PGL) particles with covalently immobilised proteins were used for the preparation of photonic crystal assemblies suitable for applications in optical biosensors and the medical diagnostic test for the detection of Helicobacter pylori antibodies in the blood serum.     

Rational design and biomedical applications of DNA-functionalized upconversion nanoparticles

In this review, we mainly introduced recent progress of DNA-functionalized upconversion materials, providing an overview of the design and applications in biosensing, bioimaging and disease therapy. The challenges and future perspectives are also discussed, aiming to promote their applications in materials science and biomedicine.     

From polymeric particles to multifunctional nanocapsules for biomedical applications using the miniemulsion process

The miniemulsions process represents a versatile tool for the formation of polymeric nanoparticles consisting of different kinds of polymer as obtained by a variety of polymerization types ranging from radical, anionic, cationic, enzymatic polymerization to polyaddition, and polycondensation. The process perfectly allows the encapsulation of hydrophilic and hydrophobic liquids and solids in polymeric shells, molecularly dissolved dyes or other components. In combination with a specific functionalization of the nanoparticles' or nanocapsules' surfaces and the possibility to release substances in a defined way from the interior, complex nanoparticles or nanocapsules are obtained, which are ideally suited for application in biomedical application as marker and targeted drug‐delivery system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 493–515, 2010     

Design of polymeric nanoparticles for the encapsulation of monoacylglycerol

Dextran-covered nanoparticles were produced by two different processes: emulsion/solvent evaporation and nanoprecipitation for the encapsulation of monomyristin. The inner core was formed by poly(lactic acid) or by a hydrophobically modified dextran (carrying n-decyl chains). According to the core materials and/or to the process, the average size of nanoparticles as well as the extent of aggregate formation was modulated. It was shown that the presence of monomyristin induced significant modifications on the characteristics of the resulting suspension (size and aggregate formation). Varying the matrix polymer as well as the amount of monomyristin in the feed allowed obtaining nanoparticles with convenient size. The use of hydrophobically modified dextran as the matrix material appeared promising.     

Preparation and in vitro properties of redox-responsive polymeric nanoparticles for paclitaxel delivery

Rice-like polymeric nanoparticles (NPs) composed of a new redox-responsive polymer, poly(ethylene glycol)-b-poly(lactic acid) (MPEG-SS-PLA), were prepared to carry paclitaxel (PTX) for glutathione (GSH)-regulated drug delivery. The PTX-loaded MPEG-SS-PLA NPs were fabricated using an optimized oil-in-water emulsion/solvent evaporation method. The size and morphology of the prepared NPs were characterized by scanning electron microscopy (SEM). The SEM results demonstrate that the NPs were dispersed as individual particles and were rice-shaped. The PTX loading efficiency, in vitro release, and stability of the NPs were analyzed by high-performance liquid chromatography (HPLC). The HPLC results revealed that the NPs released almost 90% PTX within 96 h when GSH presented at intracellular concentrations, whereas only a very small PTX amount was released at plasma GSH levels. The in vitro cytotoxicities of the NPs against A549, MCF-7, and HeLa carcinoma cells were assessed using a standard methyl thiazolyl tetrazoliun (MTT) assay. The MTT assay results show that the NPs caused concentration- and time-dependent changes in cell viability. To investigate the cellular uptake of the PTX-loaded NPs, visual endocytosis assay was performed using the fluorescent dye coumarin-6 as a model drug. The endocytosis assay results reveal rapid penetration and intracellular accumulation of coumarin-6-loaded NPs, as well as rapid coumarin-6 dispersion from the NPs. Overall, these findings establish that the NPs containing the synthesized redox-responsive polymer MPEG-SS-PLA can be used as potential carrier systems for antitumor drug delivery.     

Analytical characterization of chitosan nanoparticles for peptide drug delivery applications

Chitosan-cyclodextrin hybrid nanoparticles (NPs) were obtained by the ionic gelation process in the presence of glutathione (GSH), chosen as a model drug. NPs were characterized by means of transmission electron microscopy and zeta-potential measurements. Furthermore, a detailed X-ray photoelectron spectroscopy study was carried out in both conventional and depth-profile modes. The combination of controlled ion-erosion experiments and a scrupulous curve-fitting approach allowed for the first time the quantitative study of the GSH in-depth distribution in the NPs. NPs were proven to efficiently encapsulate GSH in their inner cores, thus showing promising perspectives as drug carriers.     

Biomolecule-assisted synthesis of water-soluble silver nanoparticles and their biomedical applications

The application of nanoparticles in the biomedical field is an exciting interdisciplinary research area in current materials science. In the present study, size-tunable and water-soluble noble metal silver nanoparticles (Ag NPs) have been successfully synthesized with the assistance of glutathione (GSH). The as-synthesized Ag NPs are ready to bind covalently with a model protein (bovine serum albumin) in mild conditions. The optical property of surface-modifiable Ag NPs was extremely sensitive to their size and the surface modification, suggesting a potential in the biomedical analysis and detection. Furthermore, Ag NPs with an average diameter of ca. 6 nm effectively suppress the proliferation of human leukemic K562 cells in the dose- and time-dependent manners, suggesting the promising potential of Ag NPs in cancer therapy.     

Study on surfactant coating of polymeric nanoparticles for controlled delivery of anticancer drug

Biodegradable nanoparticles loaded with anticancer drug paclitaxel and appropriately coated with polyvinyl alcohol (PVA), polyethylene glycol (PEG) as well as d--tocopheryl polyethylene glycol 1000 succinate (TPGS) were produced and characterised by various analysis techniques such as laser light scattering (LLS) for particle size and size distribution, scanning electron microscopy (SEM) and atomic force microscopy (AFM) for particle morphology, X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared-Photoacoustic Spectroscopy (FTIR-PAS) for surface chemistry, and high performance liquid chromatography (HPLC) for drug encapsulation efficiency (EE) and in vitro release kinetics. The emphasis was given to the possible effects of surface coating on the physicochemical and pharmaceutical properties of paclitaxel loaded nanoparticles. It was found that the type and amount of the surfactant could significantly affect the drug EE in the nanoparticles, the particles characteristics and their in vitro release behaviour. The surfactants dominated on the nanoparticles surface and the coated nanoparticles displayed in spherical shape with relative smooth surface within the resolution scope of the equipment. The particle size and size distribution showed close relation to the surface coating, which may also be responsible for the drug encapsulation efficiency and the in vitro release kinetics. A favourable formulation of drug loaded nanoparticles of desired properties could be obtained by optimising the fabrication parameters.