三角形纳米银颗粒的制备及其热稳定性的研究

具有独特的光学和化学性质的纳米三角形银纳米颗粒在光电、催化和生物传感器等领域中有广泛的应用.提供一种简单的方法制备三角银纳米颗粒,对其进行表征研究,且详细讨论了其热力学稳定性.     

Toward a comprehensive understanding of textiles functionalized with silver nanoparticles

This article provides a comprehensive understanding of development of textiles functionalized with silver nanoparticles (AgNPs). There are three established methods to fabricate textiles functionalized with AgNPs, namely, solution‐immersion, layer‐by‐layer deposition, and sonochemical. In addition, several textile types such as cotton, wool, polyester, silk, cotton/polyester blend, polyamide, and regenerated cellulose have been used for the fabrication. The AgNP deposition mechanism on textiles is mainly due to electrostatic interaction between AgNPs and textile constituents. It was exhibited that the deposition of AgNPs on textiles can transform their textiles colors. In addition, it was demonstrated that the deposition of AgNPs on textiles is not permanent, particularly against washing treatment. Textiles modified with AgNPs have several promising applications such as antibacterial, antifungal, catalyst, electronic devices, water treatment, sun protection, air treatment, and surface‐enhanced Raman scattering, which are comprehensively discussed in this article. Future challenges in fabricating textiles functionalized with AgNPs remain on how this can be carried out to improve long‐term stabilization of AgNPs on textiles to achieve their permanent deposition by employing greener approaches.     

Size-controlled synthesis of monodispersed silver nanoparticles capped by long-chain alkyl carboxylates from silver carboxylate and tertiary amine

Monodispersed silver nanoparticles capped by long-chain alkyl carboxylates were prepared by the reaction of silver carboxylate with tertiary amine at 80 degrees C for 2 h. This approach is a unique, size-controlled synthetic method for the large-scale preparation of silver nanoparticles. Long-chain alkyl carboxylate derived from a precursor acts as a stabilizer to avoid the aggregation of silver nanoparticles and to control particle size. In addition, amine plays an important role both as a reagent to form a thermally unstable, amine-coordinated intermediate, bis(amine)silver(I) carboxylate, and as a mild reducing agent for the intermediate to produce nanoparticles at a low temperature. The silver core and carboxylate-capping ligand of silver nanoparticles were characterized by various techniques such as transmission electron microscopy, optical absorption spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, gas chromatograph mass spectroscopy, and thermogravimetric and differential thermal analysis. The diameter of the nanoparticles can be strongly influenced by the alkyl chain length and the structure of the carboxylate. The average diameters of the silver nanoparticles were controlled to less than 5 nm in the case of silver carboxylate with a single alkyl chain length of 13 or 17 carbon atoms. On the contrary, the average diameters of silver nanoparticles became large and polydisperse in the case of silver carboxylate with a chain length of 7 carbon atoms or a branched chain. In comparing triethylamine with trioctylamine, there was no obvious effect to regulate the size distribution of the nanoparticles because they could not function as a capping ligand of the nanoparticles due to their weak coordination to silver. In addition, the heat treatment of silver nanoparticles in solution rather than in the solid state was effective for the growth of particles while maintaining narrow size distributions.     

Ionic liquid behavior and high thermal stability of silver chloride nanoparticles: Synthesis and characterization

Silver chloride was found to be stable even after calcination at 650 °C for 10 h. SEM studies revealed the morphology of silver chloride as hexagonal particles. TEM studies show the size of silver chloride particles to have an average size of 6–7 nm. Thermal studies suggest that silver chloride nanoparticles behave like ionic liquid or molten salt in the range of 455–650 °C.     

Synthesis of size tunable monodispersed silver nanoparticles and the effect of size on SERS enhancement

Spherical and monodispersed silver nanoparticles (AgNPs) are ideal for fundamental research as the contribution from size and shape can be accounted for in the experimental design. In this paper a seeded growth method is presented, whereby varying the concentration of sodium borohydride-reduced silver nanoparticle seeds, different sizes of stable spherical nanoparticles with a low polydispersity nanoparticles are produced using hydroquinone as a selective reducing agent. The surface-enhanced Raman scattering (SERS) enhancement factor for each nanoparticle size produced (17, 26, 50, and 65 nm) was then assessed using three different analytes, rhodamine 6G (R6G), malachite green oxalate (MGO) and thiophenol (TP). The enhancement factor gives an indication of the Raman enhancement effect by the nanoparticle. Using non-aggregated conditions and two different laser excitation wavelength (633 nm and 785 nm) it is shown that an increase in particle size results in an increased enhancement for each analyte used.     

Study on thermal properties of organic ester phase-change material embedded with silver nanoparticles

This study investigates the thermal properties of new silver nano-based organic ester (SNOE) phase-change material (PCM) in terms of latent heat capacity, thermal conductivity and heat storage and release capabilities experimentally. Spherical-shaped surface-functionalized crystalline silver nanoparticles (AgNP) prepared were embedded in mass proportions of 0.1 through 5.0 wt% into the pure (base) PCM. Experimental results reveal that dispersion of AgNP into PCM was effective, only physical and no chemical interaction between AgNP and PCM has been exhibited; thereby phase-change temperature of SNOE PCMs were acceptable. These are essential characteristics for SNOE PCMs which signified their thermal and chemical stability on long term. Test results suggest that while compared to pure PCM, degree of supercooling was reduced by 11.7–6.8 % for aforesaid mass proportions of AgNP, whereas latent heat capacities decreased by 7.88 % in freezing and 8.91 % in melting. The interdependencies between thermophysical properties in improving nucleation and growth rate of stable SNOE PCM crystals were signified and discussed. Thermal conductivity of SNOE PCMs were enhanced from 0.284 to 0.765 W m^?1 K^?1 which was expected to be a 10–67 % increase for the above mass loading of AgNP. Furthermore, for SNOE PCMs enhancement span in freezing and melting cycles was improved by 41 and 45.6 %, respectively. Similarly, cooling and melting times were reduced by 30.8 and 11.3 %, respectively. Embedded AgNP helps to achieve improved thermophysical and heat storage characteristics for SNOE PCMs, which in turn can be considered as a potential candidate for cool thermal energy storage applications.     

Characterization of silver sulfadiazine-loaded solid lipid nanoparticles by thermal analysis

The aim of this study is the solid-state characterization of solid lipid nanoparticles (SLN) based on Compritol^® 888 (C888) and Lutrol^® F68 (F68), loaded with silver sulfadiazine (AgSD), used to develop sponge-like dressings to treat chronic skin ulcers such as decubitis and leg ulcers. Silver compounds like AgSD, in fact, are used to prevent and/or to treat wound colonization that could impair healing, also in the case of antibiotic-resistant bacteria. Thermal analysis, with support from powder X-ray diffractometry and Fourier transform infrared spectroscopy, is used to characterize lipid and drug bulk, unloaded and drug-loaded SLN. In particular, differential scanning calorimetry is used to investigate the degree of crystallinity and the solid-state modification of lipid, two parameters correlated to drug incorporation and drug release rates. The solid-state characterization demonstrates AgSD entrapment in C888 as a core enclosed into F68 shell. AgSD SLN are also stored at different temperatures 25 and 37 °C, respectively, to study the effect of storage conditions, that induce an increase of the lipid crystallinity index correlated to drug release from the lipid matrix.     

Green synthesis and characterization of monodispersed silver nanoparticles obtained using oak fruit bark extract and their antibacterial activity

Green synthesis of silver nanoparticles (Ag NPs) has been achieved using oak fruit bark extract as a reducing, capping and stabilizing agent. The biosynthesized Ag NPs were characterized using various techniques. UV–visible spectrum of prepared silver colloidal solution showed absorption maximum at 433 nm. X‐ray diffraction and transmission electron microscopy analysis revealed that Ag NPs have a face‐centred cubic structure being spherical in shape with an average particle size of 20–25 nm. The toxicity of the Ag NPs was tested on bacterial species such as Staphylococcus aureus, Bacillus subtilis, Pseudomonas aeruginosa and Escherichia coli by comparison based on diameter of inhibition zone in disc diffusion tests and minimum inhibitory concentration and minimum bactericidal concentration of NPs dispersed in liquid cultures. The antimicrobial activity of Ag NPs was greater towards Gram‐positive bacteria (S. aureus and B. subtilis) compared to Gram‐negative bacteria as determined using standard Kirby–Bauer disc diffusion assay and serial dilution. Copyright © 2016 John Wiley & Sons, Ltd.     

A novel method for preparing monodispersed polystyrene nanoparticles

A preparation manner for monodispersed polystyrene (PS) nanoparticles polymerized by using a novel addition procedure of a monomer is suggested. In systems containing a smaller amount of surfactant compared with conventional microemulsion polymerization, the polymerization processes consists of three stages: adding dropwise the first part of the monomer for a few minutes at 80°C and polymerizing for 1 h; adding collectively the residual part of the monomer and polymerizing at the same temperature for another 1 h; and then polymerizing at 85°C for another 1 h. Based on discussions on the nucleation mechanism of particles in the polymerization system, the influences of monomer weight added dropwise, and amounts of initiator and emulsifier on the size and distribution of PS particles were investigated. PS nanoparticles with smaller diameter such as a number-average diameter of 18.7 nm and better monodispersity were obtained since the dropped styrene amount was suitable under 20wt-% emulsifier amount and 3wt-% initiator amount based on the monomer. Translated from Journal of Nanjing University (Natural Science), 2006, 2 (in Chinese)     

Cellulose fibers modified with silver nanoparticles

Cellulose fibers modified with silver nanoparticles were prepared using N-methylmorpholine-N-oxide as a direct solvent and analyzed in this study. Silver nanoparticles were generated as a product of AgNO₃ reduction by means of three methods under varying light conditions (daylight and darkroom). Influence of generating conditions on the size, the type and the number weighting of created nanoparticles was examined. Dynamic Light Scattering technique (DLS) was used for determination of those parameters. DLS analysis showed that the best method, i.e. the one that allowed the generation of the greatest number of silver nanoparticles with the smallest diameter and the smallest agglomerates, was incubation of cellulose pulp with AgNO₃ in a darkroom for 24 h. Mechanical and hydrophilic properties of all obtained fibers were also determined. Results showed that the method of silver nanoparticles generation did not influence significantly mechanical and hydrophilic properties of the modified fibers, because in all cases only small decreases of the studied parameters were observed.     

Enhanced thermal and mechanical properties and biostability of polyurethane containing silver nanoparticles

A polyether-type polyurethane (PU) containing silver (Ag) nanoparticles (4-7 nm, 1.51 × 10⁻³-1.13 × 10⁻² wt-%) was prepared by mixing the waterborne PU with the nanoparticle suspension, casting and drying at 60 °C. The Ag nanoparticles were found to be well dispersed in PU. A significant increase in the thermal stability and mechanical properties of the polymer was demonstrated in the nanocomposite PU films, which was believed a result of induced crystallization in the presence of Ag nanoparticles. The biostability was tested in a rat subcutaneous model. After 19 days of implantation, the PU containing Ag showed enhanced biostability and lowered foreign body reaction. The effect of Ag on the stability of the PU polymer was even more remarkable over a wider range of particle contents than that of the gold nanoparticles previously studied.     

Dithiocarbamate-capped silver nanoparticles

Nanometer-sized silver particles were synthesized by using didecylamine dithiocarbamates as the protecting ligands. With control of the initial ligand-metal feed ratios, the core diameter of the resulting particles was found to vary from about 5 to 2.5 nm, as determined by transmission electron microscopic measurements. The core size dispersity was also found to decrease with increasing feed ratio. In UV-visible spectroscopic studies, the particle surface plasmon resonance peak diminished in intensity as the particle core size decreased, whereas in electrochemical measurements, smaller sized particles gave rise to well-defined quantized charging voltammetric features, in contrast to the featureless responses with the larger particles. Such single electron-transfer behaviors were consistent with those observed in STM measurements involving individual nanoparticles. Overall, this study provides an effective approach to the synthesis of stable nanometer-sized silver nanoparticles with interesting electronic and electrochemical properties.     

Solvent-adaptable silver nanoparticles

A simple and efficient way of obtaining silver nanoparticles that are dispersible both in organic and in aqueous solvents using a single capping agent is described. The silver nanoparticles are initially prepared in water in the presence of aerosol OT [sodium bis(2-ethylhexyl)-sulfosuccinate, AOT]. Thereafter, transfer of the AOT-capped silver nanoparticles to an organic phase is induced by the addition of a small amount of orthophosphoric acid during shaking of the biphasic mixture. The AOT-stabilized silver nanoparticles could be separated out from the organic phase in the form of a powder. The hydrophobic nanoparticles thus prepared are stable and are readily resuspended in a variety of other polar (including water) and nonpolar solvents without further surface treatment. The amphiphatic nature of the silver surface is brought about by a small orientational change in the AOT monolayer on the silver surface in response to the polarity of the solvent.     

Improvement of thermal stability of polypropylene using DOPO-immobilized silica nanoparticles

After the surface silylation with 3-methacryloxypropyltrimethoxysilane, silica nanoparticles were further modified by 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO). The immobilization of DOPO on silica nanoparticles was confirmed by Fourier transform infrared spectroscopy, UV–visible spectroscopy, magic angle spinning nuclear magnetic resonance, and thermogravimetric analysis. By incorporating the DOPO-immobilized silica nanoparticles (5?wt%) into polypropylene matrix, the thermal oxidative stability exhibited an improvement of 62?°C for the half weight loss temperature, while that was only 26?°C increment with incorporation of virgin silica nanoparticles (5?wt%). Apparent activation energies of the polymer nanocomposites were estimated via Flynn–Wall–Ozawa method. It was found that the incorporation of DOPO-immobilized silica nanoparticles improved activation energies of the degradation reaction. Based on the results, it was speculated that DOPO-immobilized silica nanoparticles could inhibit the degradation of polypropylene and catalyze the formation of carbonaceous char on the surface. Thus, thermal stability was significantly improved.     

Magnetic properties of monodispersed Ni/NiO core-shell nanoparticles

We have recently developed a method to fabricate monodispersed Ni/NiO core-shell nanoparticles by pulsed laser ablation. In this report, the size-dependent magnetic properties of monodispersed Ni/NiO core-shell nanoparticles were investigated. These nanoparticles were formed in two steps. The first was to fabricate a series of monodispersed Ni nanoparticles of 5 to 20 nm in diameter using a combination of laser ablation and size classification by a low-pressure differential mobility analyzer (DMA). The second step was to oxidize the surfaces of the Ni particles in situ to form core-shell structures. A superconducting quantum interference device (SQUID) magnetometer was used to measure the magnetic properties of nanostructured films prepared by depositing the nanoparticles at room temperature. Ferromagnetism was observed in the magnetic hysteresis loop of the nanostructured films composed of core-shell nanoparticles with core diameters smaller than the superparamagnetic limit, which suggests the spin of Ni core was weakly exchange coupled with antiferromagnetic NiO shell. In contrast, smaller nanoparticles with core diameters of 3.0 nm exhibited superparamagnetism. The drastic change in the hysteresis loops between field-deposited and zero-field-deposited samples was attributable to the strong anisotropy that developed during the magnetic-field-assisted nanostructuring process.     

Graphene nanofl akes and hybrid nanocomposites with gold and silver nanoparticles: optical and thermal properties

Russian Chemical Bulletin - New technologies for the preparation of graphene nanofl akes (GNF) with noble metal nanoparticles (NPs), specifi cally Au and Ag, as well as hybrid nanocomposites...     

Polyaniline-coated cellulose fibers decorated with silver nanoparticles

Cellulose fibers of 20 μm in diameter and aspect ratio of 2 or 10 were coated with protonated polyaniline (PANI) during the oxidation of aniline hydrochloride with ammonium peroxydisulfate in an aqueous medium. The presence of PANI has been proved by FTIR spectroscopy. The conductivity increased from 4.0 × 10⁻¹⁴ S cm⁻¹ to 0.41 S cm⁻¹ after coating the fibers with PANI. The percolation threshold in the mixture of original uncoated and PANI-coated fibers was reduced from 10 mass % PANI to 6 mass % PANI, as the aspect ratio changed from 2 to 10. The subsequent reaction with silver nitrate results in the decoration of PANI-coated cellulose fibers with silver nanoparticles of about 50 nm average size. The content of silver of up to 10.6 mass % was determined as a residue in thermogravimetric analysis. FTIR spectra suggest that the protonated emeraldine coating changed to the pernigraniline form during the latter process and, consequently, the conductivity of the composite was reduced to 4.1 × 10⁻⁴ S cm⁻¹, despite the presence of silver.     

Synthesis and self-assembly of highly monodispersed quasispherical gold nanoparticles

We report the synthesis of cetyltrimethylammonium bromide (CTAB) assisted seed mediated growth of highly pure and monodispersed quasispherical gold nanoparticles (QAuNPs) and their self-assembly on the silica/glass substrates. The seed-mediated growth approach was modified to prepare size-tunable monodispersed QAuNPs with sizes ranging from 20 to 150 nm. The larger, more uniform seeds and lower CTAB concentration resulted in the formation of relatively large QAuNPs with improved monodispersity (relative standard deviation (RSD) of ～5-8%) and high purity in their shapes. In addition, CATB-capped QAuNPs can be spontaneously assembled into closely packed and highly aligned superstructures with well-defined mutillayers (two to six layers) on silica substrates. Furthermore, CATB-capped QAuNPs can easily construct density-controllable QAuNP chips by electrostatic self-assembly, showing their promising applications for single-nanoparticle plasmonic sensors.     

Synthesis of silver nanoparticles with polystyrylcarboxylate ligands

Silver nanoparticles stabilized by polystyrylmonocaboxylate ligands with varied chain lengths are synthesized via the low-temperature reduction of silver polystyrylmonocaboxylate with triethylamine. Silver nanoparticles have small dimensions, narrow size distributions, high stability, and ability to redisperse in nonpolar solvents. The kinetic features of the reaction are studied via high-performance liquid chromatography; UV, visible and IR spectroscopy; and transmission electron microscopy. It is shown that the reduction of silver occurs in the cores of reverse micelle species organized by diphilic macromolecules of silver polystyrylmonocarboxylates.     

Synthesis of silver nanoparticles with different shapes

Today the synthesis of silver nanoparticles is very common due to their numerous applications in various fields. Silver nanoparticles have unique properties such as: optical and catalytic properties, which, depend on the size and shape of the produced nanoparticles. So, today the production of silver nanoparticles with different shapes which have various uses in different fields such as medicine, are noted by many researchers. This article, is an attempt to present an overview of the shape-controlled synthesis of silver nanoparticles using various methods.