Porphyrins bearing mono or tripodal benzylphosphonic acid tethers for attachment to oxide surfaces

The ability to attach redox-active molecules to oxide surfaces in controlled architectures (distance, orientation, packing density) is essential for the design of a variety of molecular-based information storage devices. We describe the synthesis of a series of redox-active molecules wherein each molecule bears a benzylphosphonic acid tether. The redox-active molecules include zinc porphyrins, a cobalt porphyrin, and a ferrocene-zinc porphyrin. An analogous tripodal tether has been prepared that is based on a tris[4-(dihydroxyphosphorylmethyl)phenyl]-derivatized methane. A zinc porphyrin is linked to the methane vertex by a 1,4-phenylene unit. The tripodal systems are designed to improve monolayer stability and ensure vertical orientation of the redox-active porphyrin on the electroactive surface. For comparison purposes, a zinc porphyrin bearing a hexylphosphonic acid tether also has been prepared. The synthetic approaches for introduction of the phosphonic acid group include derivatization of a bromoalkyl porphyrin or use of a dimethyl or diethyl phosphonate substituted precursor in a porphyrin-forming reaction. The latter approach makes use of dipyrromethane building blocks bearing mono or tripodal dialkyl phosphonate groups. The zinc porphyrin-tripodal compound bearing benzylphosphonic acid legs tethered to a SiO(2) surface (grown on doped Si) was electrically well-behaved and exhibited characteristic porphyrin oxidation/reduction waves. Collectively, a variety of porphyrinic molecules can now be prepared with tethers of different length, composition, and structure (mono or tripodal) for studies of molecular-based information storage on oxide surfaces.     

Synthesis of porphyrins bearing hydrocarbon tethers and facile covalent attachment to si(100)

The use of redox-active molecules as the active storage elements in memory chips requires the ability to attach the molecules to an electroactive surface in a reliable and robust manner. To explore the use of porphyrins tethered to silicon via carbosilane linkages, 17 porphyrins have been synthesized. Fourteen porphyrins bear a tether at a single meso site, and three porphyrins bear functional groups at two beta sites for possible two-point attachment. Two high-temperature processing methods (400 degrees C under inert atmosphere) have been developed for rapid (minutes), facile covalent attachment to Si platforms. The high-temperature processing conditions afford attachment either by direct deposition of a dilute solution (1 microM-1 mM) of the porphyrin sample onto the Si substrate or sublimation of a neat sample onto the Si substrate. The availability of this diverse collection of porphyrins enables an in-depth examination of the effects of the tether (length, composition, terminal functional group, number of tethers) and steric bulk of nonlinking substituents on the information-storage properties of the porphyrin monolayers obtained upon attachment to silicon. Attachment proceeds readily with a wide variety of hydrocarbon tethers, including 2-(trimethylsilyl)ethynyl, vinyl, allyl, or 3-butenyl directly appended to the porphyrin and iodo, bromomethyl, 2-(trimethylsilyl)ethynyl, ethynyl, vinyl, or allyl appended to the 4-position of a meso-phenyl ring. No attachment occurs with substituents such as phenyl, p-tolyl, mesityl, or ethyl. Collectively, the studies show that the high-temperature attachment procedure (1) has broad scope encompassing diverse functional groups, (2) tolerates a variety of arene substituents, and (3) does not afford indiscriminate attachment. The high-temperature processing conditions are ideally suited for use in fabrication of hybrid molecular/semiconductor circuitry.     

Porphyrin architectures tailored for studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Zinc porphyrins tethered to Au(111) or Si(100) provide a benchmark for studies of information storage. Three sets of porphyrins have been synthesized for studies of the interplay of molecular design and charge-storage properties: (1) A set of porphyrins is described for probing the effect of surface attachment atom on electron-transfer kinetics. Each porphyrin bears a meso-CH2X group for surface attachment where X = OH, SAc, or SeAc. (2) A set of porphyrins is described for studying the effect of surface-charge density in monolayers. Each porphyrin bears a benzyl alcohol for surface attachment and three nonlinking meso substituents of a controlled degree of bulkiness. (3) A set of porphyrins is described that enables investigation of on-chip patterning of the electrolyte. Each porphyrin bears a formyl group distal to the surface attachment group for subsequent derivatization with a molecular entity that comprises the electrolyte. Taken together, this collection of molecules enables a variety of studies to elucidate design issues in molecular-based information storage.     

Synthesis of thiol-derivatized ferrocene-porphyrins for studies of multibit information storage

One approach toward storage of multiple bits of information at the molecular level requires the construction of molecular architectures comprised of multiple redox-active units. Four new ferrocene-porphyrins have been synthesized to investigate questions concerning (1) the scope of redox-active molecules that can be employed in molecular information-storage schemes and (2) writing/reading rates as well as retention of charge in redox-active units located at different sites in a molecular architecture. Three of the ferrocene-porphyrins have linkers of different lengths between the ferrocene and porphyrin. The fourth ferrocene-porphyrin has two ferrocenes positioned at the lateral sites on the porphyrin. The latter architecture is designed to provide a shorter distance between the electroactive surface and the ferrocene while maintaining an upright orientation of the porphyrin. Each ferrocene-porphyrin affords three cationic oxidation states (ferrocene monocation, porphyrin monocation, porphyrin dication) in addition to the neutral state, thereby affording the capability of storing two bits of information. Each ferrocene-porphyrin bears an S-acetyl or S-(N-ethyl)carbamoyl-protected thiol moiety, thereby avoiding handling of free thiols. Each ferrocene-porphyrin forms a self-assembled monolayer (SAM) on gold via in situ cleavage of the thiol protecting group. The SAM of each array is electrochemically robust and exhibits three well-resolved, reversible oxidation waves.     

Synthesis of "Porphyrin-linker-Thiol" molecules with diverse linkers for studies of molecular-based information storage

The attachment of redox-active molecules such as porphyrins to an electroactive surface provides an attractive approach for electrically addressable molecular-based information storage. Porphyrins are readily attached to a gold surface via thiol linkers. The rate of electron transfer between the electroactive surface and the porphyrin is one of the key factors that dictates suitability for molecular-based memory storage. This rate depends on the type and length of the linker connecting the thiol unit to the porphyrin. We have developed different routes for the preparation of thiol-derivatized porphyrins with eight different linkers. Two sets of linkers explore the effects of linker length and conjugation, with one set comprising phenylethyne units and one set comprising alkyl units. One electron-deficient linker has four fluorine atoms attached directly to a thiophenyl unit. To facilitate the synthesis of the porphyrins, convenient routes have been developed to a wide range of aldehydes possessing a protected S-acetylthio group. An efficient synthesis of 1-(S-acetylthio)-4-iodobenzene also has been developed. A set of porphyrins, each bearing one S-acetyl-derivatized linker at one meso position and mesityl moieties at the three remaining meso positions, has been synthesized. Altogether seven new aldehydes, eight free base porphyrins and eight zinc porphyrins have been prepared. The zinc porphyrins bearing the different linkers all form self-assembled monolayers (SAMs) on gold via in situ cleavage of the S-acetyl protecting group. The SAM of each porphyrin is electrochemically robust and exhibits two reversible oxidation waves.     

Investigation of tightly coupled porphyrin arrays comprised of identical monomers for multibit information storage

Our prior designs for molecular-based information storage devices have employed multiple redox-active units organized in weakly coupled, covalently linked arrays. To explore a simpler design, we report here the synthesis of porphyrin arrays where porphyrins with identical oxidation potentials are directly linked to one another instead of joined via a molecular linker. Oxidative coupling with AgPF(6) of zinc(II)-5,15-bis(4-tert-butylphenyl)-10-phenylporphyrin, obtained by a rational synthesis, afforded the expected dimer joined by a meso-meso linkage and an unexpected trimer joined by meso-meso linkages. For attachment to an electroactive surface we synthesized a meso-linked porphyrin dimer with a thiol-linker in one of the meso positions. The S-acetyl protecting group was used to avoid handling free thiol groups. Coupling of zinc(II)-5,10,15-tris(3, 5-di-tert-butylphenyl)porphyrin ("upper half") and zinc(II)-5-[4-(S-acetylthio)phenyl]-10,20-bis(3, 5-di-tert-butylphenyl)porphyrin ("lower half") afforded three different meso-linked dimers with the desired dimer as the main product. Electrochemical examination of the meso-linked dimer in solution shows that the first two oxidation potentials of the array differ by approximately 0.15 V and straddle the value exhibited by the monomeric constituents. The third and fourth oxidation potentials of the array are also split although to a lesser extent ( approximately 0.08 V) than the first and second. For the meso-linked trimer, the first three oxidation waves are also split; however, these waves are severely overlapped. The electrochemical behavior of the dimers and trimer is indicative of strong electronic interactions among the porphyrins. The thiol-derivatized meso-linked dimers form self-assembled monolayers (SAMs) on gold via in situ cleavage of the S-acetylthio protecting group. The porphyrin SAM exhibits four well-resolved oxidation waves. Regardless, the meso-meso linkage is relatively unstable upon formation of the pi-cation radical(s). This characteristic indicates that the structural motif is of limited utility for molecular information storage elements.     

Electrochemically programmed, spatially selective biofunctionalization of silicon wires

A method for the spatially selective biofunctionalization of silicon micro- and nanostructures is reported, and results are presented for both single-crystal silicon (111) or (100) surfaces. An electroactive monolayer of hydroquinone was formed on the surface of H-terminated silicon working electrodes via an olefin reaction with UV-generated surface radicals. Molecules presenting either cyclopentadiene or a thiol group can be immobilized onto the regions where the hydroquinone has been oxidized. Molecular size and crystal orientation are evaluated as important factors that dictate the electrode stability in aqueous solution under anodic potentials. Monolayers composed of smaller molecules on (111) surfaces exhibit the highest packing density and are more effective in preventing anodic oxidation of the underlying substrate. Voltammetry, X-ray photoelectron spectroscopy, and atomic force and fluorescence microscopy are utilized to interrogate the kinetic rates of biofunctionalization, the extent of surface coverage, monolayer quality, and the spatial selectivity of the process.     

Synthesis of thiol-derivatized porphyrin dimers and trimers for studies of architectural effects on multibit information storage

We present the rational design and synthesis of multiporphyrin arrays containing thiol-derivatized linkers for the purpose of multibit molecular information storage. Porphyrin dimers and trimers were synthesized by the Pd-mediated coupling of iodo-substituted and ethynyl-substituted porphyrin building blocks in 5-51% yields. Each porphyrin dimer bears one S-acetylthio group. The architecture of the trimers incorporates a trans-substituted porphyrin (central) bearing two S-acetylthio groups and two diphenylethyne-linked porphyrins (wings) in a trans geometry. The central porphyrin and the wing porphyrins bear distinct substituents and central metals, thereby affording different oxidation potentials. The S-acetylthio groups provide a means for attachment of the arrays to an electroactive surface. The dimers are designed for vertical orientation on an electroactive surface while the trimers are designed for horizontal orientation of the central porphyrin. Altogether seven different arrays were synthesized. Each array forms a self-assembled monolayer (SAM) on gold via in situ cleavage of the S-acetyl protecting group. The SAM of each array is electrochemically robust and exhibits multiple, reversible oxidation waves. In general, however, the trimeric arrays appear to form more highly ordered monolayers that exhibit sharper, better-defined redox features.     

Diverse redox-active molecules bearing identical thiol-terminated tripodal tethers for studies of molecular information storage

To examine the effects of molecular structure on charge storage in self-assembled monolayers (SAMs), a family of redox-active molecules has been prepared wherein each molecule bears a tether composed of a tripodal linker with three protected thiol groups for surface attachment. The redox-active molecules include ferrocene, zinc porphyrin, ferrocene-zinc porphyrin, magnesium phthalocyanine, and triple-decker lanthanide sandwich coordination compounds. The tripodal tether is based on a tris[4-(S-acetylthiomethyl)phenyl]-derivatized methane. Each redox-active unit is linked to the methane vertex by a 4,4'-diphenylethyne unit. The electrochemical characteristics of each compound were examined in solution and in SAMs on Au. Redox-kinetic measurements were also performed on the SAMs (with the exception of the magnesium phthalocyanine) to probe (1) the rate of electron transfer in the presence of an applied potential and (2) the rate of charge dissipation after the applied potential is disconnected. The electrochemical studies of the SAMs indicate that the tripodal tether provides a more robust anchor to the Au surface than does a tether with a single site of attachment. However, the electron-transfer and charge-dissipation characteristics of the two tethers are generally similar. These results suggest that the tripodal tether offers superior stability characteristics without sacrificing electrochemical performance.     

Porphyrin dyads bearing carbon tethers for studies of high-density molecular charge storage on silicon surfaces

Redox-active molecules that afford high charge density upon attachment to an electroactive surface are of interest for use in molecular-based information-storage applications. One strategy for increasing charge density is to covalently link a second redox center to the first in an architecture that uses the vertical dimension in essentially the same molecular footprint. Toward this end, a set of four new porphyrin dyads have been prepared and characterized. Each dyad consists of two zinc porphyrins, an intervening linker (p-phenylene or 4,4'-diphenylethyne), and a surface attachment group (ethynyl or triallyl group). The porphyrin dyads were attached to an electroactive Si(100) surface and interrogated via electrochemical and FTIR techniques. The charge density obtainable for the ethynyl-functionalized porphyrin dyads is approximately double that observed for an analogously functionalized monomer, whereas that for the triallyl-functionalized dyads is at most 40% larger. These results indicate that the molecular footprint of the former dyads is similar to that of a monomer while that of the latter dyads is larger. For both the ethynyl- and triallyl-functionalized porphyrin dyads, higher charge densities (smaller molecular footprints) are obtained for the molecules containing the 4,4'-diphenylethyne versus the p-phenylene linker. This feature is attributed to the enhanced torsional flexibility of the former linker compared with that of the latter, which affords better packed monolayers. The FTIR studies indicate that the adsorption geometry of all the dyads is qualitatively similar and similar to that of monomers. However, the dyads containing the 4,4'-diphenylethyne linker sit somewhat more upright on the surface than those containing the p-phenylene linker, generally consistent with the smaller molecular footprint for the former dyads. Collectively, the high surface charge density (34-58 muC.cm(-)(2)) of the porphyrin dyads makes these constructs viable candidates for molecular-information-storage applications.     

Triple-decker sandwich compounds bearing compact triallyl tripods for molecular information storage applications

The design of redox-active molecules that afford multistate operation and high charge density is essential for molecular information storage applications. Triple-decker sandwich compounds composed of two lanthanide metal ions and three porphyrinic ligands exhibit a large number of oxidation states within a relatively narrow electrochemical window. High charge density requires a small footprint upon tethering triple deckers to an electroactive surface. All triple deckers examined to date for information storage have been tethered via the terminal ligand and have exhibited large footprints (approximately 670 A2). Five new homonuclear (Eu or Ce) triple deckers have been prepared (via statistical or rational methods) to examine the effect of tether attachment site on molecular footprint. Three triple deckers are tethered via the terminal ligand (porphyrin) or central ligand (porphyrin or imidazophthalocyanine), whereas two triple deckers each bear two tethers, one at each terminal ligand. The tether is a compact triallyl tripod. Monolayers of the triple deckers on Si(100) were examined by electrochemical and FTIR techniques. Each triple decker exhibited the expected four resolved voltammetric waves, owing to formation of the mono-, di-, tri-, and tetracations. The electrochemical studies of surface coverage (gamma, obtained by integrating the voltammetric waves) reveal that coverages approaching 10(-10) mol cm(-2), corresponding to a molecular footprint of approximately 170 A2, are readily achieved for all five of the triple deckers. The surface coverage observed for the tripodal functionalized triple deckers is approximately 4-fold higher than that obtained for monopodal-functionalized triple deckers (carbon, oxygen, or sulfur anchor atoms) attached to either Si(100) or Au(111). The fact that similar, relatively high, surface coverages can be achieved regardless of the location (or number) of the tripodal tether indicates that the tripodal functionalization, rather than the location of the tether, is the primary determinant of the packing density.     

Self-assembled Alkylation of Atomically Flat Hydrogen-terminated Silicon (111) Surface By Using Highly Polarized Fluoroalkylsilane

Hydrogen-terminated silicon surface is of technological importance to semiconductor processes such as pre-gate^[1]. Re-contamination and re-oxidation on silicon surface become more stringent issues in order to meet the requirements in the process for producing reduced size IC chips. The modification of silicon surfaces by various strategies has attracted more attention in the past few years^[2-4]. The frequently used techniques to attach functional groups to silicon surfaces are via chemical^[2], photochemical^[3] and electrochemical reactions^[4]. Various ways to attach monlayers to silicon surfaces has been reported, including alkylation of silicon with alkenes, alkyenes, aldehydes, alcohols and Grigard reagents under photoactivated or catalytic reactions. Particularly, porous silicon prepared by chemical or electrochemical treatments has been extensively studied. Preparation of passivated layers on porous silicon surfaces has disadvantages that the silicon surfaces are damaged by reactive agents during the reaction or become porous for attachment of molecules. Recently, self-assembled monolayer of alcohols on porous silicon was reported at modest heating without the aid of catalyst or photoexcitation or potential^[5]. In the paper, we report a novel method to attach highly polarized fluoroalkylsilane on atomically flat Si(111) surface at room temperature and to form a self-assembled monolayer to prevent the silicon surface from re-contamination and re-oxidation.     

Application of structural analogs of dimercaptosuccinic acid-functionalized silica nanoparticles (DMSA-[silica]) to adsorption of mercury, cadmium, and lead

In order to gain additional insight into mercury selectivity with nano-sized DMSA-[silica], we investigated a series of ligands related to DMSA, these are: monomercaptosuccinic acid; MMSA, 2-mercapto-4-methyl-5-thiazoleacetic acid; MCT, ortho-thiosalicylic acid; o-TSA and para-thiosalicylic acid; p-TSA. The MMSA chelate is structurally similar to DMSA except that it has only one thiol group. The chelates o-TSA and p-TSA each have one thiol and one carboxylic acid group. MCT includes neutral S and N atoms in close proximity to the thiolate binding site. MCT, o-TSA and p-TSA resemble each other in having equal numbers of carboxylic acid and thiol groups and formation of amide bonds with the linker on silica is expected to eliminate the carboxylate binding sites, making thiolates the only binding sites for Hg(II), Cd(II), and Pb(II) metals ions in the nano-sized; MMSA-[silica], MCT-[silica], o-TSA-[silica], and p-TSA-[silica]. Each of the nano-sized MMSA-[silica], MCT-[silica], o-TSA-[silica], and p-TSA-[silica], show a higher preference for Hg(II) over Cd(II) and Pb(II) compared to the same free chelates in solution, respectively. In addition, there are differences in the level of metal ion chelation for each functionalized silica nanoparticle. These differences in the degree of metal chelation for each functionalized silica nanoparticles surface are explained by the difference in thiolate/carboxylate ratio upon attachment to the surface and on steric reasons based on the orientation of the thiol groups on the surface. When attached via amide bond formation, the thiolate site in o-TSA-[silica] will face towards the silica surface, while for p-TSA-[silica], the thiolate site is expected to be pointed outwards and away from the silica surface. In comparing MMSA-[silica] to DMSA-[silica], the thiolate/carboxylate ratio decreases from 2/1 in DMSA-[silica] to 1/1 in MMSA-[silica] (assuming attachment via one amide bond in each case). This effect of increasing the ratio of thiolate to carboxylate upon attachment to the surface is believed to play a role in the selectivity enhancement towards Hg(II) over Cd(II) and Pb(II).     

An infrared study of adsorbed metal ions on modified silica: Comparative chelation between mercury, cadmium, and lead divalent ions to silica functionalized with ortho- and para-aminothiophenoles

Chelating selectivity and capacity of silica functionalized 2- and 4-aminothiophenoles (2-ASP-[silica] and 4-ASP-[silica]) toward mercury, lead, and cadmium ions in aqueous medium are studied. In this comparative study, the three metal ions were allowed to interact individually and simultaneously with two aminothiophenol (ASP) derivatives namely, 2- and 4-ASP once as free chelates in solution and secondly as immobilized chelates on silica. Upon individually or simultaneously interacting the three metal ions with 4-ASP-[silica], Hg(II) ions are preferentially adsorbed where 100% of Hg(II) is removed compared to 83.0% of Pb(II) and 76% of Cd(II) ions. In solution, Hg(II) ions are found to be preferentially adsorbed by 2-ASP when compared to 4-ASP. Whereas, anchoring 4-ASP to a silica surface via amide linkage provides a significant enhancement in selectivity and extent of chelation toward Hg(II) over Cd(II) and Pb(II) ions. In the case of 4-ASP-[silica], the existence of a free SH group allows an easy-accessible and strain-free binding site for the incoming Hg(II) ions. Whereas, in 2-ASP-[silica], the SH group is sterically hindered due to proximity to the point of attachment with the surface. As a result, 2-ASP-[silica] showed less potential for Hg(II) binding compared to the modified analogue, 4-ASP-[silica] with less chelation extent observed in solution compared to that observed at the surface.     

Self assembled films of porphyrins with amine groups at different positions: influence of their orientation on the corrosion inhibition and the electrocatalytic activity

Self-assembled molecular films of two cobalt porphyrins with amine groups at different positions-(5,10,15,20-tetrakis-(2-aminophenyl) porphyrin-cobalt(II), [Co(II) (T(o-NH(2))PP)] and (5,10,15,20-tetrakis-(4-aminophenyl) porphyrin-cobalt(II), [Co(II)(T(p-NH(2))PP)]-were formed on a gold substrate. The functionalized surfaces were characterized using Raman spectroscopy, atomic force microscopy and electrochemical methods. Both modified gold surfaces completely mask the charge transfer of a [Fe(CN)(6)](3-/4-) redox couple in solution, indicating the layer is highly resistive in behavior. Electrochemical impedance spectroscopy analyses revealed that the porphyrin film with amine groups at ortho positions shows a higher charge-transfer resistance with a better protective behavior compared to the para position modified surface. Raman, AFM and EIS data suggests that an ortho amine positioned molecule forms a more compact layer compared to the para-positioned molecule. This can be explained in terms of their orientation on the gold surface. [Co(II)(T(o-NH(2))PP)] adopted a saddle shape orientation whereas [Co(II)(T(p-NH(2))PP)] adopted a flat orientation on the gold surface. The porphyrin modified gold electrode catalyzes the oxygen reduction at lower potentials compared to the bare gold electrode. The shift in the overvoltage was higher in case of molecules with flat orientation compared to the saddle shaped oriented porphyrin molecules on the surface.     

Facile Synthesis and Enhanced Nonlinear Optical Properties of Porphyrin‐Functionalized Multi‐Walled Carbon Nanotubes

Two multi‐walled carbon nanotube (MWCNT)‐based nanohybrids, MWCNT–ZnTPP and MWCNT–TPP (TPP=5‐[4‐{2‐(4‐formylphenoxy)‐ ethyloxy}phenyl]‐10,15,20‐triphenylporphyrin, ZnTPP=5‐[4‐{(4‐formylphenyl)ethynyl}phenyl]‐10,15,20‐triphenylporphinatozinc(II)), were prepared directly from pristine MWCNTs through 1,3‐dipolar cycloaddition reactions. Covalent attachment of the porphyrins to the surfaces of the MWCNTs was confirmed by Fourier transform infrared spectroscopy, ultraviolet/visible absorption, fluorescence, Raman, and X‐ray photoelectron spectroscopy, elemental analysis, transmission electron microscopy, and thermogravimetric analysis. Attachment of the porphyrin moieties to the surface of the MWCNTs significantly improves the solubility and ease of processing of these MWCNT–porphyrin composite materials. Z‐scan studies reveal that these MWCNT–porphyrin nanohybrids exhibit enhanced nonlinear optical properties under both nanosecond and picosecond laser pulses at λ=532 nm in comparison with free MWCNTs and the free porphyrin chromophores, whereas superior optical limiting performance was displayed by MWCNT–porphyrin composite materials rather than MWCNTs/ZnTPP and MWCNTs/TPP blends, which is consistent with a remarkable accumulation effect as a result of the covalent linkage between the porphyrin and the MWCNTs.     

Ruthenium porphyrin functionalized single-walled carbon nanotube arrays--a step toward light harvesting antenna and multibit information storage

Ruthenium porphyrin functionalized single-walled carbon nanotube arrays have been prepared using coordination of the axial position of the metal ion onto 4-aminopyridine preassembled single-walled carbon nanotubes directly anchored to a silicon(100) surface (SWCNTs-Si). The formation of these ruthenium porphyrin functionalized single-walled carbon nanotube array electrodes (RuTPP-SWCNTs-Si) has been monitored using infrared spectroscopy (IR), differential pulse voltammetry (DPV), atomic force microscopy (AFM), laser desorption time-of-flight mass spectroscopy (LDI-TOF-MS), UV-vis spectroscopy, fluorescence spectroscopy, and cyclic voltammetry. Electrochemical results show two successive one-electron reversible redox waves. The surface concentration of the ruthenium porphyrin molecules is 3.44 x 10 (-8) mol cm (-2). Optical results indicate that the immobilization of ruthenium porphyrin enhances the light absorption of SWCNTs-Si surfaces in the visible light region. Moreover mixed assembly of ferrocene/porphyrin onto carbon nanotube arrays has been achieved by altering the ratio of two redox-active species in the deposition solution. These results suggest the ruthenium porphyrin modified electrodes are excellent candidates for molecular memory devices and light harvesting antennae.     

Investigation of stepwise covalent synthesis on a surface yielding porphyrin-based multicomponent architectures

Porphyrins have been shown to be a viable medium for use in molecular-based information storage applications. The success of this application requires the construction of a stack of components ("electroactive surface/tether/charge-storage molecule/linker/electrolyte/top contact") that can withstand high-temperature conditions during fabrication (up to 400 degrees C) and operation (up to 140 degrees C). To identify suitable chemistry that enables in situ stepwise synthesis of covalently linked architectures on an electroactive surface, three sets of zinc porphyrins (22 altogether) have been prepared. In the set designed to form the base layer on a surface, each porphyrin incorporates a surface attachment group (triallyl tripod or vinyl monopod) and a distal functional group (e.g., pentafluorophenyl, amine, bromo, carboxy) for elaboration after surface attachment. A second set designed for in situ dyad construction incorporates a single functional group (alcohol, isothiocyanato) that is complementary to the functional group in the base porphyrins. A third set designed for in situ multad construction incorporates two identical functional groups (bromo, alcohol, active methylene, amine, isothiocyanato) in a trans configuration (5,15-positions in the porphyrin). Each porphyrin that bears a surface attachment group was found to form a good quality monolayer on Si(100) as evidenced by the voltammetric and vibrational signatures. One particularly successful chemistry identified for stepwise growth entailed reaction of a surface-tethered porphyrin-amine with a dianhydride (e.g., 3,3',4,4'-biphenyltetracarboxylic dianhydride), forming the monoimide/monoanhydride. Subsequent reaction with a diamine (e.g., 4,4'-methylene-bis(2,6-dimethylaniline)) gave the bis(imide) bearing a terminal amine. Repetition of this stepwise growth process afforded surface-bound oligo-imide architectures composed of alternating components without any reliance on protecting groups. Taken together, the ability to prepare covalently linked constructs on a surface without protecting groups in a stepwise manner augurs well for the systematic preparation of a wide variety of functional molecular devices.     

Synthesis of thiol-derivatized europium porphyrinic triple-decker sandwich complexes for multibit molecular information storage

The storage of multiple bits of information at the molecular level requires molecules with a large number of distinct oxidation states. Lanthanide triple-decker sandwich molecules employing porphyrins and phthalocyanines afford four cationic states and are very attractive for molecular information storage applications. Five triple-decker building blocks have been prepared of the type (phthalocyanine)Eu(phthalocyanine)Eu(porphyrin), each bearing one iodo, one ethyne, or one iodo and one ethyne group attached to the porphyrin unit. Two triple-decker building blocks with different oxidation potentials were derivatized with an S-acetylthiophenyl unit for attachment to an electroactive surface. To explore the preparation of arrays comprised of triple deckers, which may lead to the storage of a larger number of bits, two types of dyads of triple deckers were prepared. An ethyne-linked dyad of triple deckers bearing one S-acetylthiophenyl unit was prepared via repetitive Sonogashira couplings, and a butadiyne-linked dyad was prepared via a modified Glaser coupling. The triple deckers were characterized by absorption spectroscopy, laser-desorption mass spectrometry, and (1)H NMR spectroscopy. The thiol-derivatized triple deckers form self-assembled monolayers (SAMs) on gold via in situ cleavage of the thiol protecting group. The SAM of each array is electrochemically robust and exhibits three well-resolved, reversible oxidation waves. These electrochemical characteristics indicate that these types of molecules are well suited for storing multiple bits of information.     

The effect of surface properties on the strength of attachment of fungal spores using AFM perpendicular force measurements

Polymeric substrata may be biodegraded by fungal species resulting in damaged, weakened and unsightly materials. This process typically begins with fungal spore attachment to the surface. In order to better understand the processes that precedes a biofouling event, fungal spore attachment to a range of surfaces, was determined using perpendicular force measurements. This was carried out using atomic force microscope cantilevers modified with fungal spores from Aspergillus niger 1957 (5μm diameter, non-wettable, spherical), Aspergillus niger 1988 (5μm diameter non-wettable, spikey) or Aureobasidium pullulans (5μm-10μm sized, wettable, ellipsoidal). The strength of attachment of the spores was determined in combination with seven surfaces (nitric acid cleaned glass, cast poly(methylmethacrylate) sheet [c-PMMA], polytetrafluoroethylene [PTFE], silicon wafers spin coated with poly(3-methacryloxypropyltrimethoxy silane (γ-MPS)-co-methylmethacrylate (MMA)) [p(γ-MPS-co-MMA)], poly (γ-MPS-co-lauryl methacrylate) [p(γ-MPS-co-LMA)] [both in a ratio of 10-90], PMMA dissolved in a solvent [PMMAsc] and silicon wafers). Perpendicular force measurements could not be related to the R(a) values of the surfaces, but surface wettability was shown to have an effect. All three spore types interacted comparably with the surfaces. All spores attached strongly to c-PMMA and glass (wettable surfaces), and weakly to PTFE, (p(γ- MPS-co-LMA)) (non-wettable) and (p(γ-MPS-co-MMA)). Spore shape also affected the strength of attachment. Aureobasidium pullulans spores attached with the widest range of forces whilst A. niger 1957 attached with the smallest. Findings will inform the selection of surfaces for use in environments where biofouling is an important consideration.