金纳米棒核／二氧化硅壳纳米复合结构的可控制备及细胞成像

采用模板合成以及溶胶凝胶方法制备了金纳米棒核／二氧化硅壳（GNR@SiO2）纳米复合粒子,探讨了这种新型纳米复合结构的可控制备、光谱性质、细胞毒性和细胞成像。通过紫外可见分光光度计、透射电镜、共聚焦显微镜对样品进行表征,结果表明：通过对反应时间的调控,获得的纳米复合粒子的二氧化硅壳层厚度可以控制在20～30nm。由于二氧化硅壳层的存在,大大提高了金纳米棒的稳定性,同时降低了金纳米棒的细胞毒性;此外,由于二氧化硅壳层具有良好的化学修饰作用,因此可以将荧光探针分子标记在二氧化硅壳层表面,修饰后的纳米复合粒子可以通过细胞内吞作用进入细胞,从而实现细胞内的光学成像。因此,该纳米粒子复合材料在生物传感、细胞成像以及光热治疗等方面有着良好的应用前景。     

Synthetic antibacterial agent assisted synthesis of gold nanoparticles: Characterization and application studies

In this study, we report synthesis of water-soluble gold nanoparticles (Au-NPs), having an average diameter of ca. ∼20 nm, using ciprofloxacin (CF) as a reducing/stabilizing agent. The synthesized Au-NPs have been characterized by scanning electron microscopy (SEM), EDX, TEM, UV-visible spectroscopy (UV-vis), X-ray diffraction and cyclic voltammetry. TEM and SEM combined with EDX analysis confirmed that spherical-shaped Au-NPs were formed. UV-vis spectra of the Au-NPs showed two absorption bands corresponding to the capping agent ciprofloxacin and surface plasmon absorption bands at 274 and 527 nm, respectively. The synthesized Au-NPs are used to modify a glassy carbon electrode (GCE) and its electrochemical and electrocatalytic properties are investigated. The Au-NPs modified electrode showed excellent electrocatalytic activity towards the oxidation of methanol at +0.33 V in alkaline solution, which was not observed on the unmodified GCE. Further, electrocatalytic reduction of oxygen was also studied using the Au-NPs modified electrode at lower potential. Here, CF was used as a reducing agent for the preparation of Au-NPs dispersion. This Au-NPs dispersion is highly stable, and can be stored for more than three months in air at room temperature.     

Photochemical synthesis of polygonal gold nanoparticles

In this paper, we propose a method to generate gold nanoparticles capable of absorbing near infrared light (NIR) radiation through a photochemical reaction. This approach does not require the use of either surfactants or polymers, reducing the difficulties that may arise in further chemical modifications for the gold nanoparticles. The gold nanoparticles with either triangular or hexagonal shapes were generated using the photo-reduction method, mixing hydrogen tetrachloroaurate with sodium oxalate, a reducing agent, in aqueous solution under illumination of a mercury lamp (λ_max = 306 nm) for more than 10 min. The size of the gold nanoparticles varies from 25 to 200 nm, which mainly depends on the duration of light illumination and the concentration of sodium oxalate. Furthermore, we demonstrate that the presence of the gold nanoparticles in aqueous solutions can effectively elevate the temperature of the solutions under irradiation of NIR light (808 nm) within a few minutes. The gold nanoparticles can be potentially used as suitable photothermal agents for hyperthermia.     

Monofunctional gold nanoparticles: synthesis and applications

The ability to control the assembly of nanoparticle building blocks is critically important for the development of new materials and devices. The properties and functions of nanomaterials are not only dependent on the size and properties of individual particles, but also the interparticle distance and interactions. In order to control the structures of nanoassemblies, it is important to first achieve a precise control on the chemical functionality of nanoparticle building blocks. This review discusses three methods that have been reported recently for the preparation of monofunctional gold nanoparticles, i.e., nanoparticles with a single chemical functional group attached to each particle. The advantages and disadvantages of the three methods are discussed and compared. With a single functional group attached to the surface, one can treat such nanoparticles as molecular building blocks to react with other molecules or nanoparticles. In other words, by using appropriate chemical reactions, nanoparticles can be linked together into nanoassemblies and materials by covalent bonds, similar to the total chemical synthesis of complicated organic compounds from smaller molecular units. An example of using this approach for the synthesis of nanoparticle/polymer hybrid materials with optical limiting properties is presented. Other potential applications and advantages of covalent bond-based nanoarchitectures vs. non-covalent interaction-based supramolecular self-assemblies are also discussed briefly in this review.     

Pseudo-template synthesis of gold nanoparticles based on polyhydrosilanes

Highly stable colloidal gold nanoparticles are obtained in a pseudo-template system using a specific polyhydrosilane copolymeric structure. This process takes place in situ by microwaves activation of the polymer solution in a non-polar solvent followed by stirring with solid HAuCl₄ in natural light. The experimental procedure is very simple and the resulted colloidal gold solution is indefinitely stable. The specific surface plasmon resonance absorption band of the gold nanoparticles is strongly red shifted and is strictly related to their size. AFM correlated with DLS analysis showed flattened round shaped colloidal polymer-gold nanoparticles with large diameters. SEM-EDX combined analysis reveals that the polysilane-gold nanoparticles show a natural tendency to auto-assemble in close packed structures which form large areas over the polymer film surface.     

One-pot synthesis of gold nanoparticles using tetradentate porphyrins

In this study, the meso-tetra (p-hydroxyphenyl) porphyrin and meso-tetra (m-hydroxyphenyl) porphyrin were coated on to gold nanoparticles (AuNPs) via thioacetate anchors which easily dissociate to form S–Au bonds. 4-tert-butyl phenyl thioacetate-AuNPs were prepared and used as a monodentate passivant to control the size of the tetradentate porphyrin-AuNPs. The porphyrin-coated AuNPs were characterized by UV–Vis, TEM, XRD, and XPS analyses. The tetradentate porphyrin-AuNPs size is within a range of 5–15 nm in diameter with exotic shapes. The plausible network formation for AuNP@p-TPP-SAc and the capping structure of the AuNP@m-TPP-SAc have been suggested.     

Controlled synthesis of gold nanospheres and single crystals in hydrogel

Narrow-dispersed gold nanospheres, regular single-crystal nanoplates and nanobulks were prepared, respectively, by reducing HAuCl₄ within a hydrogel system under UV irradiation. The formation of gold products with different geometric shape and size was found to depend on both the microenvironment of the gel matrix and the initial concentration of HAuCl₄. The resultant gold particles were investigated by UV–vis spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy, and energy-dispersion X-ray spectroscopy. Electronic Supplementary Material The online version of this article at (doi: ) contains supplementary material, which is available to authorised users.     

Controlled synthesis of monodispersed superparamagnetic nickel ferrite nanoparticles

Nickel ferrite nanoparticles have been prepared through a gentle chemistry route, starting from iron nitrate, nickel nitrate and stearic acid. The nickel ferrite crystalline phase, the particle size and shape, and the homogeneity of the resulting nanoparticles were studied by X-ray diffraction and transmission electron microscopy. Fourier transform infrared techniques were used to study the composition characteristics of the as-prepared sample. Magnetization studies at room temperature showed superparamagnetic behavior for the nanoparticles. Magneto-optic rotation studies at different wavelengths of He-Ne lasers reveal non-linear behavior.     

Ultrasonic-assisted spark plasma discharge for gold nanoparticles synthesis

We examine the ultrasonic-assisted spark discharge in gold nanoparticles production. A 1 kHz pulsed power supply is used to generate spark discharge plasma. The appropriate range of peak power (pulse peak current) for nanoparticles production was determined by the Dynamic Light Scattering (DLS) method. Colloidal gold nanoparticles were synthesized in 100 mL deionized water and pure ethanol as liquid dielectrics. Scanning Electron Microscopy (SEM) micrographs show that the nanoparticles diameter in the deionized water is larger than in pure ethanol. Transmission Electron Microscopy (TEM) micrographs of the gold nanoparticles also confirm the SEM results with more accuracy. The present study revealed that the ultrasonic wave increases the shape uniformity of the nanoparticles and decreases their size.     

Controlled oxidation of iron nanoparticles in chemical vapour synthesis

Enteric-coated formulations can delay the release of drugs until they have passed through the stomach. However, high concentration of drugs caused by rapidly released in the small intestine leads to the intestinal damage, and frequent administration would increase the probability of missing medication and reduce the patient compliance. To solve the above-mentioned problems, aspirin-loaded enteric-coated sustained-release nanoparticles with core–shell structure were prepared via one-step method using coaxial electrospray in this study. Eudragit L100-55 as pH-sensitive polymer and Eudragit RS as sustained-release polymer were used for the outer coating and inner core of the nanoparticles, respectively. The maximum loading capacity of nanoparticles was 23.66 % by changing the flow rate ratio of outer/inner solutions, and the entrapment efficiency was nearly 100 %. Nanoparticles with core–shell structure were observed via fluorescence microscope and transmission electron microscope. And pH-sensitive and sustained drug release profiles were observed in the media with different pH values (1.2 and 6.8). In addition, mild cytotoxicity in vitro was detected, and the nanoparticles could be taken up by Caco-2 cells within 1.0 h in cellular uptake study. These results indicate that prepared enteric-coated sustained-release nanoparticles would be a more safety and effective carrier for oral drug delivery.     

Green synthesis of silver and gold nanoparticles using Rosa damascena and its primary application in electrochemistry

Biosynthesis and characterizations of nanoparticles have become an important branch of nanotechnology. In this paper, green synthesis of gold nanoparticles (AuNPs) and silver nanoparticles (AgNPs) using the flower extract of Rosa damascena as a reducing and stabilizing agent, has been discussed. This approach is simple, cost-effective and stable for a long time, reproducible at room temperature and in an eco-friendly manner to obtain a self-assembly of AuNPs and AgNPs. The resulting nanoparticles are characterized using UV–vis, TEM, XRD and FT-IR spectroscopic techniques. A modified glassy carbon electrode using AuNPs (AuNPs/GCE) was investigated by means of cyclic voltammetry in a solution of 0.1 M KCl and 5.0×10⁻³ M [Fe(CN)₆]^3−/4−. The results show that electronic transmission rate between the modified electrode and [Fe(CN)₆]^3−/4− increased.     

Fluorescence of polystyrene microspheres during photochemical synthesis of gold nanoparticles

The results of investigation of the fluorescence of carboxylated polystyrene microspheres in the process of photochemical synthesis of gold nanoparticles are presented. The introduction of an aqueous solution of hydrogen tetrachloroaurate (III) into an unirradiated polymer dispersion causes a decay of the excimer fluorescence in polystyrene at 335 nm. UV irradiation (λ_exc = 254 nm) of polystyrene dispersions in the presence of AuCl ₄ ^? ions leads to the formation of metal particles, which occurs after an induction period and affects the polystyrene fluorescence.     

Pulsed spark-discharge assisted synthesis of colloidal gold nanoparticles in ethanol

A green method, using pulsed spark-discharge (PSD) to synthesize gold nanoparticles (AuNPs) in ethanol, is studied in this article. Unlike conventional methods for metal nanoparticles synthesis, the PSD method does not require the addition of chemical surfactants and stabilizers. The size of PSD–AuNPs is examined by transmission electron microscopy, with a range 5–50 nm. The chemical compounds, crystal structure, and surface plasmon resonance of PSD–AuNPs are studied using energy dispersive X-ray spectroscopy, X-ray diffraction, and UV–Visible spectroscopy, respectively. Zeta potential analysis shows that a negative charge (−40 mV) on the surface of the PSD–AuNPs may be contributing to the stability of the suspension. During the gold electrodes discharge in the ethanol, under an intensive electric field and thermal energy, bulk metallic gold and ethanol may produce AuNPs and varieties of chemical derivatives, which are also studied by GC/MS and FTIR to investigate the suspension mechanism. The analysis results show that there is an oxidation reaction of ethanol occurring during the PSD process to produce ethanol derivatives, such as acetaldehyde, acetic acid, and ethyl acetate, which may modify the surface of AuNPs by coordination of oxygen atoms. However, only acetic acid can form a negative charge by the deprotonation of the carboxylic group of surface in ethanol, resulting in the creation of a repulsion force between the particles to form the stable colloid system. The experimental results indicate that PSD is an alternative green process to synthesize gold nanoparticles suspension in ethanol. Moreover, with a gold rod consumption rate of 15 mg/L, concentrations of gold nanoparticles ~9 ppm have been observed; therefore, the net production rate is around 60%.     

Controlled synthesis of colloidal silver nanoparticles in capillary micro-flow reactor

In this study, using a polytetrafluoroethylene (PTFE) capillary tube as a micro-flow reactor, well-dispersed colloidal silver nanoparticles were controllably synthesized with different flow rates of precursory solution. Scanning transmission electron microscopy images and UV–visible absorbance spectra showed that silver nanoparticles with large size can be prepared with slow flow rate in the PTFE capillary reactor. The effects of tube diameters on the growth of colloidal silver nanoparticles were investigated. Experiment results demonstrated that using tube with small diameter was more propitious for the controllable synthesis of silver nanoparticles with different sizes.

     

Room-temperature synthesis of gold nanoparticles and nanoplates using Shewanella algae cell extract

Biosynthesis of spherical gold nanoparticles and gold nanoplates was achieved at room temperature and pH 2.8 when cell extract from the metal-reducing bacterium Shewanella algae was used as both a reducing and shape-controlling agent. Cell extract, prepared by sonicating a suspension of S. algae cells, was capable of reducing 1 mol/m³ aqueous AuCl₄ ⁻ ions into elemental gold within 10 min when H₂ gas was provided as an electron donor. The time interval lapsed since the beginning of the bioreductive reaction was found to be an important factor in controlling the morphology of biogenic gold nanoparticles. After 1 h, there was a large population of well-dispersed, spherical gold nanoparticles with a mean size of 9.6 nm. Gold nanoplates with an edge length of 100 nm appeared after 6 h, and 60% of the total nanoparticle population was due to gold nanoplates with an edge length of 100–200 nm after 24 h. The yield of gold nanoplates prepared with S. algae extract was four times higher than that prepared with resting cells of S. algae. The resulting biogenic gold nanoparticle suspensions showed a large variation in color, ranging from pale pink to purple due to changes in nanoparticle morphology.     

Controlled synthesis and phase characterization of Fe-based nanoparticles obtained by thermal decomposition

Iron oxide nanoparticles were synthesized by the thermal decomposition of Fe(acac)₃ and Fe(CO)₅. Three different homogeneous procedures were used for the controlled synthesis of Fe₃O₄, γ-Fe₂O₃ and Fe₃O₄/γ-Fe₂O₃ mixture nanocrystals. A combination of characterization techniques was used in order to distinguish these oxides. The controllable size, the narrow distribution and the rhombic self-assembly of the nanoparticles were revealed by the high-resolution transmission electron microscopy images and the X-ray powder diffraction results. For the quantitative analysis of the samples manganometry was used. Preliminary magnetic measurements indicated the size and composition dependence of saturation magnetization, a superparamagnetic behavior of the samples and some ferromagnetic features.     

Effect of ultrasonic irradiation power on sonochemical synthesis of gold nanoparticles

In this work, optimized size distribution and optical properties in the colloidal synthesis of gold nanoparticles (GNPs) were obtained using a proposed ultrasonic irradiation assisted Turkevich-Frens method. The effect of three nominal ultrasound (20 kHz) irradiation powers: 60, 150, and 210 W have been analyzed as size and shape control parameters. The GNPs colloidal solutions were obtained from chloroauric acid (HAuCl₄) and trisodium citrate (C₆H₅Na₃O₇·2H₂O) under continuous irradiation for 1 h without any additional heat or stirring. The surface plasmon resonance (SPR) was monitored in the UV–Vis spectra every 10 min to found the optimal time for localized SPR wavelength (${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$), and the 210 sample procedure has reduced the ${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ localization at 20 min, while 150 and 60 samples have showed ${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ at 60 min. The nucleation and growth of GNPs showed changes in shape and size distribution associated with physical (cavitation, temperature) and chemical (radical generation, pH) conditions in the aqueous solution. The results showed quasi-spherical GNPs as pentakis dodecahedron (${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ = 560 nm), triakis icosahedron (${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ = 535 nm), and tetrakis hexahedron (${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ = 525 nm) in a size range from 12 to 16 nm. Chemical effects of ultrasound irradiation were suggested in the disproportionation process, electrons of AuCl₂⁻ are rapidly exchanged through the gold surface. After AuCl₄⁻ and Cl⁻ were desorbed, a tetrachloroaurate complex was recycled for the two-electron reduction by citrate, aurophilic interaction between complexes AuCl₂⁻, electrons exchange, and gold seeds, the deposition of new gold atoms on the surface promoting the growth of GNPs. These mechanisms are enhanced by the effects of ultrasound, such as cavitation and transmitted energy into the solution. These results show that the plasmonic response from the reported GNPs can be tuned using a simple methodology with minimum infrastructure requirements. Moreover, the production method could be easily scalable to meet industrial manufacturing needs.     

Optimization of components in high-yield synthesis of block copolymer-mediated gold nanoparticles

The optimization to achieve stable and high-yield gold nanoparticles in block copolymer-mediated synthesis has been examined. Gold nanoparticles are synthesized using block copolymer P85 in gold salt HAuCl₄·3H₂O solution. This method usually has a very limited yield which does not simply increase with the increase in the gold salt concentration. We show that the yield can be enhanced by increasing the block copolymer concentration but is limited to the factor by which the concentration is increased. On the other hand, the presence of an additional reductant (trisodium citrate) in 1:1 molar ratio with gold salt enhances the yield by manyfold. In this case (with additional reductant), the stable and high-yield nanoparticles having size about 14 nm can be synthesized at very low block copolymer concentrations. These nanoparticles thus can be efficiently used for their application such as for adsorption of proteins.     

Solvothermal synthesis of green-fluorescent carbon nanoparticles and their application

A novel solvothermal approach to synthesize green-fluorescent carbon nanoparticles (CNPs) was developed using l-ascorbic acid as the carbon source, glycol and triple distilled water as the solvent. The CNPs emit strong green fluorescence under UV irradiation, and the fluorescence intensity showed a good linear relationship with pH value within a certain range. Direct yeast cell labeling was achieved through cell endocytosis of these CNPs.     

Controlled synthesis of pompon-like self-assemblies of Pd nanoparticles under microwave irradiation

Pd nanoparticles with uniform, self-assembled pompon-like nanostructure were synthesized by thermal decomposition of palladium acetate under microwave irradiation with methyl isobutyl ketone (MIBK) as a solvent in the presence of a little amount of ethylene glycol (EG) and KOH without using any special stabilizers. The as-synthesized Pd nano-pompons were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy and X-ray powder diffraction. The results show that the as-prepared Pd nano-pompons with the average diameters in the range of 28–81 nm were self-assemblies organized by hundreds of smaller primary nanoparticles with an average dimension of about 2.4 nm. The sizes of Pd nano-pompons can be well controlled by adjusting the concentration of palladium acetate. A little amount of EG and KOH also plays an important role in controlling the size, uniformity and dispersion of Pd nano-pompons. The Pd nano-pompons can be easily supported on γ-Al₂O₃ and their catalytic activity was examined preliminarily.