Recognition of duplex RNA by helix-threading peptides

Many important biological processes, from the interferon antiviral response to the generation of microRNA regulators of translation, involve duplex RNA. Small molecules capable of binding duplex RNA structures with high affinity and selectivity will be useful in regulating these processes and, as such, are valuable research tools and potentially therapeutic. In this paper, the synthesis and duplex RNA-binding properties of EDTA.Fe-modified peptide-intercalator conjugates (PICs) are described. Peptide appendages at the 4- and 9-positions of the planar acridine ring system render these PICs threading intercalators, directing the substituents into both grooves of double helical RNA simultaneously. Directed hydroxyl radical cleavage experiments conducted with varying RNA stem-loop structures indicate a preferred binding polarity with the N- and C-termini of the PIC in the minor and major grooves, respectively. However, this binding polarity is shown to be dependent on both the structure of the PIC and the RNA secondary structure adjacent to the intercalation site. Definition of the minimal RNA structure required for binding to one of these PICs led to the identification of an intercalation site in a pre-microRNA from Caenorhabditis elegans. Results presented will guide both rational design and combinatorial approaches for the generation of new RNA binding PICs and will continue to facilitate the identification of naturally occurring RNA targets for these small molecules.     

Triphenylamine and quinoline-containing polyfluorene for blue light-emitting diodes

A novel blue light-emitting polyfluorene-based copolymer PTHD containing electron-rich triphenylamine and electron-poor phenylquinoline side chains in the C-9 position of fluorene unit is described. By comparison of the solution and thin film photoluminescence (PL) spectra of PTHD, a considerable red-shift of Δλ = 10-15 nm was observed in the thin film PL spectrum. The emission intensity of the shoulder peak appeared in dilute solution was also significantly enhanced in the thin film. In contrast to the reference polymer poly{[9,9-dihexylfluorene]-alt-[9,9-di(2,4-diphenylquinoline)fluorene]}, PTHD exhibits higher HOMO energy level, and higher maximum brightness with the PLED device configuration of ITO/PEDOT:PSS/polymer_70% + PBD_30%/TPBI/LiF/Al.     

Helical cyclic pentapeptides constrain HIV-1 Rev peptide for enhanced RNA binding

HIV-1 Rev is a 116 residue transporter protein that enters the host cell nucleus and uses its 17 amino acid segment (Rev_34–50) to bind and capture a specific piece of RNA, the Rev Response Element (RRE), for transport to the cytoplasm. This is critical for HIV replication. In isolation, Rev_34–50 shows negligible structure in water, but is alpha helical in a mixture of water and 2,2,2-trifluoroethanol (TFE) or when bound to RRE. Here we report that helix-constrained cyclic pentapeptides, either appended to the N-terminus or incorporated within Rev_34–50, are efficient helix nucleators in water. They induce up to 90% alpha helicity for isolated Rev peptides in water and confer high RNA-binding affinity.     

Use of intein-directed peptide biosynthesis to improve serum stability and bioactivity of a gelatinase inhibitory peptide

Screening of phage display libraries allows rapid identification of peptides binding to a target. However, functional analysis of the phage sequences and their reproduction as soluble and stable peptides are often the most time-consuming part in the screening. We have used here intein-based peptide biosynthesis to produce a phage-display derived gelatinase inhibitory peptide CTTHWGFTLC and to identify the critical residues for gelatinase inhibitory activity by performing alanine-scanning mutagenesis. By biosynthetic incorporation of 5-fluorotryptophan, we obtained an inhibitor of MMP-2 and MMP-9 gelatinases that showed a 6-fold enhancement in serum stability in comparison to the wild-type peptide. The new peptide also had an improved ability to inhibit tumor cell migration. These studies indicate the utility of intein methodology for synthesis and design of peptides obtained by phage display.     

Conotoxin engineering: dual pharmacophoric noradrenaline transport inhibitor/integrin binding peptide with improved stability

A dual-pharmacophoric peptide was engineered by grafting the integrin binding RGD motif between the C- and N-termini of a disulfide-rich noradrenaline transporter inhibiting χ-conotoxin resulting in a stable backbone cyclized peptide. The construct maintained two independent biological activities and showed increased plasma stability with no adverse effects observed following administration to rats, highlighting the potential value of pharmacophore grafting into constrained peptide scaffolds.     

RNA architecture dictates the conformations of a bound peptide.

BACKGROUND: The biological function of several viral and bacteriophage proteins, and their arginine-rich subdomains, involves RNA-mediated interactions. It has been shown recently that bound peptides adopt either beta-hairpin or alpha-helical conformations in viral and phage peptide-RNA complexes. We have compared the structures of the arginine-rich peptide domain of HIV-1 Rev bound to two RNA aptamers to determine whether RNA architecture can dictate the conformations of a bound peptide. RESULTS: The core-binding segment of the HIV-1 Rev peptide class II RNA aptamer complex spans the two-base bulge and hairpin loop of the bound RNA and the carboxy-terminal segment of the bound peptide. The bound peptide is anchored in place by backbone and sidechain intermolecular hydrogen bonding and van der Waals stacking interactions. One of the bulge bases participates in U*(A*U) base triple formation, whereas the other is looped out and flaps over the bound peptide in the complex. The seven-residue hairpin loop is closed by a sheared G*A mismatch pair with several pyrimidines looped out of the hairpin fold. CONCLUSIONS: Our structural studies establish that RNA architecture dictates whether the same HIV-1 Rev peptide folds into an extended or alpha-helical conformation on complex formation. Arginine-rich peptides can therefore adapt distinct secondary folds to complement the tertiary folds of their RNA targets. This contrasts with protein-RNA complexes in which elements of RNA secondary structure adapt to fit within the tertiary folds of their protein targets.     

NMR-based characterization of phenothiazines as a RNA binding scaffold

Phenothiazines were identified by virtual screening as promising ligands for HIV-1 TAR RNA and A-site ribosomal RNA, and binding in each case was verified experimentally. Consequently, since phenothiazines generally possess high bioavailability and low toxicity, we used several NMR techniques to explore the binding characteristics of acetopromazine with a total of five different RNA constructs: four as potential drug targets plus one control RNA construct. Acetopromazine was able to bind to various internal bulges and terminal loops containing both purines and pyrimidines, but no binding could be detected with double-stranded RNA or tetraloops. Dissociation constants determined via NMR varied from 0.27 to >3 mM. Analysis of differential saturation transfer difference (STD) NMR effects of acetopromazine suggests that the phenothiazine moiety has the closest contact to the binding sites of TAR and A-site RNA while the flexible N,N-dimethylpropylamino side chain contributes less to binding. NMR studies on A-site ribosomal RNA binding by six commercially available phenothiazines, while too few to establish a true structure-activity relationship, revealed a distinct dependence on aromatic ring and side chain substituents. Substituted phenothiazines have low molecular weight, are not highly charged, and have an inherent affinity for irregular tertiary RNA folds, suggesting that they can serve as a novel scaffold for constructing RNA-binding ligands.     

A cyclopentane conformational restraint for a peptide nucleic acid: design,asymmetric synthesis,and improved binding affinity to DNA and RNA

[structure: see text] A strategy to restrict the highly flexible backbone conformation of a peptide nucleic acid (PNA) by incorporation of a cyclopentane ring is proposed. An asymmetric synthesis of cyclopentane-modified PNA is reported, and its binding properties were determined. The cyclopentane ring leads to a significant improvement in the binding properties of the resulting PNA to DNA and RNA.     

Backbone-extended pyrrolidine peptide nucleic acids (bepPNA): design, synthesis and DNA/RNA binding studies

One-carbon extended conformationally constrained pyrrolidine PNA monomer (bepPNA) has been synthesized, incorporated into PNA sequences at predefined positions, and showed selective RNA binding properties.     

RNA binding to antioxidant flavonoids

Flavonoids are an interesting group of natural polyphenolic compounds that exhibit extensive bioactivities such as scavenging free radical, antitumor and antiproliferative effects. The anticancer and antiviral effects of these natural products are attributed to their potential biomedical applications. While flavonoids complexation with DNA is known, their bindings to RNA are not fully investigated. This study was designed to examine the interactions of three flavonoids; morin (Mor), apigenin (Api) and naringin (Nar) with yeast RNA in aqueous solution at physiological conditions, using constant RNA concentration (6.25 mM) and various pigment/RNA (phosphate) ratios of 1/120 to 1/1. FTIR, UV-visible spectroscopic methods were used to determine the ligand binding modes, the binding constant and the stability of RNA in flavonoid-RNA complexes in aqueous solution. Spectroscopic evidence showed major binding of flavonoids to RNA with overall binding constants of K(morin) = 9.150 x 10(3) M(-1), K(apigenin)=4.967 x 10(4) M(-1), and K(naringin)=1.144 x 10(4) M(-1). The affinity of flavonoid-RNA binding is in the order of apigenin>naringin>morin. No biopolymer secondary structural changes were observed upon flavonoid interaction and RNA remains in the A-family structure in these pigment complexes.     

Oxazole-based peptide macrocycles: a new class of G-quadruplex binding ligands

Herein we report on the synthesis and DNA binding properties of a new class of water soluble oxazole-based peptide macrocycles that bind selectively to quadruplex DNA, with no detectable binding to duplex DNA. We have recently identified one quadruplex in the proto-oncogene c-kit that is suspected to act as a regulatory element for the expression of the c-kit gene. Here we provide the first example of a ligand binding to and stabilizing the c-kit quadruplex. Moreover, we show that these macrocycles show a preference for the c-kit quadruplex as compared to the human telomeric quadruplex.     

MCSS-based predictions of RNA binding sites

The diversity of RNA tertiary structures provides the basis for specific recognition by proteins or small molecules. To investigate the structural basis and the energetics which control RNA-ligand interactions, favorable RNA binding sites are identified using the MCSS method, which has been employed previously only for protein receptors. Two different RNAs for which the structures have been determined by NMR spectroscopy were examined: two structures of the TAR RNA which contains an arginine binding site, and the structure of the 16S rRNA which contains an aminoglycoside binding site (paromomycin). In accord with the MCSS methodology, the functional groups representing the entire ligand or only part of it (one residue in the case of the aminoglycosides) are first replicated and distributed with random positions and orientations around the target and then energy minimized in the force field of the target RNA. The Coulombic term and the dielectric constant of the force field are adjusted to approximate the effects of solvent-screening and counterions. Optimal force field parameters are determined to reproduce the binding mode of arginine to the TAR RNA. The more favorable binding sites for each residue of the aminoglycoside ligands are then calculated and compared with the binding sites observed experimentally. The predictability of the method is evaluated and refinements are proposed to improve its accuracy. Received: 24 April 1998 / Accepted: 4 August 1998 / Published online: 7 December 1998     

Cyclohexanyl peptide nucleic acids (chPNAs) for preferential RNA binding: effective tuning of dihedral angle beta in PNAs for DNA/RNA discrimination

[structures: see text] A serious drawback of peptide nucleic acids (PNAs) from an application perspective that has not been adequately dealt with is nondiscrimination of identical DNA and RNA sequences. An analysis of the available X-ray and NMR solution structures of PNA complexes with DNA and RNA suggested that it might be possible to rationally impart DNA/RNA duplex binding selectivity by tuning the dihedral angle beta of the flexible ethylenediamine part of the PNA backbone (II) via suitable chemical modifications. Cyclohexanyl PNAs (chPNAs) with beta approximately = 65 degrees were designed on the basis of this rationale. The chPNAs introduced remarkable differences in duplex stabilities among their DNA and RNA complexes, with melting temperatures (deltaTm(RNA-DNA) = +16-50 degrees C) depending on the number of modifications and the stereochemistry. This is a highly significant, exceptional binding selectivity of a mix sequence of PNA to RNA over the same DNA sequence as that seen to date. In contrast, cyclopentanyl PNAs (cpPNAs) with beta approximately = 25 degrees hybridize to DNA/RNA strongly without discrimination because of the ring puckering of the cyclopentane ring. The high affinity of chPNAs to bind to RNA without losing base specificity will have immediate implications in designing improved PNAs for therapeutic and diagnostic applications.     

Formation and stability of peptide enolates in aqueous solution

Second-order rate constants k(DO) (M(-1) s(-1)) were determined in D(2)O for deprotonation of the N-terminal alpha-amino carbon of glycylglycine and glycylglycylglycine zwitterions, the internal alpha-amino carbon of the glycylglycylglycine anion, and the acetyl methyl group and the alpha-amino carbon of the N-acetylglycine anion and N-acetylglycinamide by deuterioxide ion. The data were used to estimate values of k(HO) (M(-1) s(-1)) for proton transfer from these carbon acids to hydroxide ion in H(2)O. Values of the pK(a) for these carbon acids ranging from 23.9 to 30.8 were obtained by interpolation or extrapolation of good linear correlations between log k(HO) and carbon acid pK(a) established in earlier work for deprotonation of related neutral and cationic alpha-carbonyl carbon acids. The alpha-amino carbon at a N-protonated N-terminus of a peptide or protein is estimated to undergo deprotonation about 130-fold faster than the alpha-amino carbon at the corresponding internal amino acid residue. The value of k(HO) for deprotonation of the N-terminal alpha-amino carbon of the glycylglycylglycine zwitterion (pK(a) = 25.1) is similar to that for deprotonation of the more acidic ketone acetone (pK(a) = 19.3), as a result of a lower Marcus intrinsic barrier to deprotonation of cationic alpha-carbonyl carbon acids. The cationic NH(3)(+) group is generally more strongly electron-withdrawing than the neutral NHAc group, but the alpha-NH(3)(+) and the alpha-NHAc substituents result in very similar decreases in the pK(a) of several alpha-carbonyl carbon acids.     

Anion effect on the nanostructure of a metal ion binding self-assembling peptide

Effects of copper salts containing different anions (SO(4)(2)(-), Cl(-), and NO(3)(-)) on the self-assembly of a designed peptide EAK16(II)GGH with affinity for Cu(2+) have been investigated. The peptide secondary structure, self-assembled nanostructures, and surface activity were observed to depend strongly on the type of anion. Over a salt concentration range from 0.05 to 10.0 mM, SO(4)(2)(-) induced long fiber formation, whereas Cl(-) and NO(3)(-) caused short fiber formation. The fiber length increased with copper sulfate concentration, but the concentration of copper chloride and copper nitrate did not affect the peptide nanostructures significantly. Analysis by Fourier transform infrared spectroscopy (FTIR) revealed that the addition of the copper salts tended to cause the peptide conformation to change from alpha-helix/random coil to beta-sheet, the extent to which depended on the anion type. This evidence of the anion effect was also supported by surface tension measurements using the axisymmetric drop shape analysis-profile (ADSA-P) technique. An explanation for the effect of anions on the peptide self-assembly was proposed. The divalent anion SO(4)(2)(-) might serve as a bridge by electrostatically interacting with two lysine residues from different peptide molecules, promoting beta-sheet formation. The extensive beta-sheet formation may further promote peptide self-assembly into long fibers. On the other hand, monovalent anions Cl(-) and NO(3)(-) may only electrostatically interact with one charged residue of the peptide; hence, a mixed secondary structure of alpha-helix/random coil and beta-sheet was observed. This observation might explain the predominant formation of short fibers in copper chloride and copper nitrate solutions.