Preparation of MCM-41 in Industrial Scale and Its Application in Heavy Oil Processing

ＩｎｔｒｏｄｕｃｔｉｏｎＺｅｏｌｉｔｅｓａｒｅｖｅｒｙｉｍｐｏｒｔａｎｔｃａｔａｌｙｔｉｃｍａｔｅｒｉａｌｓａｎｄｗｉｄｅｌｙｕｓｅｄｉｎｃｈｅｍｉｃａｌｉｎｄｕｓｔｒｉｅｓｆｏｒｔｈｅｉｒｃｒｙｓ ｔａｌｌｉｎｅａｌｕｍｉｎｏｓｉｌｉｃａｔｅｎｅｔｗｏｒｋ .Ｈｏｗｅｖｅｒ ,ｔｈｅｉｒａｐｐｌｉ ｃａｔｉｏｎｉｓｓｔｉｌｌｌｉｍｉｔｅｄｂｙｔｈｅｒｅｌａｔｉｖｅｌｙｓｍａｌｌｐｏｒｅｏｐｅｎ ｉｎｇｓ ,ｐａｒｔｉｃｕｌａｒｌｙｂｙｔｈｅｄｅｐｌｅｔｉｏｎｏｆｔｈｅｌｉｇｈｔｒｅｓｅｒｖｅｓｏｆｔｈ…     

Mechanism of olefin epoxidation in the presence of a titanium-containing zeolite

The effect of the nature of a solvent on the liquid-phase epoxidation of olefins with an aqueous solution of hydrogen peroxide over a titanium-containing zeolite is studied. Butanol-1, butanol-2, propanol-1, isopropanol, methanol, ethanol, water, acetone, methyl ethyl ketone, isobutanol, and tert-butanol are examined as solvents. A mechanism of olefin epoxidation with hydrogen peroxide in an alcohol medium over a titanium-containing zeolite is proposed. Epoxidation reactions involving hydrogen peroxide and different olefins are studied experimentally.     

聚氨酯/分子筛复合材料的制备及性能

以聚对苯二甲酸乙二醇酯（PEA）、甲苯二异氰酸酯（TDI-80）、扩链剂（MOCA）、分子筛为原料,采用预聚体法制备了聚氨酯／分子筛复合材料．考察了分子筛的种类及加入量对聚氨酯／分子筛复合材料的耐溶剂性能、力学性能及热分解温度的影响．结果表明：在相同加入量的前提下,采用4A和13X分子筛制备的复合材料,前者的耐溶剂性能及力学性能要优于后者,当加入量为5％时,性能达到最佳．两者的加入均能提高复合材料的热分解温度,但影响相差不大．     

Synthesis and Characterization of Imidacloprid/Hydrotalcite-like Compound Nanohybrids

Hydrotalcite‐like compounds (HTlc) were first modified by sodium dodecyl sulfate (SDS), then the intercalation of imidacloprid (IM) into modified HTlc was carried out in mixed solvent of toluene/ethanol by an evaporating solvent enhanced intercalation method, obtaining IM‐SDS‐HTlc nanohybrids. It was found that the nanohybrids could well control the release of imidacloprid, demonstrating that the nanohybrids are a potential pesticide controlled‐release formulation. The release of imidacloprid from IM‐SDS‐HTlc nanohybrids is dependent on the pH and the presence of electrolyte in release medium. Acidic medium and the presence of electrolytes induce the higher release rate of imidacloprid. The release process of imidacloprid from IM‐SDS‐HTlc nanohybrids can be described by pseudo‐second‐order release kinetics.     

Potentiometric determination of the dissociation constants of L-histidine, proline and tryptophane in various hydroorganic media

The dissociation constant values of L-histidine, proline and tryptophane were determined at 25 +/- 0.1 degrees C by potentiometric pH titration in pure water and different hydroorganic solvent media. The organic solvents used were methanol, ethanol, N,N-dimethylformamide, dimethyl sulfoxide, acetone and dioxane. Initial estimates of the dissociation constant values of the different amino acids studied have been refined with ESAP2M computer program. It was observed that changing the medium permittivity as the solvent is enriched in methanol or ethanol has little influence on the pK*(a) values of the amino acids studied. The results obtained are discussed in terms of average macroscopic properties of the mixed solvents and the possible variation in microheterogeneity of the salvation shells around the solute.     

PEC films prepared from Chitosan-Alginate coacervates

Chitosan-alginate polyelectrolyte complex (PEC) have been prepared in situ in beads and microspheres. This study examines the preparation of suitable chitosan-alginate coacervates for casting into homogeneous PEC films for potential applications in packaging, controlled release systems and wound dressings. Coacervation between chitosan and alginate was rapid, but the rate may be controlled with the addition of water miscible organic solvents. Compared with ethanol and PEG200, acetone was the more promising solvent moderator. Suspensions of fine, uniformly dispersed coacervates were produced by a dropwise addition of 0.25% w/v chitosan solution (solvent: 1: 1 v/v of 2% acetic acid and acetone) into 0.25% w/v sodium alginate solution in water under rapid agitation. The PEC films were transparent and flexible. They exhibited high permeability to water vapor, but resisted complete dissolution in 0.1 M HCI, distilled water and pH 7.4 phosphate buffer solution. Microscopic heterogeneity in the films could be reduced by immersion in aqueous media, but this was accompanied by modifications in the thickness, permeability and mechanical property of the films.     

Loading and release behaviors of compressed polyelectrolyte multilayers for small dye molecules

Loading and release behaviors of compressed polyelectrolyte multilayers composed of poly(styrenesulfonate sodium salt) and poly(diallyldimethylammonium chloride) were investigated using fluorescein and rhodamine 6G as indicators by confocal laser scanning microcopy, fluorescence spectroscopy, and UV-vis spectroscopy. Compression of the multilayers resulted in a more densely packed microstructure, leading to the decrease of fluorescence intensity of the incorporated probes to 80% of its initial value, and much slower releasing rate as well as smaller releasing amount regardless of the types of the probes and the presence of salt. Utilizing the difference of loading and release rates between the compressed and the uncompressed regions, arrays of dye reservoirs have been fabricated on a chemical homogeneous but physical heterogeneous multilayer film.     

Utilization of fluorescein sodium salt for the indirect fluorimetric detection in micellar electrokinetic chromatography

The potential of fluorescein sodium salt to generate a background signal in indirect fluorimetric detection in micellar electrokinetic chromatography (MEKC) has been studied by using a sample test containing various alcohols (methanol, ethanol, propan-1-ol, propan-2-ol, 2-methylpropan-1-ol, pentan-3-ol, 2-methylbutan-1-ol, 3-methylbutan-1-ol), acetaldehyde, acetone and ethyl acetate. In order to optimize sample test resolution and detection sensitivity, we have studied different parameters: sodium dodecyl sulfate concentration, electrolyte ionic strength, applied voltage as well as that of the addition of an organic cosolvent within the running electrolyte. Although the micellar pseudo-phase was not able to be saturated with the fluorophore in order to obtain the maximal detection sensitivity, the detection thresholds were satisfactory. By way of example, the detection threshold reached for 3-methylbutan-1-ol is 0.03% (v/v). The quantitative aspect was approached with ethanol titration in a commercial white wine. Finally the repeatability relating to, on the one hand, the effective electrophoretic mobilities and, on the other hand, the corrected areas has also been studied.     

正负离子表面活性剂混合体系中高稳定性囊泡的形成

对总浓度为0.01 mol/L，摩尔比为2：1的十二烷基硫酸钠/溴化十二烷基三乙 铵的正负离子表面活性剂混合体系形成的囊泡的稳定性进行了研究。发现这一体系 形成的囊泡在长放置（5个月）后依然存在。在加入较大量的无机盐（0.15 mol/L NaBr）、较大幅度pH变化（pH = 2～12）、温度变化（从80 ℃到-22 ℃）情况下 体系中的囊泡依然呈现出优异的稳定性。在非水溶剂乙醇（100%）中这类正负离子 表面活性剂仍然可以形成囊泡。     

Characterization of factors affecting the release of low-solubility drug from prolonged release tablets

Diclofenac sodium (2-[(2,6-dichlorophenyl)amino]benzeneacetic acid monosodium salt) was investigated as a low-solubility drug and Naklofen^® retard prolonged release tablets, containing 100 mg of diclofenac sodium as a prolonged release lipophilic matrix system using factorial design approach. First, the solubility characteristics of diclofenac sodium in aqueous media with various ionic strengths, ionic compositions and pH in the range of 1-8 were determined. The obtained results showed that the solubility of diclofenac sodium depends mainly on pH of the aqueous medium and less on the composition and ionic strength of the medium. Next, the estimation of the effects of six different factors (type of the dissolution apparatus, rotation speeds of the stirring elements, pH, ionic strengths of dissolution medium, the applied salt, and the producer of the on-line connected dissolution apparatus and UV spectrophotometer) on the release of diclofenac sodium, using the two-level six-factorial design was investigated. It was found that rotation speeds of the stirring elements, pH, and ionic strengths of the dissolution medium have a significant impact on the drug release and should be further followed in future drug release analyses. The advantages of the factorial design approach are obvious in this work. It is a very economic way of obtaining the maximum amount of information in a short period of time, especially in the case of prolonged release formulations where each experiment requires at least 24 h.     

Core–Shell Hollow Microspheres of Magnetic Iron Oxide@Amorphous Calcium Phosphate: Synthesis Using Adenosine 5′‐Triphosphate and Application in pH‐Responsive Drug Delivery

Drug nanocarriers with magnetic targeting and pH‐responsive drug‐release behavior are promising for applications in controlled drug delivery. Magnetic iron oxides show excellent magnetism, but their application in drug delivery is limited by low drug‐loading capacity and poor control over drug release. Herein, core–shell hollow microspheres of magnetic iron oxide@amorphous calcium phosphate (MIO@ACP) were prepared and investigated as magnetic, pH‐responsive drug nanocarriers. Hollow microspheres of magnetic iron oxide (HMIOs) were prepared by etching solid MIO microspheres in hydrochloric acid/ethanol solution. After loading a drug into the HMIOs, the drug‐loaded HMIOs were coated with a protective layer of ACP by using adenosine 5′‐triphosphate (ATP) disodium salt (Na₂ATP) as stabilizer, and drug‐loaded core–shell hollow microspheres of MIO@ACP (HMIOs/drug/ACP) were obtained. The as‐prepared HMIOs/drug/ACP drug‐delivery system exhibits superparamagnetism and pH‐responsive drug‐release behavior. In a medium with pH 7.4, drug release was slow, but it was significantly accelerated at pH 4.5 due to dissolution of the ACP shell. Docetaxel‐loaded core–shell hollow microspheres of MIO@ACP exhibited high anticancer activity.     

荧光素钠乙醇溶液的光谱研究

1 前言荧光素钠作为黄绿光区的一种激光染料,由于它具有高的激光能量转换效率而引起人们的关注.这种染料的发光波长及发光效率都与其溶液的pH值直接有关。我们在前文中详细地研究了这种染料溶液的激光能量转换效率与其pH值的依赖关系,论述了染料分子在不同pH值的溶液中存在着多种不同的变型,并且讨论了其发光效率与pH值存在依赖关系的原因。本文进一步研究该染料在不同pH值的溶液中的吸收光谱、荧光光谱和荧光寿命以探     

MCM-41负载钨磷杂多酸催化剂的性能研究

制备并表征MCM-41负载H~3PW~1~2O~4~0(PW)催化剂.PW杂多酸在MCM-41上负载量高达70%(质量分数)时,XRD中仍未检测到其晶相峰.PW杂多酸与MCM-41载体的相互作用要比与SiO~2载体的强.PW杂多酸中的质子位是非常强的酸中心,它们对NH~3的微分吸附热在160-180kJ/mol的范围.与PW杂多酸相比,PW/MCM-41催化剂的酸中心强度变弱并且分布不均匀,其酸量和酸中心分布可以通过改变PW杂多酸的负载量来调节.PW/MCM-41是一类适合于中强酸和弱酸催化反应的新型固体酸催化剂。     

Effect of Zeolite NaY and Ca-Montmorillonite on Ethanol Production Using Synthetic Molasses

The influence of Ca-Montmorillonite (Ca-MNT) and zeolite NaY addition on ethanol production from synthetic molasses by S. cerevisiae 251 TP(3-2) was studied by the measurement of biomass concentrations and metal ion concentration with respect to fermentation time. Addition of 5 g/L Ca-MNT and 10 g/L zeolite NaY resulted in an increase in both ethanol concentration and ethanol production rate. This increase was 24 and 40% for ethanol concentration and 65 and 87% for production rate, respectively. From the ion analyses, it was observed that the NaY added to the medium decreased the toxic concentration of zinc, manganese, and iron cations and acted also as a pH regulator. Ca-MNT added to the medium decreased the concentration of Na⁺ ions, which is known to have a toxic effect on glycolysis and cell concentration. These effects caused improvement in the ethanol production rate.     

Direct Fermentation of Gelatinized Cassava Starch to Acetone,Butanol, and Ethanol Using Clostridium acetobutylicum Mutant Obtained by Atmospheric and Room Temperature Plasma

The mutant strain designated as ART18, obtained from the wild-type strain Clostridium acetobutylicum PW12 treated by atmospheric and room temperature plasma, showed higher solvent tolerance and butanol production than that of the wild-type strain. The production of butanol was 11.3?±?0.5 g/L, 31 % higher than that of the wild-type strain when it was used for acetone, butanol, and ethanol fermentation in P2 medium. Furthermore, the effects of cassava flour concentration, pH regulators, and vitamins on the ABE production were also investigated. The highest butanol production of 15.8?±?0.8 g/L and butanol yield (0.31 g/g) were achieved after the above factors were optimized. When acetone, butanol, and ethanol fermentation by ART18 was carried out in a 15-L bioreactor, the butanol production, the productivity of butanol, and the total solvent were 16.3?±?0.9, 0.19, and 0.28 g/L^/h, respectively. These results indicate that ART18 is a promising industrial producer in ABE fermentation.     

Introduction of Ag/CuO/MCM‐48 as an efficient catalyst for the one‐pot synthesis of novel pyran‐pyrrole hybrids

Bimetallic silver and copper incorporated mesoporous MCM‐48 (Ag/CuO/MCM‐48) was synthesized by simple wet‐impregnation method. The knowledge about its structural properties was gathered by means of Fourier transform‐infrared, energy‐dispersive X‐ray, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller analyses. The catalytic activity of Ag/CuO/MCM‐48 was examined in the one‐pot three‐component reaction of 3‐(1‐methyl‐1H‐pyrrol‐2‐yl)‐3‐oxopropanenitrile, malononitrile and various aromatic aldehydes leading to novel pyran‐pyrrole hybrid derivatives in reduced reaction times (5–10 min) and excellent yields (88–97%). Application of Ag/CuO/MCM‐48 as a potent heterogeneous catalyst with good reusability up to five times, use of ethanol as an eco‐compatible medium and chromatography‐free work‐up are some crucial green aspects of this procedure.     

PERVAPORATION OF ETHANOL/WATER MIXTURES WITH HIGH FLUX BY ZEOLITE-FILLED PDMS/PVDF COMPOSITE MEMBRANES

Thin-film zeolite-filled silicone/PVDF composite membranes were fabricated by incorporating zeolite particles into PDMS(poly(dimethylsiloxane)) membranes.The morphology of zeolite particles and zeolite filled silicone composite membranes were characterized by SEM.The zeolite-filled PDMS/PVDF composite membranes were applied for the pervaporation of ethanol/water mixtures and showed higher flux compared with that reported in literatures.The effect of zeolite loading and Si/Al ratio of zeolite particles on...     

含硼MFI型分子筛膜制备与渗透汽化性能研究

采用二次生长法在廉价的多孔莫来石管状支撑体上合成了含硼MFI(B-MFI)分子筛膜。通过XRD、FTIR、ICP-AES、11BMAS NMR和SEM对形成膜和粉末进行表征,并考察了溶胶nB/nSiO2比、料液温度和浓度对分子筛膜渗透汽化性能的影响。表征结果证实BO4存在于MFI晶体骨架中。溶胶nB/nSiO2比对膜层微结构和渗透汽化性能有较大影响。B-MFI型分子筛膜选择性地从水溶液中透过有机物,在60℃、质量分数5%丙酮/水和乙醇/水体系的分离因子分别为260和70,均高于同等条件下制备的silicalite-1分子筛膜。     

Effect of the medium on the ionization constants of some triazole compounds

The deprotonation and acid ionization constants of some triazole derivatives in various aqueous-organic solvent mixtures were determined potentiometrically at 20 degrees C. The organic solvents used were methanol, ethanol, DMF, DMSO, acetonitrile, acetone and dioxane. The high stabilization of both the non-protonated form by dispersion forces and of the proton by its interaction with the organic solvent are the main factors influencing the deprotonation constant in aqueous mixtures of methanol, ethanol, DMF or DMSO. On the other hand, the hydrogen bonding interactions and the solvent basicity, in addition to the electrostatic effect, contribute to the major effects in the deprotonation process (in solutions enriched with acetonitrile, acetone or dioxane) and the acid ionization process in different aqueous-organic solvent mixtures. Some thermodynamic parameters (delta H, delta G, delta S) of the ionization processes in a pure aqueous medium are also determined and discussed.     

Adsorption of water and ethanol in MFI-type zeolites

Water and ethanol vapor adsorption phenomena are investigated systematically on a series of MFI-type zeolites: silicalite-1 samples synthesized via both alkaline (OH(-)) and fluoride (F(-)) routes, and ZSM-5 samples with different Si/Al ratios as well as different charge-balancing cations. Full isotherms (0.05-0.95 activity) over the range 25-55 °C are presented, and the lowest total water uptake ever reported in the literature is shown for silicalite-1 made via a fluoride-mediated route wherein internal silanol defects are significantly reduced. At a water activity level of 0.95 (35 °C), the total water uptake by silicalite-1 (F(-)) was found to be 0.263 mmol/g, which was only 12.6%, 9.8%, and 3.3% of the capacity for silicalite-1 (OH(-)), H-ZSM-5 (Si/Al:140), and H-ZSM-5 (Si/Al:15), respectively, under the same conditions. While water adsorption shows distinct isotherms for different MFI-type zeolites due to the difference in the concentration, distribution, and types of hydrophilic sites, the ethanol adsorption isotherms present relatively comparable results because of the overall organophilic nature of the zeolite framework. Due to the dramatic differences in the sorption behavior with the different sorbate-sorbent pairs, different models are applied to correlate and analyze the sorption isotherms. An adsorption potential theory was used to fit the water adsorption isotherms on all MFI-type zeolite adsorbents studied. The Langmuir model and Sircar's model are applied to describe ethanol adsorption on silicalite-1 and ZSM-5 samples, respectively. An ideal ethanol/water adsorption selectivity (α) was estimated for the fluoride-mediated silicalite-1. At 35 °C, α was estimated to be 36 for a 5 mol % ethanol solution in water increasing to 53 at an ethanol concentration of 1 mol %. The adsorption data demonstrate that silicalite-1 made via the fluoride-mediated route is a promising candidate for ethanol extraction from dilute ethanol-water solutions.