Performance of compact pulse radiolysis system using a photocathode RF gun

A compact pulse radiolysis system using a photocathode RF gun was installed at Sumitomo Heavy Industries. Some performance tests were conducted concerning the electron beam and the laser pulse. The energy and the per-pulse charge of the electron beam were measured to be 1.75 MeV max. and 1 nC. The fluctuation of the charge was restricted within 2%. The pulse widths of the electron pulse and the analyzing laser pulse were 20 ps and 15 ps, respectively. The timing jitter between electron pulse and the laser pulse was ±5.7 ps. Based on these measurements, the all-over time resolution can deduced to be about 25 ps.     

Detection of low caloric power of coal by pulse fast-thermal neutron analysis

This paper introduces the analysis method and principle of pulse fast-thermal neutron analysis (PFTNA). A system for the measurement of low caloric power of coal by PFTNA is also presented. The 14 MeV pulse neutron generator and BGO detector and 4096 MCA were applied in this system. A multiple linear regression method applied to the data solved the interferential problem of multiple elements. The error of low caloric power between chemical analysis and experiment was less than 0.4 MJ/kg. This revised version was published online in July 2006 with corrections to the Cover Date.     

Measurement of coherent terahertz radiation for time-domain spectroscopy and imaging

A high-power terahertz (THz) source for THz time-domain spectroscopy (THz-TDS) and THz imaging has been developed based on an S-band compact electron linac at the National Institute of Advanced Industrial Science and Technology (AIST). A THz pulse was generated as coherent synchrotron radiation (CSR) from an ultra-short electron bunch and expected to have peak power of kW-order with frequency range of 0.1–2 THz. The electro-optic (EO) sampling method with a ZnTe crystal for the THz pulse measurement has been prepared for THz-TDS system. The timing measurement between the THz pulse and a probe laser was carried out. A preliminary experiment of THz transmission imaging of an integrated circuit (IC) card has been successfully demonstrated using the THz CSR pulse and a W-band rf detector. The imaging result was experimentally compared with a result of X-ray imaging. It is confirmed that its intensity and stability are enough to perform for the THz applications.     

Pulsed voltammetric stripping at the thin-film mercury electrode

A computer-controlled data acquisition system was used to generate comparative data for thin-film anodic stripping voltammetry with staircase, differential pulse and squarewave waveforms. Each waveform was tested for its sensitivity and speed of analysis. The square-wave form is the most sensitive, whether square wave or differential pulse measurements are used. This waveform offers the advantages of fast analysis time and discrimination against charging currents.     

Synthesis and morphological investigation of pulsed current formed nano-structured lead dioxide

An electro-forming method was used for the preparation of nano-structured lead dioxide on lead substrate in 4.8 M H₂SO₄. A two electrode system composed of two similarly prepared lead electrodes was employed. A constant current was applied between two electrodes for a short time, followed by a relaxation period. A dark oxidation film of suitable stability and homogeneity was formed on the anode electrode. Different parameters including pulse height, pulse time (t_on) and relaxation time (t_off) were optimized. A change in morphology of lead dioxide from globular to nanofibriliar was observed when the pulse time and relaxation time varied from 0.01 to 10 and 0.1 to 5 s, respectively, at a pulse height of 25 mA cm⁻². A variation in pulse height caused a variation in diameter and length of nanofibers formed at a pulsed time of 0.1 s and relaxation time of 5 s. The scanning electron microscopy (SEM) showed that lead dioxide particles obtained under these conditions have nanofibriliar morphology with an average diameter in the range between 20 and 50 nm and length of 500–1000 nm.     

Quick charging pulse polarography: Theory for a reversible system

The theory for quick charging pulse polarography (QCPP) is described. It has been developed to calculate, a priori, the best pulse shape in order to enhance the sensitivity, the signal to background ratio, and the scan rate of pulse polarography techniques. A general potential-time relation, independent of the pulse shape, is first deduced using the variational approach in the case of a reversible system involving two soluble species. The optimization procedure is then performed in order to cancel the undesirable charging current a short time after the pulse start. The resulting pulse shape exhibits some similitude with that of the double pulse technique but is expected to be more efficient.     

Electrical breakdown of human erythrocytes: a technique for the study of electro-haemolysis

This paper describes a technique suitable for investigating the electromechanical breakdown properties of erythrocyte cells. The cells were exposed to square wave electric pulses of precise duration and voltage. The erythrocytes were suspended in normal isotonic saline between two opposing platinum electrodes. A red LED light source and photodiode detector system were positioned orthogonally to the electrodes to record changes in the light transmission that occur immediately after applying an electric pulse. The light transmitted through the electrically treated erythrocyte suspension could be monitored continuously. Experiments were conducted to explore the inter-relationship between the critical voltage and pulse length for haemolysis. Human blood taken from "healthy" donors underwent haemolysis at a critical field strength of 304 kV/m for a 5 micros pulse and 292 kV/m for a 50 micros pulse. The relationship of critical pulse length and critical voltage for the blood samples was found to be inversely linear.     

Differential pulse polarography and voltammetry with a microprocessor-controlled polarograph and a pressurized mercury electrode

The performance of a microprocessor-controlled polarograph with a pressurized mercury electrode system has been evaluated. For the technique of differential pulse polarography, the theory applying to the pressurized mercury electrode in the dropping mercury format is shown to be the same as for a conventional gravity-controlled mercury electrode system. At the short drop times used (0.2–0.4 s), faradaic distortion terms are shown to influence the shape of the observed differential pulse polarograms. A substantial decrease in sensitivity is also incurred in using these short drop times, compared with the longer ones generally employed in differential pulse polarography. Results for differential pulse anodic stripping conform to the usual expectations.     

Pulse radiolysis based on a femtosecond electron beam and a femtosecond laser light with double-pulse injection technique

A new pulse radiolysis system based on a femtosecond electron beam and a femtosecond laser light with oblique double-pulse injection was developed for studying ultrafast chemical kinetics and primary processes of radiation chemistry. The time resolution of 5.2 ps was obtained by measuring transient absorption kinetics of hydrated electrons in water. The optical density of hydrated electrons was measured as a function of the electron charge. The data indicate that the double-laser-pulse injection technique was a powerful tool for observing the transient absorptions with a good signal to noise ratio in pulse radiolysis.     

Red and blue pulse timing control for pulse width modulation light dimming of light emitting diodes for plant cultivation

A pulse width modulation (PWM) light dimming system containing red and blue light emitting diodes was designed and constructed. Cultivation of the plant Arabidopsis thaliana under various light dimming wave patterns was compared. Control of the pulse timing (phase of wave pattern) between red and blue light in PWM light dimming was examined. Different plant growth was obtained by changing the phase of red and blue pulses. Pulse timing control of PWM light dimming for plant cultivation has the potential to act as a method for probing photosynthesis.     

Processing ultracentrifuge data with an "on-line" digital computer

A system is described for coupling the photoelectric scanner of an analytical ultracentrifuge to a high-speed digital computer. Following from a definition of the problem, use is made of the theory of radar pulse reception to show how the uncertainty in the measured pulse amplitudes can be improved. A two-way information exchange between the ultracentrifuge and the processor is involved.     

用超短脉冲激光研究1,3-二氯苯激发态动力学

利用啁啾脉冲放大技术建立了一套掺钛蓝宝石飞秒激光放大系统,该系统输出中心波长808nm,单脉冲能量8mJ,脉冲宽度60fs,脉冲重复频率20Hz.利用飞秒激光泵浦-探测及分子束技术,结合飞行时间质谱,对1,3-二氯苯分子的激发态动力学过程进行了研究,实验中观察到该分子能级间的量子拍频现象,并获得了第一单重激发态寿命及其拍频频率,阐述了飞秒激光场下间位二氯苯分子的电离解离机理.     

Bruker MSL系列核磁谱仪的数字化改造

提出并实现了对BrukerMSL系列核磁谱仪进行高技术低成本的数字化改造 ,该系统具有产生形状脉冲的2个全频段射频通道和一个数字接收机 ,有进行最新核磁实验的功能     

Simultaneous flow injection analysis of cadmium and lead with differential pulse voltammetric detection

A flow injection (FI) method using multiple differential pulse voltammetric detection for the simultaneous determination of two metal ions was developed and applied to the resolution of Cd(II)-Pb(II) mixtures. The metals are detected by applying two sequential pulses to a three-electrode voltammetric system that uses a flow-through cell accommodating a static mercury-drop working electrode. The influence of the electrode area, flow-rate, pulse frequency, pulse width and sampling time was investigated. Under the experimental conditions used, the two metals were found to interfere with each other. The use of a neural network allows the simultaneous determination of both, in mixtures, with good accuracy. The proposed method is applicable to other complex systems involving different working electrodes and more than two electroactive species.     

Real-time correction of counting losses in nuclear pulse spectroscopy

Reviewing the current status of real-time correction of counting losses in nuclear pulse spectroscopy, the pileup problem is identified as the last question not resolved satisfactorily up to now. Correction of pileup losses in provided, at least in principle, by the classical pulse generator method, however, severe limitations in test frequency prohibit its application to real-time correction of counting losses. A solution is offered by the novel principle of the virtual pulse generator which obviates the shortcomings of the classical method simply by not introducing pulses into the spectroscopy system. Instead, the probability for pileup-free pulse processing is determined by suitable tests of the system status at arbitrarily high test frequencies. After a discussion of the principles of the new method and its application to a real-time correction system experimental evidence is provided for the complete correction of counting losses of more than 98% under conditions of stationary as well as variable counting rates up to the limit of stable operation of the underlying spectroscopy system which is 800 000 c/s for an experimental high-rate gamma spectrometer.     

Pulse mode operation of Love wave devices for biosensing applications

In this work we present a novel pulse mode Love wave biosensor that monitors both changes in amplitude and phase. A series of concentrations of 3350 molecular weight poly(ethylene glycol) (PEG) solutions are used as a calibration sequence for the pulse mode system using a network analyzer and high frequency oscilloscope. The operation of the pulse mode system is then compared to the continuous wave network analyzer by showing a sequence of deposition and removal of a model mass layer of palmitoyl-oleoyl-sn-glycerophosphocholine (POPC) vesicles. This experimental apparatus has the potential for making many hundreds of measurements a minute and so allowing the dynamics of fast interactions to be observed.     

The high strain-rate behaviour of three molecular weights of polyethylene examined with a magnesium alloy split-Hopkinson pressure bar

A traditional split-Hopkinson pressure bar system has been modified by the addition of ZK60A magnesium alloy pressure bars in order to increase the resolution of data when examining specimens of low-density, high-density and ultra-high molecular weight polyethylene. It was found that the low density of the ZK60A allowed a decent increase in transmitted pulse amplitude, whilst its relatively high yield strength afforded long-term reliability of the system. The accuracy of data obtained from the fitted strain gauges was verified with the use of a high-speed video camera, and was found to be an excellent match.     

高阻抗电化学体系恒电位脉冲暂态过程研究

提出一套恒电位脉冲测量暂态电流的技术,通过累加生成处理,可大大降低曲线的噪声,再由非等间距的差分处理,可对电化学体系时间常数作出简便的判定,还分析了脉冲幅度以及溶液电阻的作用,并在Fe/H_3BO_3＋Na_2B_4O_7体系和碳钢／砂土体系中对该方法进行了验证。     

Pulse radiolysis system based on ELU-6E LINAC

Basic parameters and operating characteristics of the linear microwave accelerator ELU-6 and pulse radiolysis system are given. LINAC can operate in single pulse mode or with repetition of 10 to 200 pps. In nanosecond mode electron pulses of 7, 10 and 17 ns, beam currents10 A and an energy of 8 MeV are generated. In microsecond mode, duration of pulses can be varied from 0.3 to 4.5 s, beam current up to 1.2 A and energy not less than 5 MeV are available. Versatile pulse radiolysis system enables routine optical measurements in the range from 350 to 2500 nm on the time scale from 10 ns to a few seconds. Transient signals are recorded by a 400 MHz storage Tektronix oscilloscope or by an IWATSU TS8123 digital oscilloscope linked to an Apple II microcomputer incorporated into the Institute computer system. A set up for pulse conductivity measurements with s resolution time is also available.     

Surface elemental mapping using glow discharge—optical emission spectrometry

A glow discharge optical-emission spectrometry source was evaluated for use in imaging elemental surface distributions. A 1.8 cm² area of a nickel–chromium alloy was sampled and copper emission was observed directly above the surface of a copper inclusion. By pulsing the glow discharge, the resolution was improved greatly over measurements using direct-current powering. Ranges of gas flows, pulse frequencies, pulse potentials, pulse widths, and pressures were explored to determine their effects on spatial resolution and were related to atom transport in the glow discharge cell. Pressure, pulse width, and pulse frequency were all found to have a significant effect on resolution.