水杨醛缩天冬酰胺Schiff碱稀土配合物的合成与抗·O-2生物活性

合成了水杨醛缩天冬酰胺的系列稀土配合物, 通过熔点测定、元素分析、摩尔电导率、磁化率、 TG-DTA、 UV、 IR、 1H-NMR、 EPR谱等对配体及配合物的组成进行了表征, 得到配合物的可能组成为RE3(AS)2(NO3)5·3C2H5OH·H2O. 磁化率数据表明配合物为三中心结构, 摩尔电导率数据表明配合物为1∶2型电解质, 即2个NO3-在外界, 3个NO3-在内界. TG-DTA, IR, 1H-NMR等分析表明水分子参与配位, CO2-, NO3-均以双齿配位, Nd3+的顺磁位移效应使与之相邻质子的1H-NMR位移值增大. 抗超氧阴离子自由基(·O-2)实验表明, 配合物具有显著的抗·O-2生物活性.     

稀土6-甲基皮考林酸氮氧化物及2,2'-联吡啶N,N'-二氧化物三元配合物的合成与性质

合成了稀土与 6 甲基皮考林酸氮氧化物 (HL)及 2 ,2′ 联吡啶 N ,N′ 二氧化物 (bipyO2 )的三元固体配合物LnL3bipyO2 ·nH2 O(Ln =La3 ,Sm3 ,Eu3 ,Gd3 ,Tb3 ,Dy3 ,Yb3 )。元素分析、差热 热重分析、红外光谱、摩尔电导及X射线粉末衍射等分析结果表明 :配合物的组成为 {Ln(C7H6 O3N) 3·(C10 H8N2 O2 )·H2 O}(n -1 )H2 O(n =2 5～ 3 0 )。荧光光谱表明 :三元配合物LnL3bipyO2 ·nH2 O的荧光强度比二元配合物LnL3·mH2 O的要弱 ,与二元配合物不同的是 :TbL3bipyO2 ·3H2 O在 4 89 3nm处峰的相对强度比 543 8nm处峰的相对强度要强。     

稀土离子与2,9-二甲基-1,10-菲罗啉的α-氨甲基吡啶衍生物的二元配合物的稳定性研究

在25 0±0.1℃,0.1mol·L-3NaClO4的条件下,用pH电位滴定法测定了配体2,9 二甲基 1,10 菲罗啉的α 氨甲基吡啶衍生物 N,N′ 二 α 吡啶甲基 1,10 菲罗啉 2,9 二甲胺(L)在水溶液中分别与稀土离子Ln(Ln=La3+,Ce3+,Pr3+,Nd3+,Sm3+,Eu3+,Gd3+,Tb3+,Dy3+,Ho3+)的二元配合物的稳定常数。提出了配合物在溶液中的可能结构。对金属离子对配合物稳定性的影响进行了详细的讨论,并比较讨论了稀土离子和其它金属离子如Co2+,Ni2+,Cu2+等与配体L的所形成配合物的稳定性差异的原因。运用线性回归,对有放射性的Pm3+与相应配体的二元配合物的稳定常数进行了推测。     

镝(III)与酰腙及1,10菲啰啉多元配合物的晶体结构及荧光性质

在水乙醇混合体系中 ,首次得到 2 羰基丙酸水杨酰腙 (C10 H10 N2 O4) ,1,10 菲啉 (C12 H8N2 ,简写作phen)与Dy(NO3 ) 3 ·3H2 O的配合物 [Dy(C10 H8N2 O4) (phen) (NO3 ) (H2 O) 2 ]·H2 O .该配合物属单斜晶系 ,空间群为P2 1/c,晶胞参数a =1 5 2 4( 3 )nm ,b =1 10 18( 19)nm ,c =1 468( 3 )nm ,β =92 2 8( 2 )° ,V =2 4 63 ( 7)nm3 ,Z =4,μ =3 10 0mm-1,Dc=1 83 1g/cm3 ,F( 0 0 0 ) =13 40 ,R =0 0 3 14 ,wR =0 0 660 ,GOF =0 966.测试结果表明 ,该单晶结构为镝的 9配位配合物 ,其中一个 2 羰基丙酸水杨酰腙分子以羧基氧、酰胺基中的羰基氧和CN中的氮与Dy3 + 三齿配位 ,形成两个稳定的共边五元环 ,一个 1,10 菲啉分子以二齿方式配位、一个硝酸根和两个水分子也同时参与配位 ,在空间呈扭曲的单帽四方反棱柱 ,而在配合物周围还有一个游离的水分子 .发光性能测试表明配合物具有很好的荧光性能     

[Eu(C10H9N2O4)(C10H8N2O4)(H2O)3]2·phen·4H2O超分子化合物的晶体结构、荧光性质及热稳定性

在水-乙醇混合体系中,以2-羰基丙酸水杨酰腙(C10H10N2O4,简作H3L)、1,10-菲啰啉C12H8N2,简作phen)与Eu(NO3)3·4H2O反应,首次培养出黄色单晶[Eu(C10H9N2O4)(C10H8N2O4)(H2O)3]2·phen·4H2O.该晶体属三斜晶系,P1空间群,晶胞参数a=1.378 6(12) nm,b=1.398 8(12) nm,c=1.759 7(16) nm,α=73.977(11)°,β=68.598(12)°,γ=71.224(12)°,V=29.42(4) nm3,Z=2,μ=2.208 mm-1,Dc=1.746 Mg/m3,F(000)=1 556,R=0.037 7,ωR=0.074 4,GOF=0.916.每个配合物晶体中均有两个相似的结构单元,每个结构单元中铕(Ⅲ)配位数为9,分别与两个2-羰基丙酸水杨酰腙和3个水分子配位; 每个2-羰基丙酸水杨酰腙中的羧基氧、酰胺基中的羰基氧和CN中的氮与Eu3+配位,形成两个共边的稳定的五元环,另3个配位原子则分别来自3个水分子中的氧原子,该结构单元在空间呈扭曲的单帽四方反棱柱,而在每两个铕的九配位单元周围还有一个游离的1,10-菲啰啉分子和4个水分子.IR,1H NMR及热分解结果佐证了配合物的组成.该配合物具有很好的荧光特性.     

单核Zn(Ⅱ)/Ni(Ⅱ)含氮配体配合物的合成、晶体结构及性质

合成了2个新的配合物[Zn(BPP)2(H2O)4](2,6-NDS)·0.5H2O(1)和[Ni(phen)2(H2O)2](A-2,5-DSA)·3H2O(2)(2,6-NDS=2,6-萘二磺酸根,A-2,5-DSA=苯氨-2,5-二磺酸根,BPP=1,3-二(4-吡啶基)丙烷,phen=1,10-邻菲咯啉),用X-射线单晶衍射结构分析方法测定了配合物的晶体结构。配合物1是单核分子,Zn2+离子与2个1,3-二(4-吡啶基)丙烷的2个N原子及4个水分子配位,形成单核配位阳离子。相邻配位阳离子通过配位水分子与氮原子的氢键作用联接成一维双螺旋阳离子链。双螺旋阳离子链与未配位的2,6-萘二磺酸根阴离子通过氢键作用形成二维超分子网。配合物2是单核分子,Ni2+离子与2个1,10-邻菲咯啉分子中的4个N原子及2个水分子配位,形成单核配位阳离子。配位阳离子与游离的水分子及苯氨-2,5-二磺酸根阴离子通过氢键作用构筑成二维超分子网。     

环糊精与烷基钴配合物分子识别作用的DFT研究

用密度泛函理论(DFT)的B3LYP方法对Costa型烷基钴配合物[n-C6H13Co(C11H19N4O2)·H2O]+(A)和烷基钴肟配合物n-C6H13Co(C8H14N4O4)·H2O(B)进行计算研究,探讨了环糊精对它们的分子识别作用与其电荷分布之间的关系.结果表明,由于A和B的轴向烷基都是中性的,而且它们的烷基均插入环糊精腔内,而使A或B与环糊精形成包结物,因此,在环糊精边上修饰负离子不能加强其对+1价的Costa型配合物的识别作用,平面配体的类型及电荷对分子识别影响也不大.     

L-α-氨基酸铜(Ⅱ)-联吡啶混配配合物的合成及表征

合成了 4种氨基酸 铜 (Ⅱ ) 2 ,2′ 联二吡啶 (Bpy)的混配配合物 ,用元素分析、摩尔电导率、IR和UV -Vis对配合物进行了表征和结构推测。 4种混配配合物的组成分别为 :[Cu(Bpy) (L thre) ]·ClO4·H2 O ,[Cu(Bpy) (L ile) ]·ClO4·0 .5H2 O ,[Cu(Bpy) (L meth) ]·ClO4·0 .5H2 O ,[Cu(Bpy) (L ly) ]·ClO4·H2 O(L thre为苏氨酸 ,L ile为异亮氨酸 ,L meth为蛋氨酸 ,L ly为赖氨酸 )。Bpy和L 氨基酸皆作为双齿配体与中心铜离子发生配位。     

原位[2+3]环合成法制备四唑化合物、结构及荧光性质(英文)

利用氰基吡啶(4-氰基吡啶和3-氰基吡啶)与稀土硝酸盐作用(Ln=Nd,Eu,Yb),通过原位[2+3]环加成反应合成得到了4个稀土四唑离子型化合物,Ln(H2O)8·3(p-TPD)·2(p-HTPD)·7H2O),(Ln=Nd(1),Eu(2),Yb(3)),p-TPD=4-tetrazoylpyridine,p-HTPD=protonated 4-tetrazoylpyridine)以及Ln(H2O)8·3(m-TPD)·6H2O(m-TPD=3-tetrazoylpyridine,Ln=Yb(4))。X-射线单晶结构分析显示,在配合物1~4中,稀土金属离子与配体分别处于不同的两层,[Ln(H2O)8]3+结构单元与p-TPD以及水分子通过氢键作用形成阳离子层(A层),同时p-TPD与p-HTPD通过π-π堆积与氢键作用形成阴离子层(B层)。固态荧光分析表明,配合物1,2,4在405、400、494 nm处出现了最大强度的发射峰值;而配合物3在618、592及462 nm出现了最大强度的发射峰值。热重分析表明配合物1~4在70~120℃范围内有1个失重,而在180~220℃范围内配合物开始分解。     

含吡唑啉酮三脚架结构的化合物及其稀土配合物的合成、表征及荧光性能

合成了一种含吡唑啉酮的三脚架结构化合物 1,1,1 三 { 1′ [2′ 氧杂 5′ 氧代 5′ ( 1″ 苯基 3″ 甲基吡唑啉酮 4″ 基 )戊基 ] }丙烷 (H3 L)及其 7个稀土配合物。通过元素分析、摩尔电导、质谱、红外光谱、核磁共振谱、荧光光谱等对H3 L及其稀土配合物的组成及性质进行了表征。分析结果表明 :H3 L的分子式为C45H50 N6O9,配合物的组成比为REL·0 5H2 O (RE =La ,Sm ,Eu ,Gd ,Tb ,Dy ,Yb) ;该三脚架形配体分别以醚氧、烯醇氧及吡唑酮环上的羰基氧与稀土离子进行配位 ,形成内配型配合物。荧光光谱分析表明SmL·0 5H2 O ,EuL·0 5H2 O ,TbL·0 5H2 O ,DyL·0 5H2 O配合物具有三价稀土离子的特征线状荧光 ,其中TbL·0 5H2 O的荧光强度最强 ,表明T(配体 )→5D4(Tb)能级更为匹配 ,从而进行分子内能量有效传递 ;由EuL·0 5H2 O的荧光光谱图形推测 ,Eu3 +离子在该配合物中处于非对称中心     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.