Synthesis of chiral tripeptides by asymmetric hydrogenation of dehydrotripeptides. Remarkable effects of N-protecting groups on stereoselectivity and reactivity

Dehydrotripeptides, X-$\text{C}\text{*}$CH(Rⁱ)-ΔPhe-$\text{C}\text{*}$CH(R^k)COOMe ($\text{3}$: X = ^tBOC-NH,CBZ-NH, CF₃CONH and N₃), were employed for the asymmetric hydrogenation catalyzed by chiral rhodium complexes and it was found that ^tBOC-$\text{3}$ brought about by far the best results. Stereoselective dideuteration of a ^tBOC-$\text{3}$ was successfully performed.     

Dynamic metal-ligand coupling in the infrared MCD spectra of the cobalt(II) tetrahalides

The axial single-crystal magnetic circular dichroism spectra of Cs₃ZnCl₅/Co²⁺ and Cs₃ZnBr₅/Co²⁺ have been measured over the 4000–7000 cm^?1 region of the ⁴A₂ → ⁴T₁ (F) transition at ambient and liquid-helium temperature. The B/D and C/D terms obtained give transition moment ratios, 〈t₂∥m∥t₂〉/〈e∥m∥t₂〉, in accord with the value required (?3^{$\text{1}\text{2}$}/2^{$\text{1}\text{2}$}) by a dynamic ligand-polarisation model for d-electron transition probabilities in tetrahedral metal complexes.     

Bond functions for AB initio calculations. MCSCF results for CH,NH, OH and FH

Separate optimized s and p bond functions (BFs) were added to the corresponding Dunning basis sets (11s,6p15s) → (5s,4p13s) for the four hydrides. Properties calculated with these basis sets are quasi-identical to those obtained with conventional polarization functions (d_lp). The computer time ratios found are: t(BF)/t(dlp) = $\text{1}\text{2}$ for UHF calculations, and $\text{2}\text{3}$ for MC SCF calculations.     

An unusual example of a rapid spin-equilibrium iron complex

Bis(N-(1-benzoyl-2-propylidene)-2-pyridylmethylaminato)iron(III) hexafluorophosphate (Fe(bzpa)₂PF₆ is shown to be a spin-equilibrium compound between low- (S = $\text{1}\text{2}$) and high- (S = $\text{5}\text{2}$) spin states depending on temperature, and to have the unusual property that the relaxation time of the spin change is shorter than the Mössbauer lifetime (1 × 10^?7s) of iron- 57 (l = $\text{3}\text{2}$) in the solid state.     

A study of the Li1+xTi2−xO4 spinel system by diffuse-reflectance spectroscopy

The room-temperature diffuse-reflectance spectra of compositions within the Li_1+xTi_2?xO₄ spinel system ($\text{0 ≤ x ≤}\text{1}\text{3}$) show three absorption bands in the range 4000 to 48,000 cm^?1. Two high-energy absorption bands correspond to charge-transfer transitions from the oxygen-2p valence band to the titanium t_2g and σ1 conduction bands, where the σ1 band of e_g character has hybridized titanium-3d and titanium-4s parentage. The absorption band arising from promotion of electrons to the empty σ1 band does not alter with composition whereas the absorption band arising from promotion of electrons to the partially filled t_2g band narrows as the concentration of conduction electrons in the t_2g band decreases. These two high-energy absorption bands fall entirely within the ultraviolet spectral region, and the absorption edge in $\text{Li}{}_{\mathrm{<mtext>4</mtext><mtext>3</mtext>}}\text{Ti}{}_{\mathrm{<mtext>5</mtext><mtext>3</mtext>}}\text{O}{}_4\text{(x =}\text{1}\text{3}\text{)}$ occurs at 24,300 cm^?1 (3.02 eV). A low-energy absorption band is observed in compositions with $\text{x <}\text{1}\text{3}$ and in samples of $\text{Li}{}_{\mathrm{<mtext>4</mtext><mtext>3</mtext>}}\text{Ti}{}_{\mathrm{<mtext>5</mtext><mtext>3</mtext>}}\text{O}{}_4$ reduced in hydrogen at elevated temperatures. This band straddles the boundary between the visible and infrared spectral regions and shifts toward lower energy as the concentration of conduction electrons in the t_2g band decreases. The possible origins of the band are discussed; the argument is in favor of a d-d interband transition from states in the partially filled t_2g band to states in the empty σ1 band.     

Conformation,in solution,of c-4-t-butyl-1-phenyl-r-1-(N-piperidyl)cyclohexane hydrochloride. The conformational energy of t-butyl

Although the hydrochloride of $\text{c}$-4-$\text{t}$-butyl-1-phenyl-$\text{c}$-1-(N-piperidyl)cyclohexane crystallizes in the conformation with axial $\text{t}$-butyl, it exists as an almost equimolar mixture of the two chair conformers in CD₂ Cl₂ solution. The position of equilibrium allows one to calculate ΔG°_{$\text{t}$-Bu} as ?4.9 kcal/mol.     

New 1,1-amino hydroperoxides from regioselective oxygenation of 4-(n-arylmethyleneamino)-2,6-di-t-butylphenols.

The oxygenation of 4-(N-arylmethyleneamino)-2,6-di-$\text{t}$-butylphenols with Co(Salpr), a five coordinate Co(II0 Schiff base complex, in CH₂Cl₂ results in the regioselective hydroperoxylation at the imino carbon to give N-(l-aryl-l-hydroperoxymethyl)-3,5-di-$\text{t}$-butyl-$\text{p}$-benzoquinone monoimines, which give exclusively the corresponding amides and 2,6-di-$\text{t}$-butyl-$\text{p}$-benzoquinone in an aerobic solution of KOH in 90% EtOH.     

Phase transitions in a Cs2−xK1+xBiCl6 solid solution

A solid solution with a Cs_2?xK_1+xBiCl₆ (0 ≤ x ≤ 1) formulation and an elpasolite-related structure was prepared. At room temperature the symmetry is cubic (Fm3m) for x = 0 and triclinic $\text{(P}\text{I}\text{)}$ for x ≠ 0. For 0 ≤ x ≤ 1, various techniques enabled us to detect a phase transition of the ferroelastic-paraelastic type at t_c (°C) temperature. The t_c and ΔH_tc values are correlated to the size of the alkali ions.     

Contribution à l'étude structurale de la wüstite solide de haute température

The structure of wüstite Fe_1?zO is studied by neutron diffraction on one polycrystalline sample under equilibrium conditions at high temperature. The mean isotrope temperature factor B is expressed as a sum of two parts, B_Th and B_St, which vary linearly with a single parameter, respectively temperature and z. A classification is established for clusters ($\text{m}\text{n}$) settled from m vacancies in octahedral sites and n Fe^III ions in interstitial sites. Sixteen values have been experimentally determined for the vacancies to interstitials ratio $\text{? =}\text{(z + t)}\text{t}\text{=}\text{m}\text{n}$. A constant value of ?, which is lower than 3, is observed. This result characterizes the short-range order. It eliminates several possibilities of clusters like those obeying the relation $\text{? =}\text{(1 + 3n)}\text{n}$. Other clusters, namely ($\text{16}\text{6}$) or ($\text{40}\text{14}$), might agree. The ($\text{8}\text{3}$) and ($\text{9}\text{4}$) clusters obtained from ($\text{4}\text{1}$) clusters joined by an edge would be the more likely. An analysis of diffuse scattering eliminates the hypothesis of large domains with inverse spinel structure. The structural differences between the three varieties W₁, W₂ and W₃ would not be found in a structural change of clusters.     

Fast neutron activation analysis of bulk coal samples for alumina,silica and ash

The fast neutron activation technique was applied to bulk samples (≈11 kg) of Australian black coal. The determination of alumina is based on the reaction ²⁷Al(n,p)-²⁷Mg by counting the 0.844-MeV peak (t_{$\text{1}\text{2}$} = 9.4 min). Silica is determined by means of the reaction ²⁸Si(n,p)²⁸Al; the 1.78-MeV peak (t_{$\text{1}\text{2}$} = 2.3 min) is counted and a correction for the interference from alumina is applied. The ash content is based on the correlation between ash and the sum of alumina and silica. The accuracies (1 SD) for the determination of alumina, silica and ash were 0.52% Al₂O₃, 0.79% SiO₂ and 1.02% ash, respectively. The ash, alumina and silica contents of the samples were in the ranges 8.8–37.5%, 1.3–10.3% and 6.4–22%, respectively.     

Reaction of superoxo Co(III) complexes with 2,6-di-t-butyl-p-benzoquinone methides

Superoxo Co(III) complexes derived from Co(Salpr) and [Co(CN)₅]^3? reacted with 2,6-di-$\text{t}$-butyl-$\text{p}$-benzoquinone methides to give 2,6-di-$\text{t}$-butyl-$\text{p}$-benzoquinone and 2,6-di-$\text{t}$-butyl-2,5-cyclohexadienonespirooxiranes as the main products, which are considered to result from nucleophilic attack by the superoxo species on the exo double bond of the quinone methides.     

Determination of antimony in geochemical samples by graphite furnace atomic absorption spectrometry using different matrix modifiers

Determination of antimony by graphite furnace atomic absorption spectrometry using five different matrix modifiers, viz. nitric acid, copper, nickel, molybdenum and palladium, together with L'vov platform was studied. Without matrix modification, antimony was lost in a 1.2-M HCl solution when the thermal pretreatment temperature exceeded 700°C. By using 1.4 M HNO₃ or $\text{1μg}\text{20μl}$ copper solution the thermal pretreatment temperature could be increased up to 900°C. The matrix modification with $\text{2μg}\text{20μl}$ palladium, $\text{4μg}\text{20μl}$ molybdenum, or $\text{20μg}\text{20μl}$ nickel allowed the use of 1300°C as the pretreatment temperature. The best results were obtained with palladium when its concentration exceeded $\text{0.8μg}\text{20μl}$. Chemical interferences were studied with standard solutions spiked with different metal chlorides. The severe interference caused by iron chloride was avoided with ascorbic acid (2.5 %, $\text{w}\text{v}$). The method was tested on some geochemical reference samples.     

The spectrophotometric determination of nitrate in natural waters,with particular reference to sea-water

Nitrate can be reduced to nitrite in good yield by means of hydrazine in alkaline solution; the reaction is promoted by catalytic quantities of copper. The authors have established the optimum conditions for tlie reduction and applied the method to the determination of nitrate in fresh waters and in sea-waters. The nitrite formed is determined by Mellon and Rider's modification of the Griess-Ilosvay procedure. The reduction with hydrazine is carried out in the presence of 0.25 p.p.m. of copper at pH 9.6 in a solution buffered with sodium phenate. It is complete within 24 hours at room temperature. The method will detect ca. 0.3 μg NO₃$\text{N}\text{l}$ and gives a standard deviation of ca. 2% in the range 20-600 μg NO₃-$\text{N}\text{l}$. Up to 60 determinations can be made per 6 hour working period. The interference of nitrite has been investigated. Ammonium salts, urea, and amino acids do not interfere, at the concentrations at which they occur in sea-water.It is preferable to analyse samples immediately after collection, but if this is not possible, they should be filtered, sterilized with 2 p.p.m. of mercuric chloride and stored in glass containers.     

Transition metalcarbon bonds: LV. Cyclometallation and other reactions of PBut2Bui and PPh2Bui with platinum(II) and palladium(II)

The new phosphine, PBu^t₂Buⁱ (L), was prepared from Bu^t₂PCl and LiBuⁱ. PPh₂Buⁱ (L′) was prepared from Ph₂PCl and LiBuⁱ. Treatment of [PtCl₂(NCBu^t)₂] with L′ gives [PtCl₂L′₂] which does not cyclometallate even on prolonged boiling in 2-methoxyethanol. In contrast, [PtCl₂(NCBu^t)₂] reacts with PBu^t₂Buⁱ in boiling 2-methoxyethanol to give the cyclometallated complex [$\text{Pt}{}_2\text{Cl}{}_2\text{(PBu}{}^{\mathrm{t}}{}_2\text{CH}{}_2\text{-CHMeCH}$₂)₂] (II, X = Cl). The corresponding bromide, iodide and acetylacetonate were prepared. With PPh₃ II (X = Cl) gives [$\text{PtCl(PBu}{}^{\mathrm{t}}{}_2\text{CH}{}_2\text{CHMeCH}$₂)(PPh₃)] which with NaBH₄ gives [$\text{PtH(PBu}{}^{\mathrm{t}}{}_2\text{CH}{}_2\text{CHMeC}$H₂)(PPh₃)]. Na₂PdCl₄ with L (2 mol equivalents) gave trans-[PdCl₂L₂], which was converted into trans-[Pd(NCS)₂-L₂] by metathesis with KSCN. Treatment of Na₂PdCl₄ with L (1 mol equivalent) gave [Pd₂Cl₄L₂], which on heating in 2-methoxyethanol gave [$\text{Pd}{}_2\text{Cl}{}_2\text{(PBu}{}^{\mathrm{t}}{}_2\text{CH}{}_2\text{-CHMeCH}$₂)₂], as a mixture of syn- and anti-isomers. The complexes trans-[PdCl₂-L′₂] and [Pd₂Cl₄L′₂] were also prepared. ¹H- and ³¹P NMR data are given.     

New tetrahydropyrans from a marine sponge

Two new tetrahydropyrans have been isolated from the sponge Haliclona sp. From chemical and spectroscopic evidence they are shown to be (1′$\text{R}$, 2$\text{S}$, 2″$\text{E}$, 5$\text{R}$, 6$\text{R}$)-2-(1′-bromethyl)-2,5-dimethyl-6-(penta-2″,4″-dienyl)-tetrahydropyran and (1′$\text{R}$, 2$\text{S}$, 5$\text{R}$, 6$\text{R}$)-2-(1′-bromoethyl)-2,5-dimethyl-6-(pent-4″-enyl)-tetrahydropyran.     

Electron transfer reactions between pentafluorobenzoyl peroxide and dimethoxybenzenes

Pentafluorobenzoyl peroxide (FBP) reacted rapidly with dimethoxybenzenes in F₁₁₃ (CCl₂FCClF₂) with kinetics of first order in each component. High yields of ring-substituted esters of $\text{m}$-dimethoxybenzene ($\text{m}$-DMB) and $\text{p}$-dimethoxybenzene ($\text{p}$-DMB) were obtained, whereas for 2,5-di-$\text{t}$-butyl-1,4-dimethoxybenzene (DBDMB), the $\text{t}$-Bu group was simultaneously eliminated. For 2,5-dimethyl-1,4-dimethoxybenzene (DMDMB), the benzylic hydrogen was substituted. Rate and product studies both indicate a rate-determining electron transfer step leading to radical ion pairs which collapse to products.     

A general synthesis of primary prostaglandins

Combination of ($\text{R}$)-4-$\text{t}$-butyldimethylsiloxy-2-cyclopentenone, ($\text{S}$)-($\text{E}$)-3-$\text{t}$-butyldimethylsiloxy-1-iodo-1-octene, and 6-methoxycarbonyl-2-hexynal via the tandem organo-copper conjugate addition—aldol reaction procedure leads directly to a 5,6-dehydroprostaglandin E₂ derivative, which can be transformed to a variety of chiral primary prostaglandins in a stereoselective manner.