Carbon clusters

Some of the most significant discoveries and achievements concerning the mass spectra and gas phase ion chemistry of carbon clusters are reviewed. These include (1) nanosecond and femtosecond laser ionizations; (2) ion structures through ion/molecule reactions, ion chromatography, and computational methods; (3) carbon cluster cooling through radiative decay, dissociative decay, and thermionic emission; (4) mechanisms and energetics of fragmentation reactions; (5) endohedral fullerenes including recent data on ion beam implantation, and (6) ion chemistry as a function of the fullerene charge state.     

Transport of ionic species through functionalized poly(vinylbenzyl chloride) membranes

Solid polymeric membranes of poly(vinylbenzyl chloride) (VBC), lightly crosslinked with divinyl benzene, were incompletely reacted such that a fraction of the benzyl chlorines in different membranes was replaced with either dimethyl phosphonate esters (MPE) or triethyl ammonium chloride groups (QA). This work was conducted in an effort to investigate ionic transport through charged and uncharged membranes and to develop fixed site carrier membranes to facilitate the transport of selected metal ions from an aqueous feed stream to a concentrated acid receiving stream. Bulk solution flow does not occur through these membranes. Instead, solute diffusion occurs through the membrane matrix. The effects of hydrogen ion gradient, metal ion identity and charge, reactive site type, acid type, and ionic strength on metal ion transport were investigated. Results are also presented on the effect of membrane orientation and pretreatment (swelling) on metal ion transport. Facilitated transport was investigated through the testing of membranes with varying MPE percent functionalization. The results presented compare the metal ion transport rate to the functionalization of the membranes.     

Transport of ions through the oil phase of W(1)/O/W(2) double emulsions

Using a capillary video microscopy technique, the ion transport at liquid-liquid interfaces and through a surfactant-containing emulsion liquid membrane was visually studied by preparing a double emulsion globule within the confined space of a thin-walled, transparent, cylindrical microtube. NaCl and AgNO(3) were selected as the model reactants and were prepared to form a NaCl/AgNO(3) pair across the oil film. By observing and measuring the formed AgCl deposition, it was found that both Cl(-) and Ag(+) could transport through a thick oil film and Ag(+) was transported faster than Cl(-). Interestingly, the ion transport was significantly retarded when the oil film became extremely thin (<1 microm). The results suggested that the transport of ions mainly depends on the "reverse micelle transport" mechanism, in which reverse micelles with entrapped ions and water molecules can be formed in a thick oil film and their construction will get impeded if the oil film becomes extremely thin, leading to different ion transport rates in these two cases. The direction of ion transport depends on the direction of the osmotic pressure gradient across the oil film and the ion transport is independent of the oil film thickness in the investigated thick range. Ions with smaller Pauling radii are more easily entrapped into the formed reverse micelles and therefore will be transported faster through the oil film than bigger ions. Oil-soluble surfactants facilitate ion transport; however, too much surfactant in the oil film will slow down the ion migration. In addition, this study showed no support for the "molecular diffusion" mechanism of ion transport through oils.     

二乙胺分子的多光子电离："梯转换"过程

The multiphoton ionization (MPI) of diethylamine is first reported in this paper. A time-of-flight mass spectrometer was used in the experiment under collision-free condition. MPI mass spectra were measured in the region of 464 ～486 nm using a dye laser and at double frequency of a Nd:YAG laser. Molecular ion was created through resonance enhanced multiphoton ionization (REMPI) via Rydberg states. Fragment, ion distribution was formed through “ladder switching” process. The experimental demonstration of the process is reported for the first time by the discussion of dependence of ion relative, abundance on laser wavelength and energy. The competition between further up-pumping and fragmentation of Parent ion also exists, and higher laser intensity favors the former.     

Transition state analysis of acid-catalyzed dAMP hydrolysis

Multiple kinetic isotope effects (KIEs) on deoxyadenosine monophosphate (dAMP) hydrolysis in 0.1 M HCl were used to determine the transition state (TS) structure and probe its intrinsic reactivity. The experimental KIEs revealed a stepwise (SN1) mechanism, with a discrete oxacarbenium ion intermediate. This is the first direct evidence for the deoxyribosyl oxacarbenium ion in solution. In 50% methanol/0.1 M HCl the products were deoxyribose 5-phosphate (dRMP) and alpha- and beta-methyl dRMP. The alpha-Me-dRMP/beta-Me-dRMP ratio was 8.5:1. Assuming that a free oxacarbenium ion is equally susceptible to nucleophilic attack on either face, this indicated that approximately 20% proceeded through a solvent-separated ion pair complex, or free oxacarbenium ion, a DN+AN mechanism, while approximately 80% of the reaction proceeded through a contact ion pair complex. The oxacarbenium ion lifetime was estimated at 10(-11)-10(-10) s. Computational transition states were found for ANDN, DN*AN, DN*AN, and DN+AN mechanisms using hybrid density functional theory calculations. After taking into account 20% of DN+AN, there was an excellent match of calculated to experimental KIEs for 80% of the reaction having a DN*AN mechanism. That is, C-N bond cleavage is reversible, with dAMP and the {oxacarbenium ion*adenine} complex in equilibrium. The first irreversible step is water attack on the oxacarbenium ion. The calculated 1'-14C KIE for a stepwise mechanism with irreversible C-N bond cleavage (DN*AN) was 1.052, in the range previously associated only with ANDN transition states, and close to the calculated ANDN value, 1.059. The 1'-14C KIE was strongly dependent on the adenine protonation state.     

Ion transmission in an electrospray ionization-mass spectrometry interface using an S-lens

We present the design and performance of an in-house built electrospray ionization-mass spectrometry (ESI-MS) interface equipped with an S-lens ion guide. The ion source was designed specifically for our ion beam experiments to investigate the chemical reactivity and deposition of the clusters and nanoparticles. It includes standard ESI-MS interface components, such as nanoelectrospray, ion transfer capillary, and the S-lens. A custom design enables systematic optimization of all relevant factors influencing ion formation and transfer through the interface. By varying the ESI voltage and flow rate, we determined the optimal operating conditions for selected silica emitters. A comparison of the pulled silica emitters with different tip inner diameters reveals that the total ion current is highest for the largest tip, whereas a tip with the smallest diameter exhibited the highest transmission efficiency through the ESI-MS interface. Ion transmission through the transfer capillary is strongly limited by its length, but the loss of ions can be reduced by increasing the capillary voltage and temperature. The S-lens was characterized over a wide range of RF frequencies and amplitudes. Maximum ion current was detected at RF amplitudes greater than 50 V peak-to-peak (p/p) and frequencies above 750 kHz, with a stable ion transmission region of about 20%. A factor of 2.6 increase in total ion current is observed for 650 kHz as RF amplitudes reach 400 V p/p. Higher RF amplitudes also focus the ions into a narrow beam, which mitigates their losses when passing through the ion guide.     

Axial focusing following low kinetic energy pulsed extraction from a miniature linear ion trap

Using an axial focusing miniature linear ion trap with tubular end cap lenses (MLIT) we have investigated spatial focusing on ion ejection using low kinetic energy pulsed extraction methods. Ion packet widths focused to ca. 1 mm (in both the radial and axial planes) are produced following collisional cooling with helium buffer gas in an MLIT. Small axial and radial packet widths as well as application of DC extraction voltages allow different ion focusing techniques to be used on batch ion extraction. In particular, controlling the position of the space focus plane (commonly used in time-of-flight mass spectrometry) following low kinetic energy ( approximately 10 eV) ion ejection from an MLIT through the application of DC extraction voltages is illustrated. Prior to simultaneous ion ejection, induced axial ion oscillation through a change in the DC potential well shape is also shown to be useful for separating and controlling different mass/charge ion packet spatial distributions in the region of an orthogonal time-of-flight (o-TOF) push pulse.     

E(2)-Elimination in the Decomposition of N-Bromoamino Acid Anions

The kinetics of oxidation of eight structurally different amino acids by hypobromite ion (BrO(-)) in the presence of hydroxide ion has been studied. The reactions proceed through the rapid formation of N-bromoamino acid anion which then decomposes in the rate-limiting step. The decomposition of N-bromoamino acid anions is found to proceed through an unimolecular and a base-catalyzed reaction. The large negative values of DeltaS() and the products formed suggest that the hydroxide ion-catalyzed reactions proceed through an E(2) mechanism. N-Bromoamino acid anion gives an absorption spectrum with lambda(max) at approximately 290 nm.     

Anion influence on extraction and transport of amino acid methyl esters by functionalised calix[4]arene

The liquid–liquid extraction of a series of amino acid methyl esters has been carried out with functionalised calix[4]arene (5,11,17,23-tetrakis(N-methylpiperazino)-25,26,27,28-tetrahydroxycalix[4]arene) from an aqueous phase into a chloroform phase as ion pairs in the presence of picrate ion or tropaeolin 00 as counter ion in order to study the molecular recognition properties of this receptor. The active transport assisted by pH gradient of amino acids as ion pairs through liquid membrane employing the functionalised calix[4]arene as carrier has been investigated. The results showed that the receptor exhibits good extractability towards amino acids and it can also act as carrier through liquid membrane aiming to the separation of amino acids. It was highlighted that the anion nature used as counter ion, the structure of calix[4]arene, and the structure of amino acids are responsible for the experimental results obtained. High yields in both amino acids extraction and transport were obtained for picrate ion used as counter ion.     

The transport of Cu(II) through a sulfonated styrene/divinylbenzene copolymer membrane

The transport of copper (II) ions through sulfonated styrene/divinylbenzene copolymer ion permeable membranes under Donnan dialysis conditions has been investigated. The flux increases strongly with the copper (II) ion concentration and temperature. The other cation transported through the membrane and its concentration can also have some influence but it is relatively small.     

Competitive ionization of tetraphenylporphyrin in a laser-generated metal ion plasma

The ionization of tetraphenylporphyrin (TPP) in a laser-desorbed metal ion plasma is examined by Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry. Competitive reaction pathways observed to generate abundant molecular ion species include electron detachment, cation attachment, charge exchange, metallation, and transmetallation in the positive ion mode and electron capture, metallation, and transmetallation in the negative ion mode. In general, cation attachment reactions dominate positive ion spectra below the laser irradiance threshold for plasma ignition, although the metallation product from [TPP]⁺ reaction with the metal atom, M, is observed. Negative ion products are not observed in the FT-ICR spectrum when a plasma is not formed. Under plasma ignition conditions, positive ion spectra include [TPP]⁺ formed by charge exchange with M⁺, which is also present in the spectrum. Negative ion spectra are dominated by [TPP]^?; which is formed by attachment to thermal electrons generated in the plasma. Metallation reactions involving TPP and the metal substrate are examined. Positive ion metallation products are observed both in the absence of a plasma through reaction of [TPP]⁺ with M and by a second pathway under plasma ignition conditions through reaction of TPP with M⁺. In negative ion mode, metallation is only observed under plasma ignition conditions through reaction of [TPP]^? with M. Observation of metallated products is found to be consistent with formation of stable metal oxidation states in the metallated porphyrin.     

Ion trajectories in an electrostatic ion guide for external ion source fourier transform ion cyclotron resonance mass spectrometry

An electrostatic ion guide (EIG) that consists of concentric cylinder and central wire electrodes can transport ions efficiently from an external ion source to an ion cyclotron resonance (ICR) ion trap for mass analysis, with several advantages over current injection methods. Because the electrostatic force of the EIG captures ions in a stable orbit about the wire electrode, ions with initially divergent trajectories may be redirected toward the ICR ion trap for improved ion transmission efficiency. SIMION trajectory calculations (ion kinetic energy, 1–200 eV; elevation angle, 0.30 °; azimuthal angle, 0.360°) predict that ions of m/z 1000 may be transmitted through a strong (0.01 → 3.0-T) magnetic field gradient. Judicious choice of ion source position and EIG potential minimizes the spread in ion axial kinetic energy at the ICR ion trap. Advantages of the EIG include large acceptance angle, even for ions that have large initial kinetic energy and large radial displacement with respect to the central z-axis, low ion extraction voltage (5–20 V), and efficient trapping because ions need not be accelerated to high velocity to pass through the magnetic field gradient.     

Ion permeability through bilayer lipid membranes for biosensor development: control by chemical modification of interfacial regions between phase domains.

Based on the results of studies on cystic fibrosis, which implicated hydroxystearic acid (HSA) as a contributing factor in altered biomembrane function, solvent-free bilayer lipid membranes (BLMs) and monolayer films were prepared from a lipid mixture containing (by mass) 34% phosphatidylcholine, 19% dipalmitoylphosphatidyl serine, 47% cholesterol and variable amounts of 10- and 12-HSA (0-50%). Ion currents, resulting from K+ permeation through BLMs that were supported in 0.1 mol dm-3 KCl solutions buffered to pH 7.4, were monitored with use of a d.c. circuit. The structures of monolayer films at the air-water interface of a Langmuir-Blodgett trough were studied by pressure-area correlations and by further correlation with microscopic phase separation as revealed by fluorescence microscopy. In order to elucidate the role of the hydroxyl moieties in ion permeability, the transmembrane ion current was corrected for the effect of the negative surface charge of the carboxylic acid by replacement of the HSA component with stearic acid. The ion current was found to increase with the molar proportion of the HSAs. Two models for ion conduction through BLMs were considered: 'hopping' via hydrophilic sites within the hydrophobic zone of the BLMs, introduced by the hydroxyl moiety of 10- or 12-HSA; and transport through interfacial regions between phase domains that represent areas of low steric density and low structural order within monolayers. Although the two mechanisms are not distinct, the ion permeability results indicate a change in the response of ion current to HSA concentration at 35 mol-%, suggesting a change in the relative proportion of the mechanisms.(ABSTRACT TRUNCATED AT 250 WORDS)     

The influence of drift gas composition on the separation mechanism in traveling wave ion mobility spectrometry: insight from electrodynamic simulations

The influence of three different drift gases (helium, nitrogen, and argon) on the separation mechanism in traveling wave ion mobility spectrometry is explored through ion trajectory simulations which include considerations for ion diffusion based on kinetic theory and the electrodynamic traveling wave potential. The model developed for this work is an accurate depiction of a second-generation commercial traveling wave instrument. Three ion systems (cocaine, MDMA, and amphetamine) whose reduced mobility values have previously been measured in different drift gases are represented in the simulation model. The simulation results presented here provide a fundamental understanding of the separation mechanism in traveling wave, which is characterized by three regions of ion motion: (1) ions surfing on a single wave, (2) ions exhibiting intermittent roll-over onto subsequent waves, and (3) ions experiencing a steady state roll-over which repeats every few wave cycles. These regions of ion motion are accessed through changes in the gas pressure, wave amplitude, and wave velocity. Resolving power values extracted from simulated arrival times suggest that momentum transfer in helium gas is generally insufficient to access regions (2) and (3) where ion mobility separations occur. Ion mobility separations by traveling wave are predicted to be effectual for both nitrogen and argon, with slightly lower resolving power values observed for argon as a result of band-broadening due to collisional scattering. For the simulation conditions studied here, the resolving power in traveling wave plateaus between regions (2) and (3), with further increases in wave velocity contributing only minor improvements in separations.     

Difluorocarbene-Induced Ring-Opening Difluoromethylation-Halogenation of Cyclic (Thio)Ethers with TMSCF2X (X=Br,Cl)**

The ring-opening difluoromethylation-halogenation of cyclic (thio)ethers is reported through a simple strategy relying on carbon-chalcogen bond activation with difluorocarbene. The reaction proceeds through in situ protonation of the previously little-known difluoromethylene oxonium or sulfonium ylide intermediate followed by ring-opening with halide ion to afford halogenated acyclic difluoromethyl (thio)ethers that can then be employed for further elaboration. TMSCF₂X (X=Br, Cl) are unique reagents to achieve this synthetic purpose, which serve as both the difluorocarbene source and the halide ion source.     

A graphene-amorphous FePO4 hollow nanosphere hybrid as a cathode material for lithium ion batteries

Amorphous FePO(4) hollow nanospheres were directly grown on graphene for use as a cathode material in lithium ion batteries. This hybrid exhibits high rate capability and good cycle stability because of efficient Li(+) ion diffusion through the thin wall of the hollow nanospheres and fast electron transport through the graphene.     

Fluorescent nanoparticles assembled from a poly(ionic liquid) for selective sensing of copper ions

Fluorescent nanoparticles were formed from a poly(ionic liquid) through ion interactions. The fluorescent nanoparticles show highly fluorescent intensity and stability to UV light irradiation and were utilized for highly sensitive and selectivity fluorescent sensor of copper ion.     

Pathways of diffusion mixed with subsequent reactions with examples of hydrogen extraction from hydride-forming electrode and oxygen reduction at gas diffusion electrode

This paper covers the role of the rate-determining step (RDS) in anodic hydrogen extraction from hydride-forming electrode. In general, hydrogen extraction from the electrode proceeds through the following steps: (1) hydrogen diffusion within the electrode, (2) hydrogen transfer from absorbed state to adsorbed state, (3) electrochemical oxidation of hydrogen to hydrogen ion involving charge transfer, and (4) hydrogen ion conduction through the electrolyte. In most theoretical and experimental investigations, it has been assumed that the RDS of anodic hydrogen extraction is hydrogen diffusion through the electrode. In real situation, however, the overall rate of hydrogen extraction is simultaneously determined by the rates of two or more reaction steps including hydrogen diffusion. The present work provides the overview of anodic hydrogen extraction in case that diffusion is coupled with interfacial charge transfer, interfacial hydrogen transfer, and hydrogen ion conduction through the electrolyte as well as the purely diffusion-controlled hydrogen extraction. In addition, the mixed controlled diffusion model was also exemplified with oxygen reduction at gas diffusion electrode of fuel cell system.     

Differentiation of stereoisomeric steroids by reactions with phosphenium ions

A chemical ionization method is reported for distinction of diastereomeric hydroxysteroids by using Fourier-transform ion cyclotron mass spectrometry (FT-ICR). Certain phosphenium ions are demonstrated to react with stereoisomeric steroids to yield qualitatively different product ions. For example, 1,3,5(10)-estratriene-3,16beta,17beta-triol (cis-estriol) reacts with the dimethoxy phosphenium ion to form a diagnostic product ion (not formed for the trans-estriol) through addition followed by the loss of two molecules of methanol. In an analogous manner, the 1,3-dioxolan-2-phosphenium ion produces a diagnostic product ion through the loss of ethylene glycol from the adduct of cis-estriol only. The 1,3,5(10)-estratriene-3,16alpha,17beta-triol (trans-estriol), on the other hand, reacts with each phosphenium ion only via hydroxide abstraction-initiated pathways that indicate the presence of at least two hydroxyl groups in the molecule. These specific reactions take place for all hydroxysteroids examined, independent of their stereochemistry. Another isomer pair, cholestan-3alpha,5alpha-diol (cis-cholestandiol) and cholestan-3beta,5alpha-diol (trans-cholestandiol), is differentiated based on selective elimination of water only from the adduct of the cis-isomer. However, the method does not allow distinction between the stereoisomeric 5beta-pregnane-3alpha,17alpha,20alpha-triol and 5beta-pregnane-3alpha,17alpha,20beta-triol. The different reactivities of the three pairs of steroid isomers and of each diastereomeric compound pair are rationalized by reaction enthalpies and steric effects based on straightforward and predictable reaction mechanisms.     

Incorporation of a flared inlet capillary tube on a Fourier transform ion cyclotron resonance mass spectrometer

Flared inlet capillary tubes have been coupled with a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer to help the ion transmission from the atmospheric pressure to the first vacuum region. We investigated different types of atmospheric pressure ionization methods using flared inlet tubes. For most of the ionization methods, such as ESI and DESI, increased ion current transmitted from the atmospheric pressure ion source to the first stage vacuum system was observed with the use of our enhanced ion inlet designs. The corresponding ion intensity detected on a FT-ICR mass spectrometer was also observed to increase two- to fivefold using ESI or DESI with the flared tube inlet. Moreover, increased spray tip positional tolerance was observed with implementation of the flared inlet tube. We also include our preliminary results obtained by coupling AP-MALDI with flared inlet tube in this paper. For AP-MALDI, the measured ion current transferred through the flared inlet tube was about 2 to 3 times larger than the ion current through the control non-flared inlet tube.